Attachment D - Tank Drawing.pdf
PDF 248 KB Posted
- Attached to
- POLYETHYLENE BRINE TANKS - CHARLESTON
- Solicitation number
- 5400030122
- Issued by
- Richland County, South Carolina
About this file
This is a technical tank drawing attachment for a polyethylene brine or calcium chloride storage tank procurement for Charleston, South Carolina. The drawing specifies an ASM TK 5500CP X 108 HD/NAT 1.5 tank configuration with a 120-inch external diameter and 18-inch threaded/vented manway with 15-inch access. The tank assembly includes seven components: a protective plastic cover, PVC encapsulated fitting assembly, UFO load fitting, two PVC ball hose adapters with EPDM seals, 18-inch mushroom head vent assembly, and two separate tank assemblies (5500CC X 120 and 5500CP X 108 models). The drawing indicates that external piping must be independently supported, only base fittings remain installed at shipment per SII procedure, and tanks with foam insulation will have an increased diameter of 4-6 inches.
All dimensions are specified in inches on a nominal basis subject to change without notice, with a 3 percent tolerance applied to all rotational molded parts. The document is revision A, sheet 1 of 1, and was drawn by BH. No specific pricing, quantities for procurement, delivery dates, or contractual terms are identified in this technical drawing attachment.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Solicitation.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
*ALL EXTERNAL PIPING MUST BE INDEPENDENTLY SUPPORTED.
*ONLY BASE FITTINGS TO BE LEFT INSTALLED AT TIME OF SHIPMENT PER SII PROCEDURE.
*TANKS ORDERED WITH FOAM INSULATION WILL HAVE AN INCREASED DIAMETER OF 4-6 INCHES.
10.0
120.0
173.2
18" THREADED/VENTED
MANWAY W/ 15" ACCESS
R45.0
8.0 10.0
90°
0°
45°135°
180°
225°
270°
315°
5 6
3 4
BRINE OR CALCIUM CHLORIDE
STORAGE TANK
ITEM
NO. QTY. PART NUMBER DESCRIPTION SHOWN TANK
CONFIG.
7 1 00000175 PROTECTIVE PLASTIC 4000-9500(120") NO YES
6 1 34700630 ASM FTG PVC 2IN ENCAP SLB BLTD/EPDM YES YES
5 1 1070000N93808 ASM FITTING UFO LD/NAT 2IN PVC/EPDM YES YES
4 2 34200015 FTG PVC 2IN BH SXT EPDM YES YES
3 1 1035000N97802 ASM VENT 18IN MUSHROOM HD/BLK YES YES
2 1 5640000N97401 ASM TK 5500CC X 120 HD/NAT 1.5 YES YES
1 1 5660000N97401 ASM TK 5500CP X 108 HD/NAT 1.5 YES YES
CUSTOMER: CUSTOMER NO:
ALL DIMENSIONS ARE IN INCHES, NOMINAL, & SUBJECT TO CHANGE WITHOUT NOTICE.
ALL DIMENSIONS ON ROTATIONAL MOLDED PARTS ARE SUBJECT TO A 3% TOLERANCE.
ReleasedSTATUS:
SHEET
ASM TK 5500CP X 108
HD/NAT 1.5
REVISION
A
ENG. ID.
TITLE:DO NOT SCALE DRAWN BY
BH
PART NO.
| Sheet1 |
| Drawing View1 |
| Drawing View2 |
File details come from the government source that posted it. Updated .