Attachment MD96996C - S419 Salvajor Standard Spec Sheets 11S.pdf

A Trough Conveying and Food Waste Collecting System

Widely accepted in areas that restrict the use of food waste disposers.

Job: Item No.:

Model S419

Recirculated Water used by the system for scrapping reduces water and sewer costs. The Trough Collector consumes only 2 gallons of fresh water per minute.

Trough Water Volume with the Trough Collector is 70 gallons per minute. This volume swiftly propels food waste down the trough and into the Collector with no additional hand movement, leaving both hands free for high-volume scrapping. The Trough Collector will let you keep up with large conveyor or flight dishmachines.

Design Flexibility is offered by the Collector as troughs can turn corners. The Collector’s high water volume allows the design of wider, longer troughs allowing you to soak problem dishes or add gusher heads to pre-rinse compartmental trays.

HydroLogic Water Saving Control has an adjustable timer with user friendly LCD readout.

Typical trough layout

Typical trough layout is 12" wide and 10' in length with up to 2 optional gusherheads spaced 3' - 4' apart to accommodate 2 operators.

Trough CollectorTM

14 7/8" (37.78)

4 3/16" (10.60)

4 9/16" (11.62)

4 9/16" (11.62)

LEFT SIDE VIEW

32 7/8" (83.50) adjustable to 35 7/8" (91.12)

18 1/8" (46.10)

11 5/8" (29.45)

FRONT VIEW

22" (55.88) miniumum clearance overhead for basket removal

Air Gap

One basket provided with unit Additional basket recommended at additional cost Scrap Basket dimensions 18 9/16" dia. x 131/4" high (47.2) dia. x (33.7) high

We suggest the use of rubber Gusher Heads along the trough for scrapping and pre-flushing. One per operator, two max.

(Optional at additional cost) 1 5/16" diameter hole required in trough.

Fabricated trough (not furnished), must have matching flange to attach to trough connection.

(See detail "C")

11/2" plumbing fittings and valve (See detail "B")

3/4" pipe and valve (See detail "B")Removable Trough Collector top can be rotated in 15˚ increments.

Hot and cold shutoff valves

1/2” NPT

Control Panel can be mounted on left or right.

1/2” conduit knockout electrical connection

Water Diffuser furnished. 2" diameter hole required in back of trough. (See detail "A")

7 7/16" (18.82) to

10 7/16" (26.44)

1 7/16" (3.65)

UTILITY

CONNECTION

UTILITY

CONNECTION

UTILITY

CONNECTION

Tank drain

2” NPT

NOTE: Dimensions in parenthesis are in centimeters

TOP VIEW

22 1/2" (57.15)

12 1/4" (31.11)

11 1/4" (28.58) ø19 1/4" (ø48.84)

TABLE CUTOUT DETAIL

12 1/4" (31.12)

6 1/2" (16.51) ø20" (ø50.75)

TOP VIEW

22 1/2" (57.15)

12 1/4" (31.11)

11 1/4" (28.58) ø19 1/4" (ø48.84)

TABLE CUTOUT DETAIL

12 1/4" (31.12)

6 1/2" (16.51) ø20" (ø50.75)

Recirculation Plumbing (Not Furnished)

Plumb per diagram for correct operation

11/2"

3/4"

1 5/16" dia.

hole

5 1/2" (14.0)

R 1/4" (R.63)

4 " (10.2)

8 3/4"(22.2) 5 3/4"(14.6)

Trough Section

2" dia.

hole

3" min.

depth Diffuser

Locknut Gasket

DETAIL "A" _ WATER DIFFUSER

• Trough must have a minimum 3" depth with a fall of at least 3/32" per running foot towards the collector.

• Minimum 6" clearance is required from the trough to the wall to allow room for recirculation piping.

• 22" minimum clearance overhead for basket removal.

An additional basket is recom-mended at additional cost.

Detail "A" - Water Diffuser Detail "C" - Trough Connection Flange

Detail "B" - Recirculation

Trough Collector™ Model S419

90°

15°

The control can be mounted on either side of the Collector using existing mounting bracket, mounting holes, fasteners and wiring for dish flow to the left or dish flow to the right.

The Trough Collector top can be rotated in 15 degree increments to ease common installations as well as improve design flexibility without the need of costly tank modifications.

Upon request, the Trough Collector top may be shipped separately to an alternate location for fabrication.

2" Tank Drain (Piping not furnished)

All connections are to be made by qualified personnel who will observe all local and national codes.

Slots 3/8" x 1"

(.95 x 2.54) 9 7/8" (25.08)

2 3/4" (6.99)

11" (27.94)

4" (10.16)

8" (20.32)

5" (12.70)

5/8" (1.59)

5" (12.70)

# 980104 Optional Remote Control Mounting Bracket

UTILITY

CONNECTIONS

The control can be mounted remotely using optional remote mounting bracket. Note: Additional field wiring is necessary.

• Incoming electrical connection ➔ factory wired control panel

• Incoming hot/cold water connection ➔ factory plumbed water harness

• Drain connection ➔ 2” NPT

Trough Collector™ Model S419

CONSTRUCTION

n Tank - 2 Piece Stainless Steel n Adjustable Legs - Stainless Steel n Control Panel - Stainless Steel n Salvage Basin - High Impact Polymer n Scrap Basket - High Impact Polymer

ELECTRICAL

n Pre-wired NEMA 4 Control Panel n Watertight Conduit /Fittings n Separate Component Grounding n Thermally Protected Motor n Safety Line Disconnect n 24 Volt Safety Circuitry

PLUMBING

n Corrosion Resistant Components n Automatic Water Blender n Unions n Check Valves n Incoming Water Valves n Non-clogging Pump Design n Pump Intake Screen

ACCESSORIES

Remote Start-Stop Remote Mounting Bracket Correctional Package Control Mounting Bracket Additional Scrap Basket Rack Guide Full Stainless Cover Gusher Heads

UTILITIES REQUIRED

1. Electric service

2. 3/4" hot and cold water supply and reduce to 1/2" at connection.

3. 2" tank drain.

(Specifications subject to change without notice.)

SAMPLE SPECIFICATIONS

Unit shall be a Salvajor Trough Collector, a complete scrapping, pre-flushing and food waste collecting system with recirculating water as manufactured by Salvajor.

Model S419,____Volts, 60Hz, ___Phase.

Furnished with a pre-wired control panel and stainless steel NEMA 4 watertight enclosure.

115V 208V 230V, 60 Cycle, 1 Phase 208V 230V 460V, 60 Cycle, 3 Phase

Pump Motor ¾ HP

VOLTAGES AVAILABLE

(SPECIFY EXACT OPERATING VOLTAGE)

FULL LOAD AMPS

(SPECIFY EXACT OPERATING VOLTAGE)

1 PHASE 3 PHASE

115V 208V 230V 208V 230V 460V 11 5.5 5.5 3.2 3 1.5

Trough CollectorTM

Model S419 Specifications

4530 East 75th Terrace Kansas City, MO 64132-2081, USA

816.363.1030 I Toll Free: 1.800.725.8256 I Service: 1.888.725.8256 I Fax: 1.800.832.9373 sales@salvajor.com I service@salvajor.com I www.salvajor.com

Printed in USA Form No. S419 (05-18)

Manufacturers of Commercial Food Waste Solutions - Since 1944