Attachment B Speciciation List - Low Water Rescue Boats.pdf
PDF 311 KB Posted
- Attached to
- Request for Proposal Low Water Rescue Boats
- Solicitation number
- S-25800-00007400
- Issued by
- Jackson County, Marion County, Oregon
About this file
This document is an Attachment B Specification List for the Oregon Department of Emergency Management's (ODEM) Request for Proposal (RFP) for Low Water Rescue Boats under the OregonBuys RFP Number S-25800-00007400. The RFP seeks to procure aluminum, welded, corrosion-resistant, and commercially suitable low water rescue boats with inboard jet propulsion, center console configuration, and specific requirements for seating, propulsion, electrical systems, lighting, and boat trailer. The boats must meet USCG and ABYC compliance standards. ODEM purchases the equipment, owns it, and makes it available for local use, while the awardee is responsible for maintenance, insurance, staffing, and response.
The pricing and funding for this procurement is provided through the State Preparedness and Incident Response Equipment (SPIRE) grant, which is funded by bond sales and only covers capital assets. There are no set-asides mentioned, and no information provided about incumbents or the current environment. The RFP does not specify the quantities required or the award date and contract term.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Attachment B Specification List Propulsion: Inboard Jet Configuration: Center Console Oregon Department of Emergency Management OregonBuys RFP Number S-25800-00007400 Low Water Rescue Boats
Specifications Item X Details
Note: Quoter shall mark each item to acknowledge specification.
HULL REQUIREMENTS
Aluminum 1.11 Welded, corrosion resistant, and suitable for commercial use Non-Skid Flooring 1.12 Alumnium, no vinyl covered wood flooring Bottom Thickness and Protection 1.13 Suitable for shallow water use, heavy duty construction
SEATING
Operator 2.11 Ergonomically designed for operator wearing full rescue gear Additional 2.12 Must be able to carry 3 adult passengers safely
PROPULSION
Engine 3.11 Major manufacturer, must be USCG/ABYC compliant installation Pump 3.12 Major manufacturer, performance matched impeller, stomp grate installed Fuel Tank 3.13 USCG/EPA approved & compliant, permanently mounted under floor
ELECTRICAL
Electrical System: 12 volt Negative Ground 4.11 Marine battery maintenance charger system, plug in port easily accessible Dual Batteries: secured in transom 4.12 AGM batteries, selector switch in easily accessible location All Electrical Shall Comply with ABYC Standards 4.13 Fuses and circuit resets easily accessible
LIGHTING
USCG Approved LED Navigation Lights 5.11 Emergency Responder LED Lights 5.12 Installed with dash mounted switches Siren Box and Public Address w/ Speaker 5.13 Installed with dash mounted switches & hand mic
BOAT TRAILER
Commercial Duty Trailer - Welded 6.11 Aluminum or galvanized steel
OTHER CRITERIA
Swim deck with boarding ladder 7.11 Non-skid surface and grab handles Two 2000 GPH Bilge Pumps 7.12 1 Auto, 1 Manual - wired separately - "Auto" always powered Center Console 7.13 Grab handles on each side and radio compartment
QUOTER NOTES
File details come from the government source that posted it. Updated .