Command_and_Control_Trailer_Requirement.pdf

Command and Control Trailer

The Exterior of the trailer shall be ≤ 30ft Length, ≤8.5ft Width, ≈8ft Height.

The Trailer Frame shall have ≥16” Clearance for off-road capabilities.

The trailer shall be towed by ball hitch.

There must have a telescoping mast/ camera; roof mounted WilBurt Systems Night Scan Chief (1) 25’ WilBurt Pneumatic Telescoping mast or Equal

Curbside Exterior

The door (36”) shall have a heavy duty L-style locking handle.

(2) Fold Down Table tops, 3 Water proof power outlets behind each

(2) quick release aluminum Monitor mounts above fold down tables

Waterproof exterior loud speakers, hooked to PA system inside trailer

Storage Bins built in between door and wheel-well if space is available

“Moody AFB Emergency Management” logo on side

Street Side Exterior

(1) Waterproof power outlet

Electric Pop-out section

“Moody AFB Emergency Management” logo on side

Rear Exterior

LED brake lights/ signals

Electric fold down door

Footings to prevent door from being scratched

Logo and lettering

Front Exterior

Fuel fill point for generator

Generator built into trailer or mounted to frame as space allows, If mounted to Frame generator must be in a protective housing

Generator ≥ Honda EB11000 (manufacturer’s recommendation preferred)

Interior

Curbside Lockers/Bench 3’ Depth

Street Side bench 30” Depth

Walkway 30” Wide

White LED lighting

Curb Side Interior

11ft Stainless steel work bench 18” tall cabinets overhead LED lighting under cabinets Power strip along wall

4ft Slide out shelfing unit

Remaining space to the rear to be wall lockers, as many as space permits

Street Side Interior

Weather Monitor Station mounted to wall; Includes Temp, Humidity, Wind Speed/ Direction, Barometric Pressure, Dew point

Command Station, Power switches, Generator start, PA Microphone

Bench Seating; 12ft L x 30in H x 30in D; 4 cabinets built in under seating

(4) Scott Knockdown Walkaway Bracket + collision support strap or equal

Overhead Cabinets above seating

(2) Rows of Hook Tie Rings; Depressed Flush

Switch for Electric Lift Gate

*bench seating to be pop out section of trailer

Front Interior

Mini Fridge

3 Shelf Shelving unit to the right of work station

Work area with seating for (1) Person

Camera Display/Controls

Screen display for portable Laptop *both displays to be mirrored to exterior monitors

*telescoping lens to be built into the front left of this space as needed

All interior walls to be writable by dry erase markers

All cabinets to be divided with separators not one continuous unit

Trailer shall have external Shore power plug to run trailer without generator use

A/C unit(s) to maintain comfortable temperature in trailer (manufacturer’s recommendation)