Bnet Amnd 3 for VendorNet.pdf

_____ State Initials 1 of 2 _____ ATT Initials

WISCONSIN DEPARTMENT OF ADMINISTRATION

DIVISION OF ENTERPRISE OPERATION

DOA-3021 (R 01-2011)

S. 51.01(5) WIS. STATS., AND

S. 111.32 (13M) WIS. STATS

STATE BUREAU OF PROCUREMENT

101 EAST WILSON STREET, 6TH FLOOR

POST OFFICE BOX 7867

MADISON, WI 53707-7867

FAX (608) 267-0600

TTY (608) 267-9629

HTTP:VENDORNET.STATE.WI.US

CONTRACT AMENDMENT

Contract No: 505004-O14-BCNMGSRVCS-01 Amendment No.: 3 Date: July 8, 2019

Contract Title: BadgerNet Managed Network Services Agreement (the “Agreement”)

This Amendment is entered into by and between the State of Wisconsin, Department of Administration (the “State”) and the Contractor, whose name, address and principal office appears below

Contractor Name: AT&T Corp, on behalf of itself and its service providing affiliates

Contractor Address: P.O. Box 2605

City: Bedford Park State: Illinois Zip: 60499-2605

Principal Officer: Joseph M. Tucci

1. Exhibit 6 of the Agreement is hereby replaced in its entirety with Exhibit 6 attached hereto. The revised Exhibit 6 reflects the following changes:

Pricing for any BadgerNet services provided outside the state for the purposes of connectivity to the network shall be ICB for all bandwidths

Pricing for BadgerNet CAT A, CAT B, and CAT D where available above 1Gbps of bandwidth shall be ICB

BadgerNet Pricing tab is updated as follows:

Category C-Asymmetrical Pricing is deleted and replaced in its entirety to allow for reduced pricing and increased bandwidth options as a new tab “Category C-Asymmetrical.” Pricing for Frontier Dynamic and Static IP services is deleted.

Under the State Data Centers, Broadband Internet Service Symmetrical, replaces the $16,745.42 charge with ICB. AT&T agrees that all or any ICB prices proposed for the listed locations or any others shall be less than $16,745.42.

Addition of Traffic Shaping service for DET; AT&T will upgrade the PE routers in Madison and Milwaukee to support traffic shaping. Cost of the service is $3,975 per month. No additional terms or conditions apply to the delivery or use of this service.

Addition of 200Mbps and 500Mbps bandwidth increment options to Category A, Category B, and Category D where available.

Remove managed video as a Service Offering as it is no longer available.

WiscNet on BadgerNet tab is updated:

to add a $100/month charge for WiscNet on BadgerNet Connect +1 which is additional 1 Gbps connections requiring ISP services at existing locations rather than charging customers the full price for each additional connection.

indicates Table 1 pricing is “not to exceed” to allow for lower pricing based on actual installation pricing removes the Pittsville, Swallow, Suring, Mukwanago and Northern Ozaukee school districts as that special pricing no longer applies

Added on the WiscNet on BadgerNet tab, Table 3 Pricing for Eligible Non-Profit Organizations

DocuSign Envelope ID: F71A7447-1881-486F-B64F-E0976A3FA3BADocuSign Envelope ID: BF1D2384-41F2-4A3C-96A7-2F65B81EAECC

_____ State Initials 2 of 2 _____ ATT Initials

Addition of a Secure Internet Bundle offering to consist of Internet access using either ISP Service Providers AT&T or WiscNet incorporated herein as Schedule 1 with pricing reflected in Exhibit 6

2. For purposes of the Agreement and its amendments, references to BadgerNet Converged Network (BCN) after means BadgerNet.

Except as expressly changed by this Amendment, the terms, conditions, rights and obligations of Agreement No.

505004-O14-BCNMGSRVCS-01 shall remain in effect unchanged. In the event of inconsistency or conflict in the Agreement and this Amendment, the provisions of this Amendment shall control. This Amendment shall be deemed to be effective as of the date of the last signature hereto (the “Effective Date”).

For State of Wisconsin Department of Administration

For AT&T Corp

101 East Wilson Street Madison, Wisconsin 53703

P.O. Box 2605 Bedford Park, IL 60499-2605

Click or tap here to enter text. Click here to enter text.

Printed Name Printed Name

Click or tap here to enter text. Click here to enter text.

Title Title

Click or tap here to enter text.

Signature Signature

Date Date

DocuSign Envelope ID: F71A7447-1881-486F-B64F-E0976A3FA3BA

Lead Solutions Architect

Michelle Senderson

8/1/2019 | 3:00 PM CDT

DocuSign Envelope ID: BF1D2384-41F2-4A3C-96A7-2F65B81EAECC

CIO

David Cagigal

Contract No: 505004-O14-BCNMGSRVCS-01 Amendment No.: 3 Schedule 1

Contract Title: BadgerNet Managed Network Services Agreement

____ State Initials ____ ATT Initials

SECURE INTERNET BUNDLE

This Schedule details the addition of a Secure Internet Bundle service option for BadgerNet customer entities such as schools or libraries. All pricing information is contained in the updated Exhibit 6-Pricing. This addition bundles the internet service with a firewall option. All services provided as part of the Secure Internet Bundle will be in accordance with the Service Level Agreements and corresponding performance requirements as described herein.

All pricing related to this Schedule is reflected in Exhibit 6 of the Agreement.

To purchase this service the school or library must also either be receiving either Category A or Category B WAN services under the BadgerNet contract.

1. AT&T FLEXWARE APPLICATIONS

The Service virtualizes network functions in Software that traditionally have been performed in proprietary, dedicated hardware. Types of applications (sometimes referred to as Virtual Network Functions or VNFs) currently supported include:

ROUTER – MEDIATES THE TRANSMISSION ROUTES OF DATA OVER A NETWORK.

FIREWALL – BLOCKS VARIOUS FORMS OF UNAUTHORIZED ACCESS TO OR FROM A PRIVATE NETWORK.

2. AT&T VIRTUAL NEXT-GENERATION FIREWALL

The virtual firewalls are designed to protect a customer network at the premises where the device is placed. The network protection consists of general access control via port and protocol definitions as well as next-generation firewall functions. The next-generation firewall capabilities go beyond port and protocol to support advanced security features down to the application level.

2.1. Feature Tiers

There are two different feature tiers for virtual firewalls (each may be purchased as managed service as well);

Essential and Enhanced. The Essential tier covers basic firewall capabilities including inbound and outbound port and protocol-based policies. The Enhanced tier allows for enablement of the UTM (Unified Threat Monitoring) capabilities to perform multiple security functions on a single virtual appliance. The following features are generally supported for each tier however any given feature may not be available depending upon the selected technology of the specific firewall:

Firewall Options

Essential Enhanced

- AT&T Security Center Reporting*

- Fault and Incident Management*

- Inbound/Outbound Policy

- GEO IP blocking

- Network Address Translation

- IPSec VPN Tunneling

- Syslog Forwarding

Essential plus:

- Web/URL Filtering

- Anti-Virus

- Anti-Malware

- Intrusion Prevention

- Application Awareness

- Application Control

- Remote Access VPN

* AT&T Managed Only

DocuSign Envelope ID: F71A7447-1881-486F-B64F-E0976A3FA3BADocuSign Envelope ID: BF1D2384-41F2-4A3C-96A7-2F65B81EAECC

AT&T Managed Security Services Reporting: Standard security reports are available to customers through the Business Center portal under the Threat Manager tile. Reports include::

Report content consists of event and policy related data generated from “security related” devices managed and monitored by AT&T MSS (Managed Security Services).

Reports summarize important Top 20 events

MSS Report content is derived from device security logs and does not include system access, management or utilization data.

AT&T MSS Security Best Practices and Customer- defined device logging procedures, may affect data that is ultimately displayed in MSS Reports.

Report Data is updated on Business Direct daily

Reports are available for each of the following levels o For each Asset (i.e. Sensor) o For each Site (Location) o For all Sites (Company level)

Reports types are subject to change

Retention:

The AT&T Business Direct tool carries reports for only CheckPoint Sun, CheckPoint Resilience, NBFW and MIDS.

Endpoint Security reports are not available on the AT&T BusinessDirect® tool.

For Summary:

Hourly: 90 days

Daily data – 90 days

Weekly 6 months

Monthly – 1 year

For Drilldown:

Hourly: 14 days

Daily: 45 days

Weekly: 4 months

Customer responsibilities: Responsibilities specific to AT&T Managed Virtual Firewall are listed below:

Designate Customer Site Security Liaison who will be the technical focal point to work with AT&T to help promote a successful implementation.

DocuSign Envelope ID: F71A7447-1881-486F-B64F-E0976A3FA3BADocuSign Envelope ID: BF1D2384-41F2-4A3C-96A7-2F65B81EAECC

Provide a Site contact who will participate in installation and troubleshooting (as deemed necessary by

AT&T), and who will conduct pre-installation and post-installation User Acceptance Testing (UAT).

Provide a Tier 1 Helpdesk

Review and provide relevant comments (in the form of additional data requirements, preliminary conclusions, or recommended technical architecture) or Subject Matter Experts (SME) resources from applicable information technology departments or business units to assist in completing AT&T deliverables in a timely manner.

Ensure AT&T access to the Customer Site to maintain AT&T-provided hardware and software. Should AT&T be denied access at a Site, the Customer will incur the applicable rescheduling Charges.

Perform Site preparation including, but not limited to, heating, ventilation, air conditioning, electricity, cabling, entrance facilities and demarcation extensions.

Provide space, racks, connectors and suitable environment for the AT&T CPE, as specified by the manufacturer.

Notify AT&T in advance about planned changes to Customers’ network configuration(s). Required changes that result from these notifications may incur a conversion Charge for affected MSS components.

Notify AT&T at least five (5) working days in advance of any scheduled maintenance, planned outages, or

Service configuration changes that may interfere with device monitoring. Customer must notify AT&T immediately of any unscheduled activities that may interfere with device monitoring.

Provide a security policy consisting of a list of desired Internet Protocol (IP) protocols to be implemented, including source addresses, destination addresses, ports, Transmission Control Protocol (TCP) or User

Datagram Protocol (UDP) and a description of the protocols to be implemented.

Provide traffic estimates to AT&T during the initial implementation of the Service and any time incremental bandwidth upgrades of over 1Mbps anticipated at a particular Customer Site.

Provide the necessary network information requested by AT&T in order to allow AT&T to provision Security device management access into the AT&T SNOC.

Identify a suitable test location during enablement and implementation to properly test desired Security

Policies prior to opening all Sites on the MSS.

Utilize internal Hosts and Servers that are properly maintained and kept up to date by the Customer.

Servers, LAN devices, operating systems and other architecture components of a Customer's infrastructure need to be properly maintained and kept up to date by loading the most recent software upgrades and the latest available security patches. It is also the Customer's responsibility to make every reasonable effort to keep those platforms that connect to AT&T security devices free from infection from potential worms, Trojans, viruses, or similar security threats. AT&T is not responsible for patching or removing security threats on Customer maintained equipment, including all Host and Server equipment connected to AT&T-managed security devices.

Provide and maintain a dedicated Plain Old Telephone Service ("POTS") line for the Term of the Services.

The POTS line serves as a back-up access mechanism for connectivity between the SNOC and the AT&T CPE.

DocuSign Envelope ID: F71A7447-1881-486F-B64F-E0976A3FA3BADocuSign Envelope ID: BF1D2384-41F2-4A3C-96A7-2F65B81EAECC

It is through this link that AT&T will manage power down, or make changes to the AT&T CPE and operating parameters, as necessary. The installation and cost of this link is Customer's responsibility, and AT&T will work with Customer to coordinate installation based on availability of all MSS and Customer-required components. Customer agrees to ensure (i) that the POTS line is not disconnected and (ii) that the POTS line is not used for any other purpose, or (iii) not modified or changed in any way.

Ensure that all Customer systems and networks (including but not limited to those which are outsourced), that connect with those belonging to MSS, implement appropriate security controls which are designed to prevent loss, disclosure, unauthorized access or service disruption. The Customer must also ensure AT&T will have unrestricted access to AT&T's assets, either via remote access or physical access as appropriate, for the proper operation of the Service. Customer must also restrict access to and use of these systems and assets only by authorized Customer personnel. The use of the AT&T network and its facilities is intended for use by the Customer only, and not for those who may be interconnected with the Customer's systems and network.

Immediately notify AT&T if a Customer suspects a security breach within the Customer's network.

Administer individual IP addresses on a Customer's Local Area Network ("LAN").

Define and maintain the Customer's own security policy and internal security response procedures. In the event there is an incident generated either from the Internet or within the Customer's enterprise, it is the

Customer's responsibility to have appropriate mitigation contacts, processes, and procedures in place.

AT&T will work with the Customer's designated security contacts according to AT&T procedures and notify the Customer of incidents identified by MSS. AT&T will make Customer-requested Security changes identified by the Customer.

Properly package, ship and return all AT&T CPE upon termination or expiration of this Agreement. Failure to do so may result in additional Charges.

Service Level Objectives:

Meantime to Repair (MTTR) objectives AT&T has the following meantime to repair targets for the MFS-PB service:

o Repair 90% of Severity 1 Incidents not requiring dispatch within 4 Hours of ticket generation o Repair 90% of tickets requiring 1 dispatch within 8 Hours of ticket generation o Repair 90% of Customer generated tickets not requiring dispatch within 4 Hours of ticket generation, o Repair 90% of administration tickets within 8 Hours of ticket generation

3. BADGERNET CUSTOMER RESPONSIBILITIES

3.1. Local Contact

Customer will designate one (1) person and one (1) alternate contact per Site as a Local Contact for AT&T or vendors dispatched by AT&T for installation and maintenance activities

3.2. Network Architecture

Customer is required to provide AT&T with the applicable network architecture design at each Site as part of the service delivery process.

DocuSign Envelope ID: F71A7447-1881-486F-B64F-E0976A3FA3BADocuSign Envelope ID: BF1D2384-41F2-4A3C-96A7-2F65B81EAECC

3.3. Out-of-Band Management

For any AT&T equipment that requires out-of-band (“OOB”) management, AT&T may perform OOB management and testing via Mobility, Broadband or POTS analog extension, and where required AT&T may provide either the Mobility, Broadband or POTS modem. Customer is responsible for providing specific aspects of the necessary connectivity.

The Mobility option requires adequate wireless network coverage at the spot where AT&T will install the Mobility modem at the Site, to be determined at AT&T’s sole discretion, and where implemented on AT&T's Mobility network the SIM card and wireless data access is included as part of the service. Where implemented on a Third-Party Mobility network, Customer is responsible to provide SIM card and wireless data access. If the Mobility modem must be located more than 20 feet in cable length from AT&T equipment due to wireless coverage or other installation considerations, Customer is responsible for providing Cat-5 or Cat-6 inside wiring with RJ-45 connectors from the AT&T equipment to the Mobility modem, with no intervening Customer Equipment such as LAN switches.

If Mobility service is not available or if the Broadband or POTS option is selected by Customer or by AT&T, Customer is responsible for acquiring the Broadband circuit or both inbound/outbound POTS line needed for OOB management. Any extension must conform to the service specifications, allowing OOB remote access that must be available 24 hours per day.

3.4. Use of Software

In conjunction with the services, Customer may be allowed to use or be given access to certain software, including third-party software. Where AT&T provides third-party software, it is licensed to AT&T by the third-party or their licensors solely for use by Customer under the terms stated herein and any other applicable license terms. All title and intellectual property rights in and to the software (and the constituent elements thereof, including but not limited to images, photographs, animations, video, audio, music, text and "applets" incorporated into the software are owned by AT&T or the Third-Party suppliers. The software is protected by copyright laws and international copyright treaties, as well as other intellectual property laws and treaties.

Customer possession, access, or use of the software does not transfer ownership of the software to Customer.

Customer may not use software provided with a service after the termination of the Customer’s Pricing Schedule or after termination or disconnection of the service. Customer may not copy software provided with a service unless expressly permitted in writing by AT&T. Customer may not remove, modify or obscure any copyright, trademark or other proprietary rights notices that appear on any software. Unless permitted by the terms of an applicable open source software license, Customer may not reverse engineer, decompile or disassemble any software provided except and to the extent that they are expressly permitted by applicable law to do this, and then only upon providing at least ten (10) days advance written notice to AT&T. Additional restrictions that may apply to software provided may be specified in this Schedule or in any license agreement that may accompany such software.

AT&T will provide Customer with applicable third-party software license terms and conditions. If Customer chooses to use the third-party software, and the third-party or its licensors require that Customer agree to additional terms and conditions regarding the use of the third-party software, the Customer’s use of the software indicates its acceptance of such terms.

3.5. Modifications

If Customer makes or fails to make any change that may affect AT&T's ability to provide the service, such as changes to its computing or communications platform, Customer must immediately communicate this information to AT&T and Customer will be responsible for any reasonable charges to resolve the problem. If

DocuSign Envelope ID: F71A7447-1881-486F-B64F-E0976A3FA3BADocuSign Envelope ID: BF1D2384-41F2-4A3C-96A7-2F65B81EAECC

Customer fails to inform AT&T of its current or future network configuration and problems occur in delivering the service, then Customer is responsible for any reasonable charges to resolve the problem.

Customer shall not install or modify software; nor remove, relocate or modify AT&T equipment without AT&T's prior written approval excluding Section 4.5 Configuration/Provisioning. Customer de-installations or warehousing of unused AT&T equipment is not permitted. Should Customer wish to de-install AT&T equipment, Customer must submit a disconnect MACD request so that AT&T can dispatch the appropriate AT&T (or AT&T designated) personnel to recover the AT&T equipment and software.

3.6. Network Connection

Customer is responsible for connecting the Customer’s computing and communications platform to the applicable port(s) on AT&T Equipment, including providing the appropriate media adapter/cables for connecting to its LAN media and providing the internal cables required to connect the LEC, PTT or other network providers' services. Customer is responsible for providing electrical power.

3.7 Security

Customer shall be solely responsible for implementing security procedures necessary to limit access to the Services and/or Customer data, files, or programs to Customer's authorized users and shall maintain a procedure external to the Services (including without limitation AT&T Equipment) for reconstruction of lost or altered files, data or programs.

3.8 Return of Equipment

Upon termination of Customer’s Amendment #3 or disconnect of Service at a Site, Customer shall, within thirty days of AT&T's request and at a mutually agreed time during Standard Business Hours, provide access to AT&T or third-party designated by AT&T to uninstall and remove AT&T Equipment. Customer shall return AT&T Equipment and Software in the same condition as originally installed, ordinary wear or tear excepted, or Customer shall pay the depreciated value for all associated AT&T Equipment and Software, and shall cooperate with AT&T to facilitate the removal of all logical configurations.

4. AT&T RESPONSIBILITIES

4.1. Design and Ordering

AT&T will work with Customer to identify requirements for the AT&T equipment and software based upon Customer-provided information and requirements as set forth by AT&T. This design will reflect any relevant information provided by Customer to AT&T needed for the delivery and billing of the service.

Customer may request new orders and/or changes to orders through the Customer’s AT&T account representative.

4.2. Deployment

AT&T will configure and deploy the service, including project management, staging and shipping of the applicable AT&T equipment and software, as appropriate.

4.3. Installation

AT&T will perform the following installation steps as appropriate in connection with the service ordered by Customer during Standard Business Hours:

Physical installation of AT&T equipment;

Logical configuration of the Host and related software;

Loading of software image(s) and instantiation of VNF(s), as applicable;

Configuration of AT&T-managed VNF software; and

DocuSign Envelope ID: F71A7447-1881-486F-B64F-E0976A3FA3BADocuSign Envelope ID: BF1D2384-41F2-4A3C-96A7-2F65B81EAECC

Logical configuration required to establish connectivity of the Host and AT&T-managed VNF software with the AT&T management center.

Installation is considered completed at the point that the Host and AT&T-managed VNF software have established connectivity with the AT&T management center.

4.4. Management

Standard management provided by AT&T for the Host includes management of the hardware, base operating system, plug and play software, hypervisor, resource allocation for virtual machines, and logical connectivity between virtual machines. The VNF software may be managed by AT&T or by Customer as determined in the Customer’s Pricing Schedule.

4.4.a. Customer Managed

Customer managed solutions require the customer to manage the VNF software monitoring and reporting, back-ups password management including, full responsibility for VNF configuration, policy management, VNF monitoring & reporting, VNF back- ups, firmware upgrades, password management, and ensuring connectivity to the VNF for license and feature updates.

AT&T will not have access to customer passwords and will not be able to assist in restoration.

4.4.b. AT&T Managed

AT&T-managed services include configuration/provisioning, monitoring, fault management, maintenance, reporting, and change management as dictated in the following sections.

4.5. Configuration/Provisioning

AT&T will configure/provision the service(s) in accordance with this Schedule and Exhibit 6 of the Agreement.

Any changes to the initial configuration will be handled as per the Change Management section below.

4.6. Monitoring

AT&T will monitor the service(s) in accordance with this Schedule and the Customer’s Pricing Schedule.

4.7. Fault Management

AT&T provides fault management for the service(s) in accordance with this Schedule and the Customer’s Pricing Schedule, including the following:

fault monitoring;

fault recognition;

trouble isolation;

problem resolution;

issue tracking via Trouble Ticket; and interface with maintenance vendors, as needed.

AT&T shall provide fault isolation and resolution services until AT&T resolves the problem or determines that the problem is not in the service.

4.8. Maintenance

AT&T will perform required maintenance functions as deemed necessary by AT&T to help protect the safety, stability, and security of the service, including maintenance and upkeep of AT&T tools necessary for operation of the service. Maintenance includes repair or replacement of AT&T equipment, and applicable patches and/or upgrades for Host related software and AT&T-provided VNF software.

DocuSign Envelope ID: F71A7447-1881-486F-B64F-E0976A3FA3BADocuSign Envelope ID: BF1D2384-41F2-4A3C-96A7-2F65B81EAECC

The maintenance level for Hosts and software is 24x7x4, meaning 24 hours per day x 7 days per week with average service restoration within 4 hours, except for locations where, at AT&T's sole discretion, best effort is available. AT&T will notify Customer at time of order if a given location is outside of AT&T's 24x7x4 maintenance area.

4.9. Problem Severity Code Definitions

The Customer defines the severity of a problem when the Customer calls into the eMaintenance Center. The following definitions are provided as guidance to assist the Customer to appropriately assign the severity of a problem.

Problem Severity Code Definitions

Severity Definitions

1 Critical problem that stops Customer from functioning. The network, service or product is unusable, and Customer is completely out of service.

2 Major problem with severe impact on Customer business but does not stop it from functioning.

The network, service or product is interrupted or severely degraded and Customer is not able to work at expected levels of performance and productivity. Also used for Severity 1 problems with a 100% bypass but awaiting final resolution.

3 Minor problem that does not seriously affect service or network availability or functionality used in Customer business.

4 No problem. Customer business is not impacted. There is no significant impact to the user.

Incident may be a request for service information or a suggestion.

4.10. Reporting

AT&T provides standard network operations reports via AT&T Business Center which focus on basic VNF and Host performance. Operations reports are provided on a scheduled periodic basis, with each report displaying information gathered during the previous period's activity. AT&T may change the format, details and types of the available reports without notice.

4.11. Change Management

Customer may request orders, and changes to orders, through Customer’s AT&T account representative or via AT&T’s designated alternative procedures, if any, which may change from time to time and can be found within AT&T Business Center or may be provided to Customer by AT&T upon request.

Customer may request supported configuration changes (logical software MACDs) for AT&T- managed VNFs and there will be no charge associated with logical MACDs. Customer is limited to two logical software MACD changes per month, per VNF. Physical MACD requests (other than disconnect orders), and other change-related charges will be billed per location, as outlined in Exhibit 6.

4.11.a. Definitions:

Simple Type B – Requires a truck roll or dispatch, for example:

Site Survey-Setup service - (check for Power, rack space, LTE OOB signal, etc.).

Extend Demarc service – up to 200’ of cabling.

DocuSign Envelope ID: F71A7447-1881-486F-B64F-E0976A3FA3BADocuSign Envelope ID: BF1D2384-41F2-4A3C-96A7-2F65B81EAECC

4.12. Billing

Billing for each service Component begins on the day following the service Activation Date of that service Component.

4.13. Disconnects

To terminate or disconnect a Host and associated software, Customer must submit a disconnect order using AT&T Business Center or AT&T’s designated alternative procedures. Recurring charges continue to apply for a period of 30 days from the date AT&T receives a disconnect order or until the disconnect date specified in the disconnect order (as extended by Customer as provided below, if applicable), whichever is later. Customer may delay or cancel a disconnect order without charge, at any time prior to 48 hours before the disconnect date, by submitting a written request using AT&T Business Center or AT&T’s designated alternative procedures.

After disconnection, Customer must decide with AT&T to return all AT&T equipment and software unless otherwise stated and agreed upon in writing by AT&T. Disconnections necessitate the removal of all logical configuration and related information from AT&T equipment.

5.1. General SLA Terms

AT&T has established service level performance objectives for AT&T FlexWare. While AT&T cannot guarantee performance objectives, AT&T will provide credits to an eligible Customer when a performance objective is not met by AT&T. If an SLA states that a Customer is eligible for an SLA credit, this means that Customer is eligible subject to the terms, definitions and any exclusions or limitations stated herein.

Except where an individual SLA states differently, SLAs, and the collection of data measurements against a performance objective, shall begin on the Service Activation Date for the applicable Service or Service Component with SLA reporting being made available to Customer in the next complete monthly reporting period after activation.

AT&T may make performance measurement data available to Customer via AT&T Business Center.

SLA calculations will be based upon all Critical Outages within the monthly reporting period, subject to the exclusions and limitations set forth herein.

5.1.a. Customer Eligibility for SLAs

To be eligible for SLAs, the Host must meet the following requirements:

New Hosts must be tested and accepted by AT&T.

AT&T Equipment must have a means of dedicated Out-of-Band access for remote management.

DocuSign Envelope ID: F71A7447-1881-486F-B64F-E0976A3FA3BADocuSign Envelope ID: BF1D2384-41F2-4A3C-96A7-2F65B81EAECC

5.2. SLA Summary Table

AT&T FlexWare SLA Summary Table

Service Level

Agreement Performance Objective Service Credit

On-Time

Provisioning SLA Completed on or before scheduled Service

Activation Date 50% of applicable Installation charge

AT&T FlexWare SLA Summary Table

Service Level

Agreement Performance Objective Service Credit

Availability SLA 99.9% 5% of monthly recurring charge for affected Host and associated VNFs

5.3. SLA-3. SLA Details

AT&T has responsibility for SLA tracking and measurement and will provide SLA service credits proactively.

5.3.a. On-Time Provisioning SLA

The On-Time Provisioning SLA measures on-time implementation and order completion of new AT&T Equipment and Software, based upon the scheduled Service Activation Date agreed upon by AT&T and Customer after all the required data for the Site is available. If the Service Activation Date is missed due to AT&T’s failure, Customer is eligible for a service credit of 50% against the related Installation Charge.

DocuSign Envelope ID: F71A7447-1881-486F-B64F-E0976A3FA3BADocuSign Envelope ID: BF1D2384-41F2-4A3C-96A7-2F65B81EAECC

Exhibit 6 - Pricing BCN Managed Network Services

Contract #505004-O14-BCNMGSRVCS-01

13. Removal of Frontier from the Category C IP Broadband offering

4. BadgerNet Pricing tab, under the State Data Centers, Broadband Internet Service Symmetrical, the $16,745.42 charge is replaced with "ICB." AT&T agrees that all or any ICB prices proposed for the listed locations or any others shall be less than $16,745.42.

11. AT&T Internet Service to its own tab similar to the WiscNet tab.

12. Replaced the CAT C IPBB pricing to reflect services and pricing that are currently available

8. Added on the WiscNet on BadgerNet tab, Table 3 Pricing for Eligle Non Profit Organizations

10. Remove Managed Video Service Offering from BadgerNet Pricing Tab as it is no longer available

H. As of 03/26/2017, ISP services from WiscNet are available on BadgerNet, see pricing tables on worksheet entitled "WiscNet on BadgerNet" WiscNet will provide Dual Stack (IPv4/IPv6) capability and allocate

IP addresses to BCN Customers and Agencies of the WiscNet on BadgerNet Services.

I. As of 03/26/17, BCN Customers and Agencies understand and agree that they can not resell or provide, at no cost, internet services under this agreement to third parties.

J. Per Amendment 3 (June 2019):

9. Added a New Tab for Secure Internet Bundle

7. Added on BadgerNet pricing tab 200Mbps and 500Mbps Options to Category A, Category B, and Category D where available.

6. BadgerNet Pricing tab, addition of Traffic Shaping services for DET

5. WiscNet on BadgerNet tab has been changed to indicate Table 1 pricing is Not-to-Exceed; WiscNet on BadgerNet Connect +1 is for additional 1 Gbps connections to be added at $100/month per additional connection (see #9 of Notes section); and the removal of named customers no longer on BadgerNet (Pittsville, Swallow, Suring, Mukwanago and Northern Ozaukee school districts)

1. Pricing for the services in this Exhibit that are provided outside of Wisconsin shall be priced as ICB for all bandwidths.

3. Category C-Asymmetrical pricing has been replaced in its entirety and is now a separate Tab. The revised structure provides the same pricing available at a particular location (anticipated availability determined by site address during a pre-qualification process by AT&T). The services associated with implementation, management, and consolidated billing of the broadband service have been broken out along with guidance for a new broadband service is being implemented or taking over an existing broadband service (see AT&T Internet on BadgerNet tab)

2. Pricing for BadgerNet CAT A, B, and D services above 1Gbps of bandwidth shall be ICB

F. Definition of Special Construction: The not-to-exceed price per mile includes entrance facilities to the minimum point of penetration, non-reusable fiber construction, and non-reusable equipment necessary to provide the bandwidth requested at any individual site. Any fraction of a mile can be rounded up to the next full mile.

G. As of 03/26/2017, Category C-Symmetrical Services is deleted, MIS on BadgerNet is extened to all BCN Customers and Agencies

A. AT&T will provide a 7% discount on the transport rates for all customers at bandwidths of 1.5 Mb and above on the current network provided the TEACH spending levels remain at $1.6M or more per month.

These new rates will begin with the November 2016 billing.

B. AT&T will not bill the $342,150/Mo MSP charge for the first six months (August 2016-January 2017). The $342,150 will begin billing on February 1, 2017 and the Term of the agreement will begin at that time.

C. Per Section 5 of the Managed Services for BadgerNet Converged Network Contract the rates and charges set out in this Exhibit 6-Pricing are fixed during the Term of the Agreement unless mutually amended by the Parties and are exclusive of any applicable taxes, regulatory fees or surcharges.

D. A twelve (12) month minimum commitment is required for any circuit or termination penalty will apply which will be calculated at 50% of the price over the remaining Term

E. Not to Exceed One-Time Construction Cost for Fiber Installation at $80,000.00 per mile consists of: entrance facilities to the minimum point of penetration, non-reusable fiber construction, and non-reusable equipment necessary to provide the bandwidth requested at any individual site.

Pricing Info & Revisions (7/8/2019) 1 of 31

DocuSign Envelope ID: F71A7447-1881-486F-B64F-E0976A3FA3BADocuSign Envelope ID: BF1D2384-41F2-4A3C-96A7-2F65B81EAECC

14. Category C - clarification of Broadband and Broadband II for Circuit type

Pricing Info & Revisions (7/8/2019) 2 of 31

DocuSign Envelope ID: F71A7447-1881-486F-B64F-E0976A3FA3BADocuSign Envelope ID: BF1D2384-41F2-4A3C-96A7-2F65B81EAECC

State of Wisconsin BCN

Seven Year Pricing with No Commitment

Region 1 Region 2 Region 3 Region 4 Region 5 Region 6 Region 7 Region 8 Region 9

Monthly Rate Monthly Rate Monthly Rate Monthly Rate Monthly Rate Monthly Rate Monthly Rate Monthly Rate Monthly Rate

6 Mbps 425.00$ 425.00$ 425.00$ 425.00$ 375.00$ 425.00$ 425.00$ 375.00$ 375.00$

10 Mbps 524.00$ 524.00$ 524.00$ 524.00$ 500.00$ 524.00$ 524.00$ 500.00$ 442.00$

20 Mbps 750.00$ 750.00$ 750.00$ 750.00$ 635.00$ 750.00$ 750.00$ 635.00$ 635.00$

50 Mbps 850.00$ 850.00$ 850.00$ 850.00$ 745.00$ 850.00$ 850.00$ 745.00$ 745.00$

100 Mbps 999.00$ 999.00$ 999.00$ 999.00$ 794.00$ 999.00$ 999.00$ 794.00$ 794.00$

200 Mbps 1,141.00$ 1,141.00$ 1,141.00$ 1,141.00$ 903.00$ 1,141.00$ 1,141.00$ 903.00$ NA

500 Mbps 1,205.00$ 1,205.00$ 1,205.00$ 1,205.00$ 972.00$ 1,205.00$ 1,205.00$ 971.00$ NA

1 Gbps 1,499.00$ 1,499.00$ 1,499.00$ 1,499.00$ 1,198.00$ 1,499.00$ 1,499.00$ 1,196.00$ 892.00$

10 Gig ICB ICB ICB ICB ICB ICB ICB ICB ICB

Region 1 Region 2 Region 3 Region 4 Region 5 Region 6 Region 7 Region 8 Region 9

Monthly Rate Monthly Rate Monthly Rate Monthly Rate Monthly Rate Monthly Rate Monthly Rate Monthly Rate Monthly Rate

6 Mbps 400.00$ 400.00$ 400.00$ 400.00$ 350.00$ 400.00$ 400.00$ 350.00$ 350.00$

10 Mbps 499.00$ 499.00$ 499.00$ 499.00$ $475.00 499.00$ 499.00$ 475.00$ 417.00$

20 Mbps 725.00$ 725.00$ 725.00$ 725.00$ 610.00$ 725.00$ 725.00$ 610.00$ 610.00$

50 Mbps 825.00$ 825.00$ 825.00$ 825.00$ 720.00$ 825.00$ 825.00$ 720.00$ 720.00$

100 Mbps 975.00$ 975.00$ 975.00$ 975.00$ $769.00 975.00$ 975.00$ 769.00$ 769.00$

200 Mbps 1,117.00$ 1,117.00$ 1,117.00$ 1,117.00$ $879.00 1,117.00$ 1,117.00$ 880.00$ NA

500 Mbps 1,180.00$ 1,180.00$ 1,180.00$ 1,180.00$ $948.00 1,180.00$ 1,180.00$ 948.00$ NA

1 Gbps 1,475.00$ 1,475.00$ 1,475.00$ 1,475.00$ $1,173.00 1,475.00$ 1,475.00$ 1,171.00$ 867.00$

10 Gig ICB ICB ICB ICB ICB ICB ICB ICB ICB

Region 1 Region 2 Region 3 Region 4 Region 5 Regtion 6 Region 7 Region 8 Region 9

Bandwidth Monthly Rate Monthly Rate Monthly Rate Monthly Rate Monthly Rate Monthly Rate Monthly Rate Monthly Rate Monthly Rate

10 Mbps NA NA 315.00$ 315.00$ 315.00$ NA NA 315.00$ 315.00$

CATEGORY D: ETHERNET SERVICE

CATEGORY A: WAN SERVICE WITH QUALITY OF SERVICE

CATEGORY B: WAN

SERVICE WITHOUT

QUALITY OF SERVICE

CATEGORY A: WAN

SERVICE WITH QUALITY

OF SERVICE

CATEGORY B: WAN SERVICE WITHOUT QUALITY OF SERVICE

BadgerNet Pricing (7/8/2019) 3 of 31

DocuSign Envelope ID: F71A7447-1881-486F-B64F-E0976A3FA3BADocuSign Envelope ID: BF1D2384-41F2-4A3C-96A7-2F65B81EAECC

100 Mbps NA NA 475.00$ 475.00$ 475.00$ NA NA 475.00$ 475.00$

200 Mbps NA NA 537.00$ 537.00$ 537.00$ NA NA 537.00$ 537.00$

500 Mbps NA NA 607.00$ 607.00$ 607.00$ NA NA 607.00$ 607.00$

1 Gbps NA NA 750.00$ 750.00$ 750.00$ NA NA 750.00$ 750.00$

10 Gbps NA NA ICB ICB ICB NA NA ICB ICB

100 Gbps NA NA ICB ICB ICB NA NA ICB ICB

Within AT&T Territory

Only

BANDWIDTH INCREMENT One Time Cost Monthly RateOne Time CostMonthly Rate One Time CostMonthly RateOne Time Cost Monthly Rate One Time Cost Monthly Rate

10 Gbps $0.00 included included included included included

100 Gbps $0.00 ICB $0.00 ICB $0.00 ICB $0.00 ICB $0.00 ICB

BANDWIDTH INCREMENT One Time Cost Monthly RateOne Time CostMonthly Rate One Time CostMonthly RateOne Time Cost Monthly Rate One Time Cost Monthly Rate

10 Gbps $0.00 ICB $0.00 ICB $0.00 ICB $0.00 ICB $0.00 ICB

100 Gbps $0.00 ICB $0.00 ICB $0.00 ICB $0.00 ICB $0.00 ICB

BANDWIDTH INCREMENT One Time Cost Monthly RateOne Time CostMonthly Rate One Time CostMonthly RateOne Time Cost Monthly Rate One Time Cost Monthly Rate

10 Gbps $0.00 included included included included included

100 Gbps $0.00 ICB $0.00 ICB $0.00 ICB $0.00 ICB $0.00 ICB

BANDWIDTH INCREMENT One Time Cost Monthly RateOne Time CostMonthly Rate One Time CostMonthly RateOne Time Cost Monthly Rate One Time Cost Monthly Rate

10 Gbps $0.00 ICB $0.00 ICB $0.00 ICB $0.00 ICB $0.00 ICB

100 Gbps $0.00 ICB $0.00 ICB $0.00 ICB $0.00 ICB $0.00 ICB

Disaster Recovery DataCenter (3135 West Highland Blvd, Milwaukee WI 53208)

BANDWIDTH INCREMENT One Time Cost Monthly RateOne Time CostMonthly Rate One Time CostMonthly RateOne Time Cost Monthly Rate One Time Cost Monthly Rate

10 Gbps $0.00 included included included included included

100 Gbps $0.00 ICB $0.00 ICB $0.00 ICB $0.00 ICB $0.00 ICB

BANDWIDTH INCREMENT One Time Cost Monthly RateOne Time CostMonthly Rate One Time CostMonthly RateOne Time Cost Monthly Rate One Time Cost Monthly Rate

5830 FEMRITE Data Center

STATE DATA CENTERS

WAN SERVICE: WAN with QoS

WAN SERVICE: WAN with QoS

BROADBAND INTERNET SERVICE (Symmetrical) -

101 E Wilson St Madison WI 53703 Data Center

Year 1 Year 2 Year 3

BROADBAND INTERNET SERVICE (Symmetrical)

Year 5

Year 5

Year 1 Year 2 Year 3 Year 4

WAN SERVICE: WAN with QoS

BROADBAND INTERNET SERVICE (Symmetrical)

Year 1 Year 2 Year 3 Year 4

Year 4 Year 5

BadgerNet Pricing (7/8/2019) 4 of 31

DocuSign Envelope ID: F71A7447-1881-486F-B64F-E0976A3FA3BADocuSign Envelope ID: BF1D2384-41F2-4A3C-96A7-2F65B81EAECC

10 Gbps $0.00 ICB $0.00 ICB $0.00 ICB $0.00 ICB $0.00 ICB

100 Gbps $0.00 ICB $0.00 ICB $0.00 ICB $0.00 ICB $0.00 ICB

MANAGED SERVICE PROVIDER

MSP

Monthly Rate

TOTAL MSP $342,150

BadgerNet Pricing (7/8/2019) 5 of 31

DocuSign Envelope ID: F71A7447-1881-486F-B64F-E0976A3FA3BADocuSign Envelope ID: BF1D2384-41F2-4A3C-96A7-2F65B81EAECC

TABLE 1 - WiscNet on BadgerNet Pricing (all Table 1 pricing is Not-to-Exceed (NTE))

Mission Band Name

Student Enrollment or Equity Factor

12 Month Term

WiscNet Annual Fee

Annual Fee is Billed

Monthly (Annual Fee divided by 12)

One-Time Fees for

Network Access Up to 1 Gb

One-Time Fees for

Network Acess 1G and 10G

K-12 Education K1 1-199 6,000$ 500$ 2,461$ 7,946$

(DPI Enrollment) K2 200-399 6,600$ 550$ 2,461$ 7,946$

K3 400-599 7,200$ 600$ 2,461$ 7,946$

K4 600-799 7,800$ 650$ 2,461$ 7,946$

K5 800-999 8,400$ 700$ 2,461$ 7,946$

K6 1,000-1,199 9,000$ 750$ 2,461$ 7,946$

K7 1,200-1,399 9,600$ 800$ 2,461$ 7,946$

K8 1,400-1,599 10,200$ 850$ 2,461$ 7,946$

K9 1,600-1,799 10,800$ 900$ 2,461$ 7,946$

K10 1,800-1,999 11,400$ 950$ 2,461$ 7,946$

K11 2,000-2,499 12,600$ 1,050$ 2,461$ 7,946$

K12 2,500-2,999 13,800$ 1,150$ 2,461$ 7,946$

K13 3,000-3,999 15,600$ 1,300$ 2,461$ 7,946$

K14 4,000-4,999 17,400$ 1,450$ 2,461$ 7,946$

K15 5,000-5,999 19,200$ 1,600$ 2,461$ 7,946$

K16 6,000-9,999 21,600$ 1,800$ 2,461$ 7,946$

K17 10,000-19,999 26,400$ 2,200$ 2,461$ 7,946$

K18 20,000-49,999 42,720$ 3,560$ 2,461$ 7,946$

K19 50,000 and up 115,680$ 9,640$ 2,461$ 7,946$

Municipality/County Govt/City Govt M1 1-24,999 6,000$ 500$ 2,461$ 7,946$

(population) M2 25,000-99,999 7,200$ 600$ 2,461$ 7,946$

M3 100,000-149,999 8,400$ 700$ 2,461$ 7,946$

M4 150,000-224,999 9,000$ 750$ 2,461$ 7,946$

M5 225,000 and up 10,200$ 850$ 2,461$ 7,946$

CESA C1 All 6,600$ 550$ 2,461$ 7,946$

Municipality/County Govt/City Govt L1 See Table A 9,000$ 750$ 2,461$ 7,946$

(population) L2 See Table A 9,960$ 830$ 2,461$ 7,946$

L3 See Table A 10,440$ 870$ 2,461$ 7,946$

L4 See Table A 15,480$ 1,290$ 2,461$ 7,946$

L5 SWITCH System 6,000$ 500$ 2,461$ 7,946$

L6 Individual Libraries 6,000$ 500$ 2,461$ 7,946$

Technical College Campus T1 1-2,000 12,000$ 1,000$ 2,461$ 7,946$

(WTCSB Fact Book) T2 2,001-2,500 18,050$ 1,504$ 2,461$ 7,946$

WiscNet on BadgerNet (7/8/2019) 6 of 31

DocuSign Envelope ID: F71A7447-1881-486F-B64F-E0976A3FA3BADocuSign Envelope ID: BF1D2384-41F2-4A3C-96A7-2F65B81EAECC

T3 2,501-3,500 24,100$ 2,008$ 2,461$ 7,946$

T4 3,501-5,000 30,150$ 2,513$ 2,461$ 7,946$

T5 5,001-9,000 36,200$ 3,017$ 2,461$ 7,946$

T6 9,001 and up 48,000$ 4,000$ 2,461$ 7,946$

Private College P1 1-499 7,200$ 600$ 2,461$ 7,946$

(IPEDS) P2 500-999 9,000$ 750$ 2,461$ 7,946$

P3 1,000-2,999 16,800$ 1,400$ 2,461$ 7,946$

P4 3,000 and up 20,400$ 1,700$ 2,461$ 7,946$

P5 10,000 and up 40,000$ 3,333$ 2,461$ 7,946$

Specialized S3 Milwaukee Museum 7,200$ 600$ 2,461$ 7,946$

S4 Pier I 6,000$ 500$ 2,461$ 7,946$

S6 WI Dept of Military Affairs 13,200$ 1,100$ 2,461$ 7,946$

S7 State of Wisconsin 150,000$ 12,500$ 2,461$ 7,946$

S12 WI Tech College System Admin 6,600$ 550$ 2,461$ 7,946$

S14 SWIB 6,000$ 500$ 2,461$ 7,946$

S15 WEDC 6,000$ 500$ 2,461$ 7,946$

L1

L2

L3

L4

TABLE B - Other Fees Not Mentioned Above Remote Site Fee $1,500 Per Site Per Year, Billed Monthly

South Central Library System

NOTES:

Table A - Tier Assignments for Library Systems

Milwaukee County Federated Library System

Arrowhead Library System

Kenosha County Public Library System

Northern Waters Library System

Outagamie Waupaca Library System

Southwest Library System

Winding Rivers Library System

Lakeshores Library System

Nicolet Federated Library System

Winnefox Library System

Wisconsin Valley Library System

Bridges Library System

Indianhead Federated Library System

WiscNet on BadgerNet (7/8/2019) 7 of 31

DocuSign Envelope ID: F71A7447-1881-486F-B64F-E0976A3FA3BADocuSign Envelope ID: BF1D2384-41F2-4A3C-96A7-2F65B81EAECC

TABLE 2. Grandfathered WiscNet BCN Customers

Member Name

End Date of

Multi-Year

Agreement

FY18 FY19 FY20 FY21

Racine Lutheran High School 6/30/2019 $6,930 $7,275

TABLE 3. WiscNet on BadgerNet Pricing: Eligible Non-Profit Organizations

Mission Band Name Equity Factor

12 Month Term

WiscNet Annual Fee

Annual Fee is Billed

Monthly (Annual Fee divided by 12)

One-Time Fees for

Network Access Up to 1 Gb

One-Time Fees for

Network Acess 1G and 10G

Non-Profit Organizations NPO-1 $0.5M-$0.99M 1,300.00$ 108.33$ 2,461.00$ 7,946.00$

(Most Recent IRS Form 990, Line 12

Gross Revenue) NPO-2 $1.0M-$4.99M 2,000.00$ 166.66$ 2,461.00$ 7,946.00$

NPO-3 $5.0M-$9.99M 8,800.00$ 733.33$ 2,461.00$ 7,946.00$

NPO-4 $10.0M-$49.99M 12,800.00$ 1,066.66$ 2,461.00$ 7,946.00$

9. Second and subsequent 1 Gbps connections are available for $100.00 a month for sites requiring ISP service at an existing location. The first WiscNet service will be provided at existing contracted rates. The second and any subsequent 1 Gig connections would be called WiscNet on BadgerNet Connect +1 and would be

$100.00 a month.

7. BCN Customer or Agency purchasing WiscNet on BadgerNet Service agrees that WiscNet can act on their behalf and agrees to the Letter of Agency (LOA). LOA will be provided prior to order placement.

6. WiscNet may provide, configure, maintain and manage the CPE device providing Layer 2 and Layer 3 Internet services to BCN Customers and Agencies of WiscNet on BadgerNet. (One-time fees in Table 1)

1. Customers ordering WiscNet services must be WiscNet members (https://www.wiscnet.net/)

3. All annual fees quoted include transit to the full capacity transport link

4. Billing is on a monthly basis

5. Remote Site means a qualified BCN Customer may have both a (1) BCN transport connection with WiscNet on BadgerNet Service(s) that serves its primary location (or its primary wide area network) and also (2) additional fully-provisioned and monitored BCN transport connections

8. The entities listed in Table 2 below are existing WiscNet BCN Customers on current multi-year WiscNet contracts that extend into the term of a WiscNet on

BadgerNet contract and who has agreed pricing would not match Table 1 pricing and are grandfathered through their respective terms.

2. Pricing assumes 1 port at each speed

WiscNet on BadgerNet (7/8/2019) 8 of 31

DocuSign Envelope ID: F71A7447-1881-486F-B64F-E0976A3FA3BADocuSign Envelope ID: BF1D2384-41F2-4A3C-96A7-2F65B81EAECC

AT&T Internet Service on BadgerNet

SCHOOL DISTRICT

ENROLLMENT

MONTHLY RATE

Bandwidth

(Mb)

1 - 199 $700 6

200 - 399 $750 10

400 - 599 $800 20

600 - 799 $850 50

800 - 999 $900 100

1,000 - 1,199 $950 150

1,200 - 1,399 $1,000 155

1,400 - 1,599 $1,050 200

1,600 - 1,799 $1,100 250

1,800 - 1,999 $1,150 300

2,000 - 2,499 $1,250 350

2,500 - 2,999 $1,350

3,000 - 3,999 $1,500

4,000 - 4,999 $1,650

5,000 - 5,999 $1,800

6,000 - 9,999 $2,000

10,000 - 19,999 ICB

20,000 - 49,999 ICB

50,000+ ICB

CATEGORY C: BROADBAND INTERNET SERVICE ONLY FOR SCHOOL DISTRICT'S BY

ENROLLMENT (Purchase of Category A or B Service is required)

MIS (Managed Internet Service) Pricing for Non-Erate BadgerNet Customers

(Purchase of Category A or B Service is required)

(added March 2017)

DocuSign Envelope ID: F71A7447-1881-486F-B64F-E0976A3FA3BADocuSign Envelope ID: BF1D2384-41F2-4A3C-96A7-2F65B81EAECC

Per Month

Pricing Bandwidth (Mb) Per Month Pricing

40.00$ 400 440.00$

50.00$ 450 $495.00

75.00$ 500 550.00$

100.00$ 550 605.00$

150.00$ 600 660.00$

165.00$ 622 684.20$

170.00$ 700 770.00$

220.00$ 800 880.00$

275.00$ 900 999.00$

330.00$ 1000 1,100.00$

385.00$ 1,000+ ICB

MIS (Managed Internet Service) Pricing for Non-Erate BadgerNet Customers

(Purchase of Category A or B Service is required)

(added March 2017)

DocuSign Envelope ID: F71A7447-1881-486F-B64F-E0976A3FA3BADocuSign Envelope ID: BF1D2384-41F2-4A3C-96A7-2F65B81EAECC

CATEGORY C: BROADBAND INTERNET SERVICE (Asymmetrical)

BROADBAND ACCESS PRICING

Product Circuit Type Service Provider Bandwidth MRC * NRC (Modem) * Pro Install CPE

Minimum

Payment

Period Early Termination IP Type

AT&T ADSL - Dynamic IP DL-ADSL AT&T 768k x 384k $37.50 Included Not available P 12 $200.00 1 Dynamic

AT&T ADSL - Dynamic IP DL-ADSL AT&T 1.5M x 384k $39.00 Included Not available P 12 $200.00 1 Dynamic

AT&T ADSL - Dynamic IP DL-ADSL AT&T 3.0M x 512k $40.00 Included Not available P 12 $200.00 1 Dynamic

AT&T ADSL - Dynamic IP DL-ADSL AT&T 6.0M x 768k $41.00 Included Not available P 12 $200.00 1 Dynamic

AT&T ADSL - Static IP DL-ADSL AT&T 1.5M x 384k $40.00 Included Included P 12 $200.00 1 Static

AT&T ADSL - Static IP DL-ADSL AT&T 1.5M x 384k $54.00 Included Included P 12 $200.00 5 Static

AT&T ADSL - Static IP DL-ADSL AT&T 3.0M x 512k $55.00 Included Included P 12 $200.00 5 Static

AT&T ADSL - Static IP DL-ADSL AT&T 6.0M x 768k $56.00 Included Included P 12 $200.00 5 Static

Additional block of 13 IP addresses DL-ADSL AT&T $25.00 $0.00 +13 Static

Product Circuit Type Service Provider Bandwidth MRC * NRC (Modem) * Pro Install CPE

Minimum

Payment

Period Early Termination IP Type

AT&T Broadband - Dynamic IP Broadband AT&T 768k x 384k $37.50 Included Included R 12 $200.00 1 Dynamic

AT&T Broadband - Dynamic IP Broadband AT&T 1.5M x 384k $39.00 Included Included R 12 $200.00 1 Dynamic

AT&T Broadband - Dynamic IP Broadband AT&T 3.0M x 512k $40.00 Included Included R 12…