Attch_1c_-_TO_0003-_Sample_Technical_PWS_24Apr17.pdf

ATTACHMENT 1c

Contract: MS&A FOR SPACE AND CYBERSPACE CAPABILITIES (MSCC) Task Order: SAMPLE TECHNICAL TASK ORDER Organization: HQ AFSPC/A9XY Address: 150 Vandenberg St, Ste 105, Peterson AFB, CO 80914-4570 Date: 24 April 2017

Executive Summary

HQ AFSPC/A9XY and HQ AFSPC/A3Z are responsible for objective and responsive Modeling, Simulation, and Analysis (MS&A) and decision support for space and cyberspace analyses. This contract represents technical and support requirements for space and cyberspace analysis to include engineering/engagement, mission, and theater/campaign MS&A. The “Sample Technical Task Order (TO)” will be evaluated for contract award, but not awarded.

1. PURPOSE

The overall purpose and objective of this TO is to assist HQ AFSPC/A9XY in the development/modification of MS&A and decision support tools as well as the analysis of space and cyberspace capabilities that provide tactical, operational, and strategic level support to meet military and national objectives.

2. SCOPE

The contractor shall assist HQ AFSPC/A9XY and HQ AFSPC/A3Z with management of Government MS&A tools and analytical decision support tool development, modification, and analysis in support of space analyses and cyberspace analyses. The overall contract will require space and cyberspace knowledge coupled with MS&A expertise, analytical understanding, and software management acumen. The contractor must also possess experience with military weapon systems (e.g., aircraft, ship, tanks, and munitions) associated with Tactics, Techniques, and Procedures (TTPs); and Combatant Command (CCMD) operations at the tactical, operational, and strategic level. Finally, the contractor must also possess experience and skills in joint/combined operations analysis (e.g., math, probability, operations research, and engineering).

The contractor may need to interface with other AFSPC units and organizations, other AF Major Commands (MAJCOMs), AF Research Laboratories (AFRL), Headquarters Air Force (HQ AF), other services (e.g., US Army and US Navy), United States Strategic Command (USSTRATCOM), US Cyber Command (USCYBERCOM), Department of Defense (DoD), National Aeronautics and Space Administration (NASA), National Reconnaissance Office (NRO), and non-DoD government and commercial space entities to accomplish this contract.

The MS&A tools and analytical decision support tools may support such activities as long-range planning, strategic analysis, force-mix studies, acquisition decision-making, requirements development and assessment, warfighter analysis, Analysis of Alternatives (AoAs), and/or operational missions.

3. REQUIREMENTS/DESCRIPTION OF SERVICES

The contractor shall provide professional, administrative, technical, and management support to AFSPC in support of MS&A services for AFSPC missions. The contractor shall maintain a skilled staff to ensure contractual tasks, requirements, and deliverables are successfully executed.

Requirements 1 and 4 of the Basic Indefinite Demand-Indefinite Quantity (IDIQ) contract Performance Work Statement (PWS) shall be used as reference for this task order to provide overall technical management and integration for all activities associated with the Basic IDIQ contract.

3.1 Using the analysis process in Figure 3 of the overall PWS, the contractor shall demonstrate ability to plan and execute a 6-month analysis effort on the impact of a single space capability on an operational warfighter mission. The contractor DOES NOT have to perform the analysis, just demonstrate the ability to plan and execute the analysis.

To successfully complete the Sample technical task, the contractor shall perform the following tasks at the UNCLASSIFIED level

3.1.1 Work Plan: The plan shall identify the schedule for key activities and resources required (time, personnel, equipment, and labor and ODC costs, milestone dates, etc) to accomplish the work.

Deliverable: CDRL A099, Technical and Management Work Plan

3.1.2 Select one of the following warfighter missions from the air, land, maritime, or littoral domains to inject Satellites Communications (SATCOM) capabilities.

• Deep Strike

• Forward Operating Base/Combat Outpost (FOB/COP)

• Surface Warfare

• Amphibious Operations

Deliverable: Rationale for the warfighter mission selected. CDRL A100, Technical Report – Study/Service.

3.1.3 Develop the Joint Mission Thread (JMT), Space Touch Points (TPs), and Military Utility Analysis (MUA) Influence Diagram (ID) for the selected Space Capability and Warfighter Mission

Deliverable: Copy of JMT, Space TPs, and MUA Influence Diagram. CDRL A100, Technical Report

– Study/Service.

3.1.4 Identify recommended Space MOPs and Space MOEs for the space capability selected.

Identify analysis organization(s) to convert Space Measures of Performance (MOPs) into Space Measures of Effectiveness (MOEs).

Deliverable: Recommended Space MOPs, Recommended Space MOEs, Recommended Analysis Organizations. CDRL A100, Technical Report – Study/Service.

3.1.5 Identify recommended MS&A tool(s) to emulate the JMT, Space TPs, and ID and convert Space MOEs into Warfighter MOEs as well as the rationale for MS&A tool selection. Identify recommended Warfighter MOEs for warfighter mission selected and provide recommended sample Warfighter MOE outputs of interest to AFSPC Leadership.

Deliverable: – Recommended MS&A Tools and Rationale, Recommended Warfighter MOEs and Sample MOE Outputs. CDRL A100, Technical Report – Study/Service

3.1.6 Discuss the key factors to integrate the mission-level warfighter MOE results into the joint campaign-level analysis. Identify recommended warfighter Measures of Outcome (MOOs) and provide sample Warfighter MOO outputs of interest to AFSPC Leadership.

Deliverable: Key Warfighter MOE-to-MOO Integration Factors, Recommended Warfighter MOOs and Sample MOO Outputs. CDRL A100, Technical Report – Study/Service

4 TO CONTRACTUAL REQUIREMENTS: All requirements outlined in section 4 of the Basic IDIQ contract are applicable to this TO.

5 SERVICE SUMMARY (SS): Reference the Basic IDIQ PWS, Section 5, in addition to this TO.

Performance Objective Performance Threshold Assessment Method/

Frequency (SS-1) Provide accurate technical and analytical advice, guidance, and products as required by individual task order.

Contractor receives no more than one (1) formal, validated complaint/ contract discrepancy report per year

Monthly, COR will evaluate customer feedback

100% Inspection of Deliverables

(SS-2) Provide timely response to time-sensitive requirements, including short notice requirements and a large number of requirements in a short period (surge capability)

Contractor receives no more than one (1) formal customer complaint/ contract discrepancy report per year from all task orders

Monthly, the COR will evaluate customer feedback

Periodic Assessment/ Inspection

100% Inspection of Deliverables

(SS-3) Compliance with DD Form 254, Contract Security Classification Specification, to include proper handling, storage, transmission, and destruction of Controlled Unclassified Information (CUI) and classified materials.

No Security violations or infractions.

Monthly, COR will evaluate compliance with DD254, to include proper handling, storage, transmission, and destruction of classified.

Periodic Assessment/ Inspection

(SS-4)

Requirements/deliverables completed in an accurate, timely manner in compliance with individual PWS requirements.

No more than three (3) late documents per year per task order and no more than two (2) working days late. No more than two (2) sets of corrections/edits and all corrections must be accomplished within two

(2) working days, or other such time periods as established in the task order.

Monthly, COR will evaluate requirements/deliverables completed in an accurate, timely manner in compliance with individual task order requirements

100% Inspection of Deliverables

6 GOVERNMENT-FURNISHED PROPERTY/INFORMATION (GFP/GFI): Reference the Basic IDIQ PWS, Section 6, in addition to this TO.

7 CONTRACTOR IDENTIFICATION: Reference the Basic IDIQ PWS, Section 7, as needed for this TO.

8 DOCUMENTATION AND DATA MANAGEMENT: Reference the Basic IDIQ PWS, Section 8, as needed for this TO.

9 PERSONNEL SECURITY: Reference the Basic IDIQ PWS, Section 9, as needed for this TO.

10 ACCESS TO GOVERNMENT PROPERTY AND FACILITIES: Reference the Basic IDIQ PWS, Section 10, as needed for this TO.

11 CONTRACTOR SPECIAL COMPARTMENTED INFORMATION FACILITY (SCIF): Not applicable for this TO – contractor shall complete task order at the UNCLASSIFIED level.

12 SECURITY ISSUES: Reference the Basic IDIQ PWS, Section 12, as needed for this TO.

13 SYSTEM AND NETWORK AUTHORIZATION ACCESS REQUESTS: Reference the Basic IDIQ PWS, Section 13, as needed for this TO.

14 TRAVEL: The following travel requirements are required for this TO: two (2) trips from Colorado Springs to Washington, DC; two (2) trips from Colorado Springs to Los Angeles AFB, CO; and two (2) trips for Colorado Springs to Offutt AFB, NE.

15 MATERIALS AND OTHER DIRECT COSTS (ODCs): Reference the Basic IDIQ PWS, Section 15, as needed for this TO.

16 TRAINING: Reference the Basic IDIQ PWS, Section 16, as needed for this TO.

17 DATA DELIVERABLES: Reference the Basic IDIQ PWS, Section 17, in addition to this TO.

CDRL Requirement Description CDRL A099 3.4.1.1 Technical and Management Work Plan CDRL A100 3.1.1.7 Technical Report – Study/Service.

Rationale for the warfighter mission selected.

CDRL A100 3.1.1.7 Technical Report – Study/Service.

Copy of JMT, Space TPs, and MUA Influence Diagram.

CDRL A100 3.1.3.1.2 Technical Report – Study/Service.

Potential Space MOPs, Potential Space MOEs, Potential Analysis Organizations.

CDRL A100 3.1.3.2.4 Technical Report – Study/Service.

Potential MS&A Tools and Rationale, Potential Warfighter MOEs and Sample MOE Outputs.

CDRL A100 3.1.3.6 Technical Report – Study/Service.

Key Warfighter MOE-to-MOO Integration Factors, Potential Warfighter MOOs and Sample MOO Outputs.