Attach_2_Technical_Evaluation_Sheet.pdf
PDF 40 KB Posted
- Attached to
- Dual Spindle CNC Lathe Federal contract opportunity
- Solicitation number
- FA4620-15-Q-A017
About this file
Attachment 2 Technical Evaluation Sheet
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| FA4620-15-Q-A017-0003.pdf | ||
| FA4620-15-Q-A017-0002.pdf | ||
| FA4620-15-Q-A017-0001.pdf | ||
| FA4620-15-Q-A017 _Dual_Spindle_Lathe.pdf | ||
| Attach_1 _SOW.pdf | ||
| Attach_3_Past_Performance_Questionnaire.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
FA4620-15-Q-A017
Attachment 2 Evaluation Sheet
Negotiation Sensitive or Source Selection Sensitive Information When Completed See FAR 2.1.1 and 3.104
FOR OFFICIAL USE ONLY
Negotiation Sensitive or Source Selection Sensitive Information When Completed See FAR 2.1.1 and 3.104
FOR OFFICIAL USE ONLY
FA4620-15-Q-A017
CNC Lathe
Pre-Award Technical Evaluation Score Sheet
Offeror Name: Lathe Make:
Evaluator Name: Lathe Model #:
CRITICAL ELEMENTS:
Machine Salient Characteristics & Requirements YES NO Box Guide Ways Built-in Motor Turret Coolant circulation through casting parts Job assistant software Cad-Cam view +/- 2.0" Y axis travel At least 26" max turn length At least 28" swing over cross slide At least 10" X axis travel At least 30" Z axis travel At least 28" 2nd spindle (B axis) travel 3.5" or greater spindle hole diameter Minimum spindle indexing increment .001 Deg.
Minimum spindle #1 rpm = 4000 Minimum spindle #2 rpm = 4000 At least 10 station turret for live tooling At least 28" tailstock travel Taper hole of tailstock spindle live center: MT5 10,000 rpm rotary live tool spindle drive 220v 120 AMP 3-Phase max power Y axis control High-pressure coolant Chip conveyor Live tooling Three jaw hydraulic chuck on Main and sub spindle Barfeed system Software Requirements YES NO The FeatureCAM software needed to operate this item currently exists in the section Computer Requirements YES NO Machine must be programmed at the controller and compatible with FeatureCAM software.
File details come from the government source that posted it. Updated .