B08_Solicitation_Attachment_1_Statement_of_Work_(SOW__SOO__PWS)_Water_Heaters_and_Pumps.pdf
PDF 58 KB Posted
- Attached to
- USFWS fish hatchery heat pumps & water heaters
- Solicitation number
- 140F1B24Q0011
About this file
This document is a Statement of Work (SOW) for a federal contract opportunity to provide two in-line heaters and two heat pumps for the Ouray National Fish Hatchery.
The SOW specifies the technical requirements for the in-line heaters and heat pumps, including power, temperature, flow rate, and installation details. The in-line heaters must be a minimum of 18kW, with digital readouts, adjustable temperature control, and a maximum flow rate of 15gpm. The heat pumps must be electrically powered, have a maximum flow rate of 50gpm, and operate within an ambient air temperature range of 55-75°F and a minimum water temperature of 12°C.
The related federal contract opportunity, Solicitation Number 140F1B24Q0011, is being issued by the Department of the Interior Fish and Wildlife Service to purchase these heat pumps and water heaters for the Ouray National Fish Hatchery.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
SECTION C
STATEMENT OF WORK
TO PURCHASE
WATER HEAT SYSTEM
AT
OURAY NATIONAL FISH HATCHERY
I. GENERAL CONDITIONS
A. Work includes providing four water heat units. The units will be installed by the station at Ouray National Fish Hatchery near Randlett, Utah, for fish production.
II. PROJECT REQUIREMENTS
A. The items covered by this document are intended to represent a complete system furnished by one supplier / manufacturer, unless otherwise noted, of all the essential components.
1. In-Line Heater (2 units)
a. 18kW minimum
b. Digital readout with accuracy within 1ºF
c. Water target maximum temperature: 22 ºC
d. Adjustable temperature control
e. Long life expectancy flow tube with good conductance, such as titanium
f. Maximum flow of 15gpm
g. Electrical grid powered
h. Installed inside building
i. Optima Compact Plus, or equivalent
2. Heat Pump (2 units)
a. Will be connected to reservoirs
b. Electrical grid powered
c. Maximum flow of 50gpm
d. Ambient air conditions: 55-75 ºF
e. Water temperature minimum: 12 ºC
f. Water target maximum temperature: 22 ºC
g. Installed inside building
END OF STATEMENT OF WORK
14 May 2024
File details come from the government source that posted it. Updated .