The file's text, extracted by GovTribe without its formatting.
July 10, 2014, Rev 3 Schedule of Pricing Maintenance and Repair of Research Vessel STURGEON
OPTION
SPEC. REF.
| 4.1 |
| Hauling, Blocking and Launching |
| 6.1 |
| Hull High Pressure Wash and Visual Inspection |
| 6.2 |
| Underwater Hull Coating |
| 6.3 |
| ABS Survey - Load Line |
| 6.4 |
| Clean and Inspect All Tanks and Voids |
| 6.5 |
| Ultrasonic Gauging of Hull |
| 7.1 |
| Inspect Propulsion Shafts and Propeller in Place |
| 7.2 |
| Inspect, Clean, and Refurbish Propellers |
| 7.3 |
| Remove Propulsion Shafts and Inspect |
| 7.4 |
| Bow Thruster Inspection and Maintenance |
| 8.1 |
| Diagnose Keel Cooler Leaks |
| 8.1a |
| Repair Keel Cooler Leaks |
| 8.2 |
| Inspect and Coat Anchor Chain |
| 8.3 |
| Repair Wet Lab Deck Drains |
| 8.4 |
| Install a Helm Pump Emergency Steering System In Lazarette |
| 8.5 |
| Install Limit Switches on Steering System |
| 8.7 |
| Install Heated Windows in Pilot House |
| 8.8 |
| Replace Existing Vinyl Floor Tiles |
| 8.9 |
| Paint Exterior Hull and Rub Rails |
| 8.10 |
| Prepare and Paint Railings on 01 Deck |
| 8.11 |
| Install Ship’s Name as Welded Letters |
| 8.12 |
| Renew Coatings in Lazarette |
| 8.13 |
| Replace 120 V Furuno Radar |
| 8.14 |
| Install New Ceiling System |
| 8.15 |
| Install Propulsion Shaft Stuffing Box Sensors |
| 8.16 |
| Replace Transducers and Repair Transducer Bilge and Valving |
| 8.17 |
| Flush Water Tank Coating Repairs |
| 8.18 |
| Install Cabling for Fisheries Environment for Electronic Data (FEED) System |
| 8.20 |
| Provide Support for Inclining Test |
| 8.21 |
| Install Marport Hydrophones on Hull |
| OPTION |
| Tbd |
| Install Hydrophone Housings and Hydrophones |
TOTAL
LABOR RATES
Shipyard Labor: The Contractor’s fully loaded man-hour rate will be used for negotiating change orders, if necessary. The contractor agrees that the number of man hours included in its price proposal for such modifications shall include only direct production man-hours. For these purposes, direct production man-hours are for skilled labor at the journeyman level expended in direct production, inspection, repair, or installation as exemplified by the following functions:
140G0121R0021 Attachment E Release of Claims
Foremen and Shop Supervisors General Labor Rigging Staging/scaffolding Welding Machinists (inside and outside) Fire Watch Burning Brazing Abrasive cleaning/blasting Tank cleaning Carpentry Electrical Work Lagging Ship-fitting Painting Sheet-metal Work Pipefitting Diesel Mechanics Marine Chemist Nondestructive Testing Navigation/Communications Electronics Hydraulic Crane and winch inspection and maintenance Material handling & Warehousing
Project Management & Engineering: Project Management & Engineering support functions shall be considered to be included in the Offeror’s fully loaded rate for direct production man-hours. Examples of support functions include:
Planning Quality Assurance Testing Engineering Design Lofting
| G14PS00428 |
| Attachment D Schedule of Pricing |
Amendment 0002
