Attchment 2 - Salient characteristics - Ultrasonic Parts Washer.docx

ARIZONA AIR NATIONAL GUARD, 162nd WG, ARMAMENT FLIGHT Salient Characteristics Sheet (Ultrasonic Parts washer)

Salient Characteristics: The ultrasonic clean, rinse and dryer system shall meet or exceed the following:

Provide an Ultrasonic Power Corporation Industrial Ultrasonic Cleaning System, Model 7028 – 204 Gallon Console with Filtration and Sparger/Weir System or an equal system which meets or exceeds the following salient characteristics:

a. A portable, self-contained, ultrasonic cleaning system

b. Minimum internal tank dimension: 70" (L-R) x 28" (F-B) x 24" Depth

c. Tank Construction: industrial grade stainless steel

d. Insulated tank

e. Double wall all stainless steel construction

f. Stainless Steel lid, 2 piece (Approximate)

g. Sweep circuitry

h. Adjustable power intensity control

i. Sparge/Weir System

j. Work Rest heavy duty stainless steel caps

k. Stainless steel parts baskets (minimum of 4)

l. Single point electrical connection for 240 VAC (216V – 264V), 50/60 Hz, single phase

Provide a Ultrasonic Power Corporation Industrial Rinse System, Model 7028 – 204 Gallon or an equal system which meets or exceeds the following salient characteristics:

a. A portable, self-contained, companion rinse system

b. Minimum internal tank dimension: 70” (L-R) x 28" (F-B) x 24" Depth

c. Tank Construction: industrial grade stainless steel

d. Insulated tank

e. Stainless steel lift of lid

f. Work Rest heavy duty stainless steel caps

g. Digital thermostat control for operating temperature

h. Stainless Steel lid, 2 piece (Approximate)

i. Single point electrical connection for 240 VAC (216V – 264V), 50/60 Hz, single phase

Provide an Ultrasonic Power Corporation Companion Dryer, Model 50-26-821, UP 7028 (204 Gallon) or an equal system which meets or exceeds the following salient characteristics:

a. A portable, self-contained, recirculation hot air dryer for parts manually transported through the drying process

b. Minimum internal tank dimension: 70” (L-R) x 28" (F-B) x 28" Depth

c. Tank Construction: industrial grade stainless steel

d. Double wall all stainless steel construction

e. Insulated tank

f. Stainless steel lift off lid

g. Work Rest heavy duty stainless steel caps

h. Digital thermostat control for operating temperature

i. Single point electrical connection for 240 VAC (216V – 264V), 50/60 Hz, single phase

Additional required salient characteristics:

a. All tank components shall be made of Stainless steel ultrasonic cleaning system shall be compatible with Brulin Formula 815GD and provide ultrasonic cleaning and agitation for cleaning of components. A separate self-contained stainless steel tank for clean water rinse and a separate self-contained parts dryer system. The ultrasonic washer must have variable sweep frequency capability and the ultrasonic watt density shall not exceed 40 watts/gallon. Adjustable heat and time settings for both tanks are required.

REFERENCE / PHOTOS:

The project is located at Bldg. 33, Room 20 on the 162nd Wing, Air National Guard Base installation, Tucson, Arizona.

New Ultrasonic Location SES Gear

Bldg. 33 Floor Plan:

Bldg. 33 SES Panel

Bldg. 33 SES Panel

Graymills Front-Load Washer

-----End Salient Characteristics Sheet-----image2.jpeg image3.jpeg image4.jpeg image5.jpeg image6.jpeg image1.jpeg