THE TEXAS A&M UNIVERSITY SYSTEM

Office of Procurement and HUB Program

REQUEST FOR QUALIFICATIONS

CONSTRUCTION MATERIALS TESTING SERVICES

RFQ NUMBER: RFQ-01-FPC-26-269

QUALIFICATIONS SUBMITTAL MUST BE RECEIVED BEFORE:

2:00 P.M. Central Time on July 15, 2026

EMAIL RFQ RESPONSES TO:

SOPROCUREMENT@TAMUS.EDU

SUBJECT LINE: FPC-26-269 CONSTRUCTION MATERIALS TESTING SERVICES

NOTE: SUBMITTAL must be received by The Texas A&M University System Office of Procurement and HUB Program before the date and time specified for receipt of submittal as stated within Section 2.4 of this RFQ. After the due date and time, only the names of respondents will be made public.

REFER INQUIRIES TO:

Jeff Zimmermann, Executive Director

Procurement and Business Services | VetHUB Program The Texas A&M University System soprocurement@tamus.edu

All submittals shall become the property of the State of Texas upon receipt. Submittals may be subject to public review after contracts have been executed. Refer to Section 5.G. for more information regarding public information.

mailto:SOPROCUREMENT@TAMUS.EDU mailto:Soprocurement@tamus.edu

The Texas A&M University System RFQ-01-FPC-26-269 Page 2 of 37

TABLE OF CONTENTS

SECTION 1. GENERAL

SECTION 2. INSTRUCTIONS FOR RESPONDENTS

SECTION 3. SCOPE OF WORK

SECTION 4. STATEMENT OF QUALIFICATIONS

SECTION 5. GENERAL TERMS AND CONDITIONS

Exhibit A – Execution of Offer

Exhibit B – Non-Collusion Affidavit

Exhibit C – Serivice Location Matrix

Exhibit D – Insurance

Exhibit E – Master Services Agreement (Draft)

Attachment A – Subcontracting Plan Instructions

The Texas A&M University System RFQ-01-FPC-26-269 Page 3 of 37

SECTION 1

GENERAL

1.1 Scope

The Texas A&M University System (“A&M System”), Office of Facilities Planning & Construction (“FP&C”), is soliciting Statements of Qualifications (“Qualifications”) from companies (also hereafter referred to as “Respondent”) with an established history of expertise and qualifications for Construction Materials Testing (CMT) services (“Services”).

The A&M System is dedicated to the ongoing program to improve and expand all physical facilities in support of the teaching, research, and service missions of each university and agency of the A&M System.

It is the intent of the A&M System to establish a master services agreement (“Agreement”) with more than one company to meet its needs. The required services shall be administered in accordance with the terms, conditions, and requirements set forth in this Request for Qualifications (RFQ) for all FP&C managed construction projects. This shall also apply to work or projects done by other A&M System universities and agencies (“Members”) that may choose to utilize an awarded Respondent of this RFQ.

By submitting a response, each Respondent certifies that it understands this RFQ and has full knowledge of the scope, nature, quality, and the amount of the work to be performed, the detailed requirements of the services to be provided, and the conditions under which the services are to be performed.

1.2 About the A&M System

The Texas A&M University System is one of the largest and most impactful higher education systems in the country, with an annual budget of $8.1 billion. Its statewide network includes 12 universities, a comprehensive health science center, eight state agencies, Texas A&M–Fort Worth and Texas A&M– RELLIS. The Texas A&M University System serves approximately 175,000 students and reaches millions more through service, research and outreach programs each year. With nearly $1.6 billion in annual research expenditures, the A&M System fuels innovation, supports communities and drives Texas’ economy forward. More information about the Texas A&M University System and all of its members can be found at http://www.tamus.edu/about/.

1.3 Purpose

The purpose of this RFQ is to solicit qualifications from companies who can provide construction materials testing services to the A&M System. Refer to Section 3 for the full Scope of Work and requirements.

The intent of this RFQ is to allow all interested / prospective companies to provide a sufficient amount of information that will enable the A&M System to assess the qualifications of the Respondent. To this end, each Respondent shall furnish, as a part of the qualifications, a complete general description of experience in their respective fields.

By submitting qualifications, each Respondent certifies that it understands this RFQ and has full knowledge of the scope and nature of the opportunity described herein. Each Respondent also certifies that it understands that all costs relating to preparing and responding to this RFQ will be the sole responsibility of the Respondent.

1.4 Priorities/Expectations

(a) Ensuring a Quality Level of Service. This priority encompasses the quality of the level of service that can be provided to all A&M System members in a timely, cost-effective manner. A&M System is seeking a Respondent(s) that will ensure the provision of such quality in its delivery of http://www.tamus.edu/about/

The Texas A&M University System RFQ-01-FPC-26-269 Page 4 of 37 service through proven techniques and established practices.

(b) Level of Experience and Expertise. Respondent must demonstrate its capabilities in providing the utmost level of experience and expertise to ensure a successful project as determined by A&M System.

(c) Delivery Efficiency. Respondent must demonstrate its ability to deliver the required services in a timely manner while not sacrificing the quality required by a Tier I research System.

1.5 Performance Period

The intention of this RFQ is to qualify companies to be included in a pool for the services defined in this RFQ. Should A&M System, in its sole discretion, enter into an Agreement with the successful Respondent(s) as a result of this RFQ, the Agreement shall be effective as of the date that is agreed upon by A&M System and successful Respondent(s). A&M System anticipates that the initial term of any such Agreement will extend for three (3) years, with the option to renew for up to two (2) additional one (1) year terms, providing all parties mutually agree on the extension. Any extensions shall be at the same terms and conditions plus any approved changes to be determined by A&M System and negotiated in writing with the successful Respondent(s).

The Texas A&M University System RFQ-01-FPC-26-269 Page 5 of 37

SECTION 2

INSTRUCTION FOR RESPONDENTS

2.1 General Information

The A&M System is soliciting submittals from qualified companies who have significant experience in providing Construction materials Testing services for institutions of higher education. These basic services are outlined in the Scope of Work (Section 3) and are intended to be provided under the general supervision of FP&C. However, the individual A&M System Members also have authority and option to utilize any resulting Agreement for these services.

This RFQ outlines scope and requirements in Section 3. Submittals are to be in accordance with all scope, requirements, and terms contained herein, and remain in effect a minimum of 120 days from the date of submission and may be subject to further extensions as negotiated. A statement to this effect should be contained in the Respondent's cover letter.

The Respondents selected shall have an excellent track record for providing these services relative to the size and scope of A&M System projects and shall agree to provide these services to A&M System with a top priority commitment. The A&M System may select as many Respondents as needed to ensure coverage throughout the State of Texas at the various System Members’ locations.

This RFQ contains specific requests for information. Respondents are encouraged to examine all sections of this RFQ carefully, in that the degree of interrelationship between sections is critical. In responding to this RFQ, Respondents are encouraged to provide any additional information they believe relevant.

Clause headings appearing in this RFQ have been inserted for convenience and ready reference. They do not purport to define, limit or extend the scope or intent of the respective clauses. Whenever the terms “must", "shall", "will", "is required”, or "are required” are used in the RFQ, the subject being referred to is to be a required feature of this RFQ and critical to the resulting submittal.

In those cases where mandatory requirements are stated, material failure to meet those requirements could result in disqualification of the Respondent's response. Any deviation or exception from any requirements or terms of the RFQ must be clearly identified by the Respondent in its submittal.

2.2 Calendar of Events

Activity Responsibility Date

Release of RFQ A&M System June 18, 2026

Deadline to Submit Questions Respondent July 2, 2026

Release of Addendum (if applicable) A&M System July 9, 2026

RFQ Responses Due Respondent July 15, 2026

Selection of Qualified Respondents A&M System TBD

The A&M System will make every effort to adhere to the above schedule. The schedule, however, is subject to change. This may be in the event that further clarification of responses or terms of contract are in the best interest of A&M System and/or in the event A&M System requires more time to assure that the selection of the Respondent is in accordance with its policies, rules and regulations, as well as actual timing needs.

2.3 Examination of the Request for Qualifications

Before submitting, each Respondent will be held to have examined the A&M System requirements outlined in Section 3 and satisfied itself as to the existing conditions under which it will be obligated

The Texas A&M University System RFQ-01-FPC-26-269 Page 6 of 37 to perform in accordance with specifications of this RFQ.

No claim for additional compensation will be allowed due to unfamiliarity with the specifications and/or existing conditions. It shall be understood that the Respondent has full knowledge of all the existing and/or revised conditions and accepts them "as is."

2.4 Submittal Instructions

All qualification submittals must be received by A&M System no later than 2:00:00 p.m. Central Time, July 15, 2026, electronically via email to soprocurement@tamus.edu with the subject line of “FPC-26- 269 – Construction Materials Testing Services”. The sent time indicated within the A&M System email server shall be used for the receipt and acceptance of the response. Late submittals will not be considered under any circumstances.

Submittal Format: Submission shall be saved as two (2) separate files in Adobe Portable Document Format (PDF) according to the items listed below and named as such; I) “company name – Qualification Statement”, II) “company name – Forms”.

2.5 Submittal Components

The following documents are to be returned as part of the Respondence’s qualification submittal.

Failure to include these sections/documents may be basis for response disqualification.

I. Qualification Statement

Cover Letter

Table of Contents

Statement of Qualifications (Section 4)

Service Location Matrix (Exhibit C)

II. Forms

Signed Execution of Offer (Exhibit A)

Signed and notarized Non-Collusion Affidavit (Exhibit B)

VetHUB Subcontracting Plan (Section 3.4)

Other Requirements:

• Qualification Statement shall be a MAXIMUM of twenty-five (25) pages. The cover letter, table of contents, divider pages, and the Exhibits do not count toward this maximum page count.

• Additional attachments shall NOT be included with the Qualification Statement. Only the responses provided by the Respondent to the questions identified in Section 4 of this RFQ will be used by the A&M System for evaluation.

• Submittals shall include a “Table of Contents” and give page numbers for each part of the Qualifications.

• Number all pages of the submittal sequentially using Arabic numerals (1, 2, 3, etc.).

Qualification Statement shall consist of answers to questions identified in Section 4 of the RFQ. It is not necessary to repeat the question in the Qualifications; however, it is essential to reference the question number with the corresponding answer.

Failure to comply with all requirements contained in this Request for Qualifications may result in the rejection of the submittal.

Note: Additional information regarding the Execution of Offer and Non-Collusion Affidavit.

mailto:soprocurement@tamus.edu

The Texas A&M University System RFQ-01-FPC-26-269 Page 7 of 37

• Execution of Offer: The signature in the Execution of Offer within the electronic copy shall serve as the official signature of record. Signature can be done electronically with DocuSign, Adobe or another similar tool.

• Non-Collusion Affidavit: The Respondent signature on this document may be done electronically with DocuSign, Adobe or another similar tool. An agreement may not be executed with an awarded Respondent until this document is fully signed and notarized.

2.6 Inquiries and Interpretations

All questions concerning this RFQ are to be directed to Jeff Zimmermann, Executive Director of Procurement & Business Services, in writing at soprocurement@tamus.edu. Respondent may not contact other individuals at A&M System to discuss any aspect of this RFQ, unless expressly authorized by the A&M System Procurement Office to do so.

Questions regarding the RFQ, including questions for more data or information beyond that included in this RFQ and any attachment(s), should be presented in writing. Deadline for submission of questions is July 2, 2026. The A&M System will publish all questions with responses according to the schedule in Section 2.2.

Responses to inquiries which directly effect an interpretation or change to this RFQ will be issued in writing by addendum/amendment and posted to the Electronic State Business Daily (ESBD) at the following site; https://www.txsmartbuy.gov/esbd according to the schedule in Section 2.2 above.

Within the ESBD search, input Agency Number “710” and select “Posted” for the Status.

It is the responsibility of all REPONDENTS to check the ESBD for any and all addenda issued for this RFQ. All such addenda/amendments issued by A&M System prior to the time that qualifications are received shall be considered part of the RFQ, and the Respondent shall consider and acknowledge receipt of such in the Execution of Offer. Only those A&M System replied to inquiries which are made by formal written addenda/amendments shall be binding. Oral and other interpretations or clarification will be without legal effect.

2.7 Selection Process

It is the intention of the A&M System to utilize the information received from Respondents qualification submissions to award and form a pool of pre-qualified companies from which it may select to assist the A&M System on an as-needed basis. Each project assignment will be documented individually and will extend for as long as agreed to by the parties. A&M System will base its choice on demonstrated competence, knowledge, and qualifications of the Respondent.

The Respondent(s) selected will be the one who’s experience and qualifications, as presented in response to this RFQ, establish them, in the opinion of A&M System, as well qualified and offering the greatest benefits, experience and value to A&M System, and any other relevant factor that A&M System deems relevant and would consider in selecting a RESPONDENT for award. If other considerations are equal, the A&M System may give preference to a Respondent whose principal place of business is in the state of Texas, or who will manage the contract wholly from an office in the state of Texas. Final determination for award of any resultant Agreement will be made on the overall best value to the A&M System. The A&M System may cancel this RFQ or reject Qualifications at any time prior to an award and is not required to furnish a statement of the reasons why a particular qualification was not deemed to be the most advantageous.

The A&M System, at its sole discretion, may select as many companies as deemed to be in A&M System’s best interest to meet the needs throughout The Texas A&M University System. All Respondents selected will be required to sign a master agreement. The master agreement does not guarantee that a project(s) assignment will be made. Should A&M System determine in its sole discretion that only one Respondent is fully qualified, or that one Respondent is clearly more highly qualified than the others under consideration, an agreement may be negotiated and awarded to that mailto:soprocurement@tamus.edu https://www.txsmartbuy.gov/esbd?page=1&agencyNumber=710

The Texas A&M University System RFQ-01-FPC-26-269 Page 8 of 37

Respondent. The award document will be an agreement incorporating by reference all the requirements, terms and conditions of the RFQ and the Respondent’s qualification as negotiated.

Submission of qualifications indicates Respondent's acceptance of the evaluation techniques and the recognition that subjective judgments must be made by A&M System during the evaluation process.

It is the intent of the A&M System to qualify multiple submissions. The selection of the successful submission(s) may be made by the A&M System on the basis of the submissions initially submitted, without discussion, clarification, or modification. In the alternative, selection of the successful submission(s) may be made by the A&M System on the basis of negotiation with any of the Respondents. The A&M System shall not disclose any information derived from the submissions provided by competing Respondents in conducting such discussions.

All submissions must be complete and convey all the information requested to be considered responsive. If a submission fails to conform to the essential requirements of the RFQ, A&M System alone will determine whether the variance is significant enough to consider the submission susceptible to being made acceptable, and therefore a candidate for further consideration, or not susceptible and therefore not considered for award.

The A&M System may perform reference checks and seek further information, as needed from all Respondents whose submission the A&M System, at its discretion, considers viable, based on the initial evaluation and ranking. The Respondent’s response to this requirement officially authorizes the A&M System to contact these organizations to discuss the services and other considerations which the Respondent has provided to such organizations and authorizes the organizations to provide such information to the A&M System and Respondent shall and hereby does release and hold harmless the A&M System, the state of Texas, and the organization of any and all liability whatsoever, in connection with providing and receiving all such information. Any negative responses received from reference checks may be grounds for disqualification of the submission.

The A&M System reserves the right to accept or reject any or all offers, to waive informalities and technicalities, to accept qualifications considered most advantageous, and/or to make the award to the most responsive Respondent(s).

The Texas A&M University System RFQ-01-FPC-26-269 Page 9 of 37

SECTION 3

SCOPE OF WORK

3.1 Goal

The A&M System is soliciting Statements of Qualifications from Respondents with an established history of expertise and qualifications for Construction Materials Testing (CMT) services. It is the intent of the A&M System to contract with multiple Respondents to provide a pool of companies that can provide these services for all FP&C managed construction projects. Other A&M System Members may elect to utilize this pool for work or projects managed by them at their respective institution.

The services to be provided may include assistance with capital projects for the A&M System and its Members. As such, these projects must be in conformance with the A&M System policies and regulatory and statutory requirements for State of Texas public higher education facility projects.

Demonstrated past experience with State of Texas public higher education facility projects will be given strong consideration in the evaluation process.

3.2 Services Required

The required services of a Respondent chosen for a particular project shall consist of working under the direct supervision of the A&M System’s staff (Owner).

The selected Respondents will be responsible for providing all necessary equipment including but not limited to computers, software, cameras, and cell phones as part of their overhead and without separate reimbursement. Activities for which CMT services may be requested include any or all of the following:

(a) Attend pre-construction conferences as requested.

(b) Be able to perform standard material tests, including the following at a minimum:

• Concrete cylinder compression test (ASTM C31 & C39) including slump, temperature, unit weight, and air content (ASTM C143, C172, C231/C173, C1064)

• Review and evaluate mix designs

• Determining Floor Flatness and Floor Levelness (ASTM E1155)

• Cement mortar compression test (ASTM C109)

• Classification of Soils for Engineering Purposes (ASTM D2487)

• Sieve analysis (ASTM C136 & C117)

• Atterberg limits (ASTM D4318)

• Sulfate content (Tex-145-E)

• Proctors (ASTM D698, D1557, Tex-113-E, Tex-114-E)

• Wet ball mill (Tex-116-E)

• Triaxial (Tex-117-E)

• Lime series PI and Ph methods (Tex-112-E and ASTM D6276)

• In-place density/moisture (ASTM D2938)

• Hot Mix Asphaltic Concrete (HMAC) density, stability, and asphalt content (ASTM D2950, D2041, D2726, D5444)

• Non-destructive testing of structural welds

(c) Be able to perform the following observations, as a minimum:

• Visual comparisons of footing sub grades to verify design bearing capacities, including applicable reports

• Visual witnessing of piers and piles, including applicable reports.

The Texas A&M University System RFQ-01-FPC-26-269 Page 10 of 37

• Visual observation of structural welds, including reports.

(d) Be able to perform the following inspections, at a minimum:

• Structural steel welds.

• Structural special inspections.

• Provide both typed reports and/or test results in digital PDF form via email.

• Use the A&M System’s Project Management Information System (PMIS).

(e) Provide material, observation, and inspection reports within 48 hours of test or site visit to the Owner, Architect, Engineer, and the General Contractor in PDF format. If required by project, provide reports to PMIS.

(f) When work is found to be in non-conformance, document the deficiencies and promptly provide notification of the deficiencies to the Owner, Architect, Engineer, and the General Contractor prior to leaving the site. Include tracking of deficiencies in reports.

(g) All services shall be under the direction of a Texas Registered Professional Engineer.

(h) Provide and use proper personal protective equipment (safety harness, vest, etc.) and tools to accomplish testing, observations, and inspections.

(i) Notify the Owner’s field project manager prior to visit if ladders, lifts, or other equipment will be needed to perform inspection/ testing. Directly notify the General Contractor the date and time of the inspection/testing so the subcontractors can make the site available.

The A&M System reserves the right on each assignment to authorize all or any part of the above subject areas and/or work tasks as the A&M System deems necessary for the individual project.

Items to Note:

• If any of the services required in this RFQ, with considerations noted below, cannot be accomplished by one prime firm (Respondent), the balance of work is to be subcontracted and the Respondent is to follow the process in Section 3.4. For any given project one prime firm or one prime firm with subcontractors will need to provide all of the requested services.

• The scope to be performed will be set forth in each project authorization and be based on established normalized unit rates and a proposal of units from the Respondent for the particular assignment. A purchase order will prescribe a scope of work with a not-to-exceed fee for each assignment.

• CMT services required by A&M System members will vary and will be determined on a project- by-project basis.

• Trimble Unity Construct (eBuilder) is the PMIS and the selected Respondent may be expected to minimally utilize this web based program. If requested to utilize this system, access will be provided at no cost to the Respondent. Training in College Station (or virtually) will also be provided at no additional cost.

3.3 Project Assignments

Construction Material Testing services will be assigned when required to a project or projects from the pool of Respondents established by this RFQ. Note that inclusion in the pool is not a guarantee of work or project assignments. Below are some of the factors considered by FP&C regarding assignment of a project or projects.

• Location of Respondent in relation to the project(s)

• Budget considerations

• Work distribution within the pool as practical

• Other factors as determined by FP&C for a specific project assignment

The Texas A&M University System RFQ-01-FPC-26-269 Page 11 of 37

The A&M System reserves the right on each assignment to authorize all or any part of the above subject areas and/or work tasks as the A&M System deems necessary for the individual project. The scope to be performed will be set forth in each work authorization and be based on established unit rates and a proposal of units from the Respondent for the particular assignment. A purchase order will be issued with a not-to-exceed fee for each assignment.

Depending on the scope and cost of the project, the awarded Respondent may be required to provide insurance.

3.4 Subcontracting Plan Requirements

The Veteran Heroes United in Business program (VetHUB or HUB) as part of the state of Texas Comptroller’s Statewide Procurement Division focuses on certification of service-disabled veterans (SDV) to facilitate their growth and development and increase opportunities for contracts and subcontracts with the state of Texas. For additional information on the VetHUB program visit the following site:

https://comptroller.texas.gov/purchasing/vendor/hub/hub-faq.php.

The A&M System requires a state of Texas Subcontracting Plan (SP) for contracts of $100,000 or more over the life of the contract (including any renewals), where such opportunities exist. The total expected value of this solicitation and subsequent contract is $100,000 or more and therefore, Respondents to this RFQ are required to develop and submit a completed Subcontracting Plan form with their proposal submission. (Texas Government Code Chapter 2161, Subchapter F; 34 Texas Administrative Code Section 20.285)

A subcontracting opportunity is defined as any portion or lot of work that the Respondent cannot complete with its own equipment, supplies, materials, and/or employees. The Respondents will use the procedures prescribed below when completing the SP form.

The Respondent shall use the CMBL/VetHUB directory published on the comptroller’s website to identify VetHUBs. If the Respondent uses any alternate source, it accepts the risk that its HUB subcontracting plan may be noncompliant due to inaccurate HUB certification information. A business listed in the VetHUB directory at the time of the good faith effort is considered a HUB for purposes of evaluating a HUB subcontracting plan, even if the business later graduates or has its HUB status revoked or expired. The VetHUB directory can be accessed via the following site:

https://mycpa.cpa.state.tx.us/tpasscmblsearch/index.jsp

The A&M System VetHUB Program Office will review the information and documentation submitted and use it as a basis to determine if the plan was developed in good faith effort by the Respondent to utilize VetHUB subcontractors and/or suppliers on this project. The A&M System may reject a SP that was not developed in good faith or was not completed. The A&M System shall document the reasons for rejection in the contract file. If the A&M System finds that businesses identified in a SP are no longer HUBs, it may invite the vendor to submit a revised plan that identifies active VetHUBs.

An accepted SP form will become a part of any contract with the Respondent resulting from this solicitation. Any revisions to the SP must be approved by the A&M System VetHUB Program Office.

Procedures for Completing the SP Form

The A&M System requires the Respondent to submit an SP form for this RFQ. The SP form must include all subconsultants, suppliers, subcontractors, and vendors intended to be included in the Respondent’s team. The A&M System has set a VetHUB goal of 2% for this solicitation. Refer to Attachment A for additional information and instructions.

In accordance with 34 TAC §20.285 the Respondent must demonstrate its good faith development of a subcontracting plan by either inviting small businesses to bid for subcontracts (the solicitation https://comptroller.texas.gov/purchasing/vendor/hub/hub-faq.php https://mycpa.cpa.state.tx.us/tpasscmblsearch/index.jsp https://texas-sos.appianportalsgov.com/rules-and-meetings?$locale=en_US&interface=VIEW_TAC_SUMMARY&queryAsDate=05%2F12%2F2026&recordId=228524

The Texas A&M University System RFQ-01-FPC-26-269 Page 12 of 37 method) or stating that it does not intend to subcontract (the self-performing method). These two methods are further described within the SP form.

The SP form to be used is located at the following site:

https://comptroller.texas.gov/purchasing/vendor/hub/forms.php

For more information or assistance in properly completing the SP form for this RFQ, the Respondent may contact the A&M System at SO-HUBProgram@tamus.edu. Each Respondent is encouraged to submit a draft of their SP form prior to submitting their response to the RFQ for review by the A&M System. To permit adequate time for the performance of the required good faith effort, we request that all drafts be submitted at least ten (10) business days prior to the RFQ due date.

AWARDED RESPONDENT REQUIREMENTS

If the Respondent is selected and awarded a project in connection with this RFQ, the Respondent will be required to comply with all good faith effort requirements. The Respondent may be required to complete a separate project-specific HSP form which identifies the subcontracting opportunities anticipated for the scope of work defined in that agreement and subcontractors anticipated to perform each subcontracting opportunity. If required, these will be due prior to beginning performance on the scope of work.

The HSP form submitted with the proposal response will be included within the Agreement and the A&M System will monitor compliance and progress with all requirements. Per Texas Government Code 2161.253(d), if a determination is made that the Vendor failed to implement the plan in good faith, the A&M System, in addition to any other remedies, may bar the Vendor from further contracting opportunities with the A&M System.

https://comptroller.texas.gov/purchasing/vendor/hub/forms.php mailto:SO-HUBProgram@tamus.edu

The Texas A&M University System RFQ-01-FPC-26-269 Page 13 of 37

SECTION 4

STATEMENT OF QUALIFICATIONS

4.1 Statement of Qualifications

RESPONDENTS SHALL CAREFULLY READ THE INFORMATION CONTAINED IN THE FOLLOWING

CRITERIA AND SUBMIT A COMPLETE STATEMENT OF QUALIFICATIONS TO ALL ITEMS. RESPONSE

SHALL BE FORMATTED AS DIRECTED. INCOMPLETE QUALIFICATIONS MAY BE CONSIDERED NON-

RESPONSIVE AND SUBJECT TO REJECTION.

4.1.1 CRITERION ONE: RESPONDENT’S STATEMENT OF QUALIFICATIONS AND AVAILABILITY TO

UNDERTAKE THE SERVICES

(a) Provide a statement of interest including a narrative describing the Respondent’s and subconsultant’s qualifications and availability.

(b) Provide a statement detailing the specific qualifications, availability, and commitment of the Respondent and subconsultants, including named assigned personnel, to successfully undertake, manage, and perform the services listed within Section 3 above. Proof of qualifications shall be provided by certifications, licenses, or other documentation in a separate tab which does not count towards the maximum number of pages allowed.

(c) Provide a statement detailing how the Respondent and subconsultants follow and meet the requirements of ASTM E329 “Standard Specification for Agencies Engaged in Construction Inspection, Testing, or Special Inspection” and the requirement of ASTM E543 “Standard Specification for Agencies Performing Nondestructive Testing”.

(d) List the primary ACI certified personnel that would monitor concrete.

(e) List the primary inspectors performing structural steel inspections who are currently certified AWS Certified Welding Inspectors (CWI)

(f) List the primary inspectors performing structural special inspections who are currently certified through the International Code Council or by another nationally recognized certification program.

(g) Provide copies of reports from inspections of facilities made during most recent inspections. Include memorandum of remedies for deficiencies reported by this inspection.

(h) Testing Equipment must be calibrated at required and reasonable intervals by devices of accuracy traceable to either an accrediating body or accepted values of natural physical constants. Provide a statement that equipment will be kept calibrated, in good working order, and all required certificates/regulatory documents will be on file. Provide certificates/regulatory documents via an Excel spreadsheet, link or PDF copies in a separate tab which does not count towards the maximum number of pages allowed.

(i) Provide a resume for key personnel for Respondent who will be assigned to provide services from all office locations. Limit resumes to one (1) page per person. Provide copies of any key personnel licenses and certifications. Licenses and certifications of other personnel who will be directly responsible for testing on a project may be included with the proposal for a specific project.

(j) Identify the single point of contact for the term of this agreement and include phone number, email, and mailing address. This person will be assigned to provide proposals to the A&M System and manage the master agreement.

(k) The Respondent shall have a Texas Registered Professional Engineer with at least five years of experience in providing CMT services as part of their team. All services shall be

The Texas A&M University System RFQ-01-FPC-26-269 Page 14 of 37 under the direction of the Engineer charged with managerial responsibility. Provide the Texas PE registration(s).

(l) Complete Exhibit C to indicate interest and ability to provide services at each of the spedified Member lcoations. Provide which single office will service each location.

4.1.2 CRITERION TWO: COMPANY PROFILE AND BACKGROUND

(a) Provide a brief history of the firm including all office location(s), legal status, and officers.

(b) Provide the Respondent’s organization chart to demonstrate how project personnel will be organized to fulfill requirements under this agreement.

(c) Is the Respondent currently for sale or involved in any transaction to expand or to become acuired by another business entity? If yes, please explain the impact both in organizational and directional terms.

(d) Provide any details of all past or pending litigation or claims filed against the Respondent that would affect the Respondent’s performance under this agreement with the A&M System.

(e) Is the Respondent currently in default on any loan agreement or financing agreement with any bank, financial institution, or other entity? If yes, specify date(s), details, circumstances, and prospects for resolution.

(f) Does any relationship exist by relation, business association, capital funding agreement, or any other such kinship between the Respondent and any A&M System employee, officer, or Regent? If so, please explain.

4.1.3 CRITERION THREE: RESPONDENT’S PERFORMANCE ON PAST REPRESENTATIVE PROJECTS

List no more than three (3) examples of relevant, previous projects undertaken by the Respondent that best demonstrates the Respondent’s capacity and expertise to fulfill the requirements of the stated services. Each example should be well organized, and, when applicable, identify key personnel proposed for the A&M System agreement who worked on the example project. List the projects in order of priority, with the most relevant project listed first. Provide the following information for each project listed:

(a) Project name, location, and description.

(b) Final Project size in gross square feet.

(c) Type of construction (new, renovation, or expansion).

(d) Actual start and finish dates for construction.

(e) Description of services the Respondent provided for the project and office location.

(f) Key subcontractors, if used.

(g) The name of the owner’s representative(s) who would be most familiar with the project and contact information including telephone number and email address.

References shall be considered relevant based on specific project participation and experience with the Respondent. The A&M System may contact the references provided or any other references deemed relevant at any time during this RFQ process.

Note: Examples that involve public higher education institutions are preferred. Past experience in the state of Texas and demonstrated knowledge and understanding of Texas markets is also preferred. Demonstrated experience with a variety of building and construction types and with campuses in various stages of development is also useful.

The Texas A&M University System RFQ-01-FPC-26-269 Page 15 of 37

SECTION 5

GENERAL TERMS AND CONDITIONS

A. TERMS AND CONDITIONS: The A&M System reserves the right to accept, reject, modify, and/or negotiate any and all submittals received in conjunction with this RFQ. It reserves the right to waive any defect or informality in the submittals on the basis of what it considers to be in its best interests. Any submittal which the A&M System determines to be incomplete, conditional, obscure, or which has irregularities of any kind, may be rejected. The A&M System reserves the right to award to the company, or companies, which in our sole judgment, will best serve our long-term interest.

This RFQ in no manner obligates the A&M System to the eventual purchase of any products or services described, implied, or which may be proposed, until confirmed by written agreement, and may be terminated by the A&M System without penalty or obligation at any time prior to the signing of a contract.

The Respondent must include a formal copy of any Respondent terms and conditions applicable to this transaction. Evaluation and acceptance and/or modification of these terms and conditions by the A&M System Office of General Counsel are essential prior to execution of any resultant agreement. In the event the Respondent does not supply terms and conditions with their submittal, A&M System terms and conditions will govern this transaction.

B. GOVERNING LAW: Respondent agrees that, in the event of a dispute, laws of the State of Texas will prevail.

C. NON-DISCRIMINATION: The parties agree that in the performance of any contract they shall not discriminate in any manner on the basis of race, color, national origin, age, religion, sex, genetic information, veteran status or disability protected by law. Such action shall include, but is not limited to, the following: employment, upgrading, demotion, transfer, recruitment or recruitment advertising; layoff or termination; rates of pay or other forms of compensation. By submitting a submittal, Respondent certifies that it will conform to the provisions of the federal Civil Rights Act of 1964, as amended.

D. CIVIL RIGHTS REQUIREMENTS: All Respondents must comply with applicable civil rights laws.

E. IMMIGRATION REFORM AND CONTROL ACT OF 1986: By submitting a proposal, the Respondent certifies that it does not, and will not, during the performance of any resultant Agreement, employ illegal alien workers or otherwise violate the provisions of the federal Immigration Reform and Control Act of 1986, as amended.

F. DEBARMENT STATUS: By submitting a proposal, Respondent certifies that it is not currently debarred from submitting submittals on contracts nor is it an agent of any person or entity that is currently debarred from submitting bids on contracts.

G. PUBLIC INFORMATION: Respondent is hereby notified that the A&M System strictly adheres to all statutes, court decisions, and the opinions of the Texas Attorney General with respect to disclosure of public information. The A&M System may seek to protect from disclosure all information submitted in response to this RFQ until such time as the resultant Agreement is executed. Upon execution of the resultant Agreement, the A&M System will consider all information, documentation, and other materials requested to be submitted in response to this RFQ to be of a non-confidential and non-proprietary nature and therefore subject to public disclosure under the Texas Public Information Act, Texas Government Code, Chapter 552.

Respondent will be advised of a request for public information that implicates its materials and will have the opportunity to raise any objections to disclosure to the Texas Attorney General.

H. ALTERNATE PROPOSALS: A&M System reserves the right to consider alternate proposals submitted by Respondents. Alternate proposals shall be clearly marked “Alternate” with the

The Texas A&M University System RFQ-01-FPC-26-269 Page 16 of 37 proposed alternates clearly defined and all pricing/cost advantages included, if applicable.

I. ANTITRUST: Respondent hereby assigns to the A&M System, any and all claims for overcharges associated with any contract resulting from this RFQ which arise under the antitrust laws of the United States 15 U.S.C.A. Section 1, et seq. (1973) and which arise under the antitrust laws of the State of Texas, Texas Business and Commercial Code Ann. Sec. 15.01, et seq. (1967).

J. EXECUTIVE HEAD OF A STATE AGENCY AFFIRMATION: In accordance with Section 669.003 of the Texas Government Code, relating to contracting with the executive head of a state agency, Respondent certifies that it is not (1) the executive head of the A&M System or any of its Members, (2) a person who at any time during the four years before the date of the contract was the executive head of the A&M System or any of its Members, or (3) a person who employs a current or former executive head of the A&M System or any of its Members.

K. EXECUTIVE ORDER GA-48 CERTIFICATION: Respondent certifies that pursuant to Executive Order GA-48, Hardening of State Government, Respondent is not and, if applicable, none of its holding companies or subsidiaries are a) listed in Section 889 of the 2019 National Defense Authorization Act (“NDAA”) regarding telecommunications and video surveillance; b) listed in Section 1260H of the 2021 NDAA regarding Chinese military companies in the US; c) owned by the government of a country on the U.S. Department of Commerce's foreign adversaries list under 15 C.F.R. § 791.4 (“15 C.F.R. § 791.4 List”); or d) controlled by any governing or regulatory body located in a country on the 15 C.F.R. § 791.4 List. Respondent acknowledges that a false certification is grounds for immediate termination of any resulting contract or purchase order with no further obligation on the part of A&M System.

L. INSURANCE: Respondent shall obtain and maintain, for the duration of any resultant Agreement or longer, the minimum insurance coverage set forth on Exhibit D attached hereto.

M. REQUIRED CONTRACT TERMS: The terms and conditions contained in the draft agreement attached as Exhibit D or, in the sole discretion of the A&M System, terms and conditions substantially similar to those contained in the attached agreement, will constitute and govern any Agreement that results from this RFQ. If Respondent takes exception to any terms or conditions set forth in the attached agreement, Respondent will submit a list of the exceptions as part of its proposal. Respondent’s exceptions will be reviewed by the A&M System and may result in disqualification of Respondent’s proposal as non-responsive to this RFQ. If Respondent’s exceptions do not result in disqualification of Respondent’s proposal, then the A&M System may consider Respondent’s exceptions when the A&M System evaluates the Respondent’s proposal.

The Texas A&M University System RFQ-01-FPC-26-269 Page 17 of 37

EXHIBIT A

EXECUTION OF OFFER

RFQ01-FPC-26-269

In compliance with this RFQ, and subject to all the conditions herein, the undersigned offers and agrees to furnish any or all commodities or services at the prices quoted.

A.1 Respondent Affirmation

NOTE TO RESPONDENTS: SUBMIT ENTIRE SECTION WITH RESPONSE.

This execution of offer must be completed, signed, and returned with the Respondent's Proposal.

Failure to complete, sign and return this execution of offer with the Proposal may result in rejection of the Proposal.

Signing a false statement may void the submitted Proposal or any agreements or other contractual arrangements, which may result from the submission of Respondent’s Proposal. A false certification shall be deemed a material breach of contract and, at the A&M System's option, may result in termination of any resulting contract or purchase order.

Addenda Acknowledgment:

Receipt is hereby acknowledged of the following addenda to this RFQ by entering yes or no in space provided and indicating date acquired. Enter “0" if none received.

No. 1 ______ Date No. 3 ______ Date

No. 2 ______ Date No. 4 ______ Date

A.2 Signature

By signing below, the Respondent hereby certifies as follows, and acknowledges that such certifications will be included in any resulting contract:

(i) the Response and all statements and information prepared and submitted in response to this RFQ are current, complete, true and correct;

(ii) it is not given, nor intends to give at any time hereafter, any economic opportunity, future employment, gift, loan, gratuity, special discount trip, favor or service to a public servant in connection with the submitted response or any subsequent proposal. Failure to sign below, or signing a false statement, may void the response or any resulting contracts at the A&M System’ option, and the Respondent may be removed from all future proposal lists at this state agency;

(iii) the individual signing this document and the documents made part of the RFQ is authorized to sign such documents on behalf of the Respondent and to bind the Respondent under any contract which may result from the submission of the Response;

(iv) no relationship, whether as a relative, business associate, by capital funding agreement or by any other such kinship exists between Respondent and an employee of the A&M System;

(v) Respondent has not been an employee of the A&M System within the immediate twelve

(12) months prior to the RFQ response;

(vi) no compensation has been received for participation in the preparation of this RFQ (ref.

Section 2155.004 Texas Government Code);

(vii) all services to be provided in response to this RFQ will meet or exceed the safety standards established and promulgated under the Federal Occupational Safety and Health law (Public

The Texas A&M University System RFQ-01-FPC-26-269 Page 18 of 37

Law 91-596) and its regulations in effect as of the date of this solicitation;

(viii) Respondent complies with all federal laws and regulations pertaining to Equal Employment

Opportunities;

(ix) to the best of its knowledge, no member of the Board of Regents of The Texas A&M

University System, or the Executive Officers of the Texas A&M University System or its member institutions or agencies, has a financial interest, directly or indirectly, in the Solution;

(x) each individual or business entity proposed by Respondent as a member of its team that will engage in the practice of engineering or architecture will be selected based on demonstrated competence and qualifications only;

(xi) if the Respondent is subject to the Texas franchise tax, it is not currently delinquent in the payment of any franchise tax due under Chapter 171, Texas Tax Code, or is exempt from the payment of such taxes. A false certification may result in the Respondent’s disqualification;

(xii) under Section 231.006, Family Code, the Respondent or applicant certifies that the individual or business entity named in this RFQ, bid, or application is not ineligible to receive the specified grant, loan, or payment and acknowledges that any resultant agreement may be terminated and payment may be withheld if this certification is inaccurate; and,

(xiii) under Section 2155.006, Government Code, the Respondent certifies that the individual or business entity named in this bid or contract is not ineligible to receive the specified contract and acknowledges that any resultant agreement may be terminated and payment withheld if this certification is inaccurate.

(xiv) under Section 2155.0061, Texas Government Code, the Respondent certifies that the individual or business entity named in this Agreement is not ineligible to receive the specified contract and acknowledges that this Agreement may be terminated and payment withheld if this certification is inaccurate.

(xv) Respondent warrants, represents, covenants, and agrees that it is duly organized, validly existing and in good standing under the laws of the state of its incorporation or organization and is duly authorized and in good standing to conduct business in the State of Texas, that it has all necessary power and has received all necessary approvals to execute and deliver this RFQ and any contract which may result from the submission of the Response.

Respondent shall provide their Federal Employer Identification Number (“EIN”), full vendor name, address and contact information as requested in the spaces below. Failure to manually sign or with electronic signature (e.g., DocuSign or Adobe Sign) in the Authorized Signature line below will disqualify the proposal response. The person signing shall show title or authority to bind his/her firm into a contractual relationship.

Federal EIN/Taxpayer ID #: ____________________________________________________

Vendor/Company Name: ______________________________________________________

Authorized Signature:…