Question_and_Answer_2.docx

DOCX document 14 KB Posted

Attached to
Command and Control Trailer
Solicitation number
FA4830-16-Q-0048
Issued by

About this file

Response to questions 2

View the file

Other files

File Type Posted
Question_and_Answer.docx DOCX document
Command_and_Control_Trailer_Requirement.pdf PDF
C C_Drawing.pdf PDF

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

Question and Answer

1. Q- Telescoping lens front interior clarification.

A-The space needed for the telescoping mast to recess into on the customer’s original rough sketch was on the front left of the interior above the mini fridge. The two camera/screen monitors can be moved to allow for however much room is needed for the mast.

2. Q- Length of road-side slide out?

A- The slide out would preferably let the entire bench be slide out of the aisle which is ≈30” deep

3. Q- Is the interior or exterior height 8’?

A- 8’ is the rough exterior height

4. Is there a specific type of flooring needed?

A- Any type of non-slip flooring would be best, as most military boots do not grip perfectly smooth surfaces well when wet.

5. Exterior thickness and color?

A- Thickness is manufacturer’s recommendation for durability, white is preferred

6. (2) Exterior fold-down table tops explained A- The fold down tables are not required to be removable, they are meant to act as a table surface near the power outlets, ≈4’x2’ unless there is an industry standard for such fold downs

7. Telescoping mast requirement A- The mast is an or equal, pneumatic or electric is acceptable

File details come from the government source that posted it. Updated .