PID.rtf

*** Product Number: 013896028 ** PID Text

O-RING

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON

REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)

RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS

(MANUFACTURERS AND NON-MANUFACTURERS)

RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL

REQUEST FOR VARIANCE (DEVIATION OR WAIVER)

RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES

"ITEMS SUPPLIED MUST BE FREE OF ASBESTOS.

LISTED CODE AND PART NUMBERS CONTAINING ASBESTOS

ARE NO LONGER ACCEPTABLE, AND ANY ALTERNATIVE

ITEM/MATERIAL MUST BE APPROVED IN ACCORDANCE

WITH CLAUSE L30 AND PROVISION 4 - CONDITIONS

FOR EVALUATION AND ACCEPTANCE OF OFFERS FOR

PART NUMBERED ITEMS."

DATA IS PROPRIETARY OR INSUFFICIENT FOR

COMPETITIVE PROCUREMENT

SAMPLING:

THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ

H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE

SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,

STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR

AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF

VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED

ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE

SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER

MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR

PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT

SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT

UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.

U S ARMY TANK AUTOMOTIVE COMMAND (19207)

P/N 12420343

TITAN WHEEL CORPORATION OF ILLINOIS (20076)

52-49610-00

CRITICAL APPLICATION ITEM

BAE SYSTEMS LAND & ARMAMENTS L.P. 076M6 P/N 12420343

BAE SYSTEMS TACTICAL VEHICLE SYSTEMS LP 0FW39 P/N 12420343

TITAN WHEEL CORPORATION OF ILLINOIS 20076 P/N 52-49610-00

TITAN WHEEL CORPORATION OF ILLINOIS 20076 P/N 52496100

HUTCHINSON INDUSTRIES, INC 62161 P/N WH0101-3

IAW REFERENCE DRAWING NR 19207 12420343

REVISION NR B DTD 05/02/2005

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12420343

REVISION NR DTD 10/10/2023

PART PIECE NUMBER: