Attachment_QA_1_Carcom_filter.pdf

TECUL Series

TECUL Series - Extended Range Buffer Networks (Inductive Input)

Corcom Facility EMI Filters Product Guide Catalog: 1654986

Issue Date: 06.2011

Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric USA Cust. Svc.: 1-800-468-2023 equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. Corcom Prods: 1-847-680-7400 te.com corcom.com

Filter Cabinet

• Modified NEMA I, constructed of not less than #14 gauge CRS with galvanized bulkhead

• WHITE epoxy finish to all non-conductive surfaces

• Brush-plated electro-tin on all conductive surfaces

• R.F. Radiation of the shielded (load) compartment greater than 100 dB from 14 kHz to 10 GHz

• Front cover access, dual cover design

• Filter inserts pre-wired to standoffs and lugs

• Lifting hooks and mounting tabs

• Legs for floor mount available (see page 24)

Individual Filters

• Sealed components with welded seams

• Constructed of not less than #16 gauge steel with corrosion resistant plating

• Bleeder resistor to eliminate shock hazard provided

• HEMP Surge arrestors provided upon request‡

Electrical Characteristics

Voltage Drop:

Less than 1% @ unity power factor

Overload:

140% of rated current for 15 minutes

Harmonic Distortion:

Less than 2% @ full rated current

Dielectric Withstanding Voltage:

Per MIL-PRF-15733 and UL1283

D.C. Insulation Resistance:

Per MIL-STD-202, Method 302

Terminal Strength:

Per MIL-STD-202, Method 211, Condition E

Temperature Rise:

Per MIL-PRF-15733 and UL1283

R.F. Radiation:

100 dB minimum shielding effectiveness

Insertion Loss:

100 dB from 14 kHz - 10 GHz per MIL-STD-220B, under load condition, using extended range buffer networks over the frequency range of 14 kHZ - 20 MHz

Applicable Publications:

MIL-PRF-15733 — Filters, radio interference MIL-STD-202 — Test methods for Components MIL-STD-220B — Test method of Insertion Loss

MIL-STD-188-125-1 — HEMP

MIL-STD-285 — Test method for Shielding Effectiveness NFPA 70-1987 — National Electric Code 486A - 1983 — Wire Connectors and Lug UL1283 — UL standard for EMI Filters

How to Order:

TECUL 4 01000 A6 U -S -L

Voltage/Frequency A6 - 120/208V, 60Hz B6 - 277/480V, 60Hz

Legs Surge Arrestors (optional)

Orientation Blank - Shielded compartment on top U - Shielded compartment on bottom

Current Rating

# of Filtered Phases Series

Examples:

TECUL401000A6-S-L =

4 phases 1000A (each consisting of 3, 400A TECUL 120/208V filters) in a cabinet with surge arrestors and legs

TECUL300225B6 =

3 phases 225A TECUL, 277/480V filters in cabinet

Note 1: Surge Arrestor for A6 Models: V251BA60

Surge Arrestor for B6 Models: V481BA60

Note 2: Current rating always listed as 5 digits with leading zeros

‡ Intended for HEMP applications >225A. For filters rated <150A refer to the CDEUL Series on page 12.

Shown with optional legs Center mounting bracket not installed on all sizes

Intertek Listed Filter Panel

UL Recognized Filters

TECUL Series - ERBN (Inductive Input) (continued)

Corcom Facility EMI Filters Product Guide Catalog: 1654986

Issue Date: 06.2011

Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric USA Cust. Svc.: 1-800-468-2023 equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. Corcom Prods: 1-847-680-7400 te.com corcom.com

A E C

D B

R em ov ab le In d iv id ua l P ha se

F ilt er s

Mounting Brackets

Area for Conduit Penetration

Removable Cover

Removable Cover

RF

Gasket

Max. Operating Voltage A6: 120/208V, 60 Hz B6: 277/480V, 60 Hz

C o rco m Facility E

M I F ilters — N E M A C ab inet Style

For optional legs, refer to page 24

Recommended torque for fasteners on removable cover: 25 in. lb. ± 3 in. lb.

Center mounting bracket not installed on all sizes

# Filtered phases Dimensions Weight @ rated current A B C D E (Pounds/KG) 2 @ 225A 16.0 54.0 14.0 42.0 18.0 380

406.4 1371.6 355.6 1066.8 457.2 172.4 3 @ 225A 23.0 54.0 14.0 42.0 25.0 520

584.2 1371.6 355.6 1066.8 635.0 235.9 4 @ 225A 30.0 54.0 14.0 42.0 32.0 700

762.0 1371.6 355.5 1066.8 812.8 317.5 2 @ 400A 22.0 64.0 26.0 61.5 24.0 800

558.8 1625.6 660.4 1562.1 609.6 362.9 3 @ 400A 30.0 64.0 26.0 61.5 32.0 1100

762.0 1625.6 660.4 1562.1 812.8 498.9 4 @ 400A 38.0 64.0 26.0 61.5 40.0 1400

965.2 1625.6 660.4 1562.1 1016.0 635.0 2 @ 800A 38.0 70.0 26.0 67.5 40.0 1400

965.2 1778.0 660.4 1714.5 1016.0 635.0 3 @ 800A 56.0 70.0 26.0 67.5 58.0 2100

1422.4 1778.0 660.4 1714.5 1473.2 952.5 4 @ 800A 72.0 70.0 26.0 67.5 74.0 2600

1828.8 1778.0 660.4 1714.5 1879.6 1179.3

2 @ 1000 or 1200A 56.0 70.0 26.0 67.5 58.0 2000

1422.4 1778.0 660.4 1714.5 1473.2 907.2

3 @ 1000 or 1200A 82.0 70.0 26.0 67.5 84.0 3000

2082.8 1778.0 660.4 1714.5 2133.6 1360.8

4 @ 1000 or 1200A 106.0 70.0 26.0 67.5 108.0 3800

2692.4 1778.0 660.4 1714.5 2743.2 1723.6 david Highlight david Highlight david Highlight