DPW063113P-PLANS_DRAWINGS-14 APRIL 2023-B272 REPAIR FLOOR TILE BY REPLACEMENT.pdf

DESIGNED

CHIEF, ENGINEERING DIVISION

DATE

APPROVED

RECOMMENDED

BRANCH CHIEF

SUBMITTED

PROJECT MANAGER

CHECKED

DRAWN BY

NO. DATE

DRAWING NUMBER

SCALE

SHEET OF

SHEET

DESCRIPTION

REVISIONS

APPROVEDBY

SHEET SIZE

X/X"=1'-0"

WHITE SANDS MISSILE RANGE, NEW MEXICO

DIRECTORATE OF PUBLIC WORKS

ENGINEERING SERVICES DIVISION

DRAWING TITLE

WS-272-2023-G-000-01

B272 REPAIR FLOOR TILE

BY REPLACEMENT

COVER/INDEX SHEET

10/14/23

TS

DAVID GARCIA

JAMES NUNEZ

JOHN MORGAN

B272 REPAIR FLOOR TILE BY REPLACEMENT

0%

DESIG

N

DRAWING # TITLE

WS-272-2023-G-000-01 COVER SHEET/INDEX

WS-272-2023-G-100-02 PROJECT LOCATION

WS-272-2023-D-100-03 BLDG. 272 DEMOLITION FLOORING PLAN

WS-272-2023-A-100-04 BLDG. 272 NEW FLOORING PLAN

IS

SUED F

OR

CONSTRUCTIO

N

BUILDING 272

CANTONMENT AREA

PICATINNY

LAS CRUCES GATE ENTRANCE

H

EAD

Q U

AR

TER

S AVEN

U

E O

W

EN

S R O

AD

(R

O U

TE 1)

BUILDING 272

CANTONMENT AREA

ROCK ISLAND

PICATINNY

AE

R

O

BE

E

TH

O

R

H

EAD

Q U

AR

TER

S AVE.

BUILDING 272 PROJECT LOCATION

NTS

DESIGNED

CHIEF, ENGINEERING DIVISION

DATE

APPROVED

RECOMMENDED

BRANCH CHIEF

SUBMITTED

PROJECT MANAGER

CHECKED

DRAWN BY

NO. DATE

DRAWING NUMBER

SCALE

SHEET OF

SHEET

DESCRIPTION

REVISIONS

APPROVEDBY

SHEET SIZE

X/X"=1'-0"

WHITE SANDS MISSILE RANGE, NEW MEXICO

DIRECTORATE OF PUBLIC WORKS

ENGINEERING SERVICES DIVISION

DRAWING TITLE

WS-272-2023-G-100-02

B272 REPAIR FLOOR TILE

BY REPLACEMENT

PROJECT LOCATION

10/14/23

TS

DAVID GARCIA

JAMES NUNEZ

JOHN MORGAN

Ù

Ø

Ú

0%

DESIG

N

PROJECT LOCATION IS

APPROXIMATELY 1/2 MILE

FROM WSMR

CANTONMENT AREA

STAGING

AREA

BLDG. 272

CUTTING AREAS SHALL BE

APPROVED BY COR BEFORE

CONSTRUCTION STARTS.

CONTRACTOR SHALL WORK

ONLY ON THE WEEK DAYS

FROM 1900 TO 0600 HOURS,

AND AT WEEKENDS DURING

REGULAR HOURS (SEE SOW).

IS

SUED F

OR

BLDG. 272 DEMOLITION FLOORING PLAN

SCALE: 3/32" = 1'-0"

DESIGNED

CHIEF, ENGINEERING DIVISION

DATE

APPROVED

RECOMMENDED

BRANCH CHIEF

SUBMITTED

PROJECT MANAGER

CHECKED

DRAWN BY

NO. DATE

DRAWING NUMBER

SCALE

SHEET OF

SHEET

DESCRIPTION

REVISIONS

APPROVEDBY

SHEET SIZE

X/X"=1'-0"

WHITE SANDS MISSILE RANGE, NEW MEXICO

DIRECTORATE OF PUBLIC WORKS

ENGINEERING SERVICES DIVISION

DRAWING TITLE

10/14/23

TS

DAVID GARCIA

JAMES NUNEZ

JOHN MORGAN WS-272-2023-D-100-03

DESIG

N B272 REPAIR FLOOR TILE

BY REPLACEMENT

DEMOLITION FLOORING

PLAN

GENERAL DEMOLITION NOTES

1. CONTRACTOR SHALL TEST ALL MATERIALS TO BE DEMOLISHED AND ALL VISIBLE MATERIALS THAT WILL BE SEEN ONCE EXISTING PORCELAIN COVE BASE AND PORCELAIN FLOOR TILE ARE DEMOLISHED. TESTING SHALL BE PER SOW PART

10-HAZARDOUS BUILDING MATERIALS ABATEMENT, CONTRACTOR SHALL FOLLOW GUIDELINES.

2. THE CONTRACTOR SHALL BE RESPONSIBLE FOR ABATING ALL HAZARDOUS BUILDING MATERIALS FOUND IN THE WORK AREA. ABATEMENT OF HAZARDOUS MATERIALS (INCLUDING ASBESTOS CONTAINING MATERIAL (ACM), LEAD BASED PAINT (LBP), OR MOLD SHALL TAKE PLACE PRIOR TO PERFORMING OTHER WORK OF THIS PROJECT.

3. THE CONTRACTOR SHALL BE RESPONSIBLE TO PERFORM ABATEMENT AND DISPOSAL OF ALL HAZARDOUS BUILDING MATERIALS IN ACCORDANCE WITH ALL APPLICABLE LAWS, RULES AND REGULATIONS. THE CONTRACTOR SHALL COORDINATE WITH MR. RAY DURAN, RAYMOUND.B.DURAN.CIV@ARMY.MIL, (575) 678-4641, AT THE HAZARDOUS WASTE

MANAGEMENT CENTER FOR DISPOSAL OF ALL HAZARDOUS WASTE

4. THE CONTRACTOR SHALL NOT DAMAGE ANY FIXED PROPERTY AND PROVIDE TEMPORARY PROTECTIVE COVERS IN A MANNER ACCEPTABLE TO THE GOVERNMENT. THE CONTRACTOR PRIOR TO STARTING REMOVAL OF EXISTING PORCELAIN COVE BASE AND PORCELAIN FLOOR TILE, SHALL MOVE AND COVER ANY FIXED FURNITURE OR FIXED EQUIPMENT WITH FULL COVERS. THE CONTRACTOR SHALL COORDINATE WITH THE COR TO TAKE PICTURES OF THE

EXISTING CONDITIONS BEFORE WORK STARTS.

5. CONTRACTOR SHALL DEMOLISH EXISTING PORCELAIN COVE BASE, AND PORCELAIN FLOOR TILE IN THE DESIGNATED AREAS SHOWN IN THE DRAWINGS, WHICH INCLUDES: ADHESIVES, TRANSITION STRIPS, DOOR THRESHOLDS, EDGING TRIMS, AND ANY OTHER COMPONENTS ASSOCIATED WITH THE EXISTING TILING SYSTEMS. THE CONTRACTOR SHALL FIELD VERIFY EXISTING MATERIAL TYPES, QUANTITIES, SQUARE FOOTAGE AREAS AND ALL DIMENSIONS.

6. THE EXISTING PORCELAIN TILE COVE BASE, PORCELAIN FLOOR TILE, ETC. SHALL BE REMOVED, AND PROPERLY DISPOSED OF OFF-BASE. THE CONTRACTOR SHALL BE RESPONSIBLE FOR THE CLEANUP AND DISPOSAL OF WASTE AND DEBRIS GENERATED DURING AND AT THE COMPLETION OF THIS PROJECT. IN GENERAL, THE WASTE AND DEBRIS SHALL BE DISPOSED OF IAW ALL APPLICABLE FEDERAL, STATE, AND LOCAL LAWS AND REGULATIONS. SPECIFICALLY, THE WASTE AND DEBRIS SHALL BE DISPOSED OF IAW THE JURISDICTION HAVING AUTHORITY, INCLUDING, ANY DISPOSAL SITE OUTSIDE THE STATE OF NEW MEXICO. THE CONTRACTOR SHALL ENSURE THAT ALL WASTE AND DEBRIS IS CONTAINERIZED IAW THE U.S. DEPARTMENT OF TRANSPORTATION AND THE JURISDICTION HAVING AUTHORITY LAWS AND REGULATIONS. THE CONTRACTOR SHALL ENSURE THAT ALL WASTE IS CONTAINERIZED IN A MANNER TO PREVENT

UNCONTROLLED AND IMPROPER SPILLS, LEAKS, AND RELEASES

7. CONTRACTOR SHALL CLEAN, PREPARE, REPAIR, RESURFACE THE EXISTING CONCRETE SLAB AREAS & EXISTING WALLS SURFACE AREAS WHERE NEW MATERIALS WILL BE INSTALLED AFTER DEMOLISHING EXISTING PORCELAIN COVE BASE, AND PORCELAIN FLOOR TILE.

8. EXISTING FURNITURE WILL BE REMOVED AND RETURNED TO THE ORIGINAL POSITION BY USER. AFTER THE INSTALLATION OF THE NEW PORCELAIN TILE SYSTEM AND PORCELAIN COVE BASE. COORDINATE WITH COR AT THE

PRE-CONSTRUCTION MEETING

9. EXISTING BUILT-IN FURNITURE WILL REMAIN IN PLACE AND SHALL BE PROTECTED DURING ENTIRE CONSTRUCTION.

CONTRACTOR SHALL BE RESPONSIBLE OF ANY DAMAGES.

DEMOLITION KEYED NOTES

1. CONTRACTOR SHALL FIELD VERIFY QUANTITIES OF PORCELAIN TILE, AND PORCELAIN COVE BASE THAT ARE TO BE

DEMOLISHED.

2. NO WORK IN THIS AREA. GRAY SHADED AREA IS NOT PART OF THE SCOPE OF WORK

3. FIXED FURNITURE OR FIXED EQUIPMENT TO REMAIN IN PLACE AND TO BE PROTECTED DURING ENTIRE CONSTRUCTION

4. CONTRACTOR SHALL PROTECT ALL THE EXISTING RECESSED FLOOR BOXES (CLEAN OUTS) WHICH WILL REMAIN IN

PLACE.

5. CONTRACTOR SHALL ADJUST ALL THE HEIGHTS FOR THE EXISTING WALL VINYL CORNER GUARDS WHICH ARE LOCATED IN THE WORK AREAS TO ACCOMMODATE THE NEW PORCELAIN COVE BASE. ALSO, CONTRACTOR SHALL ADJUST ALL THE EXISTING DOORS AS REQUIRED IN ORDER TO AVOID DIRECT CONTACT WITH THE NEW PORCELAIN TILE.

IS

SUED F

OR

DESIGNED

CHIEF, ENGINEERING DIVISION

DATE

APPROVED

RECOMMENDED

BRANCH CHIEF

SUBMITTED

PROJECT MANAGER

CHECKED

DRAWN BY

NO. DATE

DRAWING NUMBER

SCALE

SHEET OF

SHEET

DESCRIPTION

REVISIONS

APPROVEDBY

SHEET SIZE

X/X"=1'-0"

WHITE SANDS MISSILE RANGE, NEW MEXICO

DIRECTORATE OF PUBLIC WORKS

ENGINEERING SERVICES DIVISION

DRAWING TITLE

10/14/23

TS

DAVID GARCIA

JAMES NUNEZ

JOHN MORGAN WS-272-2023-A-100-04

0%

DESIG

N

B272 REPAIR FLOOR TILE

BY REPLACEMENT

NEW FLOORING PLAN

BLDG. 272 NEW FLOORING PLAN

SCALE: 3/32" = 1'-0"

GENERAL NOTES

1. CONTRACTOR SHALL CLEAN AND PREPARE ALL THE CONCRETE FLOOR SURFACE AREAS TO RECEIVE THE

INSTALLATION OF THE NEW PORCELAIN TILE.

2. THE AREAS SHADED GRAY WILL REMAIN UNDISTURBED. CONTRACTOR SHALL PROTECT THESE AREAS DURING THE

ENTIRE CONSTRUCTION

3. CONTRACTOR SHALL INSTALL NEW PORCELAIN TILE SYSTEM. CONTRACTOR SHALL USE THE BASIS-OF-DESIGN FROM "DALTILE" MANUFACTURER, MODELS: "GRAVEL ROAD - SD86 & GRAVEL ROAD (XT) - SD86" IN ORDER TO COMPLY WITH

ALL THE REQUIREMENTS, (SEE SPECIFICATIONS ATTACHED TO SOW).

4. CONTRACTOR SHALL INSTALL NEW 6" HIGH X 12" WIDE PORCELAIN COVE BASE SYSTEM. CONTRACTOR SHALL USE THE BASIS-OF-DESIGN FROM "MARAZZI" MANUFACTURER, COVE BASE NUMBER P-36C9TB, & COVE BASE OUTCORNER: PC-36C9TB. COLOR: "MC51 TAUPE" IN ORDER TO COMPLY WITH ALL THE REQUIREMENTS, (SEE

SPECIFICATIONS ATTACHED TO SOW).

5. THE CONTRACTOR SHALL INSTALL NEW PORCELAIN COVE BASE AT THE SPACES WHERE THERE IS EXISTING PORCELAIN BASE TILE; PREPARE EXISTING WALL SURFACE AND INSTALL NEW PORCELAIN COVE BASE.

CONTRACTOR SHALL COORDINATE WITH DPW-COR AND SUBMIT THE NEW PORCELAIN COVE BASE FOR APPROVAL BEFORE INSTALLATION. COLORS SHALL BE SELECTED BY DPW-COR. TOP AND BOTTOM GAPS OF THE NEW COVE

BASE SHALL BE ENTIRELY SEALED INCLUDING TOP AND BOTTOM.

6. THE FINAL COLORS SELECTION FOR THE NEW PORCELAIN TILE, AND ALL ITS COMPONENTS SUCH AS GROUT, TRANSITION STRIPS, DOOR THRESHOLDS, EDGING TRIMS, BASE BOARDS, ETC. SHALL BE SELECTED AND APPROVED BY DPW AND THE FACILITY USER (COORDINATE WITH COR). THE CONTRACTOR SHALL PROVIDE A MINIMUM OF SIX (6) PHYSICAL STANDARD SIZE PORCELAIN TILE SAMPLES, BEFORE THE INSTALLATION FOR FINAL APPROVAL. (SEE

SPECIFICATIONS FOR THE SELECTED COLORS).

7. INSTALL NEW ADA COMPLIANT DOOR THRESHOLDS, TRANSITION STRIPS, EDGING TRIMS AS REQUIRED AROUND EXISTING FIXED FURNITURE AND OTHER PLACES REQUIRED TO COVER GAPS, AND ANY OTHER REQUIRED COMPONENTS ASSOCIATED WITH THE NEW PORCELAIN TILE (MATCH ALL COMPONENT ITEMS TO EXISTING). THE CONTRACTOR SHALL FIELD VERIFY THE EXISTING MATERIAL TYPES, FORMS, QUANTITIES, SQUARE FOOTAGE AREAS, AND ALL DIMENSIONS AS PER SCALED DRAWINGS.

8. PORCELAIN TILE SHALL BE FREE OF ANY DENTS OR CRACKS, AND OTHER PHYSICAL AND MANUFACTURING DEFECTS.

9. NEW VINYL/RUBBER TRANSITION STRIPS SHALL BE HEAVY-DUTY AND DESIGNED TO FIT WITH THE TYPE OF EXISTING

CARPET OR TILE ADJACENT TO THE NEW TILING.

10. PORCELAIN TILE SHALL NOT BE INSTALLED ON SURFACES THAT ARE UNSUITABLE AND WILL PREVENT A PROPER INSTALLATION. HOLES, CRACKS, DEPRESSIONS, OR ROUGH AREAS SHALL BE REPAIRED USING MATERIAL

RECOMMENDED BY THE PORCELAIN TILE THIN-SET MANUFACTURER.

11. CONTRACTOR SHALL CUT AND FIT PORCELAIN TILE, TO BUTT TIGHTLY TO VERTICAL SURFACES, PERMANENT FIXTURES, AND BUILT-IN FURNITURE INCLUDING CABINETS, PIPES, OUTLETS, EDGINGS, TRANSITION STRIPS, DOOR THRESHOLDS, WALL BASE BOARDS. BIND OR SEAL CUT EDGES AS RECOMMENDED BY THE PORCELAIN TILE

MANUFACTURERS.

12. IF THE CONTRACTOR SPILLS ANY ADHESIVE, THIN-SET, OR IN ANY WAY SOILS THE WALLS OR OTHER FURNISHINGS, OR DAMAGES ANY FURNISHINGS, THE CONTRACTOR SHALL CLEAN UP AND MAKE REPAIRS USING A SPECIALIST AT

THE CONTRACTOR'S EXPENSE.

13. FOLLOWING COMPLETION OF PORCELAIN TILE REPLACEMENT, THE CONTRACTOR SHALL REMOVE COVERS, CLEAN

THE FIXTURES WITH APPROVED METHOD.

14. THE CONTRACTOR SHALL PROVIDE TO THE GOVERNMENT COR EXTRA PORCELAIN TILE AND PORCELAIN COVE BASE COMPONENTS IN ORDER TO BE STORED BY THE USER. THE QUANTITIES FOR EACH MATERIAL SHALL BE BASED ON

10 PERCENT OF THE TOTAL SQUARE FOOTAGE OF EACH MATERIAL FOR THIS PROJECT.

15. THE CONTRACTOR SHALL INSTALL THE THRESHOLDS AT DOOR OPENINGS ACCORDING TO THE INSTRUCTIONS IN

THE SPECIFICATIONS FOR THIS PROJECT. (SEE THE SPECIFICATIONS ATTACHED TO SOW)

16. THE CONTRACTOR SHALL SUBMIT A CONSTRUCTION PHASING PLAN FOR THE DWP COR AND THE USER APPROVAL.

KEYED NOTES

1. AREAS WHERE NEW PORCELAIN FLOOR TILE & PORCELAIN COVE BASE SYSTEM WILL BE INSTALLED (SEE

SPECIFICATIONS)

2. GRAY SHADED AREA IS NOT PART OF THE SCOPE OF WORK, PROTECT DURING CONSTRUCTION

3. EXISTING CLEAN OUT RECESSED BOX. PROTECT DURING CONSTRUCTION AND ADJUST AS NEEDED TO

ACCOMMODATE NEW FLOORING SYSTEM.

4. THE NORTH SIDE OF THE FACILITY IS THE ONLY AREA ALLOWED FOR TILE CUTTING, BEFORE ANY TILE CUTTING OCCURS OUTSIDE THE FACILITY, COORDINATE WITH DPW - COR FOR THE EXACT SELECTED CUTTING AREA LOCATION. PROTECT EXISTING EXTERIOR GROUND SURFACE, BENCHES, LANDSCAPING AND ANY EXTERIOR WALLS

AT THE SELECTED CUTTING AREA DURING THE ENTIRE CONSTRUCTION .

IS

SUED F

OR