Attachment II - Pre-qualifications Requirements_Reflective Cracking Indoors Phase VII Construction-Replacement.pdf

Attachment II – Pre-Qualification Requirements

1. Corporate Experience - To be qualified for this procurement, the Offeror must demonstrate the following:

a. Successful completion of three (3) or more projects of similar size, scope and complexity to the draft Statement of Work, within the past six years. Projects of similar size, scope and complexity are those valued at one hundred-thousand-dollars ($100,000) or more which included work involving FAA Item P-401 Hot Mix Asphalt.

b. For each project listed in response to 1(a), the Offeror must provide at a minimum:

(i.) Project title and location;

(ii.) Length of contract time and date completed;

(iii.) Total contract cost;

(iv.) Brief description of the project;

(v.) Types and value of contract work executed by the Offeror;

(viii.) Project reference information (i.e., Client company name and name, title, address, phone number and email address of client contact).

The forms to be used for each submission of Corporate Experience can be found on pages 3-4 of this document. The Offeror may expand the forms to fit the experience, but the total response to the Corporate Experience requirement must not exceed 10 pages.

2. Capability Statements - In addition to the projects listed above, the Offeror must provide:

a. Summary of your firm’s capability in meeting the FAA’s requirement as described in Attachment I - Draft Statement of Work.

b. Confirmation of capability to be able to perform the work in

Attachment I, Draft Statement of Work, with no less than 15% of its own workforce. Work includes cost of material and equipment.

c. Offerors must also provide the firm’s business classification size, along with the appropriate Small Business Administration (SBA) certification if applicable.

d. Capability of securing a sub-contractor

(i.) This project will require specialized asphalt paving. In order to be considered acceptable for this factor, you will have to submit a subcontracting plan for how you plan on accomplishing this work. The subcontractor must have experience in projects involving asphalt paving at non-general aviation airports, including paving to FAA Construction Specifications found in Advisory Circular 150/5370-10, or in the construction of research test pavements, including subbase and aggregate base construction and surface paving to FAA Construction Specifications found in Advisory Circular 150/5370-10.

e. Capability of providing a Field Superintendent (FS) who possesses the following:

(i.) Knowledge of state and federal occupational safety and health regulations.

(ii.) Has completed, at minimum, 10 hours of formal educational training in occupational safety and health, and must have current certification in an OSHA10 sponsored or approved course in Occupational Safety and Health Standards for the Construction Industry. FS to submit a copy of their OSHA 10 certification;

(iii.) Six years of recent work experience, performed within the past six years, in a supervisory position overseeing at least two projects with a total value of, at minimum, one hundred-thousand-dollars ($100,000) and involving multiple disciplines/trades; and

(iv.) If this requirement is awarded, it will be a requirement for the Field Superintendent to submit a copy of their current certification in an OSHA sponsored or approved course in Occupational Safety and Health Standards for the Construction Industry.

Capability statements must not exceed five (5) pages in length.

Corporate Experience – Building 300 Floor Renovation

Company Name: ______________________________________________

Project Title: ______________________________________________

Project Location: ___________________________________________

Contract Start and Completion Dates: ___________ and ___________ Duration (in months): __________

Contract Type: ___________________________________

Contract Award Amount: ______________

Contract Cost Including Change Orders: ___________________

Type and value of contract work executed by the Offeror:

Brief Project Description:

Did Project involve multiple major building disciplines/trades (reply to 1a, please describe):

Special Project Requirements or Constraints:

Client Name and Address:

Point of Contact (whether the Prime Contractor, Superintendent, or Site Safety and Health officer/SSHO):

Name and Title:

Phone Number(s):

Email Address: _