SOW_-_Spectrum_Management.pdf

Statement of Work

Spectrum Management/Monitoring Equipment For

49th Communications Squadron

In Support of

RF Transmission Workcenter

1.0 PURPOSE

The 49th CS/SCOT workcenter is in need of equipment to support the installation spectrum manager in conducting his assigned duties, and to assist the radio frequency transmission workcenter in troubleshooting, and isolating spectrum interference reports from units on Holloman AFB.

2.0 SCOPE

Three sets of equipment are requested to complete this function. Fixed spectrum monitoring equipment must interface with ANRITSU VISION MONITOR software, to provide the capability to combine our equipment signals with the existing equipment utilized by the 49

AMXS squadron. They currently use the following:

- Anritsu model numbers MS2713A, MS27103A-0706, MS27103A-0424, MS27103A-

0412, MS27103A-0400, MS27103A-0401, MS27103A-0110

Having the capability to interface with the listed equipment will expand the range of use in regards to spectrum monitoring and provide the ability to triangulate signals in and around

Holloman AFB.

Additionally, we require the capability to conduct mobile spectrum interference locating. This system should include a mobile spectrum monitor that can cover the frequency spectrum form 9 kHZ – 9 GHz. The system should be handheld with omnidirectional antennas and directional finding antennas and have directional finding capabilities.

3.0 Technical Requirements Specification Listing

3.1 Mobile Spectrum monitoring/tracking/sniffing system

3.1.1. Frequency Ranges: 9 kHz to 9 GHz,

3.1.2. Measurements: Occupied Bandwidth, Channel Power, ACPR, C/I, Emission Mask, Spurious Emissions, Field Strength

3.1.3. 3G and 4G Measurement options for LTE (FDD & TDD), CDMA, W-CDMA, WiMAX, GSM, and

TD-SCDMA

3.1.4. Interference Analyzer: Spectrogram, Signal Strength, RSSI, Mapping

3.1.5. Dynamic Range: > 106 dB in 1 Hz RBW @ 2.4 GHz

3.1.6. DANL: –164 dBm in 1 Hz RBW @ 1 GHz preamp On

3.1.7. Phase Noise: –112 dBc/Hz @ 10 kHz offset at 1 GHz

3.1.8. 1 Hz to 10 MHz Resolution Bandwidth (RBW)

3.1.9. Tracking Generator up to 20 GHz

3.1.10. PIM Alert (a downloadable easyTest™ script)

3.1.11. Standard three-year warranty (battery one-year warranty)

3.1.12. Frequency Accuracy: Aging: + or – 1.o ppm/10years / Accuracy + or - .3 ppm (24 degrees Celsius + or = 25 degrees Celsius) + aging

3.1.13. Transmitter Spectrum Analysis–occupied bandwidth, channel power, adjacent channel power ratio, and modulation Received Signal Analysis–location and identification of in-band interference and out-of-band spurious signals, and spectral masks Signal Strength

Mapping–to determine the most suitable location for antennas, base stations, and repeaters Field analysis of 3G and 4G Signals–fast sweep speed, field-swappable high capacity battery, smart measurements, and daylight-viewable display make the MS2720T an ideal choice for the challenges of rugged environments. Broadcast measurement–AM

& FM analog proofing measurements Interference Mitigation in many diverse situations including wireless patient telemetry in hospitals Burst Detect captures 200 μs bursts the first time, every time.

3.2. Fixed Position Spectrum Monitoring Equipment (up to 24 antenna inputs)

3.2.1. 9 kHz to 6 GHz

3.2.2. 24 RF IN ports for use with multiple antennas

3.2.3. Sweep speed up to 24 GHz/s

3.2.4. Integrated web server to view, control and conduct measurements via web browser

3.2.5. Watchdog timer to insure long-term stability for remotely deployed monitors

3.2.6. Low spur levels for accurate signal discovery

3.2.7. 20 MHz instantaneous FFT bandwidth

3.2.8. Compatibility with Anritsu Vision Monitor software

3.2.9. Cellular operators monitoring their spectrum at BTS. White space monitoring (need for multiple antennas to cover wide frequency range). Miscellaneous applications requiring multiple directional antennas

3.3. Fixed Position Spectrum Monitoring Equipment (Single Antenna)

3.3.1. 9 kHz to 6 GHz

3.3.2. 24 RF IN ports for use with multiple antennas

3.3.3. Sweep speed up to 24 GHz/s

3.3.4. Integrated web server to view, control and conduct measurements via web browser

3.3.5. Watchdog timer to insure long-term stability for remotely deployed monitors

3.3.6. Low spur levels for accurate signal discovery

3.3.7. 20 MHz instantaneous FFT bandwidth

3.3.8. Compatibility with Anritsu Vision Monitor software

3.3.9. Ideally suited for Government regulators enforcing spectrum policies. White space monitoring. Sensitive site monitoring (national borders, military facilities, nuclear power plants). Airport monitoring (with communication frequencies often adjacent to FM bands). Monitor jails/prisons for illegal broadcasts. Positive Train Control (PTC), insure communication channels open for trains. Cable TV, to mitigate leakage to outside environment and leakage into cable system

3.3.10. Further technical specifications can be found in the following attachments

4.0 GENERAL CONSIDERATIONS

4.1 PERIOD OF PERFORMANCE

This is a short term project the period of performance shall be approximately 10 days from

Authority to Proceed (ATP).

4.2 GOVERNMENT FURNISHED EQUIPMENT (GFE)

The Government will not provide any equipment in support of contractor efforts.

4.3 PLACE OF PERFORMANCE

The installation of the presence-sensing device shall be performed in Building 1178, Holloman

AFB, NM 88330.

4.4 CONTRACTOR IDENTIFICATION

The work will be performed at Holloman AFB, NM . Contractor personnel must identify themselves as contractors during meetings, telephone conversations, in electronic messages or correspondence related to this contract.

4.5 CONTRACTOR FURNISHED ITEMS AND SERVICES

The contractor shall furnish all personnel, tools, materials, supervision, and other items and non-personal services, necessary to perform the work defined in this SOW.

5.0 CONTRACT ADMINISTRATION:

5.1 HOURS OF OPERATION

The Government’s regular hours of operation are alternating work weeks between the hours of

6:30 AM to 4:00 PM Monday through Thursday and 6:30 AM to 4:00 PM Monday through

Thursday/Friday 6:30 AM to 3:00 PM, except Federal holidays or when the Government facility is closed due to local or national emergencies, administrative closings, or similar Government-directed facility closings.

Technical Data Sheet

Remote Spectrum Monitors For Remote RF Signal Monitoring

MS27103A

9 kHz to 6 GHz

MS27103A Specifications

2 of 8 PN: 11410-00854 Rev. C MS27103A TDS

Introduction The MS27103A provides 12 RF Input ports as a standard configuration (24 RF Input ports are available with Option 424).

This model is typically used with three or six sector BTS architectures, with multiple carriers per sector. A high speed switch is placed in the monitor to provide measurement capability for each RF input. A greater than 30 dB isolation is provided between each RF Input port to assure the integrity of the measurement.

Remote Spectrum Monitor Highlights

• Sweep rates up to 24 GHz/s

• Integrated web server to view, control, and conduct measurements via a web browser (Chrome or Firefox)

• Remote firmware updates

• Watchdog timer to insure long-term stability for remotely deployed monitors

• Low spurious signals for accurate signal discovery

• 20 MHz IF bandwidth

• Low power consumption < 11 watts

• Integrated GPS receiver for monitoring location and time synchronization applications

• Gigabit Ethernet available for high speed communications

• Measurements: occupied bandwidth and channel power

• Interference analysis: spectrogram and signal strength

• Dynamic range: > 106 dB normalized to 1 Hz BW

• Phase noise: –99 dBc/Hz @ 10 kHz offset at 1 GHz

• Frequency accuracy: < ±1.5 ppm, < ±50 ppb with GPS High Accuracy Mode

• IQ block mode and streaming with time stamping for time difference of arrival (TDOA) applications

• Remote control via SCPI commands

• Vision™ software optional for automated spectrum measurements, setting alarms, and geo-locating signal sources

MS27103A Remote Spectrum Monitor (front and rear sides shown, Option 110 replaces screw terminal with 3-pin AC line receptacle)

Specifications MS27103A

MS27103A TDS PN: 11410-00854 Rev. C 3 of 8

Table of Contents

Definitions Remote Spectrum Monitor General Specifications Ordering Information

Definitions All specifications and characteristics apply under the following conditions, unless otherwise stated:

Warm-Up Time After 10 minutes of warm-up time, where the instrument is left in the On state.

Temperature Range Over the 23 °C ±5 °C temperature range.

Typical Performance Typical specifications in parenthesis () describe performance that will be met by a minimum of 80% of all products. They do not include guard bands and are not warranted.

Typical specifications that are not in parenthesis are not tested and not warranted. They are generally representative of the nominal characteristic performance.

Uncertainty A coverage factor of k = 2 is applied to the measurement uncertainties to facilitate comparison with other industry monitors.

All specifications subject to change without notice. For the most current data sheet, please visit the Anritsu web site: www.anritsu.com http://www.anritsu.com

4 of 8 PN: 11410-00854 Rev. C MS27103A TDS

Remote Spectrum Monitor

Frequency Frequency Range 9 kHz to 6 GHz (tunable to 0 Hz)

Tuning Resolution 1 Hz Frequency Reference Accuracy: ±1.5 ppm (25 °C ± 25 °C) ±1.0 ppm/year aging

< ±50 ppb with GPS on Frequency Span 10 Hz to 6 GHz

Sweep Speed Typical (full span FTT mode) 10 kHz RBW 5 GHz/s 30 kHz RBW 12 GHz/s 3 MHz RBW 24 GHz/s

Bandwidth Resolution Bandwidth (RBW) 10 Hz to 3 MHz in 1–3 sequence (–3 dB bandwidth)

Video Bandwidth (VBW) 10 Hz to 3 MHz in 1–3 sequence (–3 dB bandwidth) (auto or manually selectable)

Spectral Purity SSB Phase Noise @ 1 GHz (–99 dBc/Hz) @ 10 kHz offset

(–98 dBc/Hz) @ 100 kHz offset

Amplitude Ranges Dynamic Range > 106 dB (2.4 GHz), 2/3 (TOI-DANL) in 1 Hz RBW

Measurement Range DANL to +22 dBm (≥ 100 MHz) DANL to +10 dBm (< 100 MHz)

Reference Level Range –150 dBm to +30 dBm Attenuator Range 0 dB to 50 dB in 5 dB steps

Maximum Continuous Input (100 MHz to 6 GHz) +22 dBm, ≥ 10 dB attenuation, ±50 VDC +10 dBm, < 10 dB attenuation, ±50 VDC –10 dBm, preamp on, ±50 VDC

Amplitude Units Log Scale Modes: dBm

Amplitude Accuracy Attenuation ≤ 40 dB, preamp off for frequencies less than 100 kHz

Displayed Average Noise Level (DANL) RBW normalized to 1 Hz, 0 dB attenuation (Port 1 is specified. All other ports are typical and within 1 dB of the specified values)

Spurs Typical Residual Spurious RF input terminated, 0 dB input attenuation, preamp off

(< –80 dBm), 10 MHz to 4.5 GHz (< –70 dBm), >4.5 GHz to 6.0 GHz RF input terminated, 0 dB input attenuation, preamp on (< –95 dBm)*, 10 MHz to 5.0 GHz *(< –88 dBm), 16 MHz to 18 MHz (< –85 dBm), >5.0 GHz to 6.0 GHz

Input-Related Spurious < –60 dBc, 0 dB attenuation, –30 dBm input, carrier offset > 5 MHz

Second Harmonic Distortion Typical; 0 dB attenuation, –30 dBm input 50 MHz (–50 dBc)

> 50 MHz to 200 MHz < –60 dBc > 200 MHz to 3000 MHz < –60 dBc

Third-Order Intercept (TOI) Typical; preamp off, –20 dBm tones 100 kHz apart, 0 dB attenuation, reference level –20 dBm 800 MHz (+7 dBm)

2400 MHz (+17 dBm) 200 to 2200 MHz +10 dBm

>2.2 GHz to 5.0 GHz +8 dBm >5.0 GHz to 6.0 GHz +14 dBm

Option 424 (24 Ports) Port 1 (dB) Ports 2 to 12 (dB, typical) Ports 13 to 24 (dB, typical)

9 kHz to 5 GHz > 5 GHz to 6 GHz

±2.5 ±3.0

±3.0 ±3.5

±3.0 ±3.5

Preamp Off, Reference Level –20 dBm Preamp On, Reference Level –50 dBm Port 1 (dBm) Typical (dBm) Port 1 (dBm) Typical (dBm)

10 MHz to 3.3 GHz > 3.3 GHz to 4.1 GHz

> 4.1 GHz to 5 GHz > 5 GHz to 6 GHz

–140 –133 –130 –115

–145 –138 –135 –123

–157 –152 –148 –133

–160 –155 –152 –141

MS27103A TDS PN: 11410-00854 Rev. C 5 of 8

Remote Spectrum Monitor (continued)

VSWR < 2.5:1 typical

Signal Processing Data Types I/Q time series: 8, 10, 16 or 24 bit resolution

Spectrum trace: 100 to 4000 points Data Transfer Modes I/Q time series or spectrum trace in streaming or block mode

I/Q Data Streaming Rate Gapless on 100Base-T network, Up to 2.6 MHz signal bandwidth I/Q Data Time Stamp Resolution 8.7 ns

Antenna Port Isolation Typical ≤ 3 GHz > 40 dB > 3 GHz > 30 dB

I/Q Recording Time Typical

Output Data Rate I/Q Bit Resolution Signal Bandwidth MSPS 24 bits 16 bits 10 bits 8 bits

20 MHz 76.25 / 3 1.3 s 2.5 s 3.8 s 5 s

13.3 MHz 76.25 / 4 1.7 s 3.4 s 5 s 6.7 s

6.67 MHz 76.25 / 8 3.4 s 6.7 s 10.1 s 13.4 s

2.67 MHz 76.25 / 20 8.4 s 16.8 s 25.2 s 33.6 s

1.33 MHz 76.25 / 40 16.8 s 33.6 s 50.4 s 1.12 min

667 kHz 76.25 / 80 33.6 s 1.12 min 1.68 min 2.24 min 267 kHz 76.25 / 200 1.4 min 2.8 min 4.2 min 5.6 min 133 kHz 76.25 / 400 2.8 min 5.6 min 8.39 min 11.19 min

66.7 kHz 76.25 / 800 5.6 min 11.19 min 16.79 min 22.38 min

26.7 kHz 76.25 / 2000 13.99 min 27.98 min 41.97 min 55.96 min

13.3 kHz 76.25 / 4000 27.98 min 55.96 min 1.4 h 1.87 h

6.67 kHz 76.25 / 8000 55.96 min 1.87 h 2.8 h 3.73 h

2.67 kHz 76.25 / 20000 2.33 h 4.66 h 6.99 h 9.33 h

1.33 kHz 76.25 / 40000 4.66 h 9.33 h 13.99 h 18.65 h

6 of 8 PN: 11410-00854 Rev. C MS27103A TDS

General Specifications

Setup Parameters System Status Temperature, Serial Number, Firmware Version, Options Installed, Self Test, Application Self Test, GPS

System Options Name, Date and Time, Reset (Factory Defaults, Master Reset, Update Firmware) Directory Management Sort Method (Name/Type/Date), Ascend/Descend, Internal/USB, Copy

Internal Trace/Setup Memory 4 GB internal memory available for storing files Mode Switching Automatically stores/recalls most recently used setup parameters in the mode

Connectors RF In 12 SMA(f) ports, 50 Ω

24 SMA(f) ports, 50 Ω (optional) RF In Damage Level +22 dBm peak, ±50 VDC maximum continuous input (≥ 10 dB attenuation) External Power 11 W, ±20 VDC to ±70 VDC (110/220 VAC optional)

Ethernet One RJ45 connector for Gbit LAN, 2nd port optional for daisy chaining.

USB Two USB Type A connectors

External Reference In 10 MHz, +10 dBm max, +5 VDC max, BNC(f) GPS SMA(f)

Electromagnetic Compatibility European Union CE Mark, EMC Directive 2004/108/EC

Interference EN 61326-1 Emissions EN 55011 Immunity EN 61000-4-2/-4-3/-4-4/-4-5/-4-6/-4-11

Low Voltage Directive 2006/95/EC Australia and New Zealand RCM

Korea KCC

Safety Safety Class EN 61010-1 Class 1

Warranty Instrument Standard three-year warranty

Environmental Operating Temperature 0 ºC to +55 ºC

Maximum Humidity 95 % RH (non-condensing) at 30 ºC Shock MIL-PRF-28800F Class 2

Storage –51 ºC to +71 ºC Altitude 4600 meters, operating and non-operating

ESD

RF Input Pin Withstands up to ±4 kV

Size and Weight Size 480 mm x 90 mm x 300 mm (18.9 in x 3.5 in x 11.8 in)

Weight 12-port: 3.9 kg (8.9 lb) 24-port: 4.5 kg (9.9 lb)

MS27103A TDS PN: 11410-00854 Rev. C 7 of 8

Ordering Information

Standard Hardware

Hardware Options

Software Options

Standard Accessories (included with instrument)

Optional Accessories

Model Number Description MS27103A Spectrum Monitor with 12 SMA(f) Input Ports

(requires one frequency option)

Option Number Description MS27103A-0706 9 kHz to 6 GHz Frequency Range, Option 706 MS27103A-0424 Expands Input Ports to 24 SMA(f) MS27103A-0110 110/220 VAC Power Supply MS27103A-0412 Two Ethernet Ports

Option Number Description MS27103A-0400 Vision Monitor Enabled MS27103A-0401 Vision Locate Enabled (requires Option 400 above)

Part Number Description 2000-1371-R Ethernet Cable, 2.13 m (7 ft) 2000-1528-R GPS Antenna, SMA(m) with 5 m (15 ft) cable, 3 dBi gain, requires 5 VDC

Part Number Description 760-287-R Large Transit Case with Wheels and Handle

MS27103A TDS, PN: 11410-00854, Rev. C Copyright July 2016, Anritsu Company, USA. All Rights Reserved.

® Anritsu All trademarks are registered trademarks of their respective companies.

Anritsu utilizes recycled paper and environmentally conscious inks and toner.

Data subject to change without notice.

For the most recent specifications, visit: www.anritsu.com.

Training at Anritsu Anritsu has designed courses to help you stay up to date with technologies important to your job. For available training courses, visit: www.anritsu.com/training

● United States Anritsu Company 1155 East Collins Blvd, Suite 100 Richardson, TX 75081, U.S.A.

Toll Free: 1-800-267-4878 Phone: +1-972-644-1777 Fax: +1-972-671-1877

● Canada Anritsu Electronics Ltd.

700 Silver Seven Road, Suite 120 Kanata, Ontario K2V 1C3, Canada Phone: +1-613-591-2003 Fax: +1-613-591-1006

● Brazil Anritsu Electrônica Ltda.

Praça Amadeu Amaral, 27 - 1 Andar 01327-010 Bela Vista, São Paulo, SP, Brazil Phone: +55-11-3283-2511 Fax: +55-11-3288-6940

● Mexico Anritsu Company, S.A. de C.V.

Av. Ejército Nacional No. 579 Piso 9, Col. Granada 11520 México, D.F., México Phone: +52-55-1101-2370 Fax: +52-55-5254-3147

● United Kingdom Anritsu EMEA Ltd.

200 Capability Green Luton, Bedfordshire LU1 3LU United Kingdom Phone: +44-1582-433280 Fax: +44-1582-731303

● France Anritsu S.A.

12 Avenue du Québec Bâtiment Iris 1-Silic 612 91140 Villebon-sur-Yvette, France Phone: +33-1-60-92-15-50 Fax: +33-1-64-46-10-65

● Germany Anritsu GmbH Nemetschek Haus, Konrad-Zuse-Platz 1 81829 München, Germany Phone: +49-89-442308-0 Fax: +49-89-442308-55

● Italy Anritsu S.r.l.

Via Elio Vittorini 129 00144 Roma, Italy Phone: +39-06-509-9711 Fax: +39-06-502-2425

● Sweden Anritsu AB Kistagången 20B 164 40 KISTA, Sweden Phone: +46-8-534-707-00 Fax: +46-8-534-707-30

● Finland Anritsu AB Teknobulevardi 3-5 FI-01530 Vantaa, Finland Phone: +358-20-741-8100 Fax: +358-20-741-8111

● Denmark Anritsu A/S Kay Fiskers Plads 9 2300 Copenhagen S, Denmark Phone: +45-7211-2200 Fax: +45-7211-2210

● Russia Anritsu EMEA Ltd.

Representation Office in Russia Tverskaya str. 16/2, bld. 1, 7th floor Moscow, 125009, Russia Phone: +7-495-363-1694 Fax: +7-495-935-8962

● Spain Anritsu EMEA Ltd.

Representation Office in Spain Edificio Cuzco IV, Po. de la Castellana, 141, Pta. 8 28046, Madrid, Spain Phone: +34-915-726-761 Fax: +34-915-726-621

● United Arab Emirates Anritsu EMEA Ltd.

Dubai Liaison Office 902, Aurora Tower, P O Box: 500311- Dubai Internet City Dubai, United Arab Emirates Phone: +971-4-3758479 Fax: +971-4-4249036

● India Anritsu India Private Limited 2nd & 3rd Floor, #837/1, Binnamangla 1st Stage Indiranagar, 100ft Road, Bangalore - 560038, India Phone: +91-80-4058-1300 Fax: +91-80-4058-1301

● Singapore Anritsu Pte. Ltd.

11 Chang Charn Road, #04-01, Shriro House Singapore 159640 Phone: +65-6282-2400 Fax: +65-6282-2533

● P.R. China (Shanghai) Anritsu (China) Co., Ltd.

27th Floor, Tower A New Caohejing International Business Center No. 391 Gui Ping Road Shanghai, Xu Hui Di District Shanghai 200233, P.R. China Phone: +86-21-6237-0898 Fax: +86-21-6237-0899

● P.R. China (Hong Kong) Anritsu Company Ltd.

Unit 1006-7, 10/F., Greenfield Tower Concordia Plaza No. 1 Science Museum Road, Tsim Sha Tsui East Kowloon, Hong Kong, P. R. China Phone: +852-2301-4980 Fax: +852-2301-3545

● Japan Anritsu Corporation 8-5, Tamura-cho, Atsugi-shi Kanagawa, 243-0016 Japan Phone: +81-46-296-1221 Fax: +81-46-296-1238

● Korea Anritsu Corporation, Ltd.

5FL, 235 Pangyoyeok-ro, Bundang-gu, Seongnam-si Gyeonggi-do, 13494 Korea Phone: +82-31-696-7750 Fax: +82-31-696-7751

● Australia Anritsu Pty. Ltd.

Unit 20, 21-35 Ricketts Road, Mount Waverley, Victoria 3149, Australia Phone: +61-3-9558-8177 Fax: +61-3-9558-8255

● Taiwan Anritsu Company Inc.

7F, No. 316, Sec. 1, Neihu Rd, Taipei 114, Taiwan Phone: +886-2-8751-1816 Fax: +886-2-8751-1817

List Revision Date: 20160317 http://www.anritsu.com/training

Technical Data Sheet

Spectrum Master™ High Performance Handheld Spectrum Analyzer

MS2720T

9 kHz to 9 GHz, 13 GHz, 20 GHz, 32 GHz, 43 GHz

MS2720T Specifications

2 of 29 PN: 11410-00646 Rev. P MS2720T TDS

Introduction From Anritsu, the inventor of the handheld spectrum analyzer first introduced in 1999, we are proud to introduce our 7th generation Spectrum Master MS2720T. The MS2720T represents the highest performance handheld spectrum analyzers available in the world as Anritsu pushes the envelope closer to benchtop quality. This generation introduces a touch screen, full-band tracking generators to 20 GHz, and best-in-class performance for dynamic range, DANL, phase noise, and sweep speed.

Spectrum and Interference Analyzer Highlights

Capabilities and Functional Highlights

• Measure: Occupied Bandwidth, Channel Power, ACPR, C/I, Field Strength, Spectral Emissions

• Measure Interference: Spectrogram, Signal Strength, RSSI

• Dynamic Range: > 106 dB in 1 Hz RBW

• DANL: –164 dBm in 1 Hz RBW

• Phase Noise: –112 dBc/Hz @ 10 kHz offset at 1 GHz

• Resolution Bandwidth (RBW): 1 Hz to 10 MHz

• Full-band Tracking Generators: 9, 13, 20 GHz

• Full-band Preamplifiers standard

• Channel Scanner: scan up to 20 channels at once

• Burst Detect™ Sweep Mode: Sweep 1000x in 15 MHz span

• Coverage Mapping: plot RSSI on on-screen map

• Interference Mapping: on-screen mapping with triangulation

• Operation to +55 ºC: full performance on AC or battery

Wireless Measurements

• GSM/GPRS/EDGE

• W-CDMA/HSPA+

• TD-SCDMA/HSPA+

• PIM Alert Application

• LTE/LTE-A FDD/TDD;

MIMO (2x2, 4x4)

• CDMA/EV-DO

• WiMAX Fixed/Mobile

• EMF Test

• Zero-span IF Output

• I/Q Waveform Capture

• Gated Sweep

• AM/FM/PM Demodulator

• High Accuracy Power Meter up to 26 GHz USB Sensors

• Three Hour Battery

Specifications MS2720T

MS2720T TDS PN: 11410-00646 Rev. P 3 of 29

Table of Contents

Definitions Spectrum Analyzer High Accuracy Power Meter (Option 19) Tracking Generator (Options 809, 813, and 820) Interference Analyzer (Option 25) Channel Scanner (Option 27) Coverage Mapping (Option 431) Electromagnetic Field Test (Option 444) GPS Receiver (Option 31) Gated Sweep (Option 90) Zero Span IF Output (Option 89) I/Q Waveform Capture (Option 24) Secure Data (Option 7) AM/FM/PM Signal Analyzer (Option 509) GSM/GPRS/EDGE Measurements (Option 880) W-CDMA/HSPA+ Measurements (Option 881) TD-SCDMA/HSPA+ Measurements (Option 882) LTE/LTE-A FDD/TDD Measurements (Option 883) CDMA/EV-DO Measurements (Option 884) WiMAX Fixed/Mobile Measurements (Option 885) General Specifications easyTest Tools™ easyMap Tools™ Master Software Tools Web Remote Control Programmable Remote Control Ordering Information – Instrument Options Standard Accessories Power Sensors Manuals Troubleshooting Guides Optional Accessories

Definitions Specifications All specifications and characteristics apply to Revision 3 instruments under the following conditions, unless otherwise stated:

• After 5 minutes of warm-up time, where the instrument is left in the ON state.

• Sweep Mode set to Performance.

• When using the internal reference signal.

Typical Specifications Typical specifications are not tested and not warranted. They are generally representative of characteristic performance.

Nominal Design parameters are not tested and not warranted.

Calibration Cycle Recommended calibration cycle is 12 months.

Time Base Error Input Frequency × Frequency Reference Error

All specifications subject to change without notice. For the most current data sheet, please visit the Anritsu web site: www.anritsu.com

4 of 29 PN: 11410-00646 Rev. P MS2720T TDS

Spectrum Analyzer

Measurements Smart Measurements Field Strength (dBm/m2, dBV/m, dBmV/m, dBµV/m, V/m, Watt/m2, dBW/m2, A/m, dBA/m, or Watt/cm2)

Occupied Bandwidth (measures 99 % to 1 % power channel of a signal, or N dB from center of signal) Channel Power (measures the total power in a specified bandwidth) ACPR (adjacent channel power ratio) Emission Mask (recall limit lines as emission mask) Spurious Emissions (measures up to 32 segments with independent setups and limits) C/I (carrier-to-interference ratio) AM/FM/SSB Demodulation (AM, wide/narrow FM, upper/lower SSB), (audio only) PIM Alert Application (available for download)

Setup Parameters Frequency Center/Start/Stop, Span, Freq Step, Freq Offset, Signal Standard, Channel #, Channel Increment Amplitude Reference Level (RL), Scale, Attenuation Auto/Level, RL Offset, Units (dBm, dBV, dBmV, dBµV, Volt, Watt, dBW, A, dBA), Pre-Amp On/Off, Detection (Peak, RMS/Avg, Negative Peak, Sample, Quasi-Peak) Span Span, Span Up/Down (1-2-5), Full Span, Zero Span, Last Span

Bandwidth RBW, Auto RBW, VBW, Auto VBW, VBW/Avg Type (Linear, Log), RBW/VBW Ratio, Span/RBW Ratio Impedance 50 Ω, 75 Ω; external pad required for 75 Ω operation

Sweep Functions Sweep Single/Continuous, Sweep Time, Gated Sweep (see Option 0090)

Sweep Mode Fast (up to 100x faster than Performance), Performance, No FFT, Burst Detect (1000x Fast in 15 MHz span) Triggers Free Run, External, Video, IF Power, Force Trigger Once

Trigger Parameters Delay, Level, Slope, Hysteresis, Holdoff (availability varies with trigger)

Trace Functions Traces Up to three Traces (A, B, C), View/Blank, Write/Hold, Trace A/B/C Operations

Trace A Operations Normal, Max Hold, Min Hold, Average, # of Averages, (always the live trace) Trace B Operations A → B, B ← → C, Max Hold, Min Hold Trace C Operations A → C, B ← → C, Max Hold, Min Hold, A – B → C, B – A → C, Relative Reference (dB), Scale

Marker Functions Markers Markers 1-6 each with a Delta Marker, or Marker 1 Reference with Six Delta Markers, Marker Table (On/Off/Large), All Markers Off Marker Types Style (Fixed/Tracking), Noise Marker, Frequency Counter Marker

Marker Auto-Position Peak Search, Next Peak (Right/Left), Peak Threshold %, Set Marker to Channel, Marker Frequency to Center, Delta Marker to Span, Marker to Reference Level

Marker Table 1-6 markers frequency and amplitude, plus delta markers frequency offset and amplitude

Limit Line Functions Available Spans > 0 Hz

Limit Lines Upper/Lower, On/Off, Edit, Move, Envelope, Advanced, Limit Alarm, Default Limit Limit Line Edit Frequency, Amplitude, Add Point, Add Vertical, Delete Point, Next Point Left/Right

Limit Line Move To Current Center Frequency, By dB or Hz, To Marker 1, Offset from Marker 1 Limit Line Envelope Create Envelope, Update Amplitude, Number of Points (2-41), Offset, Shape Square/Slope

Limit Line Advanced Type (Absolute/Relative), Mirror, Save/Recall Save on Event When Limit Crossed

Frequency

Tuning Resolution 1 Hz Frequency Reference Aging: ± 1.0 x 10–6 per 10 years

Accuracy: ± 0.3 x 10–6 (25 °C ± 25 °C) plus aging (see Options 1 and 31 for improved frequency reference aging and accuracy)

Auto-Sensing External Frequency Reference 1, 1.2288, 1.544, 2.048, 2.4576, 4.8, 4.9152, 5, 9.8304, 10, 13, 19.6608 (MHz) Sweep Time 7 µs to 3600 s in zero span

Sweep Time Accuracy ± 2 % in zero span

Bandwidth Resolution Bandwidth (RBW) 1 Hz to 10 MHz in 1–3 sequence ± 10 % (–3 dB bandwidth)

Video Bandwidth (VBW) 1 Hz to 10 MHz in 1–3 sequence (–3 dB bandwidth) RBW with Quasi-Peak Detection 200 Hz, 9 kHz, 120 kHz (–6 dB bandwidth) VBW with Quasi-Peak Detection Auto VBW is On, RBW/VBW = 1

VBW/Average Type Linear/Log

Frequency Range MS2720T-0709 MS2720T-0713 MS2720T-0720 MS2720T-0732 MS2720T-0743

(usable to 0 Hz) 9 kHz to 9 GHz 9 kHz to 13 GHz 9 kHz to 20 GHz 9 kHz to 32 GHz 9 kHz to 40 GHz

MS2720T TDS PN: 11410-00646 Rev. P 5 of 29

Spectrum Analyzer (Continued)

Spectral Purity – SSB Phase Noise

Amplitude Ranges Dynamic Range >106 dB minimum at 2.4 GHz, 2/3 (TOI-DANL) in 1 Hz RBW

Measurement Range DANL to +30 dBm Display Range 1 to 15 dB/div in 1 dB steps, ten divisions displayed

Reference Level Range –150 dBm to +30 dBm Attenuator Resolution 0 to 65 dB, 5.0 dB steps Reference Level Offset 99.9 dB External Loss to 99.9 dB External Gain

Amplitude Units Log Scale Modes: dBm, dBW, dBV, dBmV, dBμV, dBA Linear Scale Modes: fV, nV, μV, mV, V, fW, pW, nW, μW, mW, W, pA, nA, μA, mA, A

Maximum Continuous Input +30 dBm Peak typical, ± 50 VDC (≥ 10 dB Attenuation) +23 dBm Peak typical, ± 50 VDC (< 10 dB Attenuation) +13 dBm Peak typical, ± 50 VDC (Preamp = ON Option 713, 720, 732, 743; no extra limit for Option 709)

Amplitude Accuracy (excluding effects of VSWR, noise, and spurs)

Displayed Average Noise Level (DANL) (RMS detection, VBW/Avg type = Log, Ref Level = –20 dBm for Preamp Off and –50 dBm for Preamp On, Auto Attenuator On, Performance Sweep Mode)

Offset from 1 GHz 9 GHz Instrument 13 GHz to 43 GHz Instruments

10 kHz 100 kHz

1 MHz 10 MHz

Maximum –108 dBc/Hz –110 dBc/Hz –118 dBc/Hz –129 dBc/Hz

Typical –112 dBc/Hz –115 dBc/Hz –123 dBc/Hz –133 dBc/Hz

Maximum –102 dBc/Hz –106 dBc/Hz –111 dBc/Hz –123 dBc/Hz

Typical –106 dBc/Hz –110 dBc/Hz –116 dBc/Hz –129 dBc/Hz

Offset from 300 MHz

1 kHz 10 kHz

62.5 kHz 100 kHz

1 MHz 10 MHz

–107 dBc/Hz –112 dBc/Hz –113 dBc/Hz –114 dBc/Hz –120 dBc/Hz –128 dBc/Hz

–111 dBc/Hz –114 dBc/Hz –115 dBc/Hz –117 dBc/Hz –122 dBc/Hz –131 dBc/Hz

20 °C to 30 °C (after 30 minute warm-up)

–10 °C to 55 °C (after 60 minute warm-up)

9 GHz Instrument 9 kHz to 100 kHza

100 kHz to 7 GHz > 7 GHz to 9 GHz

a. Values below 100 kHz are with the preamplifier turned off.

Maximum ± 2.3 dB ± 1.3 dB ± 1.8 dB

Typical ± 0.5 dB ± 0.5 dB ± 0.5 dB

Maximum ± 2.3 dB ± 2.3 dB ± 2.8 dB

Typical ± 0.5 dB ± 0.5 dB ± 0.5 dB

13/20 GHz Instruments 100 kHz to 13 GHz

> 13 GHz to 18 GHz > 18 GHz to 20 GHz

± 1.3 dB ± 2.3 dB

± 0.5 dB ± 0.5 dB ± 1.0 dB

± 2.3 dB ± 3.3 dB

± 0.5 dB ± 0.5 dB ± 1.0 dB

32/43 GHz Instruments > 100 kHz to 13 GHz > 13 GHz to 40 GHz > 40 GHz to 43 GHz

± 1.3 dB ± 2.3 dB

± 0.5 dB ± 0.5 dB ± 1.0 dB

± 2.3 dB ± 3.3 dB

± 0.5 dB ± 0.5 dB ± 1.0 dB

Preamp = Off Preamp = On

9 GHz Instrument 10 MHz to 3 GHz > 3 GHz to 8 GHz > 8 GHz to 9 GHz

Maximum –146 dBm –140 dBm

Typical –149 dBm –143 dBm –138 dBm

Maximum –160 dBm –152 dBm

Typical –163 dBm –155 dBm –155 dBm

13 to 43 GHz Instruments 10 MHz to 4 GHz > 4 GHz to 9 GHz

> 9 GHz to 13 GHz

–145 dBm –142 dBm –136 dBm

–148 dBm –145 dBm –139 dBm

–161 dBm –159 dBm –156 dBm

–164 dBm –162 dBm –159 dBm

20 GHz Instrument > 13 GHz to 20 GHz –136 dBm –142 dBm –155 dBm –161 dBm

32 to 43 GHz Instruments > 13 GHz to 20 GHz > 20 GHz to 32 GHz > 32 GHz to 40 GHz > 40 GHz to 43 GHz

–134 dBm –135 dBm –127 dBm

–141 dBm –140 dBm –130 dBm –130 dBm

–152 dBm –154 dBm –148 dBm

–158 dBm –159 dBm –151 dBm –151 dBm

6 of 29 PN: 11410-00646 Rev. P MS2720T TDS

Spectrum Analyzer (Continued)

Spurs (0 dB input attenuation)

Third-Order Intercept (TOI) (–20 dBm tones 100 kHz apart, 0 dB Attenuation Preamp OFF, Reference Level –20 dBm)

2.4 GHz +14 dBm minimum

50 MHz to 20 GHz +20 dBm typical > 20 GHz to 32 GHz +15 dBm typical > 32 GHz to 43 GHz +20 dBm typical

P1dB < 4 GHz +5 dBm nominal

4 GHz to 20 GHz +12 dBm nominal > 20 GHz to 32 GHz +7 dBm nominal > 32 GHz to 43 GHz +12 dBm nominal

Second Harmonic Distortion (0 dB input attenuation, –30 dBm input) 50 MHz –54 dBc maximum < 4 GHz –60 dBc typical > 4 GHz –75 dBc typical

VSWR (≥ 10 dB input attenuation) 9 GHz Instruments

< 4 GHz 1.5:1 typical 4 GHz to 8 GHz 1.8:1 typical

13 GHz to 43 GHz Instruments < 20 GHz 1.5:1 typical

20 GHz to 43 GHz 2.0:1 typical

Residual Spurs (RF input terminated) < 13 GHz

13 to 20 GHz > 20 to 32 GHz > 32 to 43 GHz

Preamp = Off –90 dBm, maximum –85 dBm, maximum –80 dBm, maximum –80 dBm, maximum

Preamp = On –100 dBm, maximum –100 dBm, maximum –100 dBm, maximum

–95 dBm, maximum

Input-Related Spurious (–30 dBm input) Maximuma

–60 dBc

a. Instrument centered on single signal, span < 1.7 GHz

Typical –70 dBc

MS2720T TDS PN: 11410-00646 Rev. P 7 of 29

High Accuracy Power Meter (Option 19) (Requires external USB Power Sensor)

Amplitude Maximum, Minimum, Offset, Relative On/Off, Units, Auto Scale Average # of Running Averages, Max Hold Zero/Cal Zero On/Off, Cal Factor (Center Frequency, Signal Standard)

Limits Limit On/Off, Limit Upper/Lower

Power Sensor Model MA24105A MA24106A MA24108A/18A/26A MA24208A/18A MA24330A/40A/50A

Description Inline High Power Sensor

High Accuracy RF Power Sensor

Microwave USB Power Sensor

Microwave Universal USB Power Sensor

Microwave CW USB Power Sensor

Frequency Range 350 MHz to 4 GHz 50 MHz to 6 GHz 10 MHz to 8/18/26 GHz

10 MHz to 8/18 GHz 10 MHz to 33/40/50 GHz

Connector Type N(f), 50 Ω Type N(m), 50 Ω Type N(m), 50 Ω (8/18 GHz) Type K(m), 50 Ω (26 GHz)

Type N(m), 50 Ω Type K(m), 50 Ω (33/40 GHz) Type V(m), 50 Ω (50 GHz)

Dynamic Range +3 dBm to +51.76 dBm (2 mW to 150 W)

–40 dBm to +23 dBm (0.1 µW to 200 mW)

–40 dBm to +20 dBm (0.1 µW to 100 mW)

–60 dBm to +20 dBm (1 nW to 100 mW)

–70 dBm to +20 dBm (0.1 nW to 100 mW)

Measurand True-RMS True-RMS True-RMS, Slot Power, Burst Average Power

True-RMS, Slot Power, Burst Average Power

Average Power

Measurement Uncertainty ± 0.17 dBa ± 0.16 dBb ± 0.18 dBc ± 0.17 dBd ± 0.17 dBe

Data sheet (for complete specifications)

11410-00621 11410-00424 11410-00504 11410-00841 11410-00906

Notes: a. Expanded uncertainty with K=2 for power measurements of a CW signal greater than +20 dBm with a matched load.

Measurement results referenced to the input side of the sensor.

b. Total RSS measurement uncertainty (0 ºC to 50 ºC) for power measurements of a CW signal greater than –20 dBm with zero mismatch errors.

c. Expanded uncertainty with K=2 for power measurements of a CW signal greater than –20 dBm with zero mismatch errors.

d. Power uncertainty expressed with two sigma confidence level for CW measurement after zero operation. Includes calibration factor and linearity over temperature uncertainties, but not the effects of mismatch, zero set and drift, or noise.

e. Includes linearity over temperature uncertainties, but not the effects of calibration factor, mismatch, zero set and drift, and noise.

8 of 29 PN: 11410-00646 Rev. P MS2720T TDS

Tracking Generator (Options 809, 813, and 820)

Setup Parameters Frequency Center/Start/Stop, Span, Frequency Step, Frequency Offset, Signal Standard, Channel #, Channel Increment Amplitude Reference Level (RL), Scale, Attenuation Auto/Level, RL Offset, Units, Pre-Amp, Detection

Span Span, Span Up/Down (1-2-5), Full Span, Zero Span, Last Span Bandwidth RBW, Auto RBW, VBW, Auto VBW, VBW/Average Type (Linear/Log), RBW/VBW Ratio, Span/RBW Ratio Generator On/Off, Output Power, Mode (CW/Tracking), Settings, Transmission Measurement

Tracking Generator Settings External Gain/Loss, Power Statistics (On/Off) Transmission Measurement Settings Normalize (Off/On), Scale, Reference Position and Amplitude, Transmission Statistics and Offset

Maximum Continuous Input +23 dBm, ± 50 VDC

Frequency Frequency Range MS2720T-0809 100 kHz to 9 GHz MS2720T-0813 100 kHz to 13 GHz MS2720T-0820 100 kHz to 20 GHz

Frequency Accuracy Aging: ± 1.0 x 10–6 per 10 years Accuracy: ± 0.3 x 10–6 (25 °C ± 25 °C) plus aging

Output Power 100 kHz to 20 GHz –40 dBm to 0 dBm

Step Size 0.1 dB nominal Dynamic Range

9 GHz Instrument > 110 dB typical 100 kHz to 7 GHz > 100 dB typical > 7 GHz to 9 GHz

13 GHz and 20 GHz Instruments > 100 dB typical 100 kHz to 12 GHz > 80 dB typical > 12 GHz to 20 GHz

Level Accuracy (At least 30 minute warm-up after 1 hour non-operating at 15 to 35 °C ambient, excludes load VSWR effects)

VSWR

100 kHz to 5 GHz 2:1 typical

> 5 GHz to 20 GHz 4:1 typical

Interference Analyzer (Option 25)

Measurements Spectrum Field Strength

Occupied Bandwidth Channel Power Adjacent Channel Power (ACPR) AM/FM/SSB Demodulation (Wide/Narrow FM, Upper/Lower SSB), (audio out only) Carrier-to-Interference ratio (C/I)

Spectrogram Collect data up to 3 days Signal Strength Gives visual and aural indication of signal strength

Received Signal Strength Indicator (RSSI) Collect data up to one week Interference Mapping Draw multiple bearings of signal strength from GPS location on on-screen map

Pan and Zoom on-screen maps Support for Anritsu MA2700A Handheld Interference Hunter

Impedance 50 Ω, 75 Ω; external pad required for 75 Ω operation

Frequency Range 20 °C to 30 °C (after 30 minute warm-up)

0 °C to 50 °C (after 60 minute warm-up)

100 kHz to 9 GHz > 9 GHz to 13 GHz

> 13 GHz to 18 GHz

Maximum ± 1.5 dB ± 1.6 dB ± 2.0 dB

Typical ± 0.5 dB ± 1.0 dB ± 1.0 dB

Maximum ± 2.0 dB ± 2.1 dB ± 2.5 dB

Typical ± 1.0 dB ± 1.5 dB ± 1.5 dB

MS2720T TDS PN: 11410-00646 Rev. P 9 of 29

Channel Scanner (Option 27)

General Number of Channels 1 to 20 Channels (Power Levels)

Measurements Graph/Table, Max Hold (On/5 s/Off), Frequency/Channel, Current/Maximum, Dual Color Scanner Scan Channels, Scan Frequencies, Scan Custom List, Scan Script Master™

Amplitude Reference Level, Scale Custom Scan Number of Channels, Signal Standard & Channel, Frequency, Bandwidth

Frequency Range 9 kHz to 9, 13, 20, 32, or 43 GHz Frequency Accuracy ± 10 Hz + time base error

Measurement Range –110 dBm to +30 dBm Impedance 50 Ω, 75 Ω; external pad required for 75 Ω operation

Coverage Mapping (Option 431)

Measurements Indoor Mapping RSSI, ACPR

Outdoor Mapping RSSI, ACPR

Setup Parameters Mode Spectrum Analyzer

Frequency Center, Span (ACPR only), Freq Step, Signal Standard, Channel #, Channel Increment Amplitude Reference Level (RL), Attenuation Auto/Level, RL Offset, Pre-Amp On/Off, Detection

Span RSSI Mode: Zero Span ACPR Mode: Span, Span Up/Down (1-2-5), Full Span, Last Span

BW RBW, Auto RBW, VBW, Auto VBW, RBW/VBW Ratio, Span/RBW Ratio Measurement Setup RSSI: Mapping color thresholds

ACPR: Main Ch BW, Adj Ch BW, Ch Spacing, Adjacent Ch dB Offset, Thresholds for Good and Poor main channel levels

Mapping Colors RSSI: Dark Green (Excellent), Light Green (Very Good), Yellow (Good), Orange (Fair), Dark Red (Poor) ACPR: Dark Green (Good), Yellow (between Good and Poor), Dark Red (Poor)

Point Distance or Time Setup Repeat Type: Time (100 ms to 16 s), Distance (1 m to 10,000 m) Distance Units: m, ft

Save Points Map Save KML, JPEG, Tab Delimited Recall Points Map Recall Map, Recall KML Points only, Recall KML Points with Map, Recall Default Grid

Map Types Outdoor (GPS embedded), Indoor (non-GPS embedded). Import maps using the Anritsu easyMap Tools.

Zoomable (.azm) maps are usable, but cannot be zoomed.

Electromagnetic Field Test (Option 444)

Measurements Setup Limit lines, axis dwell time, measurement time, auto-logging, measurement units, trace display

Spectrum Analyzer Field strength is measured LTE OTA, TD-LTE OTA P-SS, S-SS, and RS are measured and displayed based on each Cell ID received

W-CDMA OTA P-CPICH signals are measured and displayed for each Scrambling Code measured Units Spectrum Analyzer: dBm/m2, dBV/m, dBmV/m, dBuV/m, V/m, W/m2, dBW/m2, A/m, dBA/m, W/cm2

LTE OTA, TD-LTE OTA, W-CDMA OTA: dBm/m2, V/m, W/m2

Results Maximum, minimum, and average of all measurements conducted Display Measurement status, number of measurements taken, pass/fail indicators

Frequency Range

Modes where EMF Measurements available Spectrum Analyzer LTE (both FDD and TDD Modes, Option 883) W-CDMA (Option 881)

Supported Antenna

2000-1800-R 9 kHz to 300 MHz

2000-1792-R 30 MHz to 3 GHz

2000-1791-R 700 MHz to 6 GHz

10 of 29 PN: 11410-00646 Rev. P MS2720T TDS

GPS Receiver (Option 31)

Setup On/Off, Antenna Voltage 3.3 V/5.0 V, GPS Info Anritsu Antennas 2000-1528-R GPS antenna (requires +5 VDC)

2000-1652-R GPS antenna (requires +3.3 VDC or +5 VDC) 2000-1760-R GPS antenna (requires +2.5 VDC to +3.7 VDC)

GPS Time/Location Indicator UTC Time, Latitude, Longitude, and Altitude on display (UTC Time and Altitude on GPS Info display) UTC Time, Latitude, Longitude, and Altitude with trace storage

High Frequency Accuracy < ± 2.5 x 10–8 with GPS On, 3 minutes after satellite lock in selected mode (GPS Antenna connected) < ± 5.0 x 10–8 for 3 days after GPS lock, 0 °C to 50 °C ambient temperature (GPS Antenna disconnected)

Connector SMA, female

Gated Sweep (Option 90)

Mode Spectrum Analyzer, Sweep Trigger External TTL, IF Level

IF Trigger Level –80 dBm to +25 dBm typical Setup Gated Sweep (On/Off)

Gate Polarity (Rising, Falling) Gate Delay (0 ms to 10 ms typical) Gate Length (1 µs to 65 ms typical) Gate View Settings: Zero Span Time , Zero Span RBW, Zero Span VBW

Zero Span IF Output (Option 89)

Mode Spectrum Analyzer/Span/Zero Span Center Frequency 140 MHz nominal (varies up to ±10 kHz nominal with center frequency and IF bandwidth)

Output Level –25 dBm typical, for signals at below reference levels, with Auto Attenuation. Maximum –10 dBm typical.

Reference Level –57 dBm to +30 dBm (Preamp Off)

–87 dBm to –40 dBm (Preamp On) IF Bandwidths Up to 30 MHz (3 dB bandwidth)

Connector BNC female

I/Q Waveform Capture (Option 24)

Mode Spectrum Analyzer Capture Mode Single or Continuous

Trigger Free Run, External (Rising/Falling), Delay Maximum Capture Length 800 ms

Maximum Sample Rate 40 MHz Maximum Signal Bandwidth 32 MHz

Secure Data (Option 7)

Set at Factory Save measurement files on external USB flash drive only Internal memory is permanently disabled

MS2720T TDS PN: 11410-00646 Rev. P 11 of 29

AM/FM/PM Signal Analyzer (Option 509)

Measurements

* Requires sine wave modulation

Setup Parameters Frequency Center Freq, Span, Freq Step, Signal Standard, Channel, Channel Increment, Set (measured) Carrier Freq to

Center Amplitude Setup Scale, Power Offset, Adjust Range

Measurements RF Spectrum, Audio Spectrum (demodulated), Audio Waveform (demodulated), Summary, Coverage Mapping (Option 431 required), Audio Demod (AM/FM only)

Measurement Setup All Measurements: Demod Type (AM, FM, PM), IFBW, Auto IFBW, Squelch Units, Distortion Measurements (Sinewave or Broadcast) RF Spectrum: OBW Method, OBW %, OBW dBC Audio Spectrum: Span, Scale, Squelch Power Audio Waveform: Sweep Time, Scale, Squelch Power Summary: Average count, Squelch Power Coverage Mapping: Measurement (SINAD, Carrier Power, Multiple), Thresholds, Point Distance/Time Audio Demod: Demod Type (AM, USB, LSB, Widband FM, Narrowband FM), Volume, Squelch

Mapping Colors Dark Green (Excellent), Light Green (Very Good), Orange (Good), Yellow (Fair), Dark Red (Poor) Marker Six markers with Delta for each, Peak Search, Marker Freq to Center, Marker to Ref Lvl, Marker Table

RF and Modulation Measurements AM Modulation Rate: ± 1 Hz (< 100 Hz), ± 2 % (> 100 Hz)

Depth: ± 5 % for (Modulation rates 10 Hz to 100 kHz) FM Modulation Rate: ± 1 Hz (< 100 Hz); ± 2 % (100 Hz to 100 kHz)

Deviation Accuracy: ± 5 % (100 Hz to 100 kHz)** PM Modulation Rate: ± 1 Hz (< 100 Hz); ± 2 % (100 Hz to 100 kHz)

Deviation Accuracy: ± 5 % (deviation 0 to 93 Rad, rate 10 Hz to 5 kHz)** IF Bandwidth 1 kHz to 300 kHz in 1-3 sequence

Frequency Span RF Spectrum: 10 kHz to 10 MHz Audio Spectrum: 2 kHz, 5 kHz, 10 kHz, 20 kHz, 70 kHz, 140 kHz

RBW/VBW 30

Span/RBW 100

Sweep Time 50 µs to 50 ms (Audio Waveform) ** IFBW must be greater than 95 % occupied BW

Display Type

RF Spectrum

(AM/FM/PM)

Audio Spectrum

(AM)

Audio Spectrum

(FM/PM)

Audio Waveform

(AM)

Audio Waveform

(FM/PM)

Summary

(AM)

Summary

(FM/PM)

Graphic Display

Power (dBm) vs.

Frequency

Depth (%) vs.

Modulation Frequency

Deviation (kHz/rad) vs.

Modulation Frequency

Depth (%) vs.

Time

Deviation (kHz/rad) vs.

Time

None None

Numerical Displays

Carrier Power Carrier

Frequency Occupied BW

AM Rate RMS Depth

(Pk-Pk)/2 Depth

SINAD*

THD*

Distortion/Total Vrms*

FM/PM Rate RMS Deviation

(Pk-Pk)/2 Deviation

SINAD*

THD*

Distortion/Total Vrms*

AM Rate RMS Depth

(Pk-Pk)/2 Depth

SINAD*

THD*

Distortion/Total Vrms*

FM/PM Rate RMS Deviation

(Pk-Pk)/2 Deviation

SINAD*

THD*

Distortion/Total Vrms*

RMS Depth Peak + Depth Peak – Depth

(Pk-Pk)/2 Depth Carrier Power

Carrier Frequency Occupied

Bandwidth AM Rate

SINAD*

THD*

Distortion/Total Vrms*

RMS Deviation Peak + Deviation Peak – Deviation

(Pk-Pk)/2 Deviation Carrier Power

Carrier Frequency Occupied

Bandwidth FM/PM Rate

SINAD*

THD*

Distortion/Total Vrms*

12 of 29 PN: 11410-00646 Rev. P MS2720T TDS

GSM/GPRS/EDGE Measurements (Option 880)

Measurements

Setup Parameters GSM/EDGE Select Auto, GSM, EDGE

Frequency Center, Signal Standard, Channel #, Closest Channel, Decrement/Increment Channel Amplitude Power Offset, Auto Range, Adjust Range

Sweep Single/Continuous, Trigger Sweep Save/Recall Setup, Measurement, Screen Shots (JPEG - save only), to Internal/External Memory

Measurement Summary Screen Overall Measurements

RF Measurements Frequency Error ± 10 Hz + time base error, 99 % confidence level

Occupied Bandwidth Bandwidth within which lies 99 % of the power transmitted on a single channel Burst Power Error ± 1.5 dB, ± 1 dB typical, (–50 dBm to +20 dBm)

Demodulation Measurements GMSK Modulation Quality (RMS Phase)

Measurement Accuracy ± 1 º

Residual Error (GSMK) 1 º

8 PSK Modulation Quality (EVM) Measurement Accuracy ± 1.5 %

Residual Error (8 PSK) 2.5 %

RF Demodulation Over-the-Air (OTA) Pass/Fail Channel Spectrum

Channel Power Occupied Bandwidth Burst Power Average Burst Power Frequency Error Modulation Type

BSIC (NCC, BCC)

Multi-channel Spectrum Power vs. Time (Frame/Slot)

Channel Power Occupied Bandwidth Burst Power Average Burst Power Frequency Error Modulation Type

BSIC (NCC, BCC)

Phase Error

EVM

Origin Offset C/I Modulation Type Magnitude Error

BSIC (NCC, BCC)

There are no additional OTA Measurements RF and Demodulation Measurements can be made OTA

View Pass/Fail Limits

GSM, EDGE

Available Measurements Channel Power Occupied Bandwidth Burst Power Average Burst power Frequency Error Phase Error

EVM

Origin Offset C/I Magnitude Error

Script Master™

MS2720T TDS PN: 11410-00646 Rev. P 13 of 29

W-CDMA/HSPA+ Measurements (Option 881)

Measurements

Setup Parameters Scrambling Code, Threshold Auto, Manual

User Selectable Scrambling Code, S-CCPCH Spread, S-CCPCH Code, PICH Code, Threshold, Max Amp Power, CPICH Power, Frequency Error Average

Maximum Spreading Factor 256, 512 Frequency Center, Signal Standard, Channel #, Closest Channel, Decrement/Increment Channel Amplitude Scale/Division, Power Offset, Auto Range, Adjust Range, Units (dBm/Watts)

Marker Six Markers, Table On/Off Sweep Single/Continuous, Trigger Sweep

Save/Recall Setup, Measurement, Screen Shots (JPEG - save only), to Internal/External Memory Measurement Summary Screens Overall Measurements, RF Measurements, Modulation Measurements

RF Measurements RF Channel Power Accuracy ± 1.25 dB, ± 0.7 dB typical, (temperature range 15 °C to 35 °C)

Occupied Bandwidth Accuracy ± 100 kHz Adjacent Channel Leakage Ratio (ACLR) –54 dB/-59 dB ± 0.8 dB @ 5 MHz/10 MHz offset, typical, 824 MHz to 894 MHz, 1710 MHz to 2170 MHz

–54 dB/-57 dB ± 1.0 dB @ 5 MHz/10 MHz offset, typical, 2300 MHz to 2700 MHz

Demodulation Measurements W-CDMA Modulations QPSK, QPSK-DTX (Codecs: AMR 4.75, 5.9, 7.4, 12.2 kbps, DTX 7.4, 12.2 kbps)

HSPA+ Modulations QPSK, 16 QAM, 64 QAM Frequency Error ± 10 Hz + time base error, 99 % confidence level

EVM Accuracy ± 2.5 %, 6 % ≤ EVM ≤ 25 % Residual EVM 2.5 % typical

Code Domain Power ± 0.5 dB for code channel power > –25 dB, 16, 32, 64 DCPH (test model 1), 16, 32 DCPH (test model 2, 3)

CPICH (dBm) Accuracy ± 0.8 dB typical

Over-the-Air (OTA) Measurements Scrambling Code Scanner Six strongest Scrambling Codes

Multipath Scanner Multipath power of six signals relative to strongest pilot

RF Demodulation Over-the-Air (OTA) Pass/Fail Band Spectrum Channel Spectrum

Channel Power Occupied Bandwidth Peak-to-Average Power

Spectral Emission Mask Single carrier ACLR Multi-carrier ACLR RF Summary

Code Domain Power Graph P-CPICH Power Channel Power Noise Floor

EVM

Carrier Feed Through Peak Code Domain Error Carrier Frequency Frequency Error Control Channel Power Abs/Rel/Delta Power

CPICH, P-CCPCH

S-CCPCH, PICH

P-SCH, S-SCH

HSPA+

Power vs. Time Constellation

Code Domain Power Table Code, Status EVM, Modulation Type Power, Code Utilization Power Amplifier Capacity

Codogram Modulation Summary

Scrambling Code Scanner (Six) Scrambling Codes

CPICH

Ec/Io Ec Pilot Dominance OTA Total Power

Multipath Scanner (Six) Six Multipaths Tau Distance

RSCP

Relative Power Multipath Power

View Pass/Fail Limits All, RF, Demod

Available Measurements Max Output Power Frequency Error

EVM

CPICH

Occupied Bandwidth Spectral Mask

ACLR

PCDE

P-CCPCH

S-CCPCH

Code Spread 3

PICH

Code 128

Test Models 1 (16), (32), (64) 3 (16), (32)

4 (+CPICH), (-CPICH)

5 (2 HS), (4 HS), (8 HS)

14 of 29 PN: 11410-00646 Rev. P MS2720T TDS

TD-SCDMA/HSPA+ Measurements (Option 882)

Measurements

Setup Parameters Slot Selection Auto, 0-6

Trigger Trigger Type (No Trigger/GPS/External), External Trigger (Rising/Falling), Tau Offset SYNC-DL Code Auto, 0-31

Scrambling/Midamble Code Auto, 0-127 Maximum Users Auto, 2, 4, 6, 8, 10, 12, 14, 16

Measurement Speed Fast, Normal, Slow User Selectable Uplink Switch Point, Number of Carriers (1, 3), Tau Offset

Demodulation Type Auto, QPSK, 8 PSK, 16 QAM, 64 QAM Frequency Center, Signal Standard, Channel #, Closest Channel, Decrement/Increment Channel Amplitude Scale/Division, Power Offset, Auto Range, Adjust Range, Units (dBm/Watts)

Sweep Hold/Run, Trigger Sweep Save/Recall Setup, Measurement, Screen Shots (JPEG - save only), to Internal/External Memory

Measurement Summary Screens Overall Measurements, RF Measurements, Modulation Measurements

RF Measurements RF Channel Power Accuracy (RRC) ± 1.5 dB, ± 1.0 dB typical, (slot power –40 dBm to +10 dBm)

Frequency Error ± 10 Hz + time base error, in the presence of a downlink slot

Demodulation Measurements Supported Modulation QPSK, 8 PSK, 16 QAM, 64 QAM

Residual EVM (rms) 3 % typical, P-CCPH Slot Power > –50 dBm PN Offset Within 1 x 64 chips

Pilot Power Accuracy ± 1.0 dB typical Timing Error (Tau) for Dominant SYNC-DL ± 0.2 µs (external trigger)

Spreading Factor 1, 16

Over-the-Air (OTA) Measurements Code Scanner 32 Sync Codes and associated Scrambling Code Groups

Tau Scanner Six strongest Sync Codes Auto Save Yes

GPS Tagging and Logging Yes

RF Demodulation Over-the-Air (OTA) Pass/Fail Channel Spectrum

Channel Power Occupied Bandwidth Left Channel Power Left Channel Occ B/W Right Channel Power Right Channel Occ B/W

Power vs. Time Six Slot Powers Channel Power (RRC) DL-UL Delta Power UpPTS Power DwPTS Power On/Off Ratio Slot Peak-to-Average Power

Spectral Emission RF Summary

Code Domain Power/Error

(QPSK/8 PSK/16 QAM/64 QAM)

Slot Power DwPTS Power Noise Floor Frequency Error Tau Scrambling Code

EVM

Peak EVM Peak Code Domain Error CDP Marker

Modulation Summary

Code Scan (32) Scrambling Code Group Tau Ec/Io DwPTS Power Pilot Dominance

Tau Scan (Six) Sync-DL# Tau Ec/Io DwPTS Power Pilot Dominance

Record Run/Hold

View Pass/Fail Limits All, RF, Demod

Available Measurements Occupied Bandwidth Channel Power Channel Power RCC On/Off Ratio Peak-to-Average Ratio Frequency Error

EVM

Peak EVM Peak Code Domain Error Tau Noise Floor

MS2720T TDS PN: 11410-00646 Rev. P 15 of 29

LTE/LTE-A FDD/TDD Measurements (Option 883)

LTE/LTE-A FDD Measurements

Setup Parameters Frequency E-UTRA Bands 1 - 14, 17 - 21, 23 - 32, 66A (tunable 10 MHz to 4.0 GHz)

Center, Signal Standard, Channel #, Closest Channel, Decrement/Increment Channel Bandwidth (MHz) 1.4, 3, 5, 10, 15, 20

Span (MHz) Auto, 1.4, 3, 5, 10, 15, 20, 30 Amplitude Scale/Division, Power Offset, Auto Range, Adjust Range

Sweep Single/Continuous EVM Mode Auto, PBCH only, Max Hold

Cyclic Prefix (CP) Auto, Normal, Extended Sync Type Normal (SS), RS/Cell ID

Save/Recall Setup, Measurement, Screen Shots (JPEG - save only), to Internal/External Memory Measurement Summary Screens Overall…