Bollard_and_Fence_Catalogue.pdf

Parks, Recreation, and Natural Resources Guidelines and Standards BOLLARDS AND FENCE CATALOG Adopted July 2024

V.2024-11

TYPE MODEL MANUFACTURER PHOTO NOTES TYPICAL APPLICATION

2-Rail Mortise Fence PRNR design Pride Enterprises

36"h x 4x6 interior posts with 2x6 mortise cuts at 18" and 30" high.

Sink 72" high posts to 36" deep/ 36" to top above grade. 4x6 posts slope 45 degrees to public face. 6x6 end posts get 1" chamfer top. 8'-0" horizontals typical // set posts at 8'-0" on center

All parks

Alligator/ Predator Fence galvanized 9-gauge with black vinyl coating Various

6' high with additional outward angled top to prevent climbing. 6 gauge core black 8' vinyl coted 2" open chain link fence extented 2' below finished grade, to include bottom rail 2" high from ground

Dog parks, as needed

Alumunium Fence PRNR design Various Tier 1 parks

Cattle Fence Various

Prefab purchased from outside source, smooth or barbed wire depending on the project, barbed wire to be avoided by public

All parks

Galvanized Chainlink Fence galvanized 9-gauge Various

• Fence height determined per use and location

• Posts > 6’ Schedule 20

• Posts < 6’ Schedule 40

• Gate Posts: Schedule 40

• All new installs to include bottom rail Schedule 20, 2" from ground

• Include mid-rail, if over 6 feet high

• Wire mesh, Galv., 9 gauge plus coating

• Low use hinges, Box or Bulldog Hinge

• For Athletic Back Stops: Schedule 40 posts w/ 9 gauge wire

All parks

Hog Wire Fence Various Prefab purchased from outside source All parks

Vinyl Coated Chainlink Fence galvanized 9-gauge wire with black vinyl coating Various

• Fence height determined per use and location

• Posts > 6’ Schedule 20

• Posts < 6’ Schedule 40

• Gate Posts: Schedule 40

• All new installs to include bottom rail Schedule 20

• Include mid-rail, if over 6 feet high

• Wire mesh, Galv. Vinyl coated, 9 gauge wire plus coating

• Low use hinges, Box or Bulldog Hinge

• For Athletic Back Stops: Schedule 40 posts w/ 9 gauge wire

• Cuts need to be coated to protect from rust

All parks

Flat Top Wood Panel Fence

PRNR design per project Various

Design may vary per project. Typical fence is minimum 72" h x 1x6 face boards mounted on 2x4 horizontals mounted on 4x4 posts. All pressure treated wood

Park areas abutting homes

Shadowbox Wood Fence

PRNR design per project Various

Design may vary per project. Design is the same on both sides of the fence.

Typical fence is minimum 72" h x 1x6 face boards mounted on 2x4 horizontals mounted on 4x4 posts. All pressure treated wood

Park areas abutting homes

FENCES

*All facilities and amenities should meet all applicable federal, state and local codes and be ADA compliant, as required. 2 of 2

Parks, Recreation, and Natural Resources Guidelines and Standards GATE CATALOG Adopted July 2024

V.2024-1

TYPE MODEL MANUFACTURER PHOTO NOTES TYPICAL APPLICATION

Cattle Gate/ Heavy Duty Gate/ Pipe Gate

Aluminium tube with 6 equal horizontal and 4 equal verticals Various

12' or 16' wide x 4' h, locks may be daisy-chained to allow locking by PRNR or Private Owners sharing gate as needed.

All Parks

Chainlink Drive Gate

9-gauge wire, galvanized or black vinyl-coated Various 12' or 16' wide x 4' h, PRNR lock, no public access

Playground maintenance access Dog parks

Pedestrian Gate at Mortise Fence

Clear opening, finish with end post.

Pride Various

36" max. clear opening to limit access by ATVs and cars.

Park boundary and parking lot pedestrian access points

Electric Gate Various Aluminium gate and there should be locks on the pins and in the hinges. To comply with Facilities Standards.

All Parks

Chainlink Pedestrian Gate

9-gauge wire, galvanized or black vinyl-coated Various Cut ends of the chainlink need to be coated to prevent rust. Playgrounds

Cable Gate/ Chain Gate Custom Various

Lowest grade access gate for maintenance or boat access at low-intensity uses with PVC tubing or reflective tape. These should only be used where concern for gate as tripping or climbing hazard is low.

All parks

Chicane Custom Pressure Treated Wood Various See US Forest Service Guide for dimensions.

Natural areas to prevent ATVS but allow pedestrian and wheelchair access Equistrian access

Kissing Gate Custom Pressure Treated Wood Various See US Forest Service Guide for dimensions.

Natural areas to prevent ATVS but allow pedestrian and wheelchair access

Swing Gate Custom Pressure Treated Wood Various Spring loaded swing gate for pedestrian/ bike access in properties with cattle. Natural areas

Square Tube Gate Custom Aluminum Various

Standard grade access gate for maintenance access at most parks. Provide bollard for securing gate in both open and closed positions. Chain and hook or lock to secure in position.

All parks

Double Metal Square Gate/ Swing Gate

Custom Aluminium Various Used in highly visible areas in urban settings.

All parks

GATES

*All facilities and amenities should meet all applicable federal, state and local codes and be ADA compliant, as required. 1 of 1