CrackMaster-Mastic-PL-CPT_COC__1_.pdf
PDF 93 KB Posted
- Attached to
- Competitive Selection OH|DOT10226-6
- Contract number
- DOT10226-6
- Issued by
- Ohio
About this file
This document is a Certificate of Compliance issued by P&T Products, a manufacturer of crack and joint sealants, for their CrackMaster Mastic PL - CPT product on March 27, 2025. The certificate verifies that the CrackMaster Mastic T2 meets all requirements of ASTM D 8260 Types 1 & 2 standards, as confirmed by the company's chemist, Julia Bitter.
The certificate details the technical specifications of the mastic product, including its performance characteristics when tested according to ASTM D 8260 and D 5329 standards. Key specifications include a maximum heating temperature of 400°F, application temperature range of 375-400°F, maximum heating time of 12 hours, and a specific gravity of approximately 1.8. The product demonstrates important performance metrics such as 50% minimum mastic resilience, passing tests for rapid deformation, crack bridging, mastic stability, and flexibility under various temperature conditions.
View the file
Other files
Show all 39
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Certificate of Compliance March 27, 2025
Product : CrackMaster Mastic PL - CPT
CrackMaster Mastic T2 as supplied meets all requirements of ASTM D 8260 Types 1 & 2.
The product specifications are as follows when tested in accordance with ASTM D 8260 and D
5329.
Heating Temperature 400 °F Max.
Application Temperature 375 - 400 °F
Heating Time 12 Hours Max.
Specific Gravity Approximately 1.8
Mastic Resilience 50% Min.
Effects of Rapid Deformation -18 °C / 8 N-m Impact Pass
Crack Bridging -18 °C / ⅛ inch Extension 3 Cycles Pass
Mastic Stability 70 °C 40.0 mm Max.
Flexibility 0 °C Pass
Regards, Julia Bitter
Chemist
Manufacturer of Crack and Joint Sealants
File details come from the government source that posted it. Updated .