B08_ATCH_2_DRAWING_0709001_Redacted.pdf

NOTES:

1. DIMENSIONS IN BRACKETS ARE IN MILLIMETERS.

2 KEVLAR/NYLON CABLE, FABRICATED IN ACCORDANCE

WITH SPECIFICATION HIF-C-07.

3. APPLY MARKS AROUND THE FULL CIRCUMFERENCE OF

THE CABLE USING BLACK PERMANENT INK.

4. LOCATE AND APPLY MARKS TO THE CABLE WITH THE

CABLE TENSIONED TO 25 5 POUNDS.

5 THE LOCATION OF EACH BAND PATTERN IS DETERMINED AT:

THE CENTER OF THE BAND FOR SINGLE BANDS.

THE CENTER OF THE SPACE BETWEEN THE BANDS FOR

DOUBLE BANDS.

THE CENTER OF THE MIDDLE BAND FOR TRIPLE BANDS.

6 THE CENTER OF THE 100-FOOT TRIPLE BAND WITH FLAG

BANDS PATTERN (DETAIL C) IS THE BREAK POINT BETWEEN

ADJACENT PATTERN CYCLES.

7 AFTER MARKING, APPLY A COMMERCIAL WAX (BOWAX

#1018 OR EQUAL) TO THE CABLE SO AS TO FILL THE

SPACES BETWEEN THE NYLON FIBERS OF THE OUTER

JACKET.

8 SEE PROCUREMENT CONTRACT FOR EFFECTIVE CABLE

LENGTH.

9 ATTACH CLIP TO CABLE IN ACCORDANCE WITH CABLE

END INSTALLATION, DRAWING NO. 0353001.

10 SUGGESTED SOURCE OF SUPPLY:

63 [1.6] µm THIRD ANGLE PROJECTION

METRIC CONVERSION

DECIMAL [mm]

X.XX.XXX

.X X

X.X.XX

SURFACE FINISH:

ANGLES

1/16FRACTIONS

UNLESS OTHERWISE SPECIFIED DIMENSIONS

ARE IN INCHES AND INCLUDE PLATING

DECIMAL TOLERANCE [mm] = 0.13

= 1.6 = 0.8 = 0.38

.XXX .005

.XX .015

.X .030

- DO NOT SCALE THIS DRAWING -

UNITED STATES DEPARTMENT OF THE INTERIOR

GEOLOGICAL SURVEY - WATER RESOURCES DIVISION

PARTS LIST

NOTESDESCRIPTION

NO. REQ'D

APPROVALS

REVISION-DESCRIPTIONLTR. DATE

DATE

SCALE

TITLE

MATERIAL

SIZE DWG. NO. REV.

ITEM SH. QTY.

NO. SIZE DRAWING/PART NO. REQD.

DRAFTING CHECK:

DRAWN BY:

DESIGN CHECK:

DESIGN APPROVAL:

D

1/2

ERMA NILSSON

ROB MYERS

JOHNNY WHEAT

JOHNNY WHEAT

KEVLAR WADING TAGLINE

0709001NONE -

8-26-19 9-17-19 9-17-19 9-17-19

REVISED AND REDRAWN

8-26-19

REVISED AND REDRAWN

PLACE END CLIP HERE

100-FT TRIPLE BAND

WITH FLAG BANDS

100-FT TRIPLE BAND

WITH FLAG BANDS

ARRANGEMENT OF CLIP, LEADER, EFFECTIVE LENGTH, AND TRAILER

THIS VIEW NOT TO SCALE, HORIZONTAL AND VERTICAL DISTANCES NOT IN PROPORTION

100-FT TRIPLE BAND

WITH FLAG BANDS

SEE DETAIL C

10-FT DOUBLE BAND

SEE DETAIL B

2-FT SINGLE BAND

SEE DETAIL A SEE DETAIL C

100-FT TRIPLE BAND

WITH FLAG BANDS

ARRANGEMENT OF SINGLE, DOUBLE, AND TRIPLE BANDS

ONE SET OF BANDS SHOWN OF A CONTINOUS, REPEATING PATTERN

THIS VIEW NOT TO SCALE, HORIZONTAL AND VERTICAL DISTANCES NOT IN PROPORTION

NEXT

PATTERN CYCLE

PREVIOUS

PATTERN CYCLE

DETAIL A

40 PLACES EACH PATTERN CYCLE

DETAIL B

9 PLACES EACH PATTERN CYCLE

DETAIL C

1 PLACE EACH PATTERN CYCLE

WAX, MICROCRYSTALLINE, LAMINATING GRADEA/RBOWAX 1018 1

8 120 6 [3048 152]

LEADER

120 6 [3048 152]

TRAILEREFFECTIVE LENGTH

50 SPACES X 24 .12 [610 3.0] EACH SPACE

ONE PATTERN CYCLE

.60 .12 [15.2 3.0]

LOCATION POINT, SINGLE BAND

.60 .12 [15.2 3.0] .60 .12 [15.2 3.0]

.60 .12 [15.2 3.0]

LOCATION POINT, DOUBLE BAND

2.75 .25 [69.8 6.3]

.60 .12 [15.2 3.0]

.60 .12 [15.2 3.0]

.60 .12 [15.2 3.0]

LOCATION POINT, TRIPLE BAND WITH FLAG BANDS

.60 .12 [15.2 3.0]

.60 .12 [15.2 3.0]

2.75 .25 [69.8 6.3] 2.75 .25 [69.8 6.3]2.75 .25 [69.8 6.3]

5 6