FA810616R0004.pdf

PDF 253 KB Posted Dec 21, 2015

Attached to: Aircraft and Airframe Structural Components Federal contract opportunity
Solicitation number: FA8106-16-R-0004
Issued by: Department of the Air Force Materiel Command Lifecycle Management Center Tinker Air Force Base

About this file

From the source

Please see the attached DRAFT documents for the subject acquisition. The documents include the Draft Request for Proposal and are posted to obtain industry feedback. Please provide any comments questions or concerns to the Contracting Officer at email address Edward.Adams us.af.mil by Thursday 4 February 2015. Please note that a proposal is NOT requested at this time and will NOT be accepted. This request does not obligate the Government to any contractual award. Any information provided by industry to.

View the file

Other files for this federal contract opportunity

Other files attached to Aircraft and Airframe Structural Components, newest first.
File	Type	Posted
Questions_and_Responses_to_Industry_16_Nov.xlsx	XLSX spreadsheet	Nov 17, 2016
Questions_and_Responses_to_Industry_15_Nov.xlsx	XLSX spreadsheet	Nov 14, 2016
Exhibit_A_T-1A_AMP_CDRLs_A001_to_A048_Amend_0003.pdf	PDF	Nov 3, 2016
Attachment_G_Consolidated_DIDs_Amend_0003.pdf	PDF	Nov 3, 2016
Attachment_C_Price_Matrix_Amend_0003.xlsx	XLSX spreadsheet	Nov 3, 2016
Attachment_B_SRD_Amend_0003.pdf	PDF	Nov 3, 2016
Attachment_E_Section_L_Amend_0003.pdf	PDF	Nov 3, 2016
Attachment_G_Consolidated_DIDs.pdf	PDF	Oct 14, 2016
Attachment_F_Section_M_Amend_0002.pdf	PDF	Oct 14, 2016
Questions_and_Responses_to_Industry_14_Oct.xlsx	XLSX spreadsheet	Oct 14, 2016
Attachment_H_T1A_SGFP.xlsx	XLSX spreadsheet	Oct 14, 2016
Attachment_C_T1A_Price_Matrix_Amend_0002.xlsx	XLSX spreadsheet	Oct 14, 2016
FA810616R0004_______0002.pdf	PDF	Oct 14, 2016
Attachment_D_SRD_Evaluation_Table_Amend_0002.pdf	PDF	Oct 14, 2016
Attachment_A_SOW_Amend_0002.pdf	PDF	Oct 14, 2016
Attachment_E_Section_L_Amend_0002.pdf	PDF	Oct 14, 2016
FA810616R0004_______0001.pdf	PDF	Oct 6, 2016
Attachment_C_T1A_Price_Matrix.xlsx	XLSX spreadsheet	Aug 10, 2016
Attachment_D_SRD_Evaluation_Table.pdf	PDF	Aug 10, 2016
Attachment_A_SOW.pdf	PDF	Aug 10, 2016
FA810616R0004.pdf	PDF	Aug 10, 2016
Attachment_B_SRD.pdf	PDF	Aug 10, 2016
Attachment_G_Consolidated_DIDs.pdf	PDF	Aug 10, 2016
Attachment_E_Section_L.pdf	PDF	Aug 10, 2016
Attachment_F_Section_M.pdf	PDF	Aug 10, 2016
Attachment_H_T1A_SGFP.xlsx	XLSX spreadsheet	Aug 10, 2016
Questions_and_Responses_to_Industry.xlsx	XLSX spreadsheet	Aug 10, 2016
ppi_tool.accdb	—	Jul 29, 2016
Attachment_A_SOW_Final_Draft_(2).pdf	PDF	Jun 30, 2016
Attachment_A_SOW_Final_Draft.pdf	PDF	Jun 29, 2016
Attachment_H_Consolidated_DIDs_Final_Draft.pdf	PDF	Jun 29, 2016
Attachment_F_Section_M_Final_Draft.pdf	PDF	Jun 29, 2016
Attachment_B_T-1A_SRD_Final_Draft.pdf	PDF	Jun 29, 2016
FA810616R0004.pdf	PDF	Jun 29, 2016
Attachment_C_T1A_Price_Matrix_Final_Draft.xlsx	XLSX spreadsheet	Jun 29, 2016
Attachment_E_Section_L_Final_Draft.pdf	PDF	Jun 29, 2016
Attachment_D_SRD_Evaluation_Table_June_2016.pdf	PDF	Jun 15, 2016
Attachment_F_Section_M_MAY_2016.pdf	PDF	Jun 15, 2016
Attachment_G_T-1A_AMP_CDRLs_A001_to_A048.pdf	PDF	Jun 15, 2016
Attachment_E_Section_L_May_2016.pdf	PDF	Jun 15, 2016
Attachment_B_T-1A_SRD_V7.pdf	PDF	Jun 15, 2016
Attachment_H_Consolidated_DIDs.pdf	PDF	Jun 15, 2016
Copy_of_T-1A_Industry_Questions_as_of_11_May_16_(2).xlsx	XLSX spreadsheet	May 20, 2016
T-1A_Industry_Site_Visit_Charts.pptx	PPTX presentation	Feb 8, 2016
Site_Visit_Info.pdf	PDF	Dec 21, 2015
SRD_Attachment_B.pdf	PDF	Dec 21, 2015
Section_L_Attachment_E.pdf	PDF	Dec 21, 2015
SOW_Attachment_A.pdf	PDF	Dec 21, 2015
CDRLs_Exhibit_1.pdf	PDF	Dec 21, 2015
SRD_Matrix-Attachment_D.pdf	PDF	Dec 21, 2015

Show all 50

Aircraft and Airframe Structural Components has more files on GovTribe.

On GovTribe

Work with this file on GovTribe

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

STANDARD FORM 1447 (2/2012)

Prescribed by GSA FAR (48 CFR) 53.215-1(d)

4. SOLICITATION NUMBER

FA8106-16-R-0004

6.SOLICITATION ISSUE DATE

8. THIS ACQUISITION IS UNRESTRICTED OR SET ASIDE: 100 % FOR

SMALL BUSINESS WOMEN-OWNED SMALL BUSINESS (WOSB)

ELIGIBLE UNDER THE WOSB PROGRAM

HUBZONE SMALL

BUSINESS EDWOSB

SERVICE-DISABLED VETERAN-

OWNED SMALL BUSINESS NAICS CODE: 336411

8(A) SIZE STANDARD: 1,500

DATE SIGNED

28. UNITED STATES OF AMERICA (SIGNATURE OF CONTRACTING OFFICER)

26. AWARD OF CONTRACT: YOUR OFFER ON SOLICITATION NUMBER

SHOWN IN BLOCK 4 INCLUDING ANY ADDITIONS OR CHANGES WHICH

ARE SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

Routine

THIS IS A TOTAL SMALL BUSINESS SET-ASIDE.

Subject to the terms and conditions stated herein, the Contractor agrees to hold its offered prices firm for 365 days.

DRAFT

SEE LINE ITEM SCHEDULE

22.

AMOUNT

16. AUTHORITY FOR USING OTHER THAN 10 USC 2304 41 USC 253

FULL AND OPEN COMPETITION (c) ( ) (c) ( )

DATE SIGNED

27. SIGNATURE OF OFFEROR/CONTRACTOR

20.

UNIT

21.

UNIT PRICE

19.

QUANTITY

13. CONTRACTOR OFFEROR CODE FACILITY CODE

11. IF OFFER IS ACCEPTED BY THE GOVERNMENT WITHIN * ___ CALENDAR DAYS (60 CALENDAR

DAYS UNLESS OFFEROR INSERTS A DIFFERENT PERIOD) FROM THE DATE SET FORTH IN BLK 9

ABOVE, THE CONTRACTOR AGREES TO HOLD ITS OFFERED PRICES FIRM FOR THE ITEMS

SOLICITED HEREIN AND TO ACCEPT ANY RESULTING CONTRACT SUBJECT TO THE TERMS AND

CONDITIONS STATED HEREIN. *365

RATING

DO: A1

3. AWARD/EFFECTIVE DATE

FA8106

2. CONTRACT NO.

CHECK IF REMITTANCE IS DIFFERENT

AND PUT SUCH ADDRESS IN OFFER

17.

ITEM NO.

12. ADMINISTERED BY CODE

Total

SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK: 14

SCD:B

NAME AND TITLE OF SIGNER (TYPE OR PRINT) NAME OF CONTRACTING OFFICER

24. AWARD AMOUNT (FOR GOVT USE ONLY)

23. ACCOUNTING AND APPROPRIATION DATA

SEE SCHEDULE

5. SOLICITATION TYPE

SEALED BIDS NEGOTIATED

(IFB) (RFP)

15. PROMPT PAY DISCOUNT

25. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND DELIVER ALL ITEMS SETFORTH

OR OTHERWISE IDENTIFIED ABOVE AND ON ANY CONTINUATION SHEETS SUBJECT

THE TERMS AND CONDITIONS SPECIFIED HEREIN.

10. ITEMS TO BE PURCHASED (BRIEF DESCRIPTION)

SUPPLIES SERVICES Aircraft Manufacturing

LATE OFFERS ARE SUBJECT TO LATE PROPOSAL PROVISIONS INCORPORATED HEREIN. ALL OFFERS ARE SUBJECT TO SUCH PROVISIONS, REPRESENTATIONS, CERTIFICATIONS AND SPECIFICATIONS AS ARE ATTACHED OR INCORPORATED BY REFERENCE.

SOLICITATION: OFFERS WILL BE RECEIVED AT THE ISSUING OFFICE UNTIL

-- 3:00PM

18.

SCHEDULE OF SUPPLIES/SERVICES

14. PAYMENT WILL BE MADE BY CODE

7. ISSUED BY CODE

DEPARTMENT OF THE AIR FORCE, AFLCMC WLVK

3001 STAFF DR STE 1AG1 104A

TINKER AFB OK 73145-3303

BUYER: Nicole R. Fincham/LCMC/WLKA nicole.fincham@us.af.mil Phone: (405) 734- 9025 No Collect Calls

1. THIS CONTRACT IS A RATED ORDER

UNDER DPAS (15 CFR 350)SOLICITATION/CONTRACT

BIDDER/OFFEROR TO COMPLETE BLOCKS 11, 13, 15, 21, 22, & 27.

SF 1447 (rev 2/2012) BACK

NO RESPONSE FOR THE REASONS CHECKED

TYPE OR PRINT NAME AND TITLE OF SIGNER

SIGNATURENAME AND ADDRESS OF FIRM (Include Zip Code)

WE DO NOT DESIRE TO BE RETAINED ON THE MAILING LIST FOR FUTURE PROCUREMENT OF THE TYPE OF

ITEMS INVOLVED

WE DO

OTHER (Specify)

CANNOT COMPLY WITH SPECIFICATIONS

CANNOT COMPLY WITH SPECIFICATIONS CANNOT MEET DELIVERY REQUIREMENT

FOLD

SOLICITATION NO. FA810616R0004

DUE: 3:00 PM

FROM: AFFIX

STAMP

HERE

TO:

ATTN: Nicole Fincham/LCMC/WLKA

DEPARTMENT OF THE AIR FORCE, AFLCMC WLVK

3001 STAFF DR STE 1AG1 104A

TINKER AFB OK 73145-3303

Request for Proposal FA8106-16-R-0004

PART I - THE SCHEDULE

SECTION B

SUPPLIES OR SERVICES AND PRICES/COSTS

The Government is contemplating a single integrator for the T-1A Avionics modification, including non-recurring engineering (NRE), production, installation, type 1 training and technical order preparation for this modification.

The purpose of this acquisition is to procure, engineer and install an avionics solution for the T-1A aircraft fleet of 178 aircraft, 16 simulators and 14 part task trainers. The modification will use FAA certified commercial off-the-shelf (COTS) hardware and software to replace the existing avionics system and solve obsolescence.

a.) Clauses and provisions from the Federal Acquisition Regulation (FAR) and supplements thereto are incorporated in this document by reference and in full text. Those incorporated by reference have the same force and effect as if they were given in full text. Clauses and provisions in this documents will be numbered in sequence, but will not necessarily appear in consecutive order.

c.) Representations, Instructions and Evaluations will be removed from any resultant award, but will be deemed to be incorporated by reference, in that award.

d.) LINE ITEM STRUCTURE - The Government reserves the right to add/remove Contract Line Item Numbers (CLINs). Sub Contract Line Item Numbers (SubCLINs) may be established under CLINs to accommodate various Accounting Classification Reference Numbers (ACRNs), Accounting and Appropriation Data.

e.) Price Matrix, Attachment C will be used to input prices. Prices are NOT to be provided in Section B. CLIN structure is presented for descriptive purposes only. Include prices for all CLINs on the Price Matrix, Attachment C.

f.) The principal purpose of the contract has been determined to be a supply under the terms of the Walsh-Healey Public Contracts Act (WH-PCA) however a Hybrid contract is applicable and Service Contract Labor Standards (SCLS) may apply in some instances. Both the SCLS and WH-PCA provisions are contained within the Request for Proposal and will be contained within the resultant contract. Due to the competitive nature of this acquisition contractors shall go to www.wdol.gov http://www.wdol.gov/ to obtain the appropriate SCLS wage determinations applicable to their specific state/county for use in the development of their individual proposals. If unsure about the application of the wage determination the contractor should seek guidance directly from the Department of Labor (DOL). This office shall not specify or attempt to provide advice as to the application of these laws within the structure of the contract. Only the DOL can enforce the SCLS and only DOL can determine proper SCLS classification within the authority. Contractor is required to keep the PCO/ACO advised of the current wage determination number in use and/or of any changes or pending changes to the wage determination.

g.) Kit production and installation on aircraft will be subject to funds and aircraft availability. Thus, ranges for both occurrences have been developed.

h.) CLINs under the OVER AND ABOVE FIXED PRICE PER OCCURENCE heading may not be purchased due to funding limitations associated with the requirement. The Government is not obligated to purchase these items, but may exercise its right to do so if funding is available.

i.) Clause 52.246-11 HIGHER-LEVEL CONTRACT QUALITY REQUIREMENT (Dec 2014) shall be congruent with SOW reference 4.2: "Quality Assurance Management - AS9100C, Requirements for Aviation, Space, and Defense Organizations, RTCA/DO-160G, Environmental Conditions and Test Procedures for Airborne Equipment, DO-357, User Guide: Supplement to DO-160G, and RTCA/DO-178C, Software Considerations in Airborne Systems and Equipment Certification."

j) All FY reference dates throughout Section B will be updated upon contract award.

k.) The basic performance period covers NRE through completion of the FAA certification, resulting supplemntal type certificate and Low Rate Initial Production (LRIP), if exercised. Kit production, installation and training will occur in a series of Options, beginning with Option 1 and concluding with Option 6. The Basic and Option periods are tied to completion of events rather than dates.

Therefore, the Fiscal Year that corresponds with the Option Period being exercised will be adjusted once the ending date of the Basic Period is known. Option Period 1, if exercised, follows completion of the Basic Period. Option Period 2, if exercised, follows completion of Option Period 1. Each additional Option Period, if excerised, will follow completion of the preceding Option. Options may be exercised at the sole discretion of the Government in accordance with (IAW) FAR 52.217-9 OPTION TO EXTEND THE TERM OF THE CONTRACT (MAR 2000). In the event that long lead items and kits are required to be purchased before exercising Option Period 1, items will be purchased during the Basic Period.

Prices shall be determined based upon the corresponding Fiscal Year that orders are placed IAW the Price Matrix, Attachment C.

l.) The following identifiers represent the contract period in effect for the Basic and Options periods of performance as described in paragraph j above. The numbers will be used in combination with the line item numbers, which are established in the left margin of the Line Item Schedule under the CLIN heading:

Basic Period: 0XXX Option 1: 1XXX Option 2: 2XXX Option 3: 3XXX Option 4: 4XXX Option 5: 5XXX Option 6: 6XXX j.) This contract will include performance based payments during the basic period based upon the schedule below. As the events are realized and approved by the Government, authorization will be made for payment IAW FAR 52.232-32.

Event No. Description

Event Type Severable (S) or Cumulative

Event Value SubCLIN(s)

Completion of Program Integration Review (PIR) for a ircraft modifi cations

C Successful completion of al l PIR exit cri teria as evidenced in the PIR technical review summary report

35% 0001AA

0001AB

Completion of Critica l Integration Review (CIR) for a ircraft modifi cations

C Successful completion of al l CIR exit cri teria as evidenced in the CIR technical review summary report

45% 0001AA

0001AB

Aircraft Performance Based Payment Schedule

Event No. Description

Event Type Severable (S) or Cumulative

Event Value SubCLIN(s)

Compl eti on of Program Integra tion Revi ew (PIR) for Operati ona l Fl i ght Tra iner (OFT) a nd Part-Tas k- Tra iner (PTT)

C Succes s ful completi on of a l l PIR exi t cri teria as evidenced in the PIR technica l review s umma ry report

35% 0001AC

0001AD

Compl eti on of Cri tica l Integrati on Review (CIR) for Operati ona l Fl i ght Tra iner (OFT) a nd Part-Tas k- Tra iner (PTT)

C Succes s ful completi on of a l l CIR exi t cri teria as evidenced in the CIR technica l review s umma ry report

45% 0001AC

0001AD

Simulator Performance Based Payment Schedule

THE CONTRACTOR SHALL FURNISH ALL SUPPLIES AND SERVICES NECESSARY TO PERFORM THE

FOLLOWING IAW THE TERMS AND CONDITIONS CONTAINED HEREIN:

ENGINEERING AND MANUFACTURING

Item No.

Firm Fixed Price Quantity U/I Unit Price Amount

Engineering and Manufacturing

Limitations of Liability: Other Than High Value Item

Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2008 2008

ENGINEERING AND MANUFACTURING

Buy American Act/Balance of Payments Program

SUPT ENGINEERING AND MANUFACTURING

Item No.

0001AA

Firm Fixed Price Quantity U/I Unit Price Amount

SUPT Engineering and Manufacturing The contractor shall provide engineering & manufacturing of the avionics suite for the T-1A aircraft utilized for advanced Specialized Undergraduate Pilot Training (SUPT) in accordance with (IAW) Statement of Work (SOW) Sections 3, 4, 6, and 7.

Limitations of Liability: Other Than High Value Item

CSO ENGINEERING AND MANUFACTURING

Item No.

0001AB

Firm Fixed Price Quantity U/I Unit Price Amount

CSO Engineering and Manufacturing The contractor shall provide engineering & manufacturing of the avionics suite for the T-1A aircraft utilized for training Combat System Officers (CSO) IAW SOW Sections 3, 4, 6, and 7.

Limitations of Liability: Other Than High Value Item

OFT ENGINEERING AND MANUFACTURING

Item No.

0001AC

Firm Fixed Price Quantity U/I Unit Price Amount

OFT Simulator Engineering and Manufacturing The contractor shall provide engineering & manufacturing of the avionics suite for the Operational Flight Trainer (OFT) simulators IAW SOW Sections 3, 4, 6 and 8.

Limitations of Liability: Other Than High Value Item

PTT ENGINEERING AND MANUFACTURING

Item No.

0001AD

Firm Fixed Price Quantity U/I Unit Price Amount

PTT Simulator Engineering and Manufacturing The contractor shall provide Engineering & Manufacturing of the Avionics Suite for the Part Task Trainers (PTT) simulators IAW SOW Sections 3, 4, 6, and 8.

Buy American Act/Balance of Payments Program

SUPT TEST, EVALUATION AND CERTIFICATION

Item No.

0002AA

Firm Fixed Price Quantity U/I Unit Price Amount

SUPT Test, Evaluation & Certification The contractor shall use a contractor developed, and Government approved, test and evaluation program to ensure each new SUPT system meets FAA and USAF requirements IAW SOW Sections 3, 4, 6 and 7.

Limitations of Liability: Other Than High Value Item

SUPT TEST, EVALUATION AND CERTIFICATION

CSO TEST, EVALUATION AND CERTIFICATION

Item No.

0002AB

Firm Fixed Price Quantity U/I Unit Price Amount

CSO Test, Evaluation & Certification The contractor shall use a contractor developed, and Government approved, test and evaluation program to ensure each new CSO system meets FAA and USAF requirements and IAW SOW Sections 3, 4, 6 and 7.

Limitations of Liability: Other Than High Value Item

SIMULATOR TEST, EVALUATION AND CERTIFICATION

Item No.

0002AC

Firm Fixed Price Quantity U/I Unit Price Amount

SIMULATOR TEST, EVALUATION AND APPROVAL

The contractor shall use a contractor developed, and Government approved, test and evaluation program to ensure each new simulator system meets FAA and USAF requirements and IAW SOW Sections 4, 6 and 8.

SIMULATOR TEST, EVALUATION AND CERTIFICATION

TRAINING DEVELOPMENT - TYPE 1

Item No.

Firm Fixed Price Quantity U/I Unit Price Amount

Type 1 Training Development Type 1 training for T-1A operator (pilot) and maintenance (avionics technician) training for the avionics modification shall be developed and provided by contractor IAW SOW Sections 3 and 11.

Limitations of Liability: Other Than High Value Item

TECHNICAL DATA DEVELOPMENT

Item No.

Firm Fixed Price Quantity U/I Unit Price Amount

Technical Data Development The contractor shall develop, provide and maintain Technical Data for the modified T-1A aircraft and modified simulators IAW SOW section 10.

TECHNICAL DATA DEVELOPMENT

SUPT/CSO TECHNICAL DATA DEVELOPMENT

Item No.

0004AA

Firm Fixed Price Quantity U/I Unit Price Amount

SUPT/CSO Technical Data Development The contractor shall develop, provide and maintain Technical Data for the modified T-1A aircraft IAW SOW Section 10.

Limitations of Liability: Other Than High Value Item

OFT TECHNICAL DATA DEVELOPMENT

Item No.

0004AB

Firm Fixed Price Quantity U/I Unit Price Amount

OFT Technical Data Development The contractor shall develop, provide and maintain Technical Data for the modified OFT IAW SOW Section 10.

Limitations of Liability: Other Than High Value Item

Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Receiving Report Required

OFT TECHNICAL DATA DEVELOPMENT

Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

PTT TECHNICAL DATA DEVELOPMENT

Item No.

0004AC

Firm Fixed Price Quantity U/I Unit Price Amount

PTT Technical Data Development The contractor shall develop, provide and maintain Technical Data for the modified PTT IAW SOW Section 10.

Limitations of Liability: Other Than High Value Item

CDRLS/DATA

Item No.

NSP

Quantity U/I Unit Price Amount

EA Not Separately Priced Not Separately Priced

CDRLS/DATA

The contractor shall provide CDRL data, reports, and associated deliverables IAW SOW Appendix XXX.

Limitations of Liability: Other Than High Value Item

CDRLS/DATA

TRAVEL

Item No.

Firm Fixed Price Per Event Quantity U/I Unit Price Amount

EA To be Determined To be Determined

Travel This CLIN is for unanticipated Government directed travel only. Travel under this CLIN will be Firm Fixed Price per event.

Contractor travel will be in support of the T-1A. Payment shall be made IAW FAR Part 31. Any and all travel shall bein compliance with the JTR and 10 USC Chapter 137 Sec 2324, Allowable costs under defense contracts. Travel will ONLY be permitted with concurrence of the PCO/ACO.

Limitations of Liability: Other Than High Value Item

OVER AND ABOVE

Item No.

Firm Fixed Price Quantity U/I Unit Price Amount

Over & Above IAW SOW 12, Over & Above is defined as events not considered during the original proposal, as well as any pre-existing damage to an aircraft before it enters the contractor's facility for modification. The Contractor shall coordinate all O&A through the COR and Program Office. All O&A approvals will be certified and approved by the PCO BEFORE work is started IAW SOW Sections 7.1 and 12.

Limitations of Liability: Other Than High Value Item

OVER AND ABOVE

OVER AND ABOVE WRAP RATE LABOR

Item No.

0007AA

Firm Fixed Price Quantity U/I Unit Price Amount

Over & Above Wrap Rate Labor FIRM FIXED PRICE PER EVENT AS DIRECTED BY THE ACO/PCO IAW DFARS 252.217-7028 and SOW Sections 7.1 and 12.

Limitations of Liability: Other Than High Value Item

OVER AND ABOVE ENGINEERING LABOR

Item No.

0007AB

Firm Fixed Price Quantity U/I Unit Price Amount

Over & Above Engineering Labor FIRM FIXED PRICE AS DIRECTED BY THE ACO/PCO. Over and above tasks utilzing only engineering labor shall be performed under this CLIN at the negotiated over and above engineering rate indicated in Price Matrix, Attachment C. Over and above efforts will be performed IAW DFARS 252.217-7028 and SOW Sections 7.1 and 12.

Limitations of Liability: Other Than High Value Item

OVER AND ABOVE ENGINEERING LABOR

Buy American Act/Balance of Payments Program

OVER AND ABOVE TECHNICIAN LABOR

Item No.

0007AC

Firm Fixed Price Quantity U/I Unit Price Amount

Over & Above Technician Labor FIRM FIXED PRICE AS DIRECTED BY THE ACO/PCO. Over and above tasks utilzing only technician labor shall be performed under this CLIN at the negotiated over and above technician rate indicated in Price Matrix, Attachment C. Over and above efforts will be performed IAW DFARS 252.217-7028 and SOW Sections 7.1 and 12.

Limitations of Liability: Other Than High Value Item

OVER AND ABOVE MATERIAL

Item No.

0007AD

Firm Fixed Price Quantity U/I Unit Price Amount

Over & Above Material This CLIN uses the fixed Material Handling Rate in Price Matrix, Attachment C. This rate shall represent theadministrative costs of obtaining parts and materials for Over and Above requirements. The Material Handling Rate shall represent all indirect costs plus fee associated with obtaining materials for theprime and all subcontractors. The Material Handling Rate shall be added to the material cost to determine a fixedprice amount for the material. All costs included within the fixed hourly rates, or fixed price CLINs elsewhere in thiscontract must be excluded from calculations used by the Contractor to arrive at its Material Handling Rate. All cashand trade discounts, rebates, allowances, credits, salvage, commissions, and other benefits must be taken by theContractor and applied to the benefit of the Government before the application of the Material Handling rate.Material handling rate is not allowed for Travel and Per Diem.DEFINITION OF MATERIALS: "Materials" are those parts or materials purchased, supplied, manufactured, orfabricated by the Contractor for the sole purpose of incorporating them into or making them a part of the end productsor components thereof covered by this contract.

Limitations of Liability: Other Than High Value Item

Inspection: Origin

OVER AND ABOVE MATERIAL

Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

LOW RATE INITIAL PRODUCTION (OPTION)

Item No.

Firm Fixed Price Quantity U/I Unit Price Amount

Low Rate Inital Production (Option) Encompasses all aircraft modified immediately following first article certification for purposes of proving technical data, kit proof (A & B kits), and installation into SUPT aircraft IAW SOW Section 3.4.8 and 5.6.

Buy American Act/Balance of Payments Program

LOW RATE INITIAL PRODUCTION (OPTION)

Item No.

0008AA

Firm Fixed Price Quantity U/I Unit Price Amount

Limitations of Liability: Other Than High Value Item

LOW RATE INITIAL PRODUCTION (OPTION)

Item No.

0008AB

Firm Fixed Price Quantity U/I Unit Price Amount

LOW RATE INITIAL PRODUCTION (OPTION)

Limitations of Liability: Other Than High Value Item

Option 1 CLINS

Production and Installation

Option Year 1 for Production and Installation will be exercised upon completion of the FAA certification and successful OT&E. Option CLINs 1009-1019 will be exercised in conjunction with the Option Year and will stipulate what quantities of kits and modified aircraft will be delivered.

AIRCRAFT KIT PRODUCTION (A & B)

Item No.

Firm Fixed Price Quantity U/I Unit Price Amount

Aircraft Kit Production (A & B)

Limitations of Liability: Other Than High Value Item

AIRCRAFT KIT PRODUCTION (A & B)

Buy American Act/Balance of Payments Program

SUPT/CSO A-KITS

Item No.

1009AA

Firm Fixed Price Quantity U/I Unit Price Amount

SUPT/CSO A - Kits The contractor shall provide A-Kits for modification/installation consisting of the required components to support T-1A avionics suite modification for the SUPT and CSO aircraft IAW SOW Sections 4, 5.6 and 7.4.

Buy American Act/Balance of Payments Program

OFT A-KITS

Item No.

1009AB

Firm Fixed Price Quantity U/I Unit Price Amount

OFT A - Kits The contractor shall provide A-Kits for modification/installation consisting of the required components to support T-1A avionics suite modification for the OFT IAW SOW Sections 4, 5.6 and 8.

Buy American Act/Balance of Payments Program

PTT A-KITS

Item No.

1009AC

Firm Fixed Price Quantity U/I Unit Price Amount

PTT A - Kits The contractor shall provide A-Kits for modification/installation consisting of the required components to support T-1A avionics suite modification for the PTT IAW SOW Sections 4, 5.6 and 8.

Buy American Act/Balance of Payments Program

SUPT/CSO B-KITS

Item No.

1009AD

Firm Fixed Price Quantity U/I Unit Price Amount

SUPT/CSO B - Kits

SUPT/CSO B-KITS

The contractor shall provide B-Kits for modification/installation consisting of the required components to support T-1A avionics suite modification for the SUPT and CSO aircraft IAW SOW Section 5.6.

Limitations of Liability: Other Than High Value Item

OFT B-KITS

Item No.

1009AE

Firm Fixed Price Quantity U/I Unit Price Amount

OFT B - Kits The contractor shall provide B-Kits for modification/installation consisting of the required components to support T-1A avionics suite modification for the OFT IAW SOW Sections 5.6.

Limitations of Liability: Other Than High Value Item

PTT B-KITS

Item No.

1009AF

Firm Fixed Price Quantity U/I Unit Price Amount

PTT B - Kits The contractor shall provide B-Kits for modification/installation consisting of the required components to support T-1A avionics suite modification for the PTT IAW SOW Section 5.6.

PTT B-KITS

Limitations of Liability: Other Than High Value Item

MODIFICATION/PRODUCTION KIT INSTALLATION

Item No.

Firm Fixed Price From Quantity U/I To Quantity Unit Price

Quantity Range A

1 EA 15 EA

Quantity Range B

16 EA 30 EA

Quantity Range C

31 EA 45 EA

Modification/Production Kit Installation Buy American Act/Balance of Payments Program

SUPT/CSO MODIFICATION/PRODUCTION KIT INSTALLATION

Item No.

1010AA

Firm Fixed Price From Quantity U/I To Quantity Unit Price

Quantity Range A

1 EA 15 EA

Quantity Range B

16 EA 30 EA

Quantity Range C

31 EA 45 EA

SUPT/CSO Modification/Production Kit Installation

SUPT/CSO MODIFICATION/PRODUCTION KIT INSTALLATION

The contractor shall provide all labor required to fully execute the installation and integration of both A&B kits into the SUPT and CSO aircraft delivered under CLIN 1009 IAW SOW Sections 4 and 7.

Limitations of Liability: Other Than High Value Item

Item No.

1010AB

Firm Fixed Price Quantity U/I Unit Price Amount

OFT Modification/Production Kit Installation The contractor shall provide all labor required to fully execute the installation and integration of both A&B kits into the OFT delivered under CLIN 1009 IAW SOW Sections 4 and 8.

Limitations of Liability: Other Than High Value Item

Item No.

1010AC

Firm Fixed Price Quantity U/I Unit Price Amount

PTT Modification/Production Kit Installation The contractor shall provide all labor required to fully execute the installation and integration of both A&B kits into the PTT delivered under CLIN 1009 IAW SOW Section 4 & 8.

Limitations of Liability: Other Than High Value Item

TYPE 1 TRAINING DEVELOPMENT

Item No.

Firm Fixed Price Quantity U/I Unit Price Amount

Type 1 Training Development Additional development for training as defined in CLIN 0003 as required.

Limitations of Liability: Other Than High Value Item

TYPE 1 TRAINING DEPLOYMENT

Item No.

Firm Fixed Price Quantity U/I Unit Price Amount

Type 1 Training Deployment

OPERATOR TYPE 1 TRAINING DEPLOYMENT

Item No.

1012AA

Firm Fixed Price Quantity U/I Unit Price Amount

Type 1 Training Deployment - Operators Type 1 training for T-1A operators. Deployment of training developed under CLIN 003 and 1011. Includes classroom and hands-on ground training IAW SOW Sections 10.2.4 and 11.

Buy American Act/Balance of Payments Program

MAINTENANCE TECH TYPE 1 TRAINING DEPLOYMENT

Item No.

1012AB

Firm Fixed Price Quantity U/I Unit Price Amount

Type 1 Training Deployment - Maintenance Technicians Type 1 training for T-1A maintenance technicians. Deployment of training developed under CLIN 003 and 1011. Includes classroom and hands-on ground training IAW SOW Sections 10.2.4 and 11.

Buy American Act/Balance of Payments Program

AIRCRAFT INITIAL SPARES

Item No.

Firm Fixed Price Quantity U/I Unit Price Amount

Aircraft Initial Spares Provide initial spares for SUPT and CSO aircraft IAW quantity and schedule identified in the SOW attachment XXX and no later than 30 days prior to the first aircraft deliveries IAW SOW Sections 3, and 5.4.

Buy American Act/Balance of Payments Program

SIMULATOR INITIAL SPARES

Item No.

Firm Fixed Price Quantity U/I Unit Price Amount

Simulator Initial Spares

OFT INITIAL SPARES

Item No.

1014AA

Firm Fixed Price Quantity U/I Unit Price Amount

Simulator Initial Spares - OFT The contractor shall provide initial OFT spares IAW quantity and schedule identified in the SOW attachment XXX and no later than 30 days prior to the first OFT deliveries IAW SOW Sections 3 and 5.4.

Buy American Act/Balance of Payments Program

PTT INITIAL SPARES

Item No.

1014AB

Firm Fixed Price Quantity U/I Unit Price Amount

Simulator Initial Spares - PTT The contractor shall provide initial PTT spares IAW quantity and schedule identified in the SOW attachment XXX and no later than 30 days prior to the first OFT deliveries IAW SOW Sections 3, and 5.4.

Buy American Act/Balance of Payments Program

TECHNICAL DATA DEVELOPMENT

Item No.

Firm Fixed Price Quantity U/I Unit Price Amount

Technical Data Development Buy American Act/Balance of Payments Program

SUPT/CSO TECHNICAL DATA DEVELOPMENT

Item No.

1015AA

Firm Fixed Price Quantity U/I Unit Price Amount

SUPT/CSO Technical Data Development The contractor shall develop technical data for the modified SUPT and CSO aircraft IAW delivery deadlines identified in the Integrated Master Schedule (IMS) as required by SOW Sections 3, 4, 6, 7, 8, 10 and 12.

SIMULATOR TECHNICAL DATA DEVELOPMENT

Item No.

1015AB

Firm Fixed Price Quantity U/I Unit Price Amount

OFT/PTT Technical Data Development Development of Technical Data for the modified OFT and PTT IAW delivery deadlines identified in the IMS and as required by SOW Sections 3, 4, 6, 7, 8, 10 and 12.

Buy American Act/Balance of Payments Program

CDRLS/DATA

Item No.

Firm Fixed Price Quantity U/I Unit Price Amount

EA Not Separately Priced Not Separately Priced

CDRLS

The contractor shall provide CDRL data, reports, and associated deliverables IAW SOW Appendix XXX.

Limitations of Liability: Other Than High Value Item

TRAVEL

Item No.

Firm Fixed Price Per Event Quantity U/I Unit Price Amount

EA To be Determined To be Determined

Travel This CLIN is for unanticipated Government directed travel only. Travel under this CLIN will be Firm Fixed Price per event.

TRAVEL

OVER & ABOVE

Item No.

Firm Fixed Price Quantity U/I Unit Price Amount

Limitations of Liability: Other Than High Value Item

OVER AND ABOVE WRAP RATE LABOR

Item No.

1018AA

Firm Fixed Price Quantity U/I Unit Price Amount

Over & Above Wrap Rate Labor FIRM FIXED PRICE PER EVENT AS DIRECTED BY THE ACO/PCO IAW DFARS 252.217-7028 and SOW Sections 7.1 and 12.

OVER AND ABOVE WRAP RATE LABOR

OVER AND ABOVE ENGINEERING LABOR

Item No.

1018AB

Firm Fixed Price Quantity U/I Unit Price Amount

Over & Above Engineering Labor FIRM FIXED PRICE AS DIRECTED BY THE ACO/PCO. Over and above tasks utilzing only engineering labor shall be performed under this CLIN at the negotiated over and above engineering rate indicated in Price Matrix, Attachment XXX. Over and above efforts will be performed IAW DFARS 252.217-7028 and SOW Sections 7.1 and 12.

Limitations of Liability: Other Than High Value Item

OVER AND ABOVE TECHNICIAN LABOR

Item No.

1018AC

Firm Fixed Price Quantity U/I Unit Price Amount

Over & Above Technician Labor FIRM FIXED PRICE AS DIRECTED BY THE ACO/PCO. Over and above tasks utilzing only technician labor shall be performed under this CLIN at the negotiated over and above technician rate indicated in Price Matrix, Attachment XXX. Over and above efforts will be performed IAW DFARS 252.217-7028 and SOW Sections 7.1 and 12.

OVER AND ABOVE TECHNICIAN LABOR

OVER AND ABOVE MATERIAL

Item No.

1018AD

Firm Fixed Price Quantity U/I Unit Price Amount

Limitations of Liability: Other Than High Value Item

ENGINEERING CHANGE PACKAGES

Item No.

Firm Fixed Price

EA To be Determined To be Determined

ENGINEERING CHANGE PACKAGES

Engineering Change Packages IAW SOW 3.8, When contractor realizes a need for an Engineering Change, they shall prepare and submit to PM, an abbreviated Class 1 Engineering Change Proposal to document needed changes from the baseline approved at the Critical Design Review.

This CLIN is for those related costs.

Buy American Act/Balance of Payments Program

Option 2 CLINS

Production and Installation

Option Year 2 for Production and Installation will be exercised upon completion of the FAA certification and successful OT&E. Option CLINs 2009-2019 will be exercised in conjunction with the Option Year and will stipulate what quantities of kits and modified aircraft will be delivered.

AIRCRAFT KIT PRODUCTION (A & B)

Item No.

Firm Fixed Price Quantity U/I Unit Price Amount

Aircraft Kit Production (A & B)

Limitations of Liability: Other Than High Value Item

SUPT/CSO A-KITS

Item No.

2009AA

Firm Fixed Price Quantity U/I Unit Price Amount

SUPT/CSO A - Kits

SUPT/CSO A-KITS

The contractor shall provide A-Kits for modification/installation consisting of the required components to support T-1A avionics suite modification for the SUPT and CSO aircraft IAW SOW Sections 4, 5.6 and 7.4.

Buy American Act/Balance of Payments Program

OFT A-KITS

Item No.

2009AB

Firm Fixed Price Quantity U/I Unit Price Amount

Buy American Act/Balance of Payments Program

PTT A-KITS

Item No.

2009AC

Firm Fixed Price Quantity U/I Unit Price Amount

Buy American Act/Balance of Payments Program

SUPT/CSO B-KITS

Item No.

2009AD

Firm Fixed Price Quantity U/I Unit Price Amount

SUPT/CSO B - Kits The contractor shall provide B-Kits for modification/installation consisting of the required components to support T-1A avionics suite modification for the SUPT and CSO aircraft IAW SOW Sections 4 and 5.6.

Limitations of Liability: Other Than High Value Item

SUPT/CSO B-KITS

OFT B-KITS

Item No.

2009AE

Firm Fixed Price Quantity U/I Unit Price Amount

OFT B - Kits The contractor shall provide B-Kits for modification/installation consisting of the required components to support T-1A avionics suite modification for the OFT IAW SOW Sections 4 and 5.6.

Limitations of Liability: Other Than High Value Item

PTT B-KITS

Item No.

2009AF

Firm Fixed Price Quantity U/I Unit Price Amount

PTT B - Kits The contractor shall provide B-Kits for modification/installation consisting of the required components to support T-1A avionics suite modification for the PTT IAW SOW Sections 4 and 5.6.

Limitations of Liability: Other Than High Value Item

MODIFICATION/PRODUCTION KIT INSTALLATION

Item No.

Firm Fixed Price From Quantity U/I To Quantity Unit Price

Quantity Range A

1 EA 15 EA

Quantity Range B

16 EA 30 EA

Quantity Range C

31 EA 45 EA

Modification/Production Kit Installation Buy American Act/Balance of Payments Program

SUPT/CSO MODIFICATION/PRODUCTION KIT INSTALLATION

Item No.

2010AA

Firm Fixed Price From Quantity U/I To Quantity Unit Price

Quantity Range A

1 EA 15 EA

Quantity Range B

16 EA 30 EA

Quantity Range C

31 EA 45 EA

SUPT/CSO Modification/Production Kit Installation The contractor shall provide all labor required to fully execute the installation and integration of both A&B kits into the SUPT and CSO aircraft delivered under CLIN 1009 IAW SOW Sections 4 and 7.

Limitations of Liability: Other Than High Value Item

Item No.

2010AB

Firm Fixed Price Quantity U/I Unit Price Amount

Limitations of Liability: Other Than High Value Item

Item No.

2010AC

Firm Fixed Price Quantity U/I Unit Price Amount

Limitations of Liability: Other Than High Value Item

TYPE 1 TRAINING DEVELOPMENT

Item No.

TYPE 1 TRAINING DEVELOPMENT

Quantity U/I Unit Price Amount

Type 1 Training Development Additional development for training as defined in CLIN 0003 as required.

Buy American Act/Balance of Payments Program

TYPE 1 TRAINING DEPLOYMENT

Item No.

Firm Fixed Price Quantity U/I Unit Price Amount

Type 1 Training Deployment Buy American Act/Balance of Payments Program

OPERATOR TYPE 1 TRAINING DEPLOYMENT

Item No.

2012AA

Firm Fixed Price Quantity U/I Unit Price Amount

Limitations of Liability: Other Than High Value Item

MAINTENANCE TECH TYPE 1 TRAINING DEPLOYMENT

Item No.

2012AB

Firm Fixed Price Quantity U/I Unit Price Amount

Type 1 Training Deployment - Maintenance Technicians

MAINTENANCE TECH TYPE 1 TRAINING DEPLOYMENT

Type 1 training for T-1A maintenance technicians. Deployment of training developed under CLIN 003 and 1011. Includes classroom and hands-on ground training IAW SOW Sections 10.2.4 and 11.

Buy American Act/Balance of Payments Program

AIRCRAFT INITIAL SPARES

Item No.

Firm Fixed Price Quantity U/I Unit Price Amount

Buy American Act/Balance of Payments Program

SIMULATOR INITIAL SPARES

Item No.

Firm Fixed Price Quantity U/I Unit Price Amount

Simulator Initial Spares Buy American Act/Balance of Payments Program

OFT INITIAL SPARES

Item No.

2014AA

Firm Fixed Price Quantity U/I Unit Price Amount

Buy American Act/Balance of Payments Program

PTT INITIAL SPARES

Item No.

2014AB

Firm Fixed Price Quantity U/I Unit Price Amount

Simulator Initial Spares - PTT

PTT INITIAL SPARES

The contractor shall provide initial PTT spares IAW quantity and schedule identified in the SOW attachment XXX and no later than 30 days prior to the first OFT deliveries IAW SOW Sections…

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated Nov 14, 2017.