Solicitation Amendment FA301020R00190001 SF 30.pdf

R

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers is extended. is not extended.

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:

(a) By completing items 8 and 15, and returning copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or electronic communication which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by letter or electronic communication, provided each letter or electronic communication makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NUMBER AS DESCRIBED IN ITEM 14.

CHECK ONE A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER

NUMBER IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation data, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print) 16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

15B. CONTRACTOR/OFFEROR

(Signature of person authorized to sign)

15C. DATE SIGNED 16B. UNITED STATES OF AMERICA

(Signature of Contracting Officer)

16C. DATE SIGNED

Previous edition unusable STANDARD FORM 30 (REV. 11/2016) Prescribed by GSA FAR (48 CFR) 53.243

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. CONTRACT ID CODE PAGE OF PAGES

2. AMENDMENT/MODIFICATION NUMBER 3. EFFECTIVE DATE 4. REQUISITION/PURCHASE REQUISITION NUMBER 5. PROJECT NUMBER (If applicable)

6. ISSUED BY CODE 7. ADMINISTERED BY (If other than Item 6) CODE

8. NAME AND ADDRESS OF CONTRACTOR (Number, street, county, State and ZIP Code) (X) 9A. AMENDMENT OF SOLICITATION NUMBER

9B. DATED (SEE ITEM 11)

10A. MODIFICATION OF CONTRACT/ORDER NUMBE

10B. DATED (SEE ITEM 13)

CODE FACILITY CODE

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

Section B - Supplies or Services & Prices or Costs

The following CLIN(s) / SLIN(s) were modified:

0001 - MAHG141068 Repair Admin Restrooms Bldg 4002 Purchase Request: F2J31D0091AW02

INFORMATION FROM TO

CIN 00000000000005332308

Section C - Specification/SOW/SOO/ORD

Miscellaneous text in this section has been modified to:

1. It appear all the walls in both restroom are block walls? Are the walls going to be furred out for the new electrical installation for power and lighting and flush sensor wiring? If not, how are we to proceed with the rough in on the conduit in the block walls?

ANSWER: For the men's room hand dryers: Fur-out wall 1" and hang 5/8" moisture resistant gypsum sheathing.

Run new conduit inside furring for hand dryers. All other new power requirements to use existing chase walls.

Punch through block as needed.

2. During the site visit, the closest electrical closet appeared to have no spare breakers in any of the existing panelboard. How are we to proceed?

ANSWER: There are about 20 spare breaker spots within the panels located in the electrical closet adjacent to the men's room.

3. The SOW is calling for GFCI receptacles to be installed in both restrooms. The drawings don't show the new locations of the GFCI receptacles. What are the locations and what size wire is required? What panel are they feeding from? How far is the panelboard from the restroom?

ANSWER: Replace existing outlets only.

4. The SOW is calling for power for Automatic hand dryers to be install in both restrooms. What size breakers are require for each hand dryer? What size wire is required? What panel are they feeding from? What size conduit is required? How far is the panelboard form the restroom?

ANWER: 20 Amp For each, #12 GA copper wire. The panel is adjacent to the male restroom

5. The SOW is calling for wall mounted occupant sensors to be installed in place of the wall switch in each of the restrooms. When a person enters a stall the motion sensors will turn off the light when motion is not detected. Is this the correct type and location occupancy sensor?

ANSWER: Delete requirement for wall mounted sensors at the existing switch. Reuse existing switch. Add ceiling mounted Dual IR for lighting circuit. Place in restroom ceiling for best detection of occupancy.

6. The SOW calls for automatic Motion sensor faucets. Are automatic Motion sensor faucets battery power or 120v power? What size wire is required? What panel are they feeding from? How far is the panelboard from the restroom?

ANSWER: They are Battery Operated.

FA301020R00190001

7. In the womens restroom there is an existing fire alarm speaker strobe wall mounted above the mirror, is it to remain?

ANSWER: Refer to SOW page 3 of 17 ( LEAVE INTACT AND OPERABLE).

8. Can a scale drawing be provided to show the closest electrical room with panelboard that has spare circuits?

Also the breaker type required for the panelboard?

ANSWER: The panel in adjacent to the male restroom. 20 Amp for each hand dryer.

9. On the SOW, all toilets are "Right height flush valve toilets", but, on the plumbing schedule (specs), the ADA toilets are flush valve and the remaining toilets are "tank type". Which is correct? ANSWER: All toilets to be flush valve type.

10. The two toilets that are being converted to ADA, what is their current distance from the finished wall to the center of the toilet (Left to Right/Right to Left)? ADA standard is 18" minimum. If they are less than the ADA standard, the drain piping will have to be moved accordingly which will require jack-hammering concrete.

ANSWER: They are 18".

11. The 1442 says that the bid time is 2:00AM. Please confirm that the time should read, "2:00PM"?

Answer: Yes, the bid time is 2:00 PM. This has been corrected on amendment 00001

Section J - List of Attachments

The following attachments were added:

Attachment 10 - Addendum #1

FA301020R00190001

310 M ST BLDG 4605

CP 228 377 3230

KEESLER AFB, MS 39534-2701

United States Clayton Petrie, Email: clayton.petrie@us.af.mil Telephone: 228-377-1807

1. Provide questions and answers from the site visit

2. Provide attachment for addendum 1

3. Change the time proposals are due from 2:00 am to 2:00 pm

Email: katie.fulford.1@us.af.mil Telephone: 228-377-5504