EXHIBIT C - Calculation of Self-Performed Work 36C24421R0005.docx
DOCX document 39 KB Posted
- Attached to
- Z1DA--Retro-Commissioning Mechanical Corrections -- Federal contract opportunity
- Solicitation number
- 36C24421R0005
About this file
This exhibit provides a template for calculating self-performed work on a federal construction contract. The contractor must self-perform a minimum of 15% of the total work amount. The template includes spaces to provide the total offer price, subtract specialty trades and overhead not self-performed, show the remainder as the total contract work amount, and the dollar amount to be self-performed. This must equal at least 15% of the total contract work amount. Contractors may receive additional consideration if they can self-perform major construction elements like pre-fabricated concrete. The contractor must clearly describe the specific work they will self-perform and show the calculation demonstrating it meets the 15% minimum.
The related federal opportunity is a special notice to provide proposals to retro-commission mechanical corrections for the Department of Veterans Affairs Veterans Health Administration Veterans Integrated Service Network 4. No further details are provided on requirements, response date, or award information.
View the file
Other files for this federal contract opportunity
Show all 24
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
EXHIBIT C - CALCULATION OF SELF-PERFORMED WORK
EXHIBIT C - CALCULATION OF SELF-PERFORMED WORK
SUBMITTED IN RESPONSE TO Request For Proposal 36C24421R0005 Use a format similar to the following to identify and calculate cost of the work to be self-performed. Refer to the definitions pertaining to “Self-performance of work”, “On the Site” and “Total amount of work to be performed under the contract”.
Explain in detail how you will perform the minimum percentage required (15% GC) with your own resources. Note: An offeror who has the capability to perform both as a General contractor and self-perform a major element of construction, for example, pre-fabricated concrete, may be afforded additional consideration in the evaluation. You should address your general self-performance capability.
(Includes mobilization and utilization of owned or rented plant and equipment to be operated by the prime contractor’s own employees; only those materials which will be both purchased and installed by the prime’s own forces; labor associated with those aforementioned materials or equipment; only those supplies to directly support work performed by the contractor’s own employees; and the contractor’s own job overhead costs.)
Clearly describe the work to be self-performed:
Show Calculation of Self-Performed work:
B.1 Total Offer Price: $
B.2 If applying for consideration as a General Contractor subtract Specialty Trades (Unless being self performed)
B.3 Subtract G&A, home office overhead, prime contractor’s markups for profit, bond, state use tax, etc. ($)
B.4 Remainder is “Total amount of work to be performed under the Contract” = $
B.5 “Work to be self-performed”: = $ Amount shown on this line should match the amount shown for “Show Calculation of Self-Performed work”?
(Includes mobilization and utilization of owned or rented plant and equipment to be operated by the prime contractor’s own employees; only those materials which will be both purchased and installed by the prime’s own forces; labor associated with those aforementioned materials or equipment; only those supplies to directly support work performed by the contractor’s own employees; and the contractor’s own job overhead costs.)
B.6 15 % Self-performed Work = Line B.5 / B.4 X 100% = %
File details come from the government source that posted it. Updated .