Answers_to_Site_Visit_Questions.docx
DOCX document 652 KB Posted
- Attached to
- Iditarod DFAC Asphalt Pad
- Solicitation number
- FA500018Q0097
View the file
Other files
| File | Type | Posted |
|---|---|---|
| KaTom_Specs.pdf | ||
| SOW.pdf | ||
| FA500018Q0097.pdf | ||
| Wage_Rates.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
1.Q: Will the bollards need to be removed between the existing freezer and the new freezer?
A: Not Listed in the SOW-(Bollards will NOT be removed).
| 2.Q: | Will new bollards need to be installed for the new walk-in freezer? |
| A: | Not listed in the SOW-(No bollards will need to be installed). |
3.Q: Is the compressor motor 1-1/2HP 208/230V single phase or three phase?
A: See SOW #3 (1-1/2 HP,208-230v/60/1) and Manufactures specifications page #1.
4.Q: Can the walk-in freezer manufacturer installation and specifications be provided for this RFP?
A: Manufacture specifications will be provided.
5.Q: Can the ramp for entry to the new walk-in freezer be concrete or steel?
A: SOW # 4 - The customers intent is to have a steel grated ramp for entry into the freezer. This will provide for a slip free surface during winter months.
6.Q: To meet the Technical Factor the contractors proposal will need to meet and provide for the Contract RFP SOW? Please clarify.
A: Comply with all areas of the Statement of Work
7.Q: Will the Freezer need to be placed on a mount/bracket so as not to sit on the concrete pad?
A: Yes, this would prevent damage to the floor over the life of the freezer (See below photo).
image1.jpeg
File details come from the government source that posted it.