B08 ATTACHMENT 0007 Light and Medium Phosphates Coating SOW.pdf
PDF 60 KB Posted
- Attached to
- M67 Propelling Charges
- Solicitation number
- W52P1J-22-R-0018
About this file
This document contains a statement of work for light and medium phosphate coatings requirements and a related federal contract opportunity notice for M67 propelling charges. The statement of work specifies that offerors must submit detailed written coating procedures for government approval prior to production. Preproduction validation panels are required in various coating configurations to demonstrate meeting performance tests. The federal contract opportunity is an indefinite delivery indefinite quantity contract with five one-year ordering periods for M67 propelling charges. The U.S. Army Contracting Command-Rock Island will make a best value source selection on behalf of the Office of the Project Manager Combat Ammunition Systems to qualified national technology and industrial base producers.
View the file
Other files
Show all 23
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
STATEMENT OF WORK: LIGHT AND MEDIUM PHOSPHATE COATING REQUIREMENT
(a) The following requirements regarding light and medium phosphate coatings are applicable to this statement of work and any resultant contract in addition to those requirements set forth in specification TT-C-490F Amendment 3.
(b) Paragraph 3.2.1 of TT-C-490F Amendment 3 refers to "Procedure Approval." Prior to production, a detailed written procedure identifying cleaning, pretreatment and painting processes shall be submitted to the procuring agency for approval. Process time, temperature, chemical concentrations, process controls and acceptance criteria and any other pertinent details shall be listed for each step of the application process. The procedure shall include the manufacturer and exact proprietary designation of any material used as well as any equipment used in the application of the procedure. The complete procedure which demonstrates ability to pass the performance tests contained herein is to be signed by a company official prior to its submittal for approval. Deviation from the approved procedure is not permitted without written approval from the procuring agency (see Supplementary Requirements for Non-CARC).
(c) Paragraph 3.2.2 of TT-C-490F Amendment 3 refers to “Preproduction Validation Panels”. The test panels shall be the same substrate as will be used in production. For parts or panels requiring epoxy primer and urethane/epoxy topcoat finishes (CARC paint systems), the preproduction panels or parts three phosphated only; three phosphate plus primer; three phosphate, primer, and topcoat. For parts or panels requiring Alkyd topcoat finishes, the preproduction panels or parts three phosphated only; three phosphate plus topcoat.
File details come from the government source that posted it. Updated .