Non-Nuclear_IDS_Equip_Approval_Sep_2014_(Attach_1).pdf

DEPARTMENT OF THE AIR FORCE ..

HEADQUARTERS UNITED STATES AIR FORCE

WASHINGTON, DC

MEMORANDUM FOR SEE DISTRIBUTION

FROM: HQ USAF/A7S

1030 AF Pentagon Washington DC 20330-1030

SEP 22 2014

SUBJECT: Non:-Nuclear Intrusion Detection System (IDS) Equipment Approval

1. The IDS equipment listed below is approved for use when employed in the tested PL-1 Non-Nuclear through PL-4 applications and configurations. This letter consists of eight pages.

(*Indicates correction, change, and/or addition.)

PL-1 Non-Nuclear and Below

Command, Control Display Equipment (CCDE)

Will-Burt Annunciator (product formerly produced by Diebold)

Will-Burt (Diebold)AN/GSX-4 Alarm Set, Anti-Intrusion, Restricted Area Annunciator with Access Control

Annunciator Version 6.4.21 Livemaprun (Graphics) Version 6J.20 through 6.1.24 Livemapedit (Graphics editor) Version 6.1.2

Will-Burt (Diebold) Annunciator Predator Elite, with integrated access control

Annunciator Version 3.2.274p, subpatch p32274.1.15.

Annunciator Version 3.2.274p Annunciator Version 3.0.252 Annunciator Version 3.0.246 LINX Predator Enrollment System Version 4.1.220 LINX Predator Enrollment System Version 4.0.203 LINX Versatile Interface Panel (VIP) Version 1.148 LINX Versatile Interface Panel (VIP) Version 1.64 LINX Versatile Interface Panel, Expandable (VIP-E) Version 7.284 LINX Versatile Interface Panel, Expandable (VIP-E) Version 7.145

FA4608-15-Q-S098, Attachment 1

The following is a list of all SmartLINX firmware versions for use with the AN/GSX-4 and Predator Elite:

SmartLINX Version 4.0C SmartRAM 4 x 4 Version 6.0K SmartMUX Version 3.SC SmartMON Version 3.3B SmartCON Version l .2A WSD Reader Version l .8V

Advantor Annunciator

Advantor Advantage Suite for Networks (ASN) Version 4.0

Advantor Advantage Suite for Networks (ASN) Version 5.0

Advantor Integrated Command, Control, and Access Control System Version 5.0

Advantor Integrated Command, Control, and Access Control System Version 5.0 Service Pack 6

(SP6)

Vindicator Annunciator

Vindicator Security Management and Reporting Terminal (SMART) Annunciator with Graphics Display:

Version 2.40 with Administrative Browser 4.0 Version 2.43, Build 11 Vindicator Command and Control (VCC) Version 1.0.1.5 Vindicator Access Control System (ACS) Version 2.3, Build 21 Transponder Firmware Version 2.28 TS 4000 Radio Frequency (R/F) Modem Interface

Vindicator SMART with Graphics Display Version 2.39 and SAW Version 3.9

Vindicator Command and Control Platform (VCCP) v5- Version 5.0

Vindicator Command and Control Platform (VCCP) v5- Version 6.0

Vindicator Command and Control Platform (VCCP) v5- Version 6.5 (Win 7, 32 bit only)

Vindicator Command & Control (VCC) GUI Version 5.1.1.4 Vindicator Badge Manager 2 (VBM 2) Version 2.0.7.0 Vindicator Badge Manager 2 (VBM 2) Version 2.0.7.1 (Win 7, 32 bit only) Vindicator Security Archive Workstation (SAW 5) Version 5.1.0.6 Honeywell Vindicator Site Commander Version 1.2.0.1 VS IDS Network Security Appliance-Intrusion Detection, Revision 3.2, Release 20:

UHS-8170

DES-8170T

AES-8170T

V5 ACS Network Security Appliance-Access Control Revision 3.2 Release 20:

UHS-1401

DES-1401T

AES-1407T

Vindicator UHS-Net Gateways:

UHS-8101 Version 2.33, Build 7 UHS-8102 Version 2.33, Build 6 UHS-8301Version2.33, Build 13 UHS-8400 Version 2.33, Build 13

Vindicator VHS-Net Transponder/Gateway Revision 3.3, Release 5:

UHS-1500

DES-1500T

AES-1500T

Vindicator VHS-Net Transponders Version 2.33, Build 13:

UHS-6842

UHS-6842F

DES-6842

DES-6842F

PC SMART PAC Software Package Version 5.1 Proteus5 & SmartSave 5 Software Programs Version 5 .2

Assessment Subsystems

Video Servers

Bosch Allegiant Matrix/Control System LTC 8600 and 8800

Broadware 4.80 I Cisco 5.1.1. Video Storage System (NOTE: Cisco renamed the 4.80 after purchasing Broadware.)

Nuclear Security Services Corporation (NSSC) Video Capture System (VCS) Mark XLC

Video Image Control and Display System (VICADS) Version 4.0 Video Management System

Open Roads Consulting, Inc Video Image Control and Display System (VICADS) Version 4.1 Video Management system in the following configuration:

Personal Viewer Workstation and VICADS NVR on a Windows 7, 64 bit operating system

VICADS Management Server on a Windows 2008 Server R2, 64 bit operating system using Vindicator V5, Version 6 as the annunciator

* Open Roads Consulting, Inc Video Image Control and Display System (VICADS) Version 4.1 Service Pack 1.6 Video Management system in the following configuration:

Personal Viewer Workstation and VICADS NVR on a Windows 7, 64 bit operating system

VICADS Management Server on a Windows 2008 Server R2, 64 bit operating system using Vindicator V5, Version 6.5 as the annunciator

Cameras

Bosch NWC-04-95-20P Internet Protocol (IP) Camera Bosch NWC-04-95-20P (1/3 Format) Bosch NBN-498-21P Internet Protocol (IP) Camera Bosch Auto Dome VG 4-322-ECElM Bosch Auto Dome VG5-623-ECS Bosch Auto Dome VG5~624-ECS Bosch Auto Dome VG5-724-ECE2

* Bosch Auto Dome 7000 Internet Protocol (IP) Camera with environmental housing

* Bosch Dinion Internet Protocol (IP) 7000 Camera with environmental housing Burle 300H Camera Burle TC 351 Camera (1/2 inch format) Cohu 4865 Camera (WS3) (2/3 inch format) Cohu 48x Camera (KUMMSC) (2/3 inch format) Cohu 4915/4912-3000 Camera (1/2 inch format) IQ Eye 752 Internet Protocol (IP) Camera Lumenera Le 165M-DN Internet Protocol (IP) Camera

* Lumenera Le 165ME-DN Internet Protocol (IP) Camera with environmental housing

* Lumenera Le 165MP-DN Internet Protocol (IP) Camera with environmental housing Pelco ES31 CB W3 5-2N Pan Tilt Zoom (PTZ) System Pelco.ES30C/ES31C Pan Tilt Zoom (PTZ) System (1/4 inch format) with/ without optional

Wiper Pelco ES4136-2N Esprit ES system Pan Tilt Zoom (PTZ) System (1/4 inch format) with/ without optional Wiper Pelco MC3651H-2 Interior Camera (1/3 inch format) Pelco IXE20 IP Camera Pelco ES4036-5W Esprit Series, with and without wiper, standard and pressurized Pelco ES40E36-5W Esprit Series, with and without wiper, standard and pressurized Pelco ES40/41 Series Positioning System, Analog, PTZ, w/wo wiper Esprit SE Standard &

Pressurized, model ES4036-5W Pelco ES40E/41E Series Positioning System, IP, PTZ, w/wo wiper Esprit SE Standard &

Pressurized, Model ES40E36-5W Vivotek IP 7151

Interior Sensors

NOTE: Balanced Magnetic Switch (BMS) should not be used as a line of detection.

AN/GSS-20 Volumetric

AN/GSS-9(V) SA 1955 BMS

AN/GPS-15(V) Closed-Shelter Aircraft Sensor (C-SAS) (Volumetric) AN/GSS-36(V) Open-Shelter Aircraft Sensor (0-SAS) (Volumetric) Bosch DS 9370 PIR/MW (Volumetric) Bosch DS 939 PIR (Volumetric) Dortronics 1110 x D x CT, Magnetic Lock/BMS Eltec 862 Passive Infrared (PIR) Sensor (Wall) GE AP669 PIR (Volumetric) Protech Passive Infrared and Microwave Intruder Detectors (PIRAMID) SDI-76-G (Volumetric) Protech Passive Infrared and Microwave Intruder Detectors (PIRAMID) SDI-77-D (Volumetric) Protech SDI-76M-HS1-H Volumetric (Coverage 60'x 40', Two Sensors in Combination)

Protech SDI-76MW Volumetric (Coverage 60'x 40', Two Sensors in Combination) Protech SDI-77XL2-EX, Explosion Proof Volumetric General Electric (Sentrol) Model 2700 Series BMS General Electric (Sentrol) Model 2807T Explosion Proof Balanced Magnetic Switch (BMS) General Electric (Sentrol) Model 2507 AH-L Wide Gap BMS General Electric (Sentrol) Model 2800 Series BMS Magnasphere, High Security Sensor (HSS) Door Contact Switch, BMS, Version HSSL2SOOO Visonic CH-1000 (Wall) Visonic CH-1000/Xtalis ADPRO 18 WH PIR Combination (Ceiling) (Coverage 30'x 30') Banner Engineering Series Active Infrared (AIR), intrinsically safe, Model SMI30 (Must be installed as an array of individually reporting sensor points, for use across openings in areas where explosive fumes may be present)

SightLogix SightSensor Video Motion Detection (VMD) using NS-90A Thermal Imager, for interior applications only.

PL&E Communications A VT 234 (VMD) using Dinion analog infrared imagers, for interior applications only

AN/GSS-39(V) Interior Intrusion Detection System. Components include:

-- DR-301 --DR-558 -- DR-851 -- HT-50B

--HT-50DC --HT-lOOB -- HT-lOOBC -- SDI-76A

-- SDI-77C -- SD-SOB -- SD-80EHB -- SD-150B

-- SD-150EHB -- SRN-2000H

Exterior Sensors

The following sensors are approved for use as a standalone line of detection:

EAG of Americas Infrared Intrusion Detection System 41212 (IIDS4/2/2) Active Infrared Sensor EAG of Americas Infrared Intrusion Detection System 414121212 w/ PSTC EAG of Americas Intrusion Detection System 4/2 (IDS 4/2) Active Infrared Sensor Microtrackburied line sensor (NOTE: Not approved for use in Northern tier, or areas where snow and ice accumulations are normal, pendingjurther testing) Omnitrax buried line sensor, OC2 cable Perimitrax, Buried Cable Intrusion Detection Sensor Protect (PIRAMID) I SDI-76-XL-MIL, PIR and Monostatic Microwave Sensor Racon Single Stack; Barksdale Configuration - single stack, basket weave configuration with double stacked sensors at the corners Racon Double Stack Racon 16000-4 (Microwave) Sensor Racon 14000-32 Microwave Sensor Racon MPS-4100 (Microwave) Racon MPS-14000-1 (Microwave) Senstar Sentrax Short Ported Coaxial Cable Sensor (SPCS), large and small diameter cable, in the straight-line configuration Birdeye Model IX Infrared Perimeter Detection System, up to 120m

* DeTekion Defensor 100 Fence Sensor DeTekion Vertical Taut Wire Sensor 400 (VTW-400), full fence or out-rigger configuration ECSI Infrared Pulsed Intrusion Detection System (IPIDS), up to 80m with spring loaded mount bases and lOOm with solid concrete bases

Fiber SenSys Fiber Defender FD200/300 series. The following models have been tested: 331, 332, 341, and 342. Note: The 331and332 series is with "Sensitive" Lead-in cables whereas the 341 and 342 series is with the "Insensitive" Lead-in cables. Also, the last digit (1 or 2) indicates a single channel processor or dual channel processor. Additional note: The 33x series is normally utilized for TASS applications with the 34x series being utilized for all hardwired configurations.

Fence Protection System 2-2R (FPS-2-2R) Southwest Microwave Intrepid Micropoint. (NOTE: Not approved for use in Northern tier, or areas where snow and ice accumulations are normal, pending further testing) Southwest (SW) Microwave 385 Monostatic Sensor, up to lOOm SW Microwave310 Bi-static Sensor, up to lOOm Fiber Optics Intrusion Detection System (FO-IDS), Fiber Optic Sensor System (FOSS) Models 100 and 200 Fiber SenSys Fiber Defender 525 (Note: Not approved for use in Northern tier, or areas where snow and ice accumulations are normal, pending further testing)

The following sensors in combination are approved for use as a line of detection with fence climber enhancement detection:

Enhanced DTR-90 Vertical Taut Wire (VTW) Sensor, the DTR 90 "Y" VTW Sensor, or the VTW 400 Sensor installed atthe top of the fence with any one of the following sensors installed on the fence:

Fiber SenSys Fiber Defender FD300 series. The following models have been tested: 331, 332, 341, and 342.

Fiber Optics Intrusion Detection System (FO-IDS), Fiber Optic Sensor System (FOSS) Models 100 and 200

Fence Protection System 2 (FPS-2) Fence Protection System 2-2R (FPS-2-2R)

Wide Area Detection/ Approach Zone Se.nsors deployed in front of an approved line of detection at the perimeter: ·

PSRS STS-350 (FLIR/ICx) Ground Based Radar used as an approach sensor out to 125 meters (crawlers) as described below:

ICX application software version 2.4.41.12 Firmware version 3.4.30 dated November2, 2007.

PSRS STS-350 (FLIR/ICx) with control station application software version 2.4.41.12 or when integrated with Will Burt Annunciator Version 3 .2.27 4p, subpatch p3227 4.1.15.

(KUMMSC)

PL-2 and Below

In addition to all of the above components, the following equipment is approved for use in the protection of PL-2 and below assets:

Command, Control Display Equipment (CCDE): No Additional

Assessment Subsystems: No Additional

Interior Sensors: No Additional

Exterior Sensors: No Additional

PL-3 and Below

In addition to all of the above components, the following equipment is approved for use in the protection of PL-3 and below assets:

Command, Control Display Equipment (CCDE)

*TASS 7.0 Annunciator (At deployed locations only) TASS 6.0.1.A Annunciator (At deployed locations only)

Assessment Subsystems

LRTI-CCTV C907891 Complete Kit LRTI-CCTV TICC/PTH only C907892 T-2000 LRTI w/CCTV Complete Kit IBDSS 1000-085 T-2000 LRTI w/CCTV TICC/PTH only IBDSSI000-086 Wide Area Surveillance Thermal Imager (WSTI) Sentry I and Sentry II Short Range Thermal Imager; Fixed/Mounted(SRTI F/M) DiOP Thermal Imager 180/60mm Thermal Upgrade Kit (TUK)

Interior Sensors: No Additional

Exterior Sensors: No Additional

In addition to all of the above components, the following equipment is approved for use in the protection of PL-4 assets:

Command, Control Display Equipment (CCDE): No Additional

Assessment Subsystems: No Additional

Interior Sensors: No Additional

Exterior Sensors: No Additional

2. Test Area C-3, Eglin AFB FL, is approved for conducting operational test and evaluations on all IDS equipment.

3. A listing of equipment approved for rise in PL-1 Nuclear applications is available in a separate letter maintained by the POC listed below.

4. This memorandum supersedes the 29 Jan 14 IDS approval memorandum. The POC is Mr. Warren Greene, HQ AFSFC/SFXR, DSN 945-7072.

DISTRIBUTION:

AFDW/A7S

HQ USAFE/ A 7S

HQAFMC/A7S

HQ PACAF/A7S

HQAETC/A7S

HQ AFSPC/ A 7S

HQ AFSOC/A7S

HQAFRC/A7S

HQAMC/A7S

HQACC/A7S

HQ AFGSC/A7S

NGB/A7S

HQUSAFA/SF

HQ USAF/A7SX

HQ USAF/A7SO

HQ AFLCMC/HBU

HQ, AFSFC/SFX

HQ AFLCMC/HNC (CCSD)

ALLEN J. J SO , Brig Gen, USAF Director of Sec

• Forces

DCS/Logistics, Installations & Mission Support