C5_5_140R2022Q0004_Combined_Synopsis_Sol_Folsom_Dam_Pump.pdf

Combined Synopsis/Solicitation 140R2022Q0004

BUREAU OF RECLAMATION, REGION 10

SACRAMENTO, CALIFORNIA

Folsom Dam Emergency Pump, Motor & Coupling

For Central California Area Office

Contracting Office:

Bureau of Reclamation CGB Region 10

Acquisitions and Services Division Supply and Services Branch

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with FAR part 13.5 and additional information included in this notice. The Bureau of Reclamation intends to award a Firm Fixed Price Purchase Order in response to this solicitation. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2021-07.

This requirement is being solicited as 100% Open Market, no set-aside.

GENERAL INFORMATION

RFP Number: 140R2022Q0004

Request for Quotation (RFQ) Request for Proposal (RFP) Invitation for Bid (IFB)

North American Industry Classification Code (NAICS): 333996 Size Standard: 1,250 Employees

QUOTE DUE DATE, DELIVERY AND CONTACT INFORMATION

Quote Due Date:

Quote Submission:

January 14, 2022 at 3:00 PM Pacific Standard Time

By email to sheibeck@usbr.gov

Delivery Destination: Bureau of Reclamation, 7794 Folsom Dam Road, Folsom, CA 95630

Vendor’s Business Information:

Business Name: _______________________________

Agency Point of Contact: _______________________________

POC Email & Phone Number: _________________________________________

DUNS Number/Cage Code: ____________________________

Tax ID Number: _______________________________

Business Size (select one): Large Small

Please see further instructions for quote submission under Provision 52.212-1 Addendum and 52.212-2 Addendum on pages 31 and 32.

Quantity Price

Spare Motor 1

Spare Pump 1

Coupling 1

Total Cost $ -

*Includes labor, assembly, testing, delivery, and additional ancillary equipment*

STATEMENT OF WORK

Folsom Dam Spare Emergency Pump and Motor

PART 1 PROJECT CONDITIONS

1.01 BACKGROUD

A. Due to water year 2020/2021 drought conditions, it is anticipated that Reclamation will require the use of an Emergency Pump fed from Folsom Dam’s Unit 1’s penstock to supply water to San Juan Water District.

B. The U.S. Bureau of Reclamation, Central California Area Office (CCAO) requires a spare Emergency Pump and Motor to mitigate risks of motor or pump failure during pumping operations in drought conditions.

PART 2 SCOPE

2.01 REQUIREMENTS

A. Provide approval data and drawings for new spare emergency pump and motor.

B. Perform factory testing of new spare emergency pump and motor.

C. Furnish new spare emergency pump, motor, and coupler.

PART 3 GENERAL REQUIRMENTS

3.01 ADMINISTRATIVE INFORMATION

A. Definitions

1. The following acronyms, terms, and wording will be used throughout this Performance Work Statement.

PRICE SCHEDULE

a. CO – Contracting Officer

b. COR – Contracting Officers Representative

c. CCAO – Central California Area Office

d. Contractor – Prime Contractor awarded contract

e. CGB – California Great Basin Regional Office

f. RSN – Required Submittal Notices

3.02 DELIVERY TO SITE

A. Submit RSN 3.02-1, Picking Plan for Offloading Equipment:

1. Provide drawings identifying picking points for offloading spare emergency pump and motor.

2. Identify rigging and rigging configuration as part of picking plan.

3. Identify picking weights.

B. Execution

1. Do not deliver equipment prior to successfully completing spare pump and motor factory testing.

2. Provide COR with at-least 7-days’ notice prior to delivery of spare emergency pump and motor.

Include the following information with planned delivery(s):

a. Driver name.

b. Driver company.

c. Vehicle information.

d. Day of arrival.

e. Anticipated time of arrival.

3. Deliver Spare Emergency Pump and Motor to CCAO’s warehouse.

4. CCAO Personnel will operate existing 30T Overhead Crane to offload spare pump and motor.

5. Provide required rigging for offloading spare emergency pump and motor. Required rigging for offloading spare emergency pump and motor will be retained by the Government.

C. Delivery Hours and Location

1. Monday through Friday 8:00 am to 2:00 pm.

2. 7794 Folsom Dam Road, Folsom, CA 95630

3.03 PROJECT SCHEDULE

A. Develop, maintain, and use approved Project Schedule to plan, monitor, and evaluate accomplishment of work. Failure to include any element of the work will not release Contractor from completing all required work under the contract.

B. Project Schedule shall include:

1. Progress chart of suitable scale to indicate percentage of work scheduled for completion by any date.

2. Prepare schedule based on required sequence and interdependence of activities.

3. Include contract title, contract number, and Contractor's name on each sheet.

4. Include activities for procurement and fabrication of equipment.

5. Submit Schedules in sufficient detail as approved by COR.

C. Submit RSN 3.03-1, Project Schedule:

1. Represents Contractor’s as-planned approach to accomplishing the work.

2. Include columns for Task Description, Duration, Planned Start, Planned Finish and Total Slack.

3. Update Project Schedule with actual start and actual finish dates monthly or as approved by the

COR.

3.04 SUBMITTALS

A. Submit each Required Submittal Notice specified in the Submittal List. Submit RSNs in accordance with Due Date or Delivery Time specified in the Submittal List.

B. The Government will review the Required Submittal Notices within 14 days of official receipt.

C. The COR will return submittals as Approved, Conditionally Approved, or Not Approved.

D. The Contractor shall resubmit Required Submittal Notices within 14 days of receipt for Required Submittal Notices that are Conditionally Approved or Not Approved.

E. The Government will review resubmitted Required Submittal Notices within 14 days of official receipt.

1. Submit RSNs via email to distribution provided by COR after award.

F. Preparation

1. Prepare in English.

2. Label with contract number and title, and RSN.

3. Measurement units: US Customary Units.

4. Submit only checked submittals.

5. Submittals without evidence of Contractor's approval will be returned for resubmission.

6. Include the following information in transmittal letters:

a. Contract number and title.

b. RSN for each attached submittal.

c. Responsible code.

d. Number of sets for each RSN.

e. Identify submittal as initial or resubmittal.

7. More than one RSN may be submitted under a transmittal letter, provided the responsible code is the same.

G. Mark manufacturer’s data for commercial products or equipment (such as cut sheets) to identify type, model, size and characteristics.

H. Submittal List

RSN Section Title Submittals Required Due Date or Delivery Time

Email

RSN 3.02-1 Delivery to Site Picking Plan for Offloading equipment

At-least 28 days prior to delivery of equipment

RSN 3.03-1 Project Schedule Project Schedule Within 7 days of contract award 1

RSN 4.03-1 Pump and Motor Requirements

Approval data and Drawings

At-least 28 days prior to procurement

RSN 4.03-2 Pump and Motor Requirements

Factory Acceptance Testing Plans

At-least 28 days prior to Factory Acceptance Tests

RSN 4.04-1 Pump and Motor Requirements

Factory Acceptance Testing Results

Within 7 days of completing tests 1

RSN 4.05-1 Pump and Motor Requirements

O&M Manuals At-least 28 days prior to shipping pump and motor

PART 4 SPARE EMERGENCY PUMP AND MOTOR

4.01 ELECTRICAL DRAWINGS AND DATA

A. Drawings, general:

1. Equipment Layout Drawings:

a. Indicate dimension of equipment.

b. Indicate location of devices and items of equipment including nameplates, terminal blocks, wiring ducts, bus, conduit entries and other features in their relative physical location.

c. Indicate method of securing equipment to mounting plates.

2. Bill of Material List:

a. Provide information on manufacturer, style, type, rating, quantity, and other identifying information for each device or item of equipment.

b. Provide unique reference number for each device or item of equipment on bill of material.

3. Manufacturer’s Technical Data:

a. Provide technical data for each device or item of equipment.

b. Where several items are listed on same sheet, indicate items being submitted for approval.

c. Mark catalog data sheet with appropriate bill of material item number.

4.02 BASIC ELECTRICAL REQUIREMENTS

A. Electrical equipment shall conform to the requirements of the latest National Electric Code, National Electrical Safety Code. Conform to NFPA 70 and IEEE C2.

B. Extra Materials

1. Provide Government with special tools and equipment necessary to properly install, adjust, test and check operation of electrical equipment.

C. Nameplates

1. Nameplates shall be 2-inch-high x 2.5 inch wide, laminated black with white text.

2. Unit nameplate and device marker lettering shall be 3/16” high.

D. Execution

1. Do not furnish electrical equipment until approval drawings and data for associated equipment have been approved by Government.

4.03 PUMP AND MOTOR REQUIREMENTS

A. Submit RSN-4.03-1, Approval Data and Drawings

1. Letter of certification from pump manufacturer that they have reviewed the application of the pump and that the pump satisfies the application duties required for existing emergency pump.

2. Letter of certification from motor manufacturer that they have reviewed the application of the motor and that the motor satisfies the application duties required for existing emergency pump motor.

3. Manufacturer’s Technical Data

4. Pump, motor and coupling drawings.

5. Pump and motor nameplates.

6. Schematic and wiring diagrams for motor.

7. Bill of material list.

B. Submit RSN-4.03-2, Factory Acceptance Testing (FAT) Plans

1. Plans for demonstrating functionality of pump and motor.

C. Submit RSN-4.03.3, Factory Acceptance Testing Results

1. Summary of Test Results from FAT.

D. Submit RSN-4.05-8, O&M Manuals

1. Manufacturer’s O&M Manuals for pump, motor, and coupling.

a. To include but not limited to:

1) Manufacturer’s Technical data.

2) Pump, motor and coupling drawings.

3) Installation instructions.

4) Maintenance intervals.

5) Lubrication requirements.

2. List of Manufacturer’s recommended spare parts for pump and motor.

E. Products

1. Spare Emergency Pump:

a. Furnish one spare pump meeting the following requirements:

b. Manufacturers (or approved as equal):

1) Power Machinery Inc.

2) Ingersoll-Rand

3) Flowserve

c. Verify pump meets functional and dimensional requirements for replacing existing emergency pump.

d. Provide with mounting fittings and hardware for fit-up with existing equipment.

e. Provide with coupling for coupling pump to existing motor.

f. Verify pump is designed to function with existing emergency pump motor.

g. GPM: 33,700

h. Head: 60 ft.

i. Type: Double Suction

j. Pump shaft diameter: Approx. 4 3/4”

k. Inlet Flange Diameter: 42”

l. Discharge Flange Diameter: 30”

m. Flange to Flange spacing: 117”

n. Supply and discharge pipe are in line.

o. Mounted to existing footings and anchorages.

p. Built with integral lifting points

2. Spare Emergency Pump Motor

a. Furnish one spare pump motor meeting the following requirements:

b. Manufacturers (or approved as equal):

1) General Electric

2) Siemens

3) ABB

c. Verify motor meets functional requirements for existing emergency pump motor.

d. Provide with coupling for coupling motor to existing pump.

e. Provide with mounting fittings and hardware for fit-up with existing equipment.

f. Verify motor is designed to function with existing emergency pump.

g. Motor HP: 600

h. Voltage: 4160

i. Type: TS

j. Frame: 984-Y

k. Frequency: 60 Hz

l. Motor shaft diameter: Approx. 4 3/8”

m. Built with integral lifting points

3. Double Engagement Spacer Gear Coupling

a. Manufacturers (or approved as equal):

1) LoveJoy

2) SKF

b. Suitable for coupling new motor to new pump.

c. Shaft end float shall not exceed 3/16”.

d. Match bolt pattern and dimensions of existing Spacer.

e. Dimensioned to enable reinstallation of existing shaft guard (or shroud).

F. Execution

1. Perform field measurements prior to fabrication to verify fit up of new equipment with existing equipment.

2. Factory Acceptance Testing (FAT)

a. Demonstrate functionality of equipment.

b. Perform FAT prior to shipping.

c. Contractor shall allow Government to witness FAT. Provide applicable Government with applicable drawings for verification of FAT.

3. Furnish new spare emergency pump and motor.

a. Ship new spare emergency pump and motor in accordance with EPA’s SmartWay program. The website for the EPA’s SmartWay program is listed below:

https://www.epa.gov/smartway/

4. Deliver new pump to CCAO’s warehouse in accordance with section 3.02.

PART 5 SUPPORTING INFORMATION

5.01 LIST OF REFERENCES

DRAWING/PLAN

NUMBER

DRAWING/PLAN TITLE

NA Instructions for Ingersoll-Rand 30” ALV, Single Stg. Pump 05533222

485-218-688 Folsom Pumping Plant Water Distribution Flow Diagram

PART 6 PERIOD OF PERFORMANCE

6.01 WORK SCHEDULE

A. All work shall be completed within 280 calendar days after receipt of order

SECTION C - COMMERICAL CLAUSES

52.252-2 Clauses Incorporated by Reference February 1998

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):

http://www.acquisition.gov/far/

Clauses Title Date 52.204-4 Printed or Copied Double-Sided on Postconsumer Fiber Content Paper May 2011 52.204-13 System for Award Management Maintenance Oct 2018 52.204-18 Commercial and Government Entity Code Maintenance Aug 2020 52.212-4 Contract Terms and Conditions-Commercial Items Oct 2018

52.232-40 Providing Accelerated Payments to Small Business Subcontractors Dec 2013 52.242-15 Stop-Work Order Aug 1989

(End of clause)

52.212-5 Contract Terms and Conditions Required to Implement Statutes or

Executive Orders -- Commercial Items

SEPT 2021

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

(1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements

(Jan 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(2) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab and Other Covered Entities (Jul 2018) (Section 1634 of Pub. L. 115-91).

(3) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (Aug 2020) (Section 889(a)(1)(A) of Pub. L. 115- 232).

(4) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015).

(5) (5) 52.233-3, Protest After Award (Aug 1996) (31 U.S.C. 3553).

(6) 52.233-4, Applicable Law for Breach of Contract Claim (Oct 2004) (Public Laws 108-77 and 108-

78 (19 U.S.C. 3805 note)).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

[X] (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (June 2020), with Alternate I (Oct 1995) (41 U.S.C. 4704 and 10 U.S.C. 2402).

[ ] (2) 52.203-13, Contractor Code of Business Ethics and Conduct (Jun 2020) (41 U.S.C. 3509)

[ ] (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (Jun 2010) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.)

[X] (4) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Jun 2020)

(Pub. L. 109-282) (31 U.S.C. 6101 note).

[ ] (5) [Reserved].

[ ] (6) 52.204-14, Service Contract Reporting Requirements (Oct 2016) (Pub. L. 111-117, section 743 of

Div. C).

[ ] (7) 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (Oct

2016) (Pub. L. 111-117, section 743 of Div. C).

[X] (8) 52.209-6, Protecting the Government’s Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment. (Jun 2020) (31 U.S.C. 6101 note).

[ ] (9) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (Oct

2018) (41 U.S.C. 2313).

[ ] (10) [Reserved].

[ ] (11) (i) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (Mar 2020) (15 U.S.C.

657a).

[ ] (ii) Alternate I (Mar 2020) of 52.219-3.

[X] (12) (i) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns

(Sept 2021) (if the offeror elects to waive the preference, it shall so indicate in its offer) (15 U.S.C. 657a).

[ ] (ii) Alternate I (Mar 2020) of 52.219-4.

[ ] (13) [Reserved]

[ ] (14) (i) 52.219-6, Notice of Total Small Business Set-Aside (Nov 2020) (15 U.S.C. 644).

[ ] (ii) Alternate I (Mar 2020) of 52.219-6.

[ ] (15) (i) 52.219-7, Notice of Partial Small Business Set-Aside (Nov 2020) (15 U.S.C. 644).

[ ] (ii) Alternate I (Mar 2020) of 52.219-7.

[X] (16) 52.219-8, Utilization of Small Business Concerns (Oct 2018) (15 U.S.C. 637(d)(2) and (3)).

[ ] (17) (i) 52.219-9, Small Business Subcontracting Plan (Jun 2020) (15 U.S.C. 637(d)(4)).

[ ] (ii) Alternate I (Nov 2016) of 52.219-9.

[ ] (iii) Alternate II (Nov 2016) of 52.219-9

[ ] (iv) Alternate III (Jun 2020) of 52.219-9.

[ ] (v) Alternate IV (Jun 2020) of 52.219-9

[ ] (18) (i) 52.219-13, Notice of Set-Aside of Orders (Mar 2020) (15 U.S.C. 644(r)).

[ ] (ii) Alternate I (Mar 2020) of 52.219-13.

[ ] (19) 52.219-14, Limitations on Subcontracting (Mar 2020) (15 U.S.C. 637(a)(14)).

[ ] (20) 52.219-16, Liquidated Damages-Subcontracting Plan (Jan 1999) (15 U.S.C. 637(d)(4)(F)(i))

[ ] (21) 52.219-27, Notice of Service-Disabled Veteran-Owned Small Business Set-Aside (Mar 2020) (15 U.S.C. 657f).

[X] (22) (i) 52.219-28, Post Award Small Business Program Representation (Nov 2020) (15 U.S.C.

632(a)(2)).

[ ] (ii) Alternate I (MAR 2020) of 52.219-28.

[ ] (23) 52.219-29, Notice of Set-Aside for, or Sole Source Award to, Economically Disadvantaged Women-Owned Small Business Concerns (Mar 2020) (15 U.S.C. 637(m)).

[ ] (24) 52.219-30, Notice of Set-Aside for, or Sole Source Award to, Women-Owned Small Business Concerns Eligible Under the Women-Owned Small Business Program (Mar2020) (15 U.S.C. 637(m)).

[ ] (25) 52.219-32, Orders Issued Directly Under Small Business Reserves (Mar 2020) (15 U.S.C.

644(r)).

[ ] (26) 52.219-33, Nonmanufacturer Rule (Mar 2020) (15U.S.C. 637(a)(17)).

[X] (27) 52.222-3, Convict Labor (Jun 2003) (E.O.11755).

[X] (28) 52.222-19, Child Labor-Cooperation with Authorities and Remedies (Jan2020) (E.O.13126).

[X] (29) 52.222-21, Prohibition of Segregated Facilities (Apr 2015).

[X] (30) (i) 52.222-26, Equal Opportunity (Sep 2016) (E.O.11246).

[ ] (ii) Alternate I (Feb 1999) of 52.222-26.

[X] (31) (i) 52.222-35, Equal Opportunity for Veterans (Jun 2020) (38 U.S.C. 4212).

[ ] (ii) Alternate I (Jul 2014) of 52.222-35.

[X] (32) (i) 52.222-36, Equal Opportunity for Workers with Disabilities (Jun 2020) (29 U.S.C. 793).

[ ] (ii) Alternate I (Jul 2014) of 52.222-36.

[X] (33) 52.222-37, Employment Reports on Veterans (Jun 2020) (38 U.S.C. 4212)

[ ] (34) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O.

13496).

[X] (35) (i) 52.222-50, Combating Trafficking in Persons (Oct 2020) (22 U.S.C. chapter 78 and E.O.

13627).

[ ] (ii) Alternate I (Mar 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).

[X] (36) 52.222-54, Employment Eligibility Verification (Oct 2015). (Executive Order 12989). (Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial items as prescribed in 22.1803.)

[ ] (37) (i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA–Designated Items (May

2008) ( 42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

[ ] (ii) Alternate I (May 2008) of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

[ ] (38) 52.223-11, Ozone-Depleting Substances and High Global Warming Potential

Hydrofluorocarbons (Jun 2016) (E.O. 13693).

[ ] (39) 52.223-12, Maintenance, Service, Repair, or Disposal of Refrigeration Equipment and Air

Conditioners (Jun 2016) (E.O. 13693).

[ ] (40) (i) 52.223-13, Acquisition of EPEAT®-Registered Imaging Equipment (Jun 2014) (E.O.s 13423 and 13514).

[ ] (ii) Alternate I (Oct 2015) of 52.223-13.

[ ] (41) (i) 52.223-14, Acquisition of EPEAT®-Registered Televisions (Jun 2014) (E.O.s 13423 and 13514).

[ ] (ii) Alternate I (Jun2014) of 52.223-14.

[ ] (42) 52.223-15, Energy Efficiency in Energy-Consuming Products (May 2020) (42 U.S.C.

8259b).

[ ] (43) (i) 52.223-16, Acquisition of EPEAT®-Registered Personal Computer Products (Oct 2015)

(E.O.s 13423 and 13514).

[ ] (ii) Alternate I (Jun 2014) of 52.223-16.

[X] (44) 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving (Jun 2020)

(E.O. 13513).

[ ] (45) 52.223-20, Aerosols (Jun 2016) (E.O. 13693).

[ ] (46) 52.223-21, Foams (Jun2016) (E.O. 13693).

[ ] (47) (i) 52.224-3 Privacy Training (Jan 2017) (5 U.S.C. 552 a).

[ ] (ii) Alternate I (Jan 2017) of 52.224-3

[X] (48) 52.225-1, Buy American-Supplies (JAN 2021) (41 U.S.C. chapter 83).

[ ] (49) (i) 52.225-3, Buy American-Free Trade Agreements-Israeli Trade Act (JAN 2021)(41 U.S.C.

chapter 83, 19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, 19 U.S.C. 4001 note.

[ ] (ii) Alternate I (May 2014) of 52.225-3.

[ ] (iii) Alternate II (May 2014) of 52.225-3.

[ ] (iv) Alternate III (May 2014) of 52.225-3.

[ ] (50) 52.225-5, Trade Agreements (Oct 2019) (19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note).

[X] (51) 52.225-13, Restrictions on Certain Foreign Purchases (Feb 2021) (E.O.’s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury).

[ ] (52) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Oct 2016) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C.

2302Note).

[ ] (53) 52.226-4, Notice of Disaster or Emergency Area Set-Aside (Nov2007) (42 U.S.C. 5150).

[ ] (54) 52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (Nov2007) (42 U.S.C. 5150).

[ ] (55) 52.229-12, Tax on Certain Foreign Procurements (Feb 2021).

[ ] (56) 52.232-29, Terms for Financing of Purchases of Commercial Items (Feb 2002) (41 U.S.C. 4505, 10 U.S.C. 2307(f)).

[ ] (57) 52.232-30, Installment Payments for Commercial Items (Jan 2017) (41 U.S.C. 4505, 10 U.S.C.

2307(f)).

[X] (58) 52.232-33, Payment by Electronic Funds Transfer-System for Award Management (Oct2018) (31 U.S.C. 3332).

[ ] (59) 52.232-34, Payment by Electronic Funds Transfer-Other than System for Award Management (Jul 2013) (31 U.S.C. 3332).

[ ] (60) 52.232-36, Payment by Third Party (May 2014) (31 U.S.C. 3332).

[ ] (61) 52.239-1, Privacy or Security Safeguards (Aug 1996) (5 U.S.C. 552a).

[ ] (62) 52.242-5, Payments to Small Business Subcontractors (Jan 2017) (15 U.S.C. 637(d)(13)).

[ ] (63) (i) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Feb 2006) (46 U.S.C. 55305 and 10 U.S.C. 2631).

[ ] (ii) Alternate I (Apr 2003) of 52.247-64.

[ ] (iii) Alternate II (Feb 2006) of 52.247-64

(c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

[X] (1) 52.222-41, Service Contract Labor Standards (Aug 2018) (41 U.S.C. chapter67).

[X] (2) 52.222-42, Statement of Equivalent Rates for Federal Hires (May 2014) (29 U.S.C. 206 and 41 U.S.C. chapter 67).

[ ] (3) 52.222-43, Fair Labor Standards Act and Service Contract Labor Standards-Price Adjustment

(Multiple Year and Option Contracts) (Aug 2018) (29 U.S.C. 206 and 41 U.S.C. chapter 67).

[X] (4) 52.222-44, Fair Labor Standards Act and Service Contract Labor Standards-Price Adjustment

(May 2014) (29U.S.C.206 and 41 U.S.C. chapter 67).

[ ] (5) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for

Maintenance, Calibration, or Repair of Certain Equipment- Requirements (May 2014) (41 U.S.C.

chapter 67).

[ ] (6) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for

Certain Services-Requirements (May 2014) (41 U.S.C. chapter 67).

[X] (7) 52.222-55, Minimum Wages Under Executive Order 13658 (Nov 2020).

[X] (8) 52.222-62, Paid Sick Leave Under Executive Order 13706 (Jan 2017) (E.O. 13706).

[ ] (9) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (Jun 2020) (42 U.S.C. 1792).

(d) Comptroller General Examination of Record. The Contractor shall comply with the provisions of this paragraph

(d) if this contract was awarded using other than sealed bid, is in excess of the simplified acquisition threshold, as defined in FAR 2.101, on the date of award of this contract, and does not contain the clause at 52.215-2, Audit and Records-Negotiation.

(1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor’s directly pertinent records involving transactions related to this contract.

(2) The Contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR subpart 4.7, Contractor Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved.

(3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law

(e) (1) Notwithstanding the requirements of the clauses in paragraphs (a), (b), (c), and (d) of this clause, the Contractor is not required to flow down any FAR clause, other than those in this paragraph (e)(1) in a subcontract for commercial items. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause-

(i) 52.203-13, Contractor Code of Business Ethics and Conduct (Jun 2020) (41 U.S.C. 3509).

(ii) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (Jan

2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(iii) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab and Other Covered Entities (Jul 2018) (Section 1634 of Pub. L. 115-91).

(iv) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance

Services or Equipment. (Aug 2020) (Section 889(a)(1)(A) of Pub. L. 115-232).

(v) 52.219-8, Utilization of Small Business Concerns (Oct 2018) (15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds the applicable threshold specified in FAR 19.702(a) on the date of subcontract award, the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities.

(vi) 52.222-21, Prohibition of Segregated Facilities (Apr 2015).

(vii) 52.222-26, Equal Opportunity (Sep 2015) (E.O.11246).

(viii) 52.222-35, Equal Opportunity for Veterans (Jun 2020) (38 U.S.C. 4212).

(ix) 52.222-36, Equal Opportunity for Workers with Disabilities (Jun 2020) (29 U.S.C. 793).

(x) 52.222-37, Employment Reports on Veterans (Jun 2020) (38 U.S.C. 4212).

(xi) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O.

13496). Flow down required in accordance with paragraph (f) of FAR clause 52.222-40.

(xii) 52.222-41, Service Contract Labor Standards (Aug 2018) (41 U.S.C. chapter 67).

(xiii) (A) 52.222-50, Combating Trafficking in Persons (Oct 2020) (22 U.S.C. chapter 78 and E.O 13627). (B) Alternate I (Mar 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).

(xiv) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment- Requirements (May2014) (41 U.S.C. chapter 67).

(xv)52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services-Requirements (May 2014) (41 U.S.C. chapter 67).

(xvi) 52.222-54, Employment Eligibility Verification (Oct 2015) (E.O. 12989).

(xvii) 52.222-55, Minimum Wages Under Executive Order 13658 (Nov 2020).

(xviii) 52.222-62, Paid Sick Leave Under Executive Order 13706 (Jan 2017) (E.O. 13706).

(xix) (A) 52.224-3, Privacy Training (Jan 2017) (5 U.S.C. 552a). (B) Alternate I (Jan 2017) of 52.224-3.

(xx) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Oct 2016) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302 Note).

(xxi) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (Jun 2020) (42 U.S.C. 1792). Flow down required in accordance with paragraph (e) of FAR clause 52.226-6.

(xxii) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Feb 2006) (46 U.S.C.

55305 and 10 U.S.C. 2631). Flow down required in accordance with paragraph (d) of FAR clause 52.247- 64.

(2) While not required, the Contractor may include in its subcontracts for commercial items a minimal number of additional clauses necessary to satisfy its contractual obligations

DOI-AAAP-0028 ELECTRONIC INVOICING AND PAYMENT REQUIREMENTS

– INVOICE PROCESSING PLATFORM

APRIL 2013

Payment requests must be submitted electronically through the U.S. Department of the Treasury’s Internet Payment Platform System (IPP).

“Payment requests” means any request for contract financing payment or invoicing payment by the Contractor. To constitute a proper invoice, the payment request must comply with the requirements identified in the applicable Prompt Payment clause included in the contract, or the clause 52.212-4 Contract Terms and Conditions- Commercial Items included in commercial item contracts. The IPP website address is: https://www.ipp.gov.

Under this contract, the following documents are required to be submitted as an attachment to the IPP invoice:

Contractor shall upload an electronic copy of the invoice and supporting documents to the IPP website. To assist in the payment process, contractors are encouraged to send a courtesy copy of the invoice electronically, with attention to the Contracting Officer, to the following email address: sheibeck@usbr.gov

Invoices must be submitted via IPP in order to be properly processed within the payment terms set forth under this contract.

The Contractor must use the IPP website to register access and use IPP for submitting requests for payment. The Contractor Government Business Point of Contact (as listed in SAM) will receive enrollment instructions via email from the Federal Reserve Bank of Boston (FRBB) prior to the contract award date, but no more than 3 – 5 business days of the contract award date. Contractor assistance with enrollment can be obtained by contacting the IPP Production Helpdesk via email ippgroup@bos.frb.org or phone (866) 973-3131.

If the Contractor is unable to comply with the requirement to use IPP for submitting invoices for payment, the Contractor must submit a waiver request in writing to the Contracting Officer with its quotation.

(End of Local Clause)

DOI-AAAP-0050 Contractor Performance Assessment Reporting System December 2015

a. FAR 42.1502 directs all Federal agencies to collect past performance information on contracts. The Department of the Interior (DOI) has implemented the Contractor Performance Assessment Reporting System (CPARS) to comply with this regulation. One or more past performance evaluations will be conducted in order to record your contract performance as required by FAR 42.15.

b. The past performance evaluation process is a totally paperless process using CPARS. CPARS is a web-based system that allows for electronic processing of the performance evaluation report. Once the report is processed, it is available in the Past Performance Information Retrieval System (PPIRS) for Government use in evaluating past performance as part of a source selection action.

c. We request that you furnish the Contracting Officer (CO) with the name, position title, phone number, and email address for each person designated to have access to your firm's past performance evaluation(s) for the contract no later than 30 days after award. Each person granted access will have the ability to provide comments in the Contractor portion of the report and state whether or not the Contractor agrees with the evaluation, before returning the report to the Assessing Official (AO). Information in the report must be protected as source selection sensitive information not releasable to the public.

d. When your Contractor Representative(s) are registered in CPARS, they will receive an automatically generated email with detailed login instructions. Further details, systems requirements, and training information for CPARS is available at https://www.cpars.gov/.

e. Within 60 days after the end of a performance period, the AO will complete an interim or final past performance evaluation, and the report will be accessible at https://www.cpars.gov/.

1. Contractor Representatives may then provide comments in response to the evaluation or return the evaluation without comment.

2. Your comments should focus on objective facts in the AO's narrative and should provide your views on the causes and ramifications of the assessed performance.

3. All information provided should be reviewed for accuracy prior to submission.

4. If you elect not to provide comments, please acknowledge receipt of the evaluation by indicating No comment in the space provided, and then selecting “Accept the Ratings and Close the Evaluation”.

5. Your response is due within 60 calendar days after receipt of the CPAR. On day 15, the evaluation will become available in PPIRS-RC marked as “Pending” with or without comments and whether or not it has been closed.

6. If you do not sign and submit the CPAR within 60 days, it will automatically be returned to the Government and will be annotated: -The report was delivered/received by the contractor on (date). The contractor neither signed nor quoted comment in response to this assessment. -

f. The following guidelines apply concerning your use of the past performance evaluation:

1. Protect the evaluation as source selection information. After review, transmit the evaluation by completing and submitting the form through CPARS. If for some reason you are unable to view and/or submit the form through CPARS, contact the CO for instructions.

2. Strictly control access to the evaluation within your organization. Ensure the evaluation is never released to persons or entities outside of your control.

3. Prohibit the use of or reference to evaluation data for advertising, promotional material, pre-award surveys, responsibility determinations, production readiness reviews, or other similar purposes.

g. If you wish to discuss a past performance evaluation, you should request a meeting in writing to the CO no later than seven days following your receipt of the evaluation. The meeting will be held in person or via telephone or other means during your 60-day review period.

h. A copy of the completed past performance evaluation will be available in CPARS for your viewing and for Government use supporting source selection actions after it has been finalized.

(End of Local Clause)

WBR 1452.223-81 Safety and Health – Bureau of Reclamation August 2021

(a) The Contractor shall not require any person employed in the performance of this contract (including subcontracts) to work under conditions which are unsanitary, hazardous, or dangerous to the employee's health or safety.

(b) Contractor shall comply with the most current version of the Bureau of Reclamation Safety and Health Standards (RSHS) and, if applicable, the requirements of the Accident Prevention Clause (FAR 52.236-13).

The RSHS manual shall be obtained at http://www.usbr.gov/ssle/safety/RSHS/rshs.html

(c) Comply with the standards issued by the Secretary of Labor at 29 CFR Part 1926 and 29 CFR Part 1910 from the Occupational Safety and Health Administration, U.S. Department of Labor, www.osha.gov .

(d) In the event there is a conflict between the requirements contained in paragraphs (b) and (c) referenced herein, the more stringent requirement shall prevail.

(e) The Contractor shall submit a written proposed safety program as prescribed in the RSHS and the written specifications.

(f) The Contractor shall maintain an accurate record of and shall report to the Contracting Officer (or authorized representative) in the manner prescribed by the Contracting Officer, all cases of death, occupational diseases, or traumatic injury to employees or the public involved, and property damage in accordance with the RSHS and OSHA guidelines.

(g) The rights and remedies of the Government provided in this clause are in addition to any other rights and remedies provided by law or under this contract.

(h) If the RSHS is updated or amended by Reclamation during the course of this contract, the contractor will be notified in writing. The contractor shall comply with the current RSHS immediately upon written notification.

Should the contractor feel that the updated version of RSHS constitutes a substantive change to the contract, affecting price or time (or both), the contractor may request an equitable adjustment in the contract price. Any such requests shall include a price proposal submitted in compliance with Contract Clause WBR 1452.243-80, Modification Proposals - Bureau of Reclamation, and in sufficient detail to allow meaningful analysis of labor, equipment and material.

WBR 1452.237-80 Security Requirements – Bureau of Reclamation February 2017

(a) General Security Requirements:

(1) This clause addresses security requirements, including general procedural requirements, information security requirements, contractor employee suitability requirements, identification card requirements, site security requirements, vessel exclusion barriers, and information technology security requirements.

Within this clause, COR means Contracting Officer's Representative. If there is no COR appointed and identified to the Contractor, the term instead will mean the Program Manager or any other authorized individual responsible for technical oversight under the contract. “Work site” means the Government facility, office, construction site, and any other area within the Government office or facility that the Contractor must access to accomplish work under this contract.

(2) The work performed under this contract shall only be accomplished by individuals (in the employment of the Contractor or any subcontractors) whose conduct and behavior is consistent with the efficiency of the Federal Service and the requirements of this contract, and who are acceptable to the CO. If Reclamation finds a Contractor employee to be unsuitable or unfit for his or her assigned duties, the CO will direct the Contractor to remove the individual from the contract and access to the Federal facility at which the contract activities are occurring.

(3) The Contractor’s employees governed by this contract may need access to sensitive information and/or sensitive areas. The Federal Government (Government) reserves the right, in its sole discretion, to determine suitability of Contractor personnel and deny access to any sensitive information or project specific area to any personnel for any cause.

(4) The Contractor is responsible for informing and ensuring compliance by its employees with any applicable security procedures of the Government facility where work may be performed under this contract.

(5) Any Contractor employee that will have access to a Federally controlled facility or information system will be required to have a Government-issued identification card, consisting of a Personal Identity Verification (PIV) Card, a temporary identification card, or a visitor badge. (Note: within the Department of the Interior this card is known as a DOI Access Card.) During performance of the contract, the Contractor shall keep the COR apprised of any changes in personnel, or changes in personnel access or duration, to ensure that performance is not delayed by compliance with credentialing processes.

(6) A Contractor employee will not be provided access to a Government facility or information system until a Government PIV Card, temporary identification card, or visitor identification badge has been issued to the Contractor employee. For those individuals that will be receiving a PIV Card, the Government may, at its discretion, issue a temporary identification card or visitor identification badge after the electronic background investigation forms have been received and the investigation is initiated.

(7) All Contractor employees shall access the facility via the facility’s entry screening system and visibly display the Government-issued PIV Card, temporary identification card, or visitor identification badge at all times. Contractor employees must visibly wear the Government-issued identification card at all times they are on Government facilities. Contractor employees are responsible for the safekeeping of all Government-issued identification cards, whether on-site or off-site. Cards that have been lost, damaged, or stolen must be reported to the COR and DOI Access Sponsor within 24 hours. The Contractor shall return all identification cards and card keys and any other Government property and information upon completion of performance or when personnel depart permanently or for a period of 7 days or more. The Contractor may be required to turn in access control cards or identification cards on a daily basis.

(8) Misuse or loss of access control or identification cards, or failure to comply with required surrender of such cards may, at Government discretion, result in Contractor personnel being denied access to the work site, at no cost to Government. The Contractor may be charged up to $500 for each occurrence for any required replacement of Government-issued access control or identification cards due to loss or misuse. At the end of contract performance, or when a Contractor employee is no longer working under this contract, the Contractor shall ensure that all access control and identification cards are returned to the COR.

(9) All Contractor personnel, including subcontractor personnel, with access to the work site shall be U.S.

citizens or foreign individuals legally residing in, or legally admitted to, the U.S. For all non-U.S.

citizens working under this contract, irrespective of length of time working on the contract, the Contractor shall provide to the COR, legible and valid copies of the individual’s passport and visa (unless individual is on the Visa Waiver Program) a minimum of 14 calendar days prior to beginning work or arriving at the facility. A driver’s license is not acceptable identification. In addition, a completed form I-94 shall be submitted to the COR upon the individual’s arrival at the work facility and prior to beginning work.

(10) The Contractor shall report all contacts with entities, individuals, and counsel/representatives (including foreign entities and foreign nationals) who seek in any way to obtain unauthorized access to sensitive information or areas. The Contractor shall report any violations of contract provisions, laws, executive orders, regulations, and guidance to the Contracting Officer (CO). The Contractor shall report any information raising a doubt as to whether an individual’s eligibility for continued employment or access to sensitive information is consistent with the interests of National Security and the Public Trust.

(11) Unsanctioned, negligent, or willful inappropriate action on the part of the Contractor (or its employees) may result in termination of the contract or removal of some Contractor employees from Reclamation facilities at no cost to the Government. These actions include, but are not limited to, exploration of a sensitive system and/or information, introduction of unauthorized and/or malicious software, inappropriate release of sensitive information, or failure to follow prescribed access control policies and/or security procedures. Failure to comply with Reclamation policies, procedures, or other published security requirements may result in termination of the contract or removal of some contracted employees from Reclamation buildings and/or facilities at no cost to the Government.

(12) All provisions of this clause shall equally apply to all subcontractors. The Contractor shall incorporate the substance of this clause in all subcontracts.

(13) These security requirements apply to all sections of this Contract including Contract Drawings and other Contract Specifications as applicable. Related documents include other general provisions of Construction or Operations and Maintenance type Contracts, including FAR clauses by reference or as amended by related documents.

(b) Information Security Requirements.

(1) Sensitive Information. The term “sensitive information” means any information which warrants a degree of protection and administrative control as defined by Reclamation or that meets the criteria for exemption from public disclosure set forth under Sections 552 and 552a of Title 5, United States Code:

The Freedom of Information Act and the Privacy Act. Sensitive information is generally categorized as FOR OFFICIAL USE ONLY (FOUO) information or CONTROLLED UNCLASSIFIED INFORMATION (CUI), but in some cases may include other unclassified information. (The protection of National Security information is beyond the scope of this clause. If any work on National Security information is required under this contract, it is addressed under other contract clauses.) The Contractor shall protect this type of information from unauthorized release into public domain, or to unauthorized persons, organizations, or subcontractors. Information which, either alone or in aggregate, is deemed sensitive by Reclamation shall be handled and protected in accordance with Reclamation directives and standards for identifying and safeguarding sensitive information (SLE 02- 01), which is available from the COR or at http://www.usbr.gov/recman/DandS.html.

(i) Any Government-furnished information or material does not become the property of the Contractor and may be withdrawn at any time. Upon expiration or termination of the contract, all documents released to the Contractor and any material created using data from such documents shall be returned to the COR for final disposition. Government-furnished information residing on any electronic systems (laptops servers, desktops, media) shall be deleted from those systems using a COR-approved data erasure solution. Only with prior authorization from the CO may the Contractor retain the material. The Contractor or subcontractor shall not disclose or release the materials provided to the Contractor to any individuals of the Contractor's organization not directly engaged in providing services under the contract or that do not have a valid need-to-know. All technical data provided to the Contractor by the Government shall be protected from public or private disclosure in accordance with the markings printed on them. All other information relating to the items to be delivered or the services to be performed under this contract shall not be disclosed by any means without prior approval of the CO. Prohibited dissemination or disclosure includes, but is not limited to: permitting access to such information by foreign nationals or by immigrant aliens who may be employed by the Contractor, publication of technical or scientific papers, advertising, disclosure to Contractor staff not investigated and deemed acceptable at the appropriate information sensitivity level, and any other public release. The Contractor shall maintain, and furnish upon request of the CO, records of the names of individuals who have access to sensitive material in its custody. All questions regarding information security, access, and control shall be referred to the COR.

(ii) The Contractor shall not release to anyone outside the Contractor’s organization any sensitive, or otherwise protected information, regardless of medium in which it is contained (for example, film, tape, document, electronic), pertaining to any part of this contract or any Reclamation program or activity, unless the CO has given prior written approval. This includes, but is not limited to, news releases, marketing promotions, articles, interviews, reports, social media posts, and any other media releases.