Attachment D - Bulletin15.pdf

BULLETIN 15 (Publication 35)

Qualified Products List for Construction Posted:

9/14/2026 3:52:55PM

Bulletin 15 Description

Bulletin 15 is a listing of prequalified materials that are eligible for use on Department construction projects. The purpose of Bulletin 15 is to provide contractors, consultants, Department personnel, manufacturers, suppliers, and others with easy access to a listing of products whose manufacturers have demonstrated the capability to perform in accordance with Department specifications and to be accepted by certification on PennDOT construction projects. Contractors are ultimately responsible to the Department for the performance of all materials and products supplied to, installed or placed on, and/or incorporated into Department construction projects, notwithstanding the listing of any such materials and products in Bulletin 15

Bulletin 15 is available to the public in two formats: as a searchable database and as a pdf document.

Bulletin 15 listings are organized in the format of Publication 408, Specifications. A Bulletin 15 listing includes an assigned supplier code, the supplier name and address, the product name/type/use, and reference number. The reference number (Ref. No.) is the Product Evaluation control number under which the item was tested and approved (the first four digits are the year of submission). The absence of a reference number indicates that the item was approved prior to the implementation of the current numbering system. For some precast and prestressed items, the date of the approval letter from the Structural Materials Section is provided. For traffic items, the Traffic Division "Certificate of Approval (COA)" number or date is provided.

Bulletin 15 listings will indicate if a Producer is on a reduced Level of Certification (i.e. at a certification level other than Level 1). Producers are assigned a Level of Certification, based on their ability to comply with the specifications. Material provided by Producers listed in Bulletin 15 is approved for use only in its intended application(s).

Bulletin 15 listings will also indicate by notation if a product has received either a Provisional Approval or a Conditional Approval. These approval categories usually involve products that require further monitoring. The Department has the right to remove any provisionally approved or conditionally approved manufacturer and/or product from Bulletin 15 immediately.

§ Provisionally approved products are typically products approved under provisional specifications.

§ Conditionally approved products are products approved under manufacturer’s specifications. PennDOT may supplement or modify the manufacturer’s specifications as needed using special provisions.

Posted:

9/14/2026 3:52:55PM

PennDOT utilizes a web-based Product Evaluation Application process for approving and listing products in Bulletin 15, Qualified Products List for Construction. PennDOT does not charge a fee for submitting a Product Evaluation Application or for the review and approval process.

Step 1 of Product Evaluation Application Process

PennDOT’s Product Evaluation Application system requires a username and password to access. To request a username and password, follow these steps:

1. Go to www.ecamms.penndot.pa.gov

2. Click on REGISTER.

3. Select BUSINESS PARTNER.

4. Complete the Organization Information, User Profile Information, and Access Selection tabs.

5. Near the bottom of the Access Selection tab, select Submit applications for new product approvals under eCAMMS Access.

After submitting the request, it may take up to 10 business days for you to receive a username and password to access the system.

• PennDOT’s Construction Specifications: Publication 408

• PennDOT’s primary website: https://www.pa.gov/agencies/penndot.html

Step 2 - Product Evaluation Application Process

1. Go to https://www.ecamms.penndot.pa.gov/ and enter the password and username supplied by PennDOT.

2. From the Product Evaluation menu, select My Product Evaluation.

3. Click the Add New menu, select My Product Evaluation.

4. A manufacturer/fabricator will need to complete the Applicant, Manufacturer, Product, Certification, QC Plan & Attachments, and the Sign and Submit sections in the application. PennDOT will not start reviewing an application until it is signed and submitted. The application can be saved and resumed at a later time.

5. A manufacturer/fabricator will need to submit one application for each product. Use the copy feature to transfer company information from one application to another.

6. Applicant tab: Please provide additional company contacts ( The QC representative and company principal need to be two different employees).

7. Manufacturer tab:For the Manufacturing Facility Type / Business Type, select the most applicable type. If there isn't a close match, select All Other Manufacturers.

8. Product tab: Provide the product name, purpose, and description. Any field with an asterisk ('*') must contain a selection.

9. Certification tab: for Summary of Product Compliance, select whether the product fully meets a PennDOT Pub 408 Construction Specification, does not fully meet, or no applicable standard exists Please provide both the applicable Publication 408 and Bulletin 15 sections.

Bulletin 15 Material Approval Process https://www.ecamms.penndot.pa.gov https://www.ecamms.penndot.pa.gov https://www.ecamms.penndot.pa.gov https://www.ecamms.penndot.pa.gov https://www.ecamms.penndot.pa.gov https://www.ecamms.penndot.pa.gov https://www.ecamms.penndot.pa.gov https://www.ecamms.penndot.pa.gov https://www.ecamms.penndot.pa.gov https://www.pa.gov/content/dam/copapwp-pagov/en/penndot/documents/public/pubsforms/publications/pub_408/pub%20408.pdf https://www.pa.gov/content/dam/copapwp-pagov/en/penndot/documents/public/pubsforms/publications/pub_408/pub%20408.pdf https://www.pa.gov/agencies/penndot.html https://www.pa.gov/agencies/penndot.html https://www.pa.gov/agencies/penndot.html https://www.pa.gov/agencies/penndot.html https://www.pa.gov/agencies/penndot.html https://www.pa.gov/agencies/penndot.html https://www.pa.gov/agencies/penndot.html https://www.pa.gov/agencies/penndot.html https://www.pa.gov/agencies/penndot.html https://www.pa.gov/agencies/penndot.html https://www.pa.gov/agencies/penndot.html https://www.pa.gov/agencies/penndot.html https://www.pa.gov/agencies/penndot.html https://www.ecamms.penndot.pa.gov/ https://www.ecamms.penndot.pa.gov/ https://www.ecamms.penndot.pa.gov/ https://www.ecamms.penndot.pa.gov/ https://www.ecamms.penndot.pa.gov/ https://www.ecamms.penndot.pa.gov/ https://www.ecamms.penndot.pa.gov/ https://www.ecamms.penndot.pa.gov/ https://www.ecamms.penndot.pa.gov/ https://www.ecamms.penndot.pa.gov/ https://www.ecamms.penndot.pa.gov/ https://www.ecamms.penndot.pa.gov/ https://www.pa.gov/content/dam/copapwp-pagov/en/penndot/documents/public/pubsforms/publications/pub_408/pub%20408.pdf https://www.pa.gov/content/dam/copapwp-pagov/en/penndot/documents/public/pubsforms/publications/pub_408/pub%20408.pdf https://www.pa.gov/content/dam/copapwp-pagov/en/penndot/documents/public/pubsforms/publications/pub_408/pub%20408.pdf

Posted:

9/14/2026 3:52:55PM

The following entities are eligible to apply for Bulletin 15 approval:

§ Manufacturers

§ Steel Epoxy Coaters or Galvanizers

§ Wood Treaters

§ Steel, Aluminum or Timber Fabricators

§ Machine Shops

§ Paint Shops

§ Precast/Prestressed Concrete Producers

§ Cement Plants or Terminals

§ Pozzolan Providers

§ Bituminous Terminals or Refineries

§ Bridge & Structural Products

10.QC Plan & Attachments tab: A QC Plan and a QC Supplement form is required for each application. A blank copy of the QC Supplement form is available to download and fill-out. For manufactured products, an independent testing report is required to be submitted to show compliance with PennDOT's Pub 408 specifications. Independent test reports are required to be no older than five years at the time of application submission. You will not be able to sign and submit the application until all of the required attachments have been uploaded.

The required documents are marked with an '*'. PennDOT limits individual attachments to 10 MB each.

The manufacturing facility must be operational and able to produce the product submitted for evaluation.

The Product Evaluation Application requires company information, product description and technical information, and Quality Control plan information.

The Product Evaluation Application also requires specialized testing and certification for some manufacturers/companies, as summarized in the table below:

The following entities are eligible to apply for Bulletin 15 approval:

§ Structural Steel Coatings

§ Geotextiles

§ ITS Devices

§ Pavement Markings

§ Pipe

§ Roadside Safety Hardware

§ Sign Sheeting

§ Sound Barriers

§ Traffic Signals

§ Work Zone Devices

Posted:

9/14/2026 3:52:55PM

During the product evaluation/approval process, index properties (including tolerances or ranges for these index properties) may be established for applicable products or product lines as a means to determine consistent compliance with the PennDOT specification requirements. The established index properties (and tolerances or ranges) will be considered inclusive of all associated sampling, material, and test method variability (i.e., ASTM/AASHTO precision estimates, manufacturing/product variability, shelf life effects, or any other deviations).

When established, these index properties (and tolerances or ranges) are to be used by manufacturers in determining acceptable QC test results for these index properties. PennDOT will also use these established index properties (and tolerances or ranges) for future quality assurance verification or acceptance testing.

Index properties (including tolerances or ranges) submitted by manufacturers are subject to review and acceptance by PennDOT LTS. Once the final index properties (and tolerances or ranges) have been established and approved by PennDOT, the manufacturer must adhere to producing consistent quality materials within these index property limits (tolerances or ranges). Proposed changes to the approved index properties may require the submission of a new Product Evaluation Application to PennDOT by the manufacturer.

Posted:

9/14/2026 3:52:55PM

Suppliers, distributors, or companies that outsource the manufacturing of their products, or private label products that are manufactured by other companies are typically not eligible to submit a Product Evaluation Application (for approval and listing in Bulletin 15) unless the outsourcing company performs all required quality control testing and verifications and assumes full responsibility for the performance of the product. Non-eligible companies may obtain products or material from any approved source listed in Bulletin 15, for resale to pre-qualified contractors.

Eligible firms who need assistance completing the application may contact NPETS Support via phone at (717) 425-5816 or e-mail at RA-pdBOPDNPETS@pa.gov mailto:RA-pdBOPDNPETS@pa.gov mailto:RA-pdBOPDNPETS@pa.gov mailto:RA-pdBOPDNPETS@pa.gov mailto:RA-pdBOPDNPETS@pa.gov mailto:RA-pdBOPDNPETS@pa.gov mailto:RA-pdBOPDNPETS@pa.gov mailto:RA-pdBOPDNPETS@pa.gov

Posted:

9/14/2026 3:52:55PM

Bulletin 15 Levels of Certification

Material provided by Producers listed in Bulletin 15 is approved for use only in its intended application(s). Producers will be assigned a Level of Certification, based on their ability to comply with the material specifications. Producers will initially be assigned a LEVEL 1 certification. Poor material performance or material quality issues may dictate a reevaluation of a producer’s certification level.

The Levels of Certification are defined as follows:

* Certain Bulletin materials require supplemental or alternate forms of certification, refer to the next section, Bulletin 15 Material Certification.

Levels of Certification for

Bulletin 15 Producers

Producer Material Shipment Procedure

Producer Additional

Requirements

Level 1 Standard Certification

Ship on Certification with Form CS-4171*

None

Level 2 Standard Certification - Reduced

Ship on Certification with Form CS-4171*

See below

Level 3 Lot Approval Certification

Ship only after Material Lot Approval using Modified Certification, with Form CS-4171*

See below

Suspension or Removal

In accordance with the State’s Contractor Responsibility Program:

Producer may be suspended or removed from Bulletin 15 for any of the reasons stated in the Bulletin 15 Preface, regardless of Producer certification level.

Failure of Producer to advance above Certification Level 3 will result in PennDOT’s initiating action for suspension or removal from Bulletin 15.

Posted:

9/14/2026 3:52:55PM

§ LEVEL 1 (Standard Certification)

- Initial Level of Certification typically issued to Bulletin 15 listed Producers.

- Material is produced and tested in accordance with the Producer's approved QC Plan.

- No known material performance or quality issues exist that warrant a reduced level of certification.

- Material is shipped on certification using Form CS-4171.

§ LEVEL 2 (Standard Certification - Reduced)

- Reduced Level of Certification issued to Bulletin 15 listed Producers who have exhibited minor/moderate material performance or quality issues.

- Producer is required to work with PennDOT on submission of an improvement plan that may include, but is not limited to, any or all of the following items: a revised QC Plan, a failure analysis/action plan to assess why failures are occurring and how to prevent these failures from occurring in the future, correlation testing between in-house and independent lab testing to assist with validating results.

- Material is produced and tested in accordance with the improvement plan approved by PennDOT.

- Material is shipped on certification using Form CS-4171.

§ LEVEL 3 (Lot Approval Certification)

- This Level of Certification is issued to Bulletin 15 listed Producers who have exhibited major material performance or quality issues.

- Producer is required to work with PennDOT on an improvement plan as defined in Level 2.

- Material cannot be shipped to projects using the standard CS-4171 certification process.

- Producer must arrange for independent, in-plant acceptance testing (IPAT) that will be conducted side-by-side with "in-house" Producer testing at the designated frequencies in the revised QC plan. IPAT will be at the Producer's expense. PennDOT's Laboratory Testing

Section (LTS) must approve the Producer's proposed IPAT provider, before it begins.

- Any material lot to be used on a project must be tested and approved by the IPAT as meeting the required PennDOT specification prior to shipment to the project.

- Each material lot meeting the specification may be shipped to a project using a modified certification process as follows: submit, to both the Project Representative and LTS, Form CS-4171 along with a signed letter from the IPAT (on their official letterhead) indicating that the material lot meets testing and specification requirements.

- Correlate results from parallel "in-house" Producer testing and IPAT testing, and submit to the LTS on a monthly basis.

Posted:

9/14/2026 3:52:55PM

Bulletin 15 Material Certification

Form CS-4171 is completed by the manufacturer, fabricator, or producer (Producer) of Bulletin material provided to the project. The Producer maintains the original Form CS-4171 and provides a copy of Form CS-4171 with each direct shipment to the project. Producers must maintain all component certifications for purchased Bulletin materials, at their place of business for a period of not less than 3 years from the date of the last shipment to the project. Certification files must be available for inspection by the Department.

When a Producer sells a Bulletin 15 material to a distributor/supplier (Shipper), the Producer provides a copy of Form CS-4171 with each delivery to the Shipper. When a Shipper provides Bulletin 15 material directly to the project, the Shipper completes and signs a new Form CS-4171 and provides a copy with each direct shipment to the project. The Shipper will maintain the copy of the Producer’s Form CS-4171 that they have received. Shippers must maintain a certification file for purchased Bulletin materials to provide an audit trail to the Producer. Certifications for purchased Bulletin materials must be maintained at their place of business for a period of not less than 3 years from the date of the last shipment to the project. Certification files must be available for inspection by the Department.

The Contractor must ensure that Form CS-4171 is received for each project shipment of Bulletin material. The Contractor must submit to the Representative a properly completed and signed copy of Form CS-4171 for each project shipment. The Contractor should not incorporate any Bulletin material in the work until certification arrives on the project, unless otherwise approved by the Representative. Payment for material will be withheld until proper certification documentation is received. The Contractor must retain Form CS-4171 for a period of not less than 3 years from the date of the last project shipment and make files available for inspection and verification by the Department.

§ Epoxy coated or galvanized reinforcement steel requires the submission of supplemental certification Form CS-4171C (Epoxy Coating or Galvanizing Facility) and/or Form CS-4171F (Fabrication Facility).

A completed CS-4171(DS), “Certificate of Compliance” with Digital Signature must be submitted electronically with each shipment of material to the project. Form CS-4171 must be properly signed by a legally responsible company official. For manufacturers supplying products directly to distributors, a hand-signed copy of CS-4171, can still be supplied.

Certain Bulletin materials require the submission of supplemental CS-4171 certification in addition to Form CS-4171, to provide traceability of materials in multi-step manufacturing processes.

§ Certification of locally approved non-Bulletin materials requires submission of Form CS-4171LA(DS)

§ Structural steel, aluminum, or precast/prestressed concrete products, produced in a Bulletin 15 approved facility with an on-site state inspector or a state representative, must be stamped with an approved inspection stamp at the plant and certified with a Form CS-4171.

Certain Bulletin materials require a form of certification other than the Form CS-4171, as identified in the particular material specification.

§ Section 701 and 702 materials require a properly completed vendor bill of lading.

https://www.pa.gov/content/dam/copapwp-pagov/en/penndot/documents/public/pubsforms/forms/cs-4171c.xlsx https://www.pa.gov/content/dam/copapwp-pagov/en/penndot/documents/public/pubsforms/forms/cs-4171c.xlsx https://www.pa.gov/content/dam/copapwp-pagov/en/penndot/documents/public/pubsforms/forms/cs-4171c.xlsx https://www.pa.gov/content/dam/copapwp-pagov/en/penndot/documents/public/pubsforms/forms/cs-4171c.xlsx https://www.pa.gov/content/dam/copapwp-pagov/en/penndot/documents/public/pubsforms/forms/cs-4171f.pdf https://www.pa.gov/content/dam/copapwp-pagov/en/penndot/documents/public/pubsforms/forms/cs-4171f.pdf https://www.pa.gov/content/dam/copapwp-pagov/en/penndot/documents/public/pubsforms/forms/cs-4171f.pdf https://www.pa.gov/content/dam/copapwp-pagov/en/penndot/documents/public/pubsforms/forms/cs-4171f.pdf https://www.pa.gov/content/dam/copapwp-pagov/en/penndot/documents/public/pubsforms/forms/cs-4171%20ds.pdf https://www.pa.gov/content/dam/copapwp-pagov/en/penndot/documents/public/pubsforms/forms/cs-4171%20ds.pdf https://www.pa.gov/content/dam/copapwp-pagov/en/penndot/documents/public/pubsforms/forms/cs-4171%20ds.pdf https://www.pa.gov/content/dam/copapwp-pagov/en/penndot/documents/public/pubsforms/forms/cs-4171%20ds.pdf https://www.pa.gov/content/dam/copapwp-pagov/en/penndot/documents/public/pubsforms/forms/cs-4171%20ds.pdf https://www.pa.gov/content/dam/copapwp-pagov/en/penndot/documents/public/pubsforms/forms/cs-4171%20ds.pdf https://www.pa.gov/content/dam/copapwp-pagov/en/penndot/documents/public/pubsforms/forms/cs-4171.pdf https://www.pa.gov/content/dam/copapwp-pagov/en/penndot/documents/public/pubsforms/forms/cs-4171.pdf https://www.pa.gov/content/dam/copapwp-pagov/en/penndot/documents/public/pubsforms/forms/cs-4171.pdf https://www.pa.gov/content/dam/copapwp-pagov/en/penndot/documents/public/pubsforms/forms/cs-4171la%20ds.pdf https://www.pa.gov/content/dam/copapwp-pagov/en/penndot/documents/public/pubsforms/forms/cs-4171la%20ds.pdf https://www.pa.gov/content/dam/copapwp-pagov/en/penndot/documents/public/pubsforms/forms/cs-4171la%20ds.pdf https://www.pa.gov/content/dam/copapwp-pagov/en/penndot/documents/public/pubsforms/forms/cs-4171la%20ds.pdf https://www.pa.gov/content/dam/copapwp-pagov/en/penndot/documents/public/pubsforms/forms/cs-4171la%20ds.pdf https://www.pa.gov/content/dam/copapwp-pagov/en/penndot/documents/public/pubsforms/forms/cs-4171la%20ds.pdf https://www.pa.gov/content/dam/copapwp-pagov/en/penndot/documents/public/pubsforms/forms/cs-4171la%20ds.pdf

Posted:

9/14/2026 3:52:55PM

Contractors are responsible to the Department for the conformance to the specifications of all products and materials that the contractors select from Bulletin 15 and incorporate into the work on Department construction projects. Products may be monitored by the Department via inspection, sampling, and/or testing for quality assurance, verification, and acceptance purposes to ensure the quality of the material used is maintained.

Product sample failures will be evaluated at PennDOT’s monthly Bulletin 15 failure committee meeting. Supplier test history will be reviewed to determine whether corrective action or root cause analysis by the supplier is warranted. If so, companies will be contacted individually with specifics regarding the requested information or other action(s) required. Failure to make corrections and consistently provide material meeting our specifications can and will result in reduction in certification level and may ultimately lead to Bulletin 15 removal.

Posted:

9/14/2026 3:52:55PM

Plant Verification (PV) Samples

Producers and manufacturers of bituminous materials, cement, glass beads, roadway paint, and structural steel paint are required to submit Plant Verification (PV) samples to the Department. Producers are advised to keep a sufficient quantity of material from each production lot or batch to serve as retain sample(s) to perform additional testing as requested or directed by the Department.

In the event of a material PV Sample failure, the Department will require that the supplier’s retained sample be split and one split be re-tested by the supplier and the results forwarded to the Department for review and the other split be provided to the Department. The Department will in turn, perform re-testing on the provided retained sample and compare both sets of test results.

Based on the material use and type of test failure, the Department will determine if the failure represented by the Department testing is significant enough to result in unacceptable performance, unanticipated maintenance or reduced service life, or other conditions which may warrant rejection and replacement. Significant material failures such as these may result in the Department notifying the supplier to take any or all of the following actions:

1. Identify and isolate the failed material to ensure that the failed material is not shipped to any PennDOT projects.

2. If the failed PV lot has already been shipped, immediately notify all brokers and distributers to whom the material was sent of the failure with instructions to recall the failed lot of material which was supplied to any PennDOT projects.

3. Supply PennDOT with a project list and the accompanying documentation (Form CS-4171 Certificate of Compliance or bill of lading) for any of the failed material that was delivered to PennDOT projects by the facility.

4. Submit an action plan to the Department within 30 days of notification to demonstrate how material and processes are to be controlled in the future to ensure material consistently meets PennDOT specification requirements.

Posted:

9/14/2026 3:52:55PM

Bulletin 15 Removal Actions

A manufacturer and/or product(s) may be removed from Bulletin 15 for any of the following reasons:

§ Any action or inaction that may affect the quality of the product, the integrity of the test results, or the implementation of the Quality Control plan.

§ Failure of the product to meet appropriate specifications.

§ Failure to submit or adhere to a Quality Control Plan.

§ Falsification of information provided on the Certificate of Compliance Form CS-4171, CS4171B, CS-4171C, CS-4171F or CS4171LA.

§ Failure to supply samples, test results, or other information requested by the Department.

§ Failure to notify the Bulletins Administrator at (717) 783-9673 within ten (10) days of any change in company contact information (name, address, or phone number) or change in product information (name, formula, quality control plan, or manufacturing process).

§ Commission of embezzlement, theft, forgery, bribery, falsification or destruction of records, making false statements or receiving stolen property.

§ Commission of fraud or a criminal offense or other improper conduct or knowledge or approval of, or acquiescence in these activities by an affiliate, officer, employee or other individual or entity associated with either obtaining, attempting to obtain or performing a public contract or subcontract.

Acceptance of the benefits derived from the conduct shall be deemed evidence of knowledge, approval or acquiescence.

§ Violation of Federal or State antitrust statutes.

§ Violation of a State or Federal law regulating campaign contributions.

§ Violation of a State or Federal environmental law.

§ Violation of a State or Federal law regulating hours of labor, minimum wage standards or prevailing wage standards; discrimination in wages; or child labor violations.

§ Violation of the Workers’ Compensation Act (77 P. S. § § 1-2626).

§ Violation of a State or Federal law prohibiting discrimination in employment.

§ Suspension or debarment by the Commonwealth or an agency thereof or an agency of another state or by an agency or department of the Federal

Posted:

9/14/2026 3:52:55PM

government.

§ Three or more occurrences of being declared ineligible for a contract.

§ Unsatisfactory performance including failure to comply with the terms of a Commonwealth contract or subcontract including:

§ Willful failure to perform in accordance with the terms of one or more contracts, or a history of failure to perform, or of unsatisfactory performance of one or more contracts.

§ Failure to complete the work in the time frame specified in the contract.

§ Being declared in default on prior work or project.

§ Failure to submit documents, information or forms as required by contract.

§ Making false statements or failing to provide information or otherwise to cooperate with the contracting agency, the Office of State Inspector

General or other Commonwealth authorities.

§ Discrimination in violation of laws or regulations in the conduct of business.

§ Providing false or misleading information to the Office of State Inspector General, Office of the Budget, the Department of the Auditor General, the

Office of Attorney General, the Treasury Department, the Board of Claims, or other tribunal or court, the Department, or a representative of an agency as part of any investigation, audit, program review, certification, contract bids or proposals, applications or claims for payment. This information includes:

§ Financial statements.

§ Nondiscrimination forms.

§ Affidavits or statements of compliance with prevailing wage statutes.

§ Product descriptive literature and documents submitted in connection with claims for payment made or litigation against Commonwealth agencies.

§ Other acts or omissions indicating a lack of skill, ability, capacity, quality control, business integrity or business honesty.

Posted:

9/14/2026 3:52:55PM

Section Updates: How to Notify PennDOT of a Company or Product Name Change

Product Name Change Notification For consideration by the Pennsylvania Department of Transportation, email the following information to RA-pdBulletin15@pa.gov

* 1. Manufacturer's Name

* 2. Bulletin 15 Supplier Code

* 3. Old Product Name

* 4. New Product Name

* 5. Effective Date

* 6. Statement certifying that it is the same product with the same formulation, performance, limitations, and is manufactured at the same facility.

* 7. A statement certifying that you are the authorized representative.

* 8. Please attach updated Product Data Sheets to the email message.

* 9. Include your name, email address, and phone number.

`10. Include postal mailing addresses for both corporate and manufacturing facilities if different.

Product Removal Notification mailto:RA-pdBulletin15@pa.gov mailto:RA-pdBulletin15@pa.gov mailto:RA-pdBulletin15@pa.gov mailto:RA-pdBulletin15@pa.gov mailto:RA-pdBulletin15@pa.gov mailto:RA-pdBulletin15@pa.gov mailto:RA-pdBulletin15@pa.gov

Posted:

9/14/2026 3:52:55PM

Section Updates: How to Notify PennDOT of a Company or Product Name Change

Product Removal Notification To notify the Pennsylvania Department of Transportation that a product is no longer being manufactured, please email the following information to RA-pdBulletin15@pa.gov

` 1. Manufacturer's Name

` 2. Product Name

` 3. Bulletin 15 Supplier Code

` 4. Effective Date

` 5. Is the product sold to distributors and is there a remaining supply?

` 6. A statement certifying that you are an authorized representative of the product.

` 7. Include your name, email address, and phone number.

Company Name Change Notification For consideration by the Pennsylvania Department of Transportation, email the following information to RA-pdBulletin15@pa.gov

` 1. Company Name to Be Updated

` 2. New Company Name

` 3. Bulletin 15 Supplier Code(s)

` 4. Effective Date

` 5. Statement certifying that the products are materially the same, with the same formula, performance, limitations, and manufactured at the same physical location.

` 6. Statement that key personnel have been retained under the new company name.

` 7. Include your printed name, date, signature, email address, phone number, mailing addresses for both corporate office and manufacturing facility if separate locations.

mailto:RA-pdBulletin15@pa.gov mailto:RA-pdBulletin15@pa.gov mailto:RA-pdBulletin15@pa.gov mailto:RA-pdBulletin15@pa.gov mailto:RA-pdBulletin15@pa.gov mailto:RA-pdBulletin15@pa.gov mailto:RA-pdBulletin15@pa.gov mailto:RA-pdBulletin15@pa.gov mailto:RA-pdBulletin15@pa.gov mailto:RA-pdBulletin15@pa.gov mailto:RA-pdBulletin15@pa.gov mailto:RA-pdBulletin15@pa.gov mailto:RA-pdBulletin15@pa.gov mailto:RA-pdBulletin15@pa.gov

Posted:

9/14/2026 3:52:55PM

Section 106.02: Project-Specific Locally Approved Materials

106.02 Project-Specific Locally Approved Materials

In accordance with Publication 408, Section 106.02 (a) 2.c, the following Pub 408 Sections contain construction materials that are defined as Project-Specific, Locally Approved Materials.

PennDOT does not require manufacturers of Project-Specific, Locally Approved Materials to submit a Product Evaluation Application (CS-4170) for approval and listing of their material(s) in Bulletin 15. Project-Specific, Locally Approved Materials are not listed in Bulletin 15.

Contractors proposing to use materials that meet the specification requirements must list them on Form CS-200 (Source of Supply-Materials) and submit them for local approval by the Representative (i.e. at the District or project level). Refer to the corresponding Pub 408 Sections for specification and documentation requirements.

* Section 420.2(d): Asphalt Edge Restraints

* Section 659.2(c): Aggregate Surface Topping for HFST

* Section 802: Topsoil Furnished and Placed

* Section 806.2(a, b): Temporary & Permanent Rolled Erosion Control Products (RECPs)

* Section 860.2(a): Inlet Filter Bag

* Section 867: Compost Filter Sock

* Section 868: Compost Blanket and Compost Filter Berm

Posted:

9/14/2026 3:52:55PM

Section 212: Geotextiles

212.5 Geosynthetic Clay Liners Last Revised: 9/14/2026

For projects let on or after October 24, 2025 Standard Special Provision c02230 ITEM 9212-0101 Geosynthetic Clay Liner

Product Ref. No.Name DMSCF

AGRU America, Inc., 500 Garrison Road, Georgetown, SC 29440 https://agruamerica.com/AGRUA 15 Geosynthetic Clay Liner (GCL) GeoClay WN36-7-03S 2025-049QNo https://docs.penndot.pa.gov/Public/Bureaus/BOCM/BOCM_MTD_LAB/Publications/PUB_35/Supporting/c02230-ITEM9212-0101-GEOSYNTHETICCLAYLINER.pdf https://docs.penndot.pa.gov/Public/Bureaus/BOCM/BOCM_MTD_LAB/Publications/PUB_35/Supporting/c02230-ITEM9212-0101-GEOSYNTHETICCLAYLINER.pdf https://docs.penndot.pa.gov/Public/Bureaus/BOCM/BOCM_MTD_LAB/Publications/PUB_35/Supporting/c02230-ITEM9212-0101-GEOSYNTHETICCLAYLINER.pdf https://docs.penndot.pa.gov/Public/Bureaus/BOCM/BOCM_MTD_LAB/Publications/PUB_35/Supporting/c02230-ITEM9212-0101-GEOSYNTHETICCLAYLINER.pdf https://docs.penndot.pa.gov/Public/Bureaus/BOCM/BOCM_MTD_LAB/Publications/PUB_35/Supporting/c02230-ITEM9212-0101-GEOSYNTHETICCLAYLINER.pdf https://docs.penndot.pa.gov/Public/Bureaus/BOCM/BOCM_MTD_LAB/Publications/PUB_35/Supporting/c02230-ITEM9212-0101-GEOSYNTHETICCLAYLINER.pdf https://docs.penndot.pa.gov/Public/Bureaus/BOCM/BOCM_MTD_LAB/Publications/PUB_35/Supporting/c02230-ITEM9212-0101-GEOSYNTHETICCLAYLINER.pdf https://agruamerica.com/ https://agruamerica.com/ https://agruamerica.com/ https://agruamerica.com/ https://agruamerica.com/ https://agruamerica.com/

Posted:

9/14/2026 3:52:55PM

Section 218: Foamed Glass Aggregate

218.2(a) Foamed Glass Aggregate Last Revised: 9/10/2026

Requirements: Foam Glass Aggregate Specification

Product Ref. No.Name DMSCF

Aero Aggregates LLC, 1500 Chester Pike, Eddystone, PA 19022 https://aeroaggregates.com/AERO1 15 Foamed Glass Aggregate (FGA) AeroAggregates FG-G15 2017-048Exempt

TDS: AeroAggregates FG-G15 Technical Data Sheet https://docs.penndot.pa.gov/Public/Bureaus/BOCM/BOCM_MTD_LAB/Publications/PUB_35/Supporting/FoamGlassAggregates-TableAnB-SpecialProvision-Specs.PNG https://aeroaggregates.com/ https://aeroaggregates.com/ https://aeroaggregates.com/ https://aeroaggregates.com/ https://aeroaggregates.com/ https://aeroaggregates.com/ https://docs.penndot.pa.gov/Public/Bureaus/BOCM/BOCM_MTD_LAB/Publications/PUB_35/Supporting/AeroAggregatesFG-G15-TDS.pdf https://docs.penndot.pa.gov/Public/Bureaus/BOCM/BOCM_MTD_LAB/Publications/PUB_35/Supporting/AeroAggregatesFG-G15-TDS.pdf https://docs.penndot.pa.gov/Public/Bureaus/BOCM/BOCM_MTD_LAB/Publications/PUB_35/Supporting/AeroAggregatesFG-G15-TDS.pdf https://docs.penndot.pa.gov/Public/Bureaus/BOCM/BOCM_MTD_LAB/Publications/PUB_35/Supporting/AeroAggregatesFG-G15-TDS.pdf https://docs.penndot.pa.gov/Public/Bureaus/BOCM/BOCM_MTD_LAB/Publications/PUB_35/Supporting/AeroAggregatesFG-G15-TDS.pdf

Posted:

9/14/2026 3:52:55PM

Section 219: Geofoam Lightweight Fill

219.2(a) Expanded Polystyrene (EPS) Geofoam Blocks Last Revised: 9/14/2026

Product Ref. No.Name DMSCF

Poly Molding LLC, 96 Fourth Avenue, Haskell, NJ 07420 https://www.polymoldingllc.com/POLMD 15 EPS Geofoam Block - Type 1 (EPS22) EPS 22 2015-155QNo

EPS Geofoam Block - Type 2 (EPS39) EPS 39 2015-155QNo https://www.polymoldingllc.com/ https://www.polymoldingllc.com/ https://www.polymoldingllc.com/ https://www.polymoldingllc.com/ https://www.polymoldingllc.com/ https://www.polymoldingllc.com/ https://www.polymoldingllc.com/ https://www.polymoldingllc.com/

Posted:

9/14/2026 3:52:55PM

Section 220: Flowable Backfill

220.2(i) Air Entraining Admixtures Last Revised: 9/10/2026

Product Name Ref. No.Recommeded Dosage

NTPEP Test Number

Chryso Inc., 2133 85th Street, North Bergen, NJ 07047 https://www.chrysoinc.com/CHRYS215

AEA For Flowable Fill Darafill 1997-148J

Euclid Chemical Company, 19215 Redwood Road, Cleveland, OH 44110-2799 http://www.euclidchemical.com/EUCLD 15

AEA For Flowable Fill Eucon Easy Fill 2015-056J

Fritz-Pak Corporation, 4821 Eastover Circle, Mesquite, TX 75149 http://www.fritzpak.com/FRITZ 15

AEA For Flowable Fill Sika Lightcrete Powder 2013-205J

Master Builders Solutions Admixtures US, LLC, 23700 Chagrin Blvd., Cleveland, OH 44122 https://www.master-builders-solutions.com/en-usMBS-0 15

AEA For Flowable Fill MasterCell 25 1999-132JAs required by testing

CADD-2015-01-120

Master Builders Solutions Admixtures US, LLC, 7100 Wright Road, Houston, TX 77041 https://www.master-builders-solutions.com/en-usMBS-5 15

AEA For Flowable Fill MasterCell 30 2006-024JAs required by testing https://www.chrysoinc.com/ https://www.chrysoinc.com/ https://www.chrysoinc.com/ https://www.chrysoinc.com/ https://www.chrysoinc.com/ https://www.chrysoinc.com/ https://www.chrysoinc.com/ https://www.chrysoinc.com/ http://www.euclidchemical.com/ http://www.euclidchemical.com/ http://www.euclidchemical.com/ http://www.euclidchemical.com/ http://www.euclidchemical.com/ http://www.euclidchemical.com/ http://www.euclidchemical.com/ http://www.euclidchemical.com/ http://www.fritzpak.com/ http://www.fritzpak.com/ http://www.fritzpak.com/ http://www.fritzpak.com/ http://www.fritzpak.com/ http://www.fritzpak.com/ http://www.fritzpak.com/ http://www.fritzpak.com/ https://www.master-builders-solutions.com/en-us https://www.master-builders-solutions.com/en-us https://www.master-builders-solutions.com/en-us https://www.master-builders-solutions.com/en-us https://www.master-builders-solutions.com/en-us https://www.master-builders-solutions.com/en-us https://www.master-builders-solutions.com/en-us https://www.master-builders-solutions.com/en-us https://www.master-builders-solutions.com/en-us https://www.master-builders-solutions.com/en-us https://www.master-builders-solutions.com/en-us https://www.master-builders-solutions.com/en-us https://www.master-builders-solutions.com/en-us https://www.master-builders-solutions.com/en-us https://www.master-builders-solutions.com/en-us https://www.master-builders-solutions.com/en-us https://www.master-builders-solutions.com/en-us https://www.master-builders-solutions.com/en-us https://www.master-builders-solutions.com/en-us https://www.master-builders-solutions.com/en-us https://www.master-builders-solutions.com/en-us https://www.master-builders-solutions.com/en-us https://www.master-builders-solutions.com/en-us https://www.master-builders-solutions.com/en-us https://www.master-builders-solutions.com/en-us https://www.master-builders-solutions.com/en-us https://www.master-builders-solutions.com/en-us https://www.master-builders-solutions.com/en-us https://www.master-builders-solutions.com/en-us https://www.master-builders-solutions.com/en-us

Posted:

9/14/2026 3:52:55PM

Section 413: Superpave Mixture Design

413.2(f) WMA Technologies (Additive(s), Modifier(s), or Processes) Last Revised: 9/10/2026

For WMA Technologies that can be blended at a refinery or terminal and supplied by an asphalt (Performance Graded Asphalt Binder Supplier), the asphalt supplier must complete an online Product Evaluation Application for each grade and WMA Technology to be evaluated for potential approval. Approved WMA asphalt material suppliers are listed in Section 702d Asphalt Cement.

For contracts bid prior to April 10, 2020, this Section was formerly 411.2(g)

Product Ref. No.Name NTPEP Test Number

3S Chemicals, LLC, 1379 Shoemaker St, Nanty-Glo, PA 15943 https://3schemicalsllc.com/3SC-1 15

Chemical Additive with Anti-Strip Additives OMEGA BOND 2025-210Q Provisionally Approved: Under provisional approval, the Department will monitor its use, application, and performance for a period of two years (12/28/2025 to 12/28/2027). Contact PennDOT’s Laboratory Testing Section at (717) 346-1548 before using on a project. Notification shall include the following information: ECMS Project No., ECMS Construction Item Number, State Route, Beginning Location (Segment/Offset), End Location (Segment/Offset), JMF Year & Number, and JMF Supplier Code.

Chemical Additive with Anti-Strip Additives ULTRA BOND 2025-046QWMA-2025-01-002 Provisionally Approved: Under provisional approval, the Department will monitor its use, application, and performance for a period of two years (6/12/2025 to 6/12/2027). Contact PennDOT’s Laboratory Testing Section at (717) 346-1548 before using on a project. Notification shall include the following information: ECMS Project No., ECMS Construction Item Number, State Route, Beginning Location (Segment/Offset), End Location (Segment/Offset), JMF Year & Number, and JMF Supplier Code.

Astec Industries, Inc., P.O. Box 72787, Chattanooga, TN 37407 http://www.astecindustries.com/ASTIN 15

Mechanical Foaming Equipment/Process Astec Warm Mix System / Double Barrel Green / GreenPac System

-----N/A

Cargill Industrial Specialties, 12201 South Torrence Avenue, Chicago, IL 60617 http://www.cargill.com/bioindustrialCIS01 15

Chemical Additive with Anti-Strip Additives Anova 1501 2018-014QWMA-2022-02-004

Eastern Industries, Inc., 4401 Camp Meeting Rd., Ste 200, Center Valley, PA 18034 https://www.nesl.com/EASIN 15

Mechanical Foaming Equipment/Process SMART-FOAM System 2011-207QN/A

Gencor Industries, Inc., 5201 N. Orange Blossom Trail, Orlando, FL 32810 http://www.gencor.com/GENID 15

Mechanical Foaming Equipment/Process Green Machine UltraFoam GX2 Process

-----N/A https://3schemicalsllc.com/ https://3schemicalsllc.com/ https://3schemicalsllc.com/ https://3schemicalsllc.com/ https://3schemicalsllc.com/ https://3schemicalsllc.com/ https://3schemicalsllc.com/ http://www.astecindustries.com/ http://www.astecindustries.com/ http://www.astecindustries.com/ http://www.astecindustries.com/ http://www.astecindustries.com/ http://www.astecindustries.com/ http://www.astecindustries.com/ http://www.astecindustries.com/ http://www.cargill.com/bioindustrial http://www.cargill.com/bioindustrial http://www.cargill.com/bioindustrial http://www.cargill.com/bioindustrial http://www.cargill.com/bioindustrial http://www.cargill.com/bioindustrial http://www.cargill.com/bioindustrial http://www.cargill.com/bioindustrial http://www.cargill.com/bioindustrial https://www.nesl.com/ https://www.nesl.com/ https://www.nesl.com/ https://www.nesl.com/ https://www.nesl.com/ https://www.nesl.com/ https://www.nesl.com/ https://www.nesl.com/ http://www.gencor.com/ http://www.gencor.com/ http://www.gencor.com/ http://www.gencor.com/ http://www.gencor.com/ http://www.gencor.com/ http://www.gencor.com/ http://www.gencor.com/

Posted:

9/14/2026 3:52:55PM

Section 413: Superpave Mixture Design

413.2(f) WMA Technologies (Additive(s), Modifier(s), or Processes) Last Revised: 9/10/2026

For WMA Technologies that can be blended at a refinery or terminal and supplied by an asphalt (Performance Graded Asphalt Binder Supplier), the asphalt supplier must complete an online Product Evaluation Application for each grade and WMA Technology to be evaluated for potential approval. Approved WMA asphalt material suppliers are listed in Section 702d Asphalt Cement.

For contracts bid prior to April 10, 2020, this Section was formerly 411.2(g)

Product Ref. No.Name NTPEP Test Number

Iterchimica SpA, Via G. Marconi 21 24040, Suisio, Italy https://iterchimica.it/en/ITERCH15

Chemical Additive with Anti-Strip Additives Iterlow SL 2026-019QWMA-2023-02-002 Provisionally Approved: Under provisional approval, the Department will monitor its use, application, and performance for a period of two years (6/26/2026 to 6/26/2028).

Maxam Equipment, Inc., 1575 Universal Ave., Kansas City, MO 64120 http://maxamequipment.com/Products.htmMAXEQ 15

Mechanical Foaming Equipment/Process AQUABlack Solutions WMA System

-----N/A

McConnaughay Technologies, Suit-Kote Corporation, 1911 Lorings Crossing, Cortland, NY 13045 https://www.suit-kote.com/low-emission-asphalt-lea/

MCCTE 15

Foaming Additive/Process Low Emission Asphalt

(LEA)

-----N/A https://iterchimica.it/en/ https://iterchimica.it/en/ https://iterchimica.it/en/ https://iterchimica.it/en/ https://iterchimica.it/en/ https://iterchimica.it/en/ https://iterchimica.it/en/ https://iterchimica.it/en/ http://maxamequipment.com/Products.htm http://maxamequipment.com/Products.htm http://maxamequipment.com/Products.htm http://maxamequipment.com/Products.htm http://maxamequipment.com/Products.htm http://maxamequipment.com/Products.htm http://maxamequipment.com/Products.htm http://maxamequipment.com/Products.htm http://maxamequipment.com/Products.htm https://www.suit-kote.com/low-emission-asphalt-lea/ https://www.suit-kote.com/low-emission-asphalt-lea/ https://www.suit-kote.com/low-emission-asphalt-lea/ https://www.suit-kote.com/low-emission-asphalt-lea/ https://www.suit-kote.com/low-emission-asphalt-lea/ https://www.suit-kote.com/low-emission-asphalt-lea/ https://www.suit-kote.com/low-emission-asphalt-lea/ https://www.suit-kote.com/low-emission-asphalt-lea/ https://www.suit-kote.com/low-emission-asphalt-lea/ https://www.suit-kote.com/low-emission-asphalt-lea/ https://www.suit-kote.com/low-emission-asphalt-lea/ https://www.suit-kote.com/low-emission-asphalt-lea/ https://www.suit-kote.com/low-emission-asphalt-lea/ https://www.suit-kote.com/low-emission-asphalt-lea/ https://www.suit-kote.com/low-emission-asphalt-lea/ https://www.suit-kote.com/low-emission-asphalt-lea/ https://www.suit-kote.com/low-emission-asphalt-lea/ https://www.suit-kote.com/low-emission-asphalt-lea/

Posted:

9/14/2026 3:52:55PM

Section 413: Superpave Mixture Design

413.2(f) WMA Technologies (Additive(s), Modifier(s), or Processes) Last Revised: 9/10/2026

For WMA Technologies that can be blended at a refinery or terminal and supplied by an asphalt (Performance Graded Asphalt Binder Supplier), the asphalt supplier must complete an online Product Evaluation Application for each grade and WMA Technology to be evaluated for potential approval. Approved WMA asphalt material suppliers are listed in Section 702d Asphalt Cement.

For contracts bid prior to April 10, 2020, this Section was formerly 411.2(g)

Product Ref. No.Name NTPEP Test Number

Ingevity, 5255 Virginia Avenue, North Charleston, SC 29406-3615 http://www.ingevity.comMEAWE 15

Chemical Additive Evotherm DAT ----- Chemical Additive with Anti-Strip Additives Evotherm J1 2017-059QWMA-2021-02-001 Chemical Additive with Anti-Strip Additives Evotherm J88 2023-062Q

Provisionally Approved: Under provisional approval, the Department will monitor its use, application, and performance through 10/15/2027.

Chemical Additive with Anti-Strip Additives Evotherm M1 -----WMA-2025-01-008 Chemical Additive with Anti-Strip Additives Evotherm M1-B 2025-230QWMA-2025-01-006

Provisionally Approved: Under provisional approval, the Department will monitor its use, application, and performance for a period of two years (4/6/2026 to 4/6/2028).

Chemical Additive with Anti-Strip Additives Evotherm M18 2018-035QWMA-2025-01-008 Formulated for improved adhesion to challenging aggregates.

Chemical Additive with Anti-Strip Additives Evotherm M80 2023-029QWMA-2025-01-008 Provisionally Approved: Under provisional approval, the Department will monitor its use, application, and performance for another year from 10/15/2025 to 10/15/2026. Formulated to provide additional workability of stiffer asphalt mixes.

Organosilane Chemical Additive with Anti-Strip Additives

Evotherm S30 2023-218QWMA-2023-02-004

Provisionally Approved: Under provisional approval, the Department will monitor its use, application, and performance for a period of two years (9/1/2024 to 9/1/2026). Can be used at very low dosages. Also formulated for use with a PPA modified binder. The allowable use of a chemically modified asphalt binder utilizing PPA (Polyphosphoric Acid) must be covered in an ECMS PennDOT project.

Phosphate Ester Chemical Additive with Anti-Strip Additives

Evotherm P25 2017-061QWMA-2025-01-007

Formulated for use with a PPA modified binder. The allowable use of a chemically modified asphalt binder utilizing PPA (Polyphosphoric Acid) must be covered in an ECMS PennDOT project.

Meeker Equipment, 4381 Front Mountain Road, Belleville, PA 17004 https://www.meekerequipment.com/productDetails-11MEEEQ 15

Mechanical Foaming Equipment/Process Warm Mix System -----http://www.ingevity.com http://www.ingevity.com http://www.ingevity.com http://www.ingevity.com http://www.ingevity.com http://www.ingevity.com http://www.ingevity.com https://www.meekerequipment.com/productDetails-11 https://www.meekerequipment.com/productDetails-11 https://www.meekerequipment.com/productDetails-11 https://www.meekerequipment.com/productDetails-11 https://www.meekerequipment.com/productDetails-11 https://www.meekerequipment.com/productDetails-11 https://www.meekerequipment.com/productDetails-11 https://www.meekerequipment.com/productDetails-11 https://www.meekerequipment.com/productDetails-11 https://www.meekerequipment.com/productDetails-11 https://www.meekerequipment.com/productDetails-11

Posted:

9/14/2026 3:52:55PM

Section 413: Superpave Mixture Design

413.2(f) WMA Technologies (Additive(s), Modifier(s), or Processes) Last Revised: 9/10/2026

For WMA Technologies that can be blended at a refinery or terminal and supplied by an asphalt (Performance Graded Asphalt Binder Supplier), the asphalt supplier must complete an online Product Evaluation Application for each grade and WMA Technology to be evaluated for potential approval. Approved WMA asphalt material suppliers are listed in Section 702d Asphalt Cement.

For contracts bid prior to April 10, 2020, this Section was formerly 411.2(g)

Product Ref. No.Name NTPEP Test Number

Nouryon Chemicals LLC, 100 Matsonford Road, Building 5, Suite 550, Radnor, PA 19087 https://www.nouryon.com/markets/asphalt/NOUR1 15 Plant 8005 N Tabler Road Morris, IL 60450

Formerly AkzoNobel Surface Chemistry, LLC (AKZO1 15)

Chemical Additive with Anti-Strip Additives Rediset LQ-1102C 2017-072QWMA-2016-01-003

PQ Corporation, Linden Wood Corporate Center, 300 Lindenwood Drive, Malvern, PA 19355-1740 http://pqcorp.com/PQCOR 15

Foaming Additive/Process Advera WMA -----N/A

Reliable Asphalt Products, Inc., 521 Old Seven Mile Pike, Shelbyville, KY 40065 http://www.reliableasphalt.com/RAP-1 15

Mechanical Foaming Equipment/Process…