Detector Salient Characteristics.docx
DOCX document 22 KB Posted
- Solicitation number
- 36C24724Q0475
About this file
The provided document contains information about a federal contract opportunity for the replacement of a 14S detector for an AGFA DX-D100+ Mobile X-ray (XR) system. The key requirements include that the replacement detector must be an original equipment manufacturer (OEM) product, have specific physical parameters, and be compatible with the AGFA DX-D100+ system and MUSICA software. The detector must be installed, configured, and updated by an AGFA-certified technician using the TRI Panel Installation Tool and OEM-provided software and firmware.
The related federal contract opportunity is a special notice from the Department of Veterans Affairs, Network Contracting Office 07, indicating its intent to award a sole source, firm fixed price contract to AGFA for the replacement of the 14S detector. The contract is expected to be awarded under the authority of 41 U.S.C. 3304(a)(1), as implemented by FAR 13.106-1(b)(2) - Soliciting from a single source. The anticipated award date is April 1, 2024.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| SOLE SOURCE LETTER Agfa DR14S Detector.pdf | ||
| Intent to SS.pdf | ||
| Single Source Justification MPT to SAT.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
AGFA DX-D100+ Detector Salient Characteristics Introduction:
A new 14S detector for an AGFA DX-D100+ Mobile X-ray (XR) system is required to replace a damaged 14S detector. Detectors are critical to the function of XRs, as they record and provide the XR image necessary to administer patient diagnostics and patient care.
Requirements:
1. The replacement 14S detector must be OEM.
2. Physical parameters
a. Max 38.5 x 45 x 1.6cm size
b. Max 3kg weight
c. Active pixel area: 355 x 426mm
d. Cesium iodide or Gadolinium oxysulfide detector material
3. The 14S detector must be able to fully interface with AGFA’s DX-D100+ Mobile XR system and MUSICA softwares.
4. Provided 14S batteries must follow OEM requirements to ensure consistent, safe operation of the detector.
5. The 14S detector must be installed, configured, and updated by a technician trained and certified by the OEM, AGFA.
a. Configuration must be done using the TRI Panel Installation Tool
b. Detector software and firmware must be provided by the OEM.
File details come from the government source that posted it. Updated .