Attachment 6 National Stock Number Descriptions.pdf

ITEM PURCHASE DESCRIPTION

General Services Administration

ITEM PRODUCT DESCRIPTIONS – PUERTO RICO

(IPD)

Table of Contents Section 1 Pages 2-123 Janitorial/Sanitation/General Supplies 85 IPDs

Section 2 Pages 124- 180 Hardware/Maintenance Repair Operation Supply 57 IPDs

Section 3 Pages 181-296 Office Supplies/Packaging Material 55 IPDs

Section 4 Pages 297 -308 Furniture/Housewares 7 IPDs

Section 5 Pages 309 - 317 Ability One 336 NSNs/IPDs

Section 1 - Janitorial/Sanitation/General Supplies 85 IPDs

NSN: 6840-01-410-8860

DISINFECTANT-DEODORANT, GENERAL PURPOSE: ZEP Manufacturing Co., Zepynamic-A II, P/N: 351500 or equal, with the following requirements and characteristics:

The product shall thoroughly and rapidly kill bacteria, viruses, fungi, mold and mildew. It shall deodorize and be pleasantly scented. The product shall dry instantly, leaving no oily film.

The product shall be registered and labeled in compliance with the Federal Insecticide, Fungicide, and Rodenticide Act (FIFRA), as amended in accordance with 40 Code of Federal Regulations (CFR) 152-180.

This act and regulations promulgated there under is administered by the EPA.

The product shall meet the volatile organic content specified under the California Volatile Organic Compound (VOC) Emissions for Consumer Products requirements.

The disinfectant shall be effective against the following pathogens:

Inactivates HIV-1 (AIDS) virus and Herpes Simplex Types 1 and 2 viruses on precleaned environmental surfaces or objects previously soiled with blood or bodily fluids. Kills TB, Salmonella, Paratyphoid B, Streptococcus, canine-related and other viruses. Kills Athlete’s Foot fungus, Escherichia coli, and Staphylococcus aureus. Controls mold and mildew. The product shall dry instantly, leaving no oily film.

Kills both gram positive and gram negative bacteria including Escherichia coli; Pseudomonas aeruginosa’ Salmonella choleraesuis’ Salmonella schottmuelleri.

Kills the species: Mycobacterium tuberculosis (Tubercule bacilli).

Completely inhibits growth of Aspergillus niger and Penicillum glaucum fungi on cloth.

The product shall have the following physical properties:

pH: 10 to 11

Density: 0.895 g/cm3

Physical characteristics shall include:

Case Pack: 12 cans

Can Size: 20 ounce

Net wt shall be a minimum of 15 ounces

UNIT OF ISSUE: BX (Twelve (12) each, twenty (20) ounce aerosol containers per box.)

PRODUCT CONFORMANCE: The products provided shall meet the salient characteristics of this description, conform to the producer's own specifications, standards, and quality assurance practices and be the same product offered for sale in the commercial market. The Government reserves the right to require proof of such conformance.

PREPARATION FOR DELIVERY: Item(s) packaged and packed for domestic and export shipments to civilian and military activities shall comply with the GSAM provision/Clause 552.211-75 and/or with the latest requirements of ASTM D-3951 Standard Practice for Commercial Packaging; however compliance to the latest edition of ASTM standard D-3951 is mandatory for General Supplies and Services (GSS) contracts. In the event a pallet or skid is used for shipping, the following notice shall apply:

WOOD PACKING MATERIAL: Packaging and packing of supplies using Wood Packaging Material (WPM) on a pallet or skid for export shipments (includes forwarding and container and consolidation points, commercial freight forwarders and third party logistics providers) shall comply with the requirements in provision/Clause GSAM 552.211.89, Non-Manufactured Wood Packaging Material for Export or the applicable requirements in ASTM D-3951 relative to the WPM. All wood shall be treated and stamped appropriately for export, including the actual pallet or skid, if made of wood.

MARKING: Marking shall comply with GSAM 552.211.73. Marking of supplies for deliveries to domestic civilian activities shall comply with the latest edition of Federal Standard 123.

Marking of supplies for deliveries to military activities domestic and export locations, including forwarding and container consolidation points (CCPs), shall comply with the latest edition of Military Standard 129. The Military Shipping Label (MSL) must show the “Ship To” address as well as the ultimate consignee (Mark for DoDAAC and address) and the Transportation Control Number (TCN).

DATA SUBMISSION: The safety data sheet (SDS) shall be submitted in accordance with the latest revision of Federal Standard No. 313. One copy of the SDS shall be included inside or affixed to the outside of each transport package. If affixed outside the SDS must be placed in a weather resistant envelope. For each SDS data in all 16 sections of the OSHA HazCom/ GHS standards will be required.

Regulated material shall be labeled with an OSHA/GHS compliant label to include the following data: (1) Product identifier, (2) Signal Word, (3) Hazard Statements, (4)

Pictograms, (5) Precautionary Statements, and (6) Chemical Manufacturer, Importer, or Other Responsible Party information.

NOTE TO SHIPPER: THE FOLLOWING REQUIREMENTS MUST BE ADDED TO THE PURCHASE ORDER FOR

SHIPMENTS OF REGULATED MATERIALS:

SPECIAL REQUIREMENTS FOR DOMESTIC SHIPMENTS OF REGULATED NSN: 6840-01-410-8860

DISINFECTANT-DEODORANT, GENERAL PURPOSE: ZEP Manufacturing Co., Zepynamic-A II, P/N:

351500 or equal, with the following requirements and characteristics:

The product shall thoroughly and rapidly kill bacteria, viruses, fungi, mold and mildew. It shall deodorize and be pleasantly scented. The product shall dry instantly, leaving no oily film.

The product shall be registered and labeled in compliance with the Federal Insecticide, Fungicide, and Rodenticide Act (FIFRA), as amended in accordance with 40 Code of Federal Regulations (CFR) 152-

180. This act and regulations promulgated there under is administered by the EPA.

The product shall meet the volatile organic content specified under the California Volatile Organic Compound (VOC) Emissions for Consumer Products requirements.

The disinfectant shall be effective against the following pathogens:

Inactivates HIV-1 (AIDS) virus and Herpes Simplex Types 1 and 2 viruses on precleaned environmental surfaces or objects previously soiled with blood or bodily fluids. Kills TB, Salmonella, Paratyphoid B, Streptococcus, canine-related and other viruses. Kills Athlete’s Foot fungus, Escherichia coli, and Staphylococcus aureus. Controls mold and mildew. The product shall dry instantly, leaving no oily film.

Kills both gram positive and gram negative bacteria including Escherichia coli; Pseudomonas aeruginosa’ Salmonella choleraesuis’ Salmonella schottmuelleri.

Kills the species: Mycobacterium tuberculosis (Tubercule bacilli).

Completely inhibits growth of Aspergillus niger and Penicillum glaucum fungi on cloth.

The product shall have the following physical properties:

pH: 10 to 11

Density: 0.895 g/cm3

Physical characteristics shall include:

Case Pack: 12 cans

Can Size: 20 ounce

Net wt shall be a minimum of 15 ounces

UNIT OF ISSUE: BX (Twelve (12) each, twenty (20) ounce aerosol containers per box.)

PRODUCT CONFORMANCE: The products provided shall meet the salient characteristics of this description, conform to the producer's own specifications, standards, and quality assurance practices and be the same product offered for sale in the commercial market. The Government reserves the right to require proof of such conformance.

PREPARATION FOR DELIVERY: Item(s) packaged and packed for domestic and export shipments to civilian and military activities shall comply with the GSAM provision/Clause 552.211-75 and/or with the latest requirements of ASTM D-3951 Standard Practice for Commercial Packaging; however compliance to the latest edition of ASTM standard D-3951 is mandatory for General Supplies and Services (GSS) contracts. In the event a pallet or skid is used for shipping, the following notice shall apply:

WOOD PACKING MATERIAL: Packaging and packing of supplies using Wood Packaging Material (WPM) on a pallet or skid for export shipments (includes forwarding and container and consolidation points, commercial freight forwarders and third party logistics providers) shall comply with the requirements in provision/Clause GSAM 552.211.89, Non-Manufactured Wood Packaging

Material for Export or the applicable requirements in ASTM D-3951 relative to the WPM. All wood shall be treated and stamped appropriately for export, including the actual pallet or skid, if made of wood.

MARKING: Marking shall comply with GSAM 552.211.73. Marking of supplies for deliveries to domestic civilian activities shall comply with the latest edition of Federal Standard 123.

Marking of supplies for deliveries to military activities domestic and export locations, including forwarding and container consolidation points (CCPs), shall comply with the latest edition of Military Standard 129. The Military Shipping Label (MSL) must show the “Ship To” address as well as the ultimate consignee (Mark for DoDAAC and address) and the Transportation Control Number (TCN).

DATA SUBMISSION: The safety data sheet (SDS) shall be submitted in accordance with the latest revision of Federal Standard No. 313. One copy of the SDS shall be included inside or affixed to the outside of each transport package. If affixed outside the SDS must be placed in a weather resistant envelope. For each SDS data in all 16 sections of the OSHA HazCom/ GHS standards will be required. Regulated material shall be labeled with an OSHA/GHS compliant label to include the following data: (1) Product identifier, (2) Signal Word, (3) Hazard Statements, (4)

Pictograms, (5) Precautionary Statements, and (6) Chemical Manufacturer, Importer, or Other Responsible Party information.

NOTE TO SHIPPER: THE FOLLOWING REQUIREMENTS MUST BE ADDED TO THE PURCHASE ORDER FOR

SHIPMENTS OF REGULATED MATERIALS:

SPECIAL REQUIREMENTS FOR DOMESTIC SHIPMENTS OF REGULATED MATERIALS:

In addition to other requirements of this description, for domestic shipments, the commodity shall be packaged, packed, and marked in a manner to meet the applicable requirements of the Department of Transportation (DOT) regulations 49 CFR, parts 171- 180, and OSHA HCS in 29 CFR, part 1910.1200, latest revision for the mode of transport utilized.

SPECIAL REQUIREMENTS FOR OVERSEAS SHIPMENTS OF REGULATED MATERIALS (including container and consolidation points, commercial freight forwarders and third part logistics providers).

In addition to other requirements of this description items shall be packaged, packed, and marked to comply with the latest versions of DOT HMR in 49 CFR, parts 171-180, and OSHA HCS in 29 CFR, part 1910.1200, and the applicable IMDG, IATA, ICAO, AFMAN-24, standard for the mode of transportation.

MATERIALS:

In addition to other requirements of this description, for domestic shipments, the commodity shall be packaged, packed, and marked in a manner to meet the applicable requirements of the Department of Transportation (DOT) regulations 49 CFR, parts 171- 180, and OSHA HCS in 29 CFR, part 1910.1200, latest revision for the mode of transport utilized.

SPECIAL REQUIREMENTS FOR OVERSEAS SHIPMENTS OF REGULATED MATERIALS (including container and consolidation points, commercial freight forwarders and third part logistics providers).

In addition to other requirements of this description items shall be packaged, packed, and marked to comply with the latest versions of DOT HMR in 49 CFR, parts 171-180, and OSHA HCS in 29 CFR, part 1910.1200, and the applicable IMDG, IATA, ICAO, AFMAN-24, standard for the mode of transportation.

NSN: 6850-00-664-1409

ANTIFREEZE (INHIBITED, ETHYLENE GLYCOL BASE,

ANTIFREEZE/COOLANT): Shall be Morningstar Industries Antifreeze, P/N A-18830255 or equal, with the following requirements and characteristics:

Shall be in accordance with ASTM Standard No. D3306, latest revision, Glycol Base Engine Coolant for Automobile and Light Duty Service, and shall not contain recycled or reprocessed materials.

Coolant Type I: In addition to the requirements of ASTM D3306, the antifreeze concentrate shall have a maximum silicon concentration of 250 ppm when tested in accordance with ASTM D4985, latest revision. The antifreeze concentrate must be suitable for both cars and trucks using iron or aluminum engine parts. It shall be compatible with supplemental coolant additives.

All drums used to supply this material shall be new and unused. Unit of issue: DR (One (1) each fifty-five

(55) gallon drum).

Maximum age on delivery: Five (5) months from date of manufacture.

PRODUCT CONFORMANCE: The products provided shall meet the salient characteristics of this description, conform to the producer's own specifications, standards, and quality assurance practices and be the same product offered for sale in the commercial market. The Government reserves the right to require proof of such conformance.

PREPARATION FOR DELIVERY: Item(s) packaged and packed for domestic and export shipments to civilian and military activities shall comply with the GSAM provision/Clause 552.211- 75 and/or with the latest requirements of ASTM D-3951 Standard Practice for Commercial Packaging; however compliance to the latest edition of ASTM standard D-3951 is mandatory for General Supplies and Services (GSS) contracts. In the event a pallet or skid is used for shipping, the following notice shall apply:

Wood Packing Material: Packaging and packing of supplies using Wood Packaging Material (WPM) on a pallet or skid for export shipments (includes forwarding and container and consolidation points, commercial freight forwarders and third party logistics providers) shall comply with the requirements in provision/Clause GSAM 552.211.89, Non- Manufactured Wood Packaging Material for Export or the applicable requirements in ASTM D-3951 relative to the WPM. All wood shall be treated and stamped appropriately for export, including the actual pallet or skid, if made of wood.

MARKING: Marking shall comply with GSAM 552.211.73. Marking of supplies for deliveries to domestic civilian activities shall comply with the latest edition of Federal Standard 123.

Marking of supplies for deliveries to military activities domestic and export locations, including forwarding and container consolidation points (CCPs), shall comply with the latest edition of Military Standard 129. The Military Shipping Label (MSL) must show the “Ship To” address as well as the ultimate consignee (Mark for DoDAAC and address) and the Transportation Control Number (TCN).

Marking shall include environmental, precautionary and/or hazardous marking required by law or regulation governing product use, transportation, shipping, stocking, and storage. The antifreeze concentrate shall be labeled in accordance with the Federal Hazardous Substances Act (16 CFR 1500).

Special marking shall include:

(1) Lot or batch number

(2) Dates of manufacture and re-inspection 36 months after date of manufacture.

(3) Brand name

(4) Protection chart

(5) Cautionary marking

(6) Statement to indicate that antifreeze provides all metal (including aluminum per ASTM D 4340) protection.

(7) Instructions for use.

DATA SUBMISSION: The safety data sheet (SDS) shall be submitted in accordance with the latest revision of Federal Standard No. 313. One copy of the SDS shall be included inside or affixed to the outside of each transport package. If affixed outside the SDS must be placed in a weather resistant envelope. For each SDS data in all 16 sections of the OSHA HazCom/ GHS standards will be required.

Regulated material shall be labeled with an OSHA/GHS compliant label to include the following data:

(1) Product identifier, (2) Signal Word, (3) Hazard Statements, (4)

Pictograms, (5) Precautionary Statements, and (6) Chemical Manufacturer, Importer, or Other Responsible Party information.

NSN: 7350-01-080-8842

TRAY, MESS, COMPARTMENTED: Shall be Genpak Industries P/N SN203, Dart P/N 90HT3R or equal and have the following characteristics:

Foam plastic, disposable, 3 compartments, for hot meal carry-out. Rectangular, with cover, slot closing.

Material used for containers shall be clean, sanitary, and free of toxic ingredients and shall conform to subpart B of 21 CFR 177.

Color: White

10” (±1”) by 9½” (±1”) by 3” (minimum) deep. Length and width shall be measured at the outer edges of the respective midpoints at the top of the bottom section. Depth shall be measured at the midpoint of the front of a closed tray.

UNIT OF ISSUE: BX (Box of 200 trays)

PRODUCT CONFORMANCE: The products provided shall meet the salient characteristics of this description, conform to the producer's own specifications, standards, and quality assurance practices and be the same product offered for sale in the commercial market. The Government reserves the right to require proof of such conformance.

MARKING: Marking shall comply with GSAM 552.211.73. Marking of supplies for deliveries to domestic civilian activities shall comply with the latest edition of Federal Standard 123.

Marking of supplies for deliveries to military activities domestic and export locations, including forwarding and container consolidation points (CCPs), shall comply with the latest edition of Military Standard 129. The Military Shipping Label (MSL) must show the “Ship To” address as well as the ultimate consignee (Mark for DoDAAC and address) and the Transportation Control Number (TCN).

PREPARATION FOR DELIVERY: Item(s) packaged and packed for domestic and export shipments to civilian and military activities shall comply with the GSAM provision/Clause 552.211-75 and/or with the latest requirements of ASTM D-3951 Standard Practice for Commercial Packaging; however compliance to the latest edition of ASTM standard D-3951 is mandatory for General Supplies and Services (GSS) contracts. In the event a pallet or skid is used for shipping, the following notice shall apply:

WOOD PACKING MATERIAL: Packaging and packing of supplies using Wood Packaging Material (WPM) on a pallet or skid for export shipments (includes forwarding and container and consolidation points, commercial freight forwarders and third party logistics providers) shall comply with the requirements in provision/Clause GSAM 552.211.89, Non-Manufactured Wood Packaging Material for Export or the applicable requirements in ASTM D-3951 relative to the WPM. All wood shall be treated and stamped appropriately for export, including the actual pallet or skid, if made of wood.

NSN: 7910-01-423-9525

CLEANER, VACUUM, ELECTRIC: Shall be Metropolitan Vacuum Cleaner Co. Inc., DataVac Pro Series Model number, MDV-1BA, or equal, in accordance with the following characteristics:

Lightweight “hand-held” vacuum cleaner/blower power unit, designed for cleaning computers, printers and other electronic office equipment. Shall be UL listed.

Features:

Construction - Steel

Motor - 1 speed

Volts - 120

Peak HP – 0.75

CFM - 70

AMPS - 4.0 nominal

Bag - Disposable paper

Weight - 3 lbs

Size - 16” x 4” x 4”

Accessories:

19” flexible hose

Pin pointer nozzle

Crevice tool

Dust brush

Four-piece micro-cleaning tool kit

Shoulder strap

5 disposable bags

Unit of Issue - EA (Each, consisting of one complete system in a package)

PRODUCT CONFORMANCE: The products provided shall meet the salient characteristics of this description, conform to the producer's own specifications, standards, and quality assurance practices and be the same product offered for sale in the commercial market. The Government reserves the right to require proof of such conformance.

MARKING: Marking shall comply with GSAM 552.211.73. Marking of supplies for deliveries to domestic civilian activities shall comply with the latest edition of Federal Standard 123.

Marking of supplies for deliveries to military activities domestic and export locations, including forwarding and container consolidation points (CCPs), shall comply with the latest edition of Military Standard 129. The Military Shipping Label (MSL) must show the “Ship To” address as well as the ultimate consignee (Mark for DoDAAC and address) and the Transportation Control Number (TCN).

PREPARATION FOR DELIVERY: Item(s) packaged and packed for domestic and export shipments to civilian and military activities shall comply with the GSAM provision/Clause 552.211- 75 and/or with the latest requirements of ASTM D-3951 Standard Practice for Commercial Packaging; however compliance to the latest edition of ASTM standard D-3951 is mandatory for General Supplies and Services (GSS) contracts. In the event a pallet or skid is used for shipping, the following notice shall apply:

Wood Packing Material: Packaging and packing of supplies using Wood Packaging Material (WPM) on a pallet or skid for export shipments (includes forwarding and container and consolidation points, commercial freight forwarders and third party logistics providers) shall comply with the requirements in provision/Clause GSAM 552.211.89, Non-Manufactured Wood Packaging Material for Export or the applicable requirements in ASTM D-3951 relative to the WPM. All wood shall be treated and stamped appropriately for export, including the actual pallet or skid, if made of wood.

NSN: 7930-00-269-1272

ABSORBENT MATERIAL, OIL AND WATER: Shall be a NuGenTec absorbent material, P/N NGT-269-1272 or equal, with the following requirements and characteristics:

The product shall be a low dusting, granular clay/silicate calcite type absorbent material for use in absorbing oil and water. The absorbent material shall contain less than 0.1 % crystalline silicates. The total crystalline silicate shall be determined using NIOSH Method 7500.

UNIT OF ISSUE: CO (Forty-four (44) pounds minimum product net weight per container)

PRODUCT CONFORMANCE: The products provided shall meet the salient characteristics of this description, conform to the producer's own specifications, standards, and quality assurance practices and be the same product offered for sale in the commercial market. The Government reserves the right to require proof of such conformance.

PREPARATION FOR DELIVERY: All unit packaging and packing shall facilitate shipment by small package carrier (for example, fiberboard drums, fiberboard boxes with plastic liners, plastic bucket or plastic pails). The item(s) shall be packaged and packed to afford adequate protection against physical damage during shipment from the supplier to the first receiving activity. The pack shall comply with the rules and regulations applicable to the mode of transportation. The package shall be the same as that normally provided by the supplier. In the event a pallet or skid is used for shipping, the following notice shall apply:

Notice of special requirements for shipment to all countries that have endorsed the IPPC Guidelines for treatment of non manufactured wood packaging: The International Plant Protection Convention (IPPC) has approved and published on March 15, 2002, “Guidelines for Regulating Wood Packaging Material in International Trade”. Countries endorsing the IPPC Guidelines can be found at the USDA.gov web site. Additionally, shipments delivered to DOD distribution facilities or freight consolidation points for eventual delivery to or through EU/IPPC countries shall comply with applicable DLA Regulation DLAD 47.305.1

MARKING: Shipments to GSA and other civilian agencies shall be marked in accordance with FED-STD-

123. Shipments to the Department of Defense (DOD) shall be marked in accordance with MIL-STD-129.

Special marking shall include:

1) Lot Batch number.

2) Dates of manufacture.

3) Instructions for use.

4) All items packed in open head pails of 4 to 6 gallon capacity shall have the pails marked with Child Drowning Warning Labels to comply ASTM F 1615. ASTM standards are available from ASTM. 100 Barr Harbor Dr., West Conshohocken, PA 19428.

DATA SUBMISSION: The safety data sheet (SDS) shall be submitted in accordance with the latest revision of Federal Standard No. 313. For shipments to GSA distribution centers or Customer Supply Centers, the contractor shall provide one copy of the MSDS inside or affixed to the outside of each transport package as defined in FED-STD-123. If affixed outside, the SDS must be placed in a weather-resistant envelope.

PRODUCT CONFORMANCE: The products provided shall meet the salient characteristics of this description, conform to the producer's own specifications, standards, and quality assurance practices and be the same product offered for sale in the commercial market. The Government reserves the right to require proof of such conformance.

MARKING: Marking shall comply with GSAM 552.211.73. Marking of supplies for deliveries to domestic civilian activities shall comply with the latest edition of Federal Standard 123.

Marking of supplies for deliveries to military activities domestic and export locations, including forwarding and container consolidation points (CCPs), shall comply with the latest edition of Military Standard 129. The Military Shipping Label (MSL) must show the ultimate consignee (Mark for DoDAAC) and the Transportation Control Number (TCN).

Special marking shall include:

1) Lot Batch number.

2) Dates of manufacture.

3) Instructions for use.

4) All items packed in open head pails of 4 to 6 gallon capacity shall have the pails marked with Child Drowning Warning Labels to comply ASTM F 1615. ASTM standards are available from ASTM. 100 Barr Harbor Dr., West Conshohocken, PA 19428.

DATA SUBMISSION: The safety data sheet (SDS) shall be submitted in accordance with the latest revision of Federal Standard No. 313. For shipments to GSA distribution centers or Customer Supply Centers, the contractor shall provide one copy of the MSDS inside or affixed to the outside of each transport package as defined in FED-STD-123. If affixed outside, the SDS must be placed in a weather-resistant envelope.

PREPARATION FOR DELIVERY: Item(s) packaged and packed for domestic and export shipments to civilian and military activities shall comply with the GSAM provision/Clause 552.211- 75 and/or with the latest requirements of ASTM D-3951 Standard Practice for Commercial Packaging; however compliance to the latest edition of ASTM standard D-3951 is mandatory for General Supplies and Services (GSS) contracts. In the event a pallet or skid is used for shipping, the following notice shall apply:

WOOD PACKING MATERIAL: Packaging and packing of supplies using Wood Packaging Material (WPM) on a pallet or skid for export shipments (includes forwarding and container and consolidation points, commercial freight forwarders and third party logistics providers) shall comply with the requirements in provision/Clause GSAM 552.211.89, Manufactured Wood Packaging Material for Export or the applicable requirements in ASTM D 3951 relative to the WPM. All wood shall be treated and stamped appropriately for export, including the actual pallet or skid, if made of wood.

NSN: 7930-01-423-1120

TOWELETTE, CLEANING: ZEP Manufacturing Company, ZEP Clean Ems HC Towels, P/N: 346806 or equal, with the following requirements and characteristics:

The item shall be an antibacterial, waterless towelette for cleaning hands. The towels shall be perforated and packaged in a self contained canister. The towels shall be composed of a polypropylene and cellulose blend. Each towel shall be approximately 10-1/4 inch X 11-3/4 inches. The towelettes shall be packaged 60 each per container.

Unit of Issue: BX (Six (6) each containers per box).

Maximum age on delivery: Three (3) months from date of manufacture.

PRODUCT CONFORMANCE: The products provided shall meet the salient characteristics of this description, conform to the producer's own specifications, standards, and quality assurance practices and be the same product offered for sale in the commercial market. The Government reserves the right to require proof of such conformance.

PREPARATION FOR DELIVERY: Item(s) packaged and packed for domestic and export shipments to civilian and military activities shall comply with the GSAM provision/Clause 552.211-75 and/or with the latest requirements of ASTM D-3951 Standard Practice for Commercial Packaging; however compliance to the latest edition of ASTM standard D-3951 is mandatory for General Supplies and Services (GSS) contracts. In the event a pallet or skid is used for shipping, the following notice shall apply:

Wood Packing Material: Packaging and packing of supplies using Wood Packaging Material (WPM) on a pallet or skid for export shipments (includes forwarding and container and consolidation points, commercial freight forwarders and third party logistics providers) shall comply with the requirements in provision/Clause GSAM 552.211.89, Non-Manufactured Wood Packaging Material for Export or the

MARKING: Marking shall comply with GSAM 552.211.73. Marking of supplies for deliveries to domestic civilian activities shall comply with the latest edition of Federal Standard 123.

Marking of supplies for deliveries to military activities domestic and export locations, including forwarding and container consolidation points (CCPs), shall comply with the latest edition of Military Standard 129. The Military Shipping Label (MSL) must show the “Ship To” address as well as the ultimate consignee (Mark for DoDAAC and address) and the Transportation Control Number (TCN).

Special marking shall include:

1) Lot Batch number.

2) Dates of manufacture and re-inspection twenty-four (24) months after date of manufacture.

3) Instructions for use.

DATA SUBMISSION: The safety data sheet (SDS) shall be submitted in accordance with the latest revision of Federal Standard No. 313. One copy of the SDS shall be included inside or affixed to the outside of each transport package. If affixed outside the SDS must be placed in a weather resistant envelope. For each SDS data in all 16 sections of the OSHA HazCom/GHS standards will be required.

Regulated material shall be labeled with an OSHA/GHS compliant label to include the following data: (1) Product identifier, (2) Signal Word, (3) Hazard Statements, (4) Pictograms, (5) Precautionary Statements, and (6) Chemical Manufacturer, Importer, or Other Responsible Party information.

NSN: 4720-01-447-8757

HOSE, NON-METALLIC: Gilmor Manufacturing P/N 874001-1002 or equal, with the following requirements and characteristics:

USE: Four-ply (minimum) rubber/vinyl garden water hose GENERAL: Commercial grade with abrasion-resistant cover, flexible and kink-resistant, 500 pounds per square inch burst strength

MATERIAL: Rubber/vinyl with reinforcement

LENGTH: 100.0 feet

DIAMETER: 0.625 inch

HOSE COLLAR: Included at faucet end

COUPLINGS: Brass

COLOR: Gray (colored stripe optional)

UNIT OF ISSUE: LG (length of 100 feet).

COMPREHENSIVE PROCUREMENT GUIDELINES: This item falls under the EPA Comprehensive Procurement Guidelines (CPG) for products containing recovered materials in accordance with 40 CFR Part 247 and E.O. 13693. The garden hose shall contain 60 to 65 percent total recovered materials (based on the weight (not volume). Evidence of CPG-based compliance shall be required.

PRODUCT CONFORMANCE: The products provided shall meet the salient characteristics of this description, conform to the producer's own specifications, standards, and quality assurance practices and be the same product offered for sale in the commercial market. The Government reserves the right to require proof of such conformance.

MARKING: Marking shall comply with GSAM 552.211.73. Marking of supplies for deliveries to domestic civilian activities shall comply with the latest edition of Federal Standard 123.

Marking of supplies for deliveries to military activities domestic and export locations, including forwarding and container consolidation points (CCPs), shall comply with the latest edition of Military Standard 129. The Military Shipping Label (MSL) must show the ultimate consignee (Mark for DoDAAC) and the Transportation Control Number (TCN).

PREPARATION FOR DELIVERY: Item(s) packaged and packed for domestic and export shipments to civilian and military activities shall comply with the GSAM provision/Clause 552.211- 75 and/or with the latest requirements of ASTM D-3951 Standard

Practice for Commercial Packaging; however compliance to the latest edition of ASTM standard D-3951 is mandatory for General Supplies and Services (GSS) contracts. In the event a pallet or skid is used for shipping, the following notice shall apply:

Wood Packing Material: Packaging and packing of supplies using Wood Packaging Material (WPM) on a pallet or skid for export shipments (includes forwarding and container and consolidation points, commercial freight forwarders and third party logistics providers) shall comply with the requirements in provision/Clause GSAM 552.211.89, Manufactured Wood Packaging Material for Export or the applicable requirements in ASTM D 3951 relative to the WPM. All wood shall be treated and stamped appropriately for export, including the actual pallet or skid, if made of wood.

NSN: 7930-01-423-1145

CLEANING COMPOUND, PORCELAIN: Zep Manufacturing Company, Zep Ring Master P/N 184611 or equal, with the following requirements and characteristics:

The cleaning compound shall be a concentrated, water dilutable, all-purpose bathroom cleaner. The cleaner shall be formulated to remove rust, scum, hard water deposits and stains from porcelain, ceramic, chrome, aluminum, and stainless steel fixture surfaces. The product shall contain a blend of mineral acids, emulsifiers, detergents, corrosion inhibitors, perfume and a color indicator. The cleaner shall be capable of clinging to ensure complete coverage of vertical surfaces. The material shall be designed to change color upon rinsing to assure complete rinsing. The product shall be packaged in angled-neck quart squirt bottles for easy application under the rim.

The product shall meet the volatile organic content (VOC) specified under the California Volatile Organic Compound (VOC) Emissions for Consumer Products requirements.

The product shall have the following physical properties: pH: <1.0

UNIT OF ISSUE: BX (Twelve (12) each, thirty-two (32) oz. containers per box)

Maximum age on delivery: Five (5) months from date of manufacture

PRODUCT CONFORMANCE: The products provided shall meet the salient characteristics of this description, conform to the producer's own specifications, standards, and quality assurance practices and be the same product offered for sale in the commercial market. The Government reserves the right to require proof of such conformance.

PREPARATION FOR DELIVERY: Item(s) packaged and packed for domestic and export shipments to civilian and military activities shall comply with the GSAM provision/Clause 552.211-75 and/or with the latest requirements of ASTM D-3951 Standard Practice for Commercial Packaging; however compliance to the latest edition of ASTM standard D-3951 is mandatory for General Supplies and Services (GSS) contracts. In the event a pallet or skid is used for shipping, the following notice shall apply:

WOOD PACKING MATERIAL: Packaging and packing of supplies using Wood Packaging Material (WPM) on a pallet or skid for export shipments (includes forwarding and container and consolidation points, commercial freight forwarders and third party logistics providers) shall comply with the requirements in provision/Clause GSAM 552.211.89, Non- Manufactured Wood Packaging Material for Export or the applicable requirements in ASTM D-3951 relative to the WPM. All wood shall be treated and stamped appropriately for export, including the actual pallet or skid, if made of wood.

MARKING: Marking shall comply with GSAM 552.211.73. Marking of supplies for deliveries to domestic civilian activities shall comply with the latest edition of Federal Standard 123.

Marking of supplies for deliveries to military activities domestic and export locations, including forwarding and container consolidation points (CCPs), shall comply with the latest edition of Military Standard 129. The Military Shipping Label (MSL) must show the “Ship To” address as well as the ultimate consignee (Mark for DoDAAC and address) and the Transportation Control Number (TCN).

Special marking shall include:

1) Lot Batch number.

2) Dates of manufacture and re-inspection thirty-six (36) months after date of manufacture.

3) Instructions for use.

DATA SUBMISSION: The safety data sheet (SDS) shall be submitted in accordance with the latest revision of Federal Standard No. 313. One copy of the SDS shall be included inside or affixed to the outside of each transport package. If affixed outside the SDS must be placed in a weather resistant envelope. For each SDS data in all 16 sections of the OSHA HazCom/ GHS standards will be required.

Regulated material shall be labeled with an OSHA/GHS compliant label to include the following data: (1) Product identifier, (2) Signal Word, (3) Hazard Statements, (4) Pictograms, (5) Precautionary Statements, and (6) Chemical Manufacturer, Importer, or Other Responsible Party information.

NOTE TO SHIPPER: THE FOLLOWING REQUIREMENTS MUST BE ADDED TO THE PURCHASE ORDER FOR

SHIPMENTS OF REGULATED MATERIALS:

SPECIAL REQUIREMENTS FOR DOMESTIC SHIPMENTS OF REGULATED MATERIALS:

In addition to other requirements of this description, for domestic shipments, the commodity shall be packaged, packed, and marked in a manner to meet the applicable requirements of the Department of Transportation (DOT) regulations 49 CFR, parts 171- 180, and OSHA HCS in 29 CFR, part 1910.1200, latest revision for the mode of transport utilized.

SPECIAL REQUIREMENTS FOR OVERSEAS SHIPMENTS OF REGULATED MATERIALS (including container and consolidation points, commercial freight forwarders and third part logistics providers).

In addition to other requirements of this description items shall be packaged, packed, and marked to comply with the latest versions of DOT HMR in 49 CFR, parts 171-180, and OSHA HCS in 29 CFR, part 1910.1200, and the applicable IMDG, IATA, ICAO, AFMAN-24, standard for the mode of transportation.

NSN: 5340-00-514-2782

PADLOCK: Shall be Master Lock P/N 1500 or equal and be in accordance with ASTM F883-09, with the following characteristics:

Type PO 2 - Combination operated

Grade 2 - Performance Level

Option E - Corrosion resistant (see exceptions below) PADLOCK CASE - Stainless steel, round face design DIAL SETTING - Combination dial quantity is from 0-40 PADLOCK SHACKLE – Case hardened steel

CHAINS - Not required

CASE DIAMETER - 1.750 inches (nominal)

SHACKLE CLEARANCE:

VERTICAL - 0.750 + 0.250 inches

HORIZONTAL - 0.750 inch (minimum)

DIAMETER - 0.250 inches (nominal)

UNIT OF ISSUE – EA (each)

NOTE: The supplier shall provide the same commercial model padlock, from shipment to shipment, throughout the life cycle of the contract, in an effort to preclude customer dissatisfaction or complaint(s).

EXCEPTIONS TO THE ASTM:

GENERAL EXCEPTION

1) The salt spray and abrasion tests of ASTM F883 are not required to be performed.

COMBINATION RELATED EXCEPTIONS

2) Shock testing shall be conducted under the lower standard requirements for a “Grade 1” padlock, listed in Table 1 3) Padlocks designed with disks which rotate in one direction only shall be cycled in the normal direction of rotation 4) A single locking spring latch mechanism is acceptable in lieu of a single or dual dead bolt

5) When closing the shackle, the combination lock shall not close until the combination setting is thrown off, requiring a complete resetting to reopen

The issue or revision of ASTM F883 used to determine conformance shall be the issue or revision current on the date of the solicitation for bid or purchase order as applicable. Copies of ASTM documents are available from: ASTM, 100 Barr Harbor Dr., West Conshoken, PA 19428-2959.

SHACKLE: Shall be steel and uniformly case hardened. Inside vertical clearance of the shackle shall be measured from the top center portion of the padlock case to the uppermost inside bend radius of the shackle.

CASE: Shall be constructed of steel and be permanently marked with the manufacturer's name or recognized trademark.

MECHANISM: The locking mechanism shall be constructed of non corrosive material and securely fastened within the case to preclude forcible separation or opening of the padlock without mutilation.

The mechanism shall be lubricated for smooth operation.

CORROSION AND DETERIORATION CONTROL: The padlocks shall be fabricated from compatible materials, inherently corrosion and deterioration resistant or treated to provide protection against the various forms of corrosion and deterioration that may be encountered in any of the applicable storage and use environments to which the padlocks may be exposed. Dissimilar metals which react to produce galvanic corrosion shall be electrically insulated from one another with corrosion inhibiting sealant, chromate tape, varnish, or other suitable means.

WORKMANSHIP: The shackle and case shall have a smooth even surface. Sharp edges and burrs shall be removed and any contours shall be smooth, even transition. The lock mechanisms shall operate smoothly without binding and without the application of excessive force.

description, conform to the producer's own specifications, standards, and quality assurance practices and be the same product offered for sale in the commercial market. The Government reserves the right to require proof of such conformance.

MARKING: Marking shall comply with GSAM 552.211.73. Marking of supplies for deliveries to domestic civilian activities shall comply with the latest edition of Federal Standard 123.

Marking of supplies for deliveries to military activities domestic and export locations, including forwarding and container consolidation points (CCPs), shall comply with the latest edition of Military Standard 129. The Military Shipping Label (MSL) must show the “Ship To” address as well as the ultimate consignee (Mark for DoDAAC and address) and the Transportation Control Number (TCN).

PREPARATION FOR DELIVERY: Item(s) packaged and packed for domestic and export shipments to civilian and military activities shall comply with the GSAM provision/Clause 552.211- 75 and/or with the latest requirements of ASTM D-3951 Standard Practice for Commercial Packaging; however compliance to the latest edition of ASTM standard D-3951 is mandatory for General Supplies and Services (GSS) contracts. In the event a pallet or skid is used for shipping, the following notice shall apply:

Wood Packing Material: Packaging and packing of supplies using Wood Packaging Material (WPM) on a pallet or skid for export shipments (includes forwarding and container and consolidation points, commercial freight forwarders and third party logistics providers) shall comply with the requirements in provision/Clause GSAM 552.211.89, Non-Manufactured Wood Packaging Material for Export or the

NSN: 6110-01-450-4385

REGULATOR, VOLTAGE: Shall be APC P/N BN650M1, APC P/N BE600M1, TrippLite P/N ECO750UPSTAA, or equal, in accordance with the following characteristics:

Meets UL 1778

Power Rating –600 volt-amperes minimum

Nominal input voltage 120V

Input frequency 60 Hz

Input connection NEMA 5-15P

Nominal Output Voltage 120V

Output Frequency 60 Hz

7 NEMA 5-15 outlets, including five with battery backup and two surge-only

420-joule rating, minimum

USB connectivity, providing management of the UPS via the USB port

5-foot power cord, minimum length

LED indicator for power status

Audible alarm indicator for overload

Unit of Issue – EA (Each)

PRODUCT CONFORMANCE: The products provided shall meet the salient characteristics of this description, conform to the producer's own specifications, standards, and quality assurance practices and be the same product offered for sale in the commercial market. The Government reserves the right to require proof of such conformance.

MARKING: Marking shall comply with GSAM 552.211.73. Marking of supplies for deliveries to domestic civilian activities shall comply with the latest edition of Federal Standard 123.

Marking of supplies for deliveries to military activities domestic and export locations, including forwarding and container consolidation points (CCPs), shall comply with the latest edition of Military Standard 129. The Military Shipping Label (MSL) must show the “Ship To” address as well as the ultimate consignee (Mark for DoDAAC and address) and the Transportation Control Number (TCN).

PREPARATION FOR DELIVERY: Item(s) packaged and packed for domestic and export shipments to civilian and military activities shall comply with the GSAM provision/Clause 552.211- 75 and/or with the latest requirements of ASTM D-3951 Standard Practice for Commercial Packaging; however, compliance to the latest edition of ASTM standard D-3951 is mandatory for General Supplies and Services (GSS) contracts. In the event a pallet or skid is used for shipping, the following notice shall apply:

Wood Packing Material: Packaging and packing of supplies using Wood Packaging Material (WPM) on a pallet or skid for export shipments (includes forwarding and container and consolidation points, commercial freight forwarders and third-party logistics providers) shall comply with the requirements in provision/Clause GSAM 552.211.89, Non-Manufactured Wood Packaging Material for Export or the

NSN: 7330-00-285-4299

BOTTLE, VACUUM: Shall be Stanley P/N 10-07934-01 or equal, and have the following characteristics:

Size: 2 quarts, (+4 ounces, -9 ounces)

Inner Shell: Stainless steel

Outer Shell: Stainless steel or painted carbon steel

As an alternate construction, the outer shell may be carbon steel with a painted finish.

The vacuum bottle shall be constructed with stainless steel outer and inner shells joined by welding or brazing. The stainless steel shall conform to the ASTM Standard No. A240/A240M, A480 or combination thereof. The space between the shells shall be insulated by vacuum or by a combination of vacuum and insulation.

The interior surface of the inner shell shall have a 2D or better finish. The exterior of the outer shell shall have a 2B or better finish, a dull frosted finish or a brushed No. 4 commercial finish. The finish numbers shall be as defined by the American Iron and Steel Institute. The outer surface of the bottle shall be permanently marked with the manufacturer's name or trademark, easily identifiable with such manufacturer.

The vacuum bottle shall have a narrow mouth of 2” or less inside diameter and shall be provided with a threaded removable plastic stopper and a screw-on plastic, plastic lined plated steel, or plastic lined stainless steel cup. At the option of the manufacturer, a spigot may be included within the stopper.

All plastics used as components which contact the contents of the bottles shall comply with FDA regulations covering polymers for use in contact with food for human consumption as stated in 21 CFR

177. The contractor shall furnish a certificate of compliance for this requirement.

The vacuum bottle shall be furnished with handle(s) or carrying strap(s) of the type normally furnished commercially.

WORKMANSHIP: The finished vacuum bottle shall be clean and free of slivers, die marks, sharp edges, dents, scratches, pits and deformities, and other defects which may affect appearance or serviceability.

The welds or brazes shall be uniform, sound and free of burn holes, cracks, undercutting, excessive metal build-up, and splatter. There shall be no evidence of scale or flux and the welds or brazes shall be finished to blend with the adjacent joined metal surfaces.

HEAT RETENTION TEST. The complete vacuum bottle shall be filled with water at a temperature of 205ºF (+2ºF), the stopper secured and allowed to stabilize for 10 minutes. The water shall then be emptied and the bottle refilled with water at a temperature of 205ºF (+2ºF) and the stopper secured.

Following not less than 6 hours storage in an ambient temperature of 68ºF to 72ºF, the temperature of the contents shall be measured and shall be 170ºF or greater for compliance.

UNIT OF ISSUE: EA (Each)

PRODUCT CONFORMANCE: The products provided shall meet the salient characteristics of this description, conform to the producer's own specifications, standards, and quality assurance practices and be the same product offered for sale in the commercial market. The Government reserves the right to require proof of such conformance.

MARKING: Marking shall comply with GSAM 552.211.73. Marking of supplies for deliveries to domestic civilian activities shall comply with the latest edition of Federal Standard 123.

Marking of supplies for deliveries to military activities domestic and export locations, including forwarding and container consolidation points (CCPs), shall comply with the latest edition of Military

Standard 129. The Military Shipping Label (MSL) must show the “Ship To” address as well as the ultimate consignee (Mark for DoDAAC and address) and the Transportation Control Number (TCN).

PREPARATION FOR DELIVERY: Item(s) packaged and packed for domestic and export shipments to civilian and military activities shall comply with the GSAM provision/Clause 552.211- 75 and/or with the latest requirements of ASTM D-3951 Standard Practice for Commercial Packaging; however, compliance to the latest edition of ASTM standard D-3951 is mandatory for General Supplies and Services (GSS) contracts. In the event a pallet or skid is used for shipping, the following notice shall apply:

WOOD PACKING MATERIAL: Packaging and packing of supplies using Wood Packaging Material (WPM) on a pallet or skid for export shipments (includes forwarding and container and consolidation points, commercial freight forwarders and third party logistics providers) shall comply with the requirements in provision/Clause GSAM 552.211.89, Non-Manufactured Wood Packaging Material for Export or the applicable requirements in ASTM D-3951 relative to the WPM. All wood shall be treated and stamped appropriately for export, including the actual pallet or skid, if made of wood.

NSN: 7330-01-245-0201

OPENER, CAN, HAND: Shall be Swing-A-Way P/N 407BK or equal, in accordance with Commercial Item Description (CID) A-A-52202C dated April 18, 2012, and have the following characteristics:

Portable, heavy duty, wing operated feed wheel.