21._Attachment_B_-_Pilot_Butte_Construction_Drawings.pdf

28 May 2015

Attachment B

Pilot Butte Substation, Stage 04 Project Drawings

DE-SOL-0008520

PROJECT DRAWINGS

PILOT BUTTE SUBSTATION

STAGE 04

WYOMING

SECTION C

DESCRIPTION/SPECIFICATIONS

Spec. No. 853

15-1

A. GENERAL:

CONSTRUCTION STANDARD DRAWINGS: A complete set of standard drawings are available at http://www.wapa.gov/business/buys.htm. Construction drawings are the specification drawings and any additional drawings required for use in construction. The construction drawings will be issued after contract award and may include amendment changes and other details, which make the drawings suitable to use for construction purposes.

PROJECT DRAWINGS: Project drawings included herein are reduced reproductions and are not to scale.

Some project drawings show details of fabrication and other information not a part of the work. Disregard information and details, which are not applicable.

STANDARD DRAWINGS: Where details shown on standard drawings included herein differ from project drawings or text, the details of project drawings or text shall govern.

INFORMATIONAL DRAWINGS: Some project drawings have the words “FOR INFORMATION ONLY” appearing above the title block. These drawings show some information, which may be required for bidding purposes. These drawings do not show items to be furnished or work to be performed.

EXISTING INSTALLATION DRAWINGS: Some project drawings have the words “EXISTING INSTALLATION” appearing above the title block. These drawings show the existing installations prior to modifications and may show some new work to be performed.

REFERENCE DRAWINGS: Reference drawings referred to on project drawings and not included herein, are not necessary for bidding purposes.

CONTRACTOR'S RESPONSIBILITY: Check all drawings and advise Western of any errors or omissions.

B. LIST OF DRAWINGS:

LOCATION MAP:

1. PB 0015 Rev. A – Location and Vicinity Map

ELECTRICAL:

2. PB 0001-2 Rev. E EI – 115kV Area Switching Diagram (Sh. 2 of 2) (Existing Installation)

3. PB 0001-2 Rev. F – 115kV Area Switching Diagram (Sh. 2 of 2)

4. PB 1000 Rev. H EI – Arrangement Plan (Existing Installation)

5. PB 1000 Rev. I – Arrangement Plan

6. PB 1004 Rev. F EI – 115kV Arrangement Plan (Existing Installation)

7. PB 1004 Rev. G – 115kV Arrangement Plan

8. PB 1008 Rev. B EI – 115kV Bay Y7 & Capacitor Bank PY71 Sections E-E, F-F, and G-G (Existing Installation)

9. PB 1008 Rev. C – 115kV Bay Y7 & Capacitor Bank PY7A Sections E-E, F-F, and G-G

10. PB 1011 Rev. D EI – Unit Substation DWA Wiring Diagram (Existing Installation)

11. PB 1011 Rev. E – Unit Substation DWA Wiring Diagram

12. PB 1028 – Capacitor Bank PY7B Sections J-J and K-K

13. PB 1501 Rev. C EI – 115kV Area Grounding and Buried Cable Plan (Existing Installation)

14. PB 1501 Rev. D – 115kV Area Grounding and Buried Cable Plan

15. PB 1610 Rev. B – 34.5/69/115kV Yards 120/240 Volt AC Power & Lighting Wiring Diagram

FOUNDATION AND STRUCTURAL DRAWING INDEX:

16. PB 2002 Rev. D – Foundation/Structural Data and Drawing Index

SITEWORK:

17. PB 2000 Rev. B FIO – Grading Plan (For Information Only)

CONCRETE:

18. PB 2003 Rev. K EI – Foundation General Plan (Existing Installation)

19. PB 2003 Rev. L – Foundation General Plan

20. PB 2203 – Foundation Plan 115kV Area

21. PB 2300 – Foundations Outline and Reinforcement

22. PB 2301 – Foundations Outline and Reinforcement

23. PB 2550 – Anchor Bolts

STEEL STRUCTURES:

24. PB 2600 – Bus Poles

25. PB 2601 – Tee Poles

26. PB 2602 – 45 Ft. Ground Mast – Type I

27. PB 2925 – Switch Operating Platforms Steel Design and Details

CONTROLS:

28. PB T600 – Control Cable List

STRINGING REQUIREMENT:

29. PB 2048 Rev. F – Stringing Requirements

GEOLOGY:

30. PB 8000 – Log of Test Pit or Auger Hole

31. PB 8001 – Log of Test Pit or Auger Hole http://www.wapa.gov/business/buys.htm

15-2

32. PB 8002 – Log of Test Pit or Auger Hole

33. PB 8003 – Logs of Exploration http://www.wapa.gov/business/buys.htm lampman Typewritten Text

FOR INFORMATION ONLY