Attachments - B558 HPO.pdf

LOUISIANA AIR NATIONAL GUARD

122ND CAMP BEAUREGARD

BUILDINGS 558

Main Gate

B558

122 Air Support Operations Squadron Pineville, LA

122 Air Support Operations Squadron Pineville, LA

B558

B558 – Health Performance Optimization Proposed Location

Health Performance Optimization - Bay Approximate Dimensions

70’ - 0”

Openings Doors: Replace existing roll up service doors and install new roll up service insulated doors Windows: Remove all existing exhaust fans and louvers; install new windows/frames

B558 – Health Performance Optimization Proposed HVAC system install and lighting layout *Subject to change per Contractor calculations/proposal

Existing Panel 120/240V, Single Phase Upgrade existing panel to accommodate light switches, fixtures, and packaged unit.

New Shut Off Switch

New Unit

Underground electrical Approx. 30 LF

Remove exhaust fan, utilize opening for ductwork and enclose

Install three way light switch at approx. locations

PRODUCT DATA

Arrays

19000

DIMMING & CONTROLS

High flux linear LED modules: 80+ CRI, CCT: 3500K, 4000K or 5000K.

Constant current LED power supplies: power factor > 0.9, THD < 20%, universal voltage 120-277v, 347-480v available.

24000

Chain or gripple toggle lock, surface mount brackets or internal surface mount, pendant mount, threaded rod, custom mounting available.

15,528 to 16,045

18,563 to 19,109

MOUNTING

20,800 to 21,493

24,181 to 25,006

12,609 to 13,029

SYSTEM SPECIFICATIONS

11,208 to 11,179

122 to 12621000

126 to 130

124 to 128

124 to 127

LED Gym

Linear High Bay 4'

Project

Type:

LHB4

Approved By:

Wattage

APPLICATIONS

Delivered Lumens LPWPart ID

11000 132

Gymnasiums, hockey and ice arenas, athletic clubs, multi-purpose rooms, recreational facilities, multi-sport courts, industrial applications.

CONSTRUCTION

.040" white pre-painted aluminum housing, 2x2 grid powder coated wire cage with diffused acyrlic lens. All fixtures are manufactured in the USA.

13000

16000 125

121 to 1254

Ordering Information

30000

41000

11000, 13000

16000, 19000

21000, 24000

Delivered lumens vary per lens option and color temperature. Refer to lumen values on page 2.

29,736 to 30,726

35K

Temperature rated from -34ºC to 50ºC (-30ºF to 122ºF), service life >

100,000 hours (L90), CSA listed, DLC QPL options, BAA compliant.

(5) year product warranty. Consult factory for extended warranties.

119 to 123

RATINGS & WARRANTY

0-10v dimming, dim to off or dim by line voltage. Wireless control from a switch, PC or handheld device, A/B array switching, emergency driver battery back-up option.119 to 123

35,683 to 36,872

1st Source LED

Arrays

24000

Bay Series

EM = Emergency Driver

FH = # 630 Fixture Hanger

3 = 347v (Consult Factory)

U = Universal 120-277v

Voltage

4 = 480v (Consult Factory)

WC = 2x2 Grid Wire Cage

Series CCT

BAY LHB4

Family

Linear

High Bay 4'

Part ID

4 50K

40K

Lens-Wire Cage

DAC-WC

DAC =Diffused Acylic Lens

24,181 to 25,006

41000

30000

P = Pendant (Specify .5 or .75)

Accessories

D0 = Dim to Off

P = Plug (Specify NEMA)

DLV = Dim by Line Voltage

D10 = Dim to 10%

C = Cord (Specify Length)

121 to 125

Mounting Options

CC = Chain or Cable Mount

Dimming and Control Options

MS = Motion Sensor

TRB = Threaded Rod Bracket AB = A/B Switching

Wireless Controls

GRP = Gripple Toggle Hanger

EQ = Seismic Anti Sway Clips

SM = Surface Mount

ISM = Internal Surface Mount

1stsourcelight.com • 1730 Industrial Drive, Auburn, CA 95603 • Phone 530-887-1110 • Fax 530-887-0807 • sales@1stsourcelight.com rev 6-18

4 Foot 3-Array Pictured

5000K

200w

200w

LPW

21,493

24,181

25,006

18,563

19,109

20,800

12,609

13,029

15,528

16,045

Delivered Lumens

11,208

11,179

4000K

5000K

4000K

CCT

4000K

5000K

4000K

5000K

4000K

5000K

4000K

5000K

125w

125w

150w

150w

85w

85w

Wattage

100w

100w

BAY-LHB4-4-21000

BAY-LHB4-4-24000

BAY-LHB4-4-24000

Wattage & Lumen Values

Model

BAY-LHB4-2-11000

BAY-LHB4-2-11000

BAY-LHB4-3-19000

BAY-LHB4-3-19000

BAY-LHB4-4-21000

BAY-LHB4-2-13000

BAY-LHB4-2-13000

BAY-LHB4-3-16000

BAY-LHB4-3-16000

Fixture Dimensions

Model-Arrays

BAY-LHB4-1

BAY-LHB4-2

BAY-LHB4-3

BAY-LHB4-4

BAY-LHB4-5

BAY-LHB4-6

36,872

5000K

300w

300w

200w

250w

250w

4000K

5000K

4000K

29,736

30,726

35,683

25,006

BAY-LHB4-5-30000

BAY-LHB4-5-30000

BAY-LHB4-6-41000

BAY-LHB4-6-41000

BAY-LHB4-4-24000

Control dimming and daylight harvesting from a PC, handheld device or kinetic switch. Enocean and Zigbee protocols or Blue Tooth Mesh options available. Pre-commisoned at factory.

46.25" x 6.07" x 4.47"

46.25" x 8.77" x 4.47"

46.25" x 12.07" x 4.47"

46.25" x 15.36" x 4.47"

46.25" x 18.66" x 4.47"

46.25" x 21.95" x 4.47"

Length x Width x Depth

Delivered lumens are based on reports produced in accordance with IES photometric testing protocol using a single representative test. Production units may vary from the values reported by up +/- 5%.

Wireless Controls

5000K

1stsourcelight.com • 1730 Industrial Drive, Auburn, CA 95603 • Phone 530-887-1110 • Fax 530-887-0807 • sales@1stsourcelight.com

INSULATED HEAVY-DUTY ROLLING SERVICE DOOR

INDUSTRY LEADING

COMMERCIAL & INDUSTRIAL SOLUTIONS

THERMAL PROTECTION.

HEAVY-DUTY DESIGN.

AIR INFILTRATION PROTECTION.

STORMTITE™

STORMTITE™ INSULATED HEAVY-DUTY ROLLING SERVICE DOOR

Cover image: Model 625, finish in Tan

Image above: Model 625, finish in Tan

Standard features at a glance

Maximum width∆ 30'4" (9246 mm)

Maximum height∆ 28'4" (8636 mm)

Curtain 24-gauge galvanized steel front 24-gauge galvanized steel back

Slat profile Flat, insulated, type F-265i

Insulation Foamed-in-place, CFC and HCFC-free polyurethane

R-value* 7.7 (1.35 W/Msq)

STC Rating 21

Finish Gray, Tan, Brown or White

Hood 24-gauge galvanized steel

Wind load 20 psf

Standard mounting Face-of-wall

Operation Chain hoist

Standard spring 20,000 cycle

Weatherseals Bottom, exterior curtain-side guide, interior hood baffle

Guides Three structural steel angles;

PowderGuard® Premium finish with black powder coat

Bottom bar Primed steel with vinyl weatherseal

Lock Padlockable chain keeper

Warranty 24-month limited; 3 years/20,000 cycles limited on Overhead Door™ door and operator system (when purchased together) Some options may affect clearance dimensions.

† Wind Load options available to meet:

FBC - Florida Building Code TDI - Texas Department of Insurance Dade - Miami-Dade Building Code Compliance Office

* R-value is a measure of thermal efficiency. The higher the R-value the greater the insulating properties of the door. Overhead Door Corporation uses a calculated door section R-value for our insulated doors.

∆ Maximum height and width are independent of each other and may vary based on slat profile, material and gauge.

Options

• Air infiltration package that meets requirements of IECC code, which includes: guide cover and cap;

dual brush guide seal, lintel seal, bottom astragal

• Electric operator (RHX®, RSX®, RMX®) or crank operation

• Bottom sensing edge; sloping bottom bar

• Galvanized steel bottom bar angles and guides;

insulated guides

• Between-jamb mounting

• Stainless steel or aluminum slats

• High-usage package

• High-wind load option (FBC, TDI, Dade)†

• Weatherseal for interior side guide

• Lintel seal

• Cylinder lock; slide bolts

• Exhaust ports

• Vision lites with uniformly spaced openings of 5/8"x 3" (16 mm x 76 mm) or 1" x 10" (25.4 mm x 254 mm)

• PowderGuard® Premium powder coat paint finish in approximately 200 standard colors, or color-matched to specification;

• PowderGuard® Zinc and PowderGuard® Textured finishes

• Special application doors:

− Oversized doors to 1500 ft2. (139.4 m2) − Combination doors with grilles and/or with full or partial standard, perforated or fenestrated slats − Spark-resistant doors, craneway doors, pass doors

STORMTITE™ MODEL 625

3overheaddoor.com

Style, function and thermal efficiency.

When overall performance and thermal efficiency are as essential in a rolling service door as are versatile good looks, the Stormtite™ 625 meets specification and exceeds all expectations. This heavy-duty door features insulated slats in a variety of materials − galvanized steel, stainless steel or aluminum − and offers optional wind load protection up to 170 psf. Designed to fit openings up to 30’4” wide and 28’4” high (9246 mm x 8636 mm) and offered with a broad range of product options, the versatility and functionality of the Stormtite™ 625 ensures that your design requirements will be met with ease, functionality and style.

Slat data

Finish options

Actual colors may vary from brochure due to fluctuations in the printing process. Always request a color sample from your Overhead Door™ Distributor for accurate color matching.

5/

8"

3/4"

Foamed-in-Place Polyurethane Foam (CFC-free)

F-265i slat

R-value* 7.7 (1.35 W/Msq) U-value .13 Smoke generation = 10 Flame spread = 5

STC = 21

Slats are galvanized and painted, stainless steel (specify finish) or aluminum (specify finish).

Gauges reflect front slat; back slat is 24-gauge on steel and stainless steel; 22-gauge on aluminum.

Slat Opening width Standard Optional F265i Thru 30'4"

(9246 mm)

24 ga. 22, 20, 18 ga.

22, 20 ga. ss .040" alum., 18 ga.

White finish. Installation and service: Overhead Door Company of Concord™

Finish details

Standard polyester base coat Two-coat system with polyester based top coat.

PowderGuard® Premium powder coat Weather resistant polyester powder coat available in approximately 200 colors; custom color match and EZ Clean treatment options available.

PowderGuard® Zinc finish Zinc enriched powder coat provides excellent corrosion protection that outperforms both hot dipped and cold galvanized steel. Color selection from approximately 200 powder coat colors;

custom color match also available.

PowderGuard® Textured finish Industrial textured powder coat provides a thicker, more scratch resistant coat for added product protection.

Colors

White Tan BrownGray

The IECC listed air infiltration option meets code requirements for an air infiltration rating lower than than 1.0 cfm/ft2 for rolling steel doors.

This superior perimeter sealing system includes:

• Guide cover and cap

• Dual brush guide seal

• Lintel seal

• Bottom astragal

©2018 Overhead Door Corporation. Overhead Door and Stormtite are trademarks and the Red Ribbon logo is a registered trademark of Overhead Door Corporation. All other trademarks are property of their rightful owners. Consistent with our policy of continuing product improvement, we reserve the right to change product specifications without notice or obligation. C900-073 10/18

Gray finish. Installation and service: Overhead Door Company of Huntsville™

Architect's Corner A resource for architects, containing comprehensive technical and resource materials to support your project, including drawings and specifications for commercial doors.

www.overheaddoor.com

2501 S. State Hwy. 121 Bus., Suite 200, Lewisville, TX 75067 1-800-929-DOOR • sales@overheaddoor.com overheaddoor.com

INDUSTRY LEADING

COMMERCIAL & INDUSTRIAL SOLUTIONS

The original, innovative choice for unequalled quality and service.

Overhead Door Corporation pioneered the upward-acting door industry, inventing the first upward-acting door in 1921 and the first electric door operator in 1926. Today, we continue to be the industry leader through the strength of our product innovation, superior craftsmanship and outstanding customer support, underscoring a legacy of quality, expertise and integrity. That’s why design and construction professionals specify Overhead Door™ products more often than any other brand. Our family of over 400 Overhead Door™ Distributors across the U.S. and Canada not only share our name and logo, but also our commitment to excellence.

SITE PHOTOS

Building 558

Proposed HVAC Unit Location

Power Source for HVAC - Upgrade existing panel Existing panel – 120/240V, Single Phase

Repair/replace exposed insulation

Remove two existing fans and two louvers and replace with windows.

Replace roll up service doors with insulated roll up service doors