Attachment 3 - SPI AK16267876.pdf

Form Approved XDT SPECIAL PACKAGING INSTRUCTION 0MB No. O7O4~O1B8 MB

The public reporting burden for this collection of information Is estimated to average 30 days per response, including the time for reviewing Instructions, searchIng existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of intormallon. Send comments regarding this burden estimale or any other aapect of this collection of Information, Including suggestions for reducing the burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations end Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, ArlIngton, VA 222024302. Respondents should be aware that notwithstanding any other provisIon of law, no person shall be subject to any penalty for falling to comply with a collection of information it it does not displays currently valid 0MB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS.

1. PART OR DRAWING NOJCAGE/NOMENCLATURE 2. CAGE 3. SPI NO.

57K6233 19207 TRANSMISSION 19207 AK 16257876

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

2520-01-625-7876 12-2-2014

7. QUP 8. ICO 9. UNIT PACK WI. ID. UNIT PACK CU ii. UNIT PACK SIZE

1 EA. NONE 271.0 (E~12 — 15.031 (EST.) 37.0 X 27.0 X 26.0 (EST.)

12. MILITARY PRESERVATION 18. 19. 20.

MIL-STD-2073-1D, METHOD 43 STEPS REOD DESCRIPTION

13. CLEANING — — SEE NOTES FOR PACKAGING DETAILS.

MIL-STD-2073-1 D — —

14. DRYING

MIL-STD-2073-1 D — —

15 PACKING I

s. LEVEL A

MTL-STD-2073-1D_AND_NOTE_G

b. LEVEL B

NOT APPLICABLE — —

IS. MARKING MIL-STD-129 AND NOTE F

17. NOTES/DRAWING

A. PRESERVATION AND PACKING SHALL BE IN ACCORDANCE WITH MIL-STD-2073-1 D.

B. KIT CONTENTS: THIS KIT CONTAINS THE FOLLOWING ITEMS SEGREGATED AS SHOWN BELOW: SEGREGATED

~fl NAME PART NUMBER CAGE PACK NUMBER

2 COVER, FITTING 12460491 19207

1 TRANSMISSION 12563695 19207

C. PREPARE TWO 12460491 COVERS IN ACCORDANCE WITH THE STEPS BELOW:

1 BAG: MIL-DTL-1 17, TYPE III, CLASS B, STYLE 2, SIZE: aX 3. AFTER PLACING ITEMS IN BAG, CLOSE BAG BY HEAT

~ SEALING.

2. IDENTIFICATION: IDENTIFY THE BAG WITH SEGREGATED PACK NUMBER “1”.

3. INSPECTION: INSPECT SEGREGATED PACK IN ACCORDANCE WITH CRITERIA FOR METHOD 31.

D. CONSOLIDATE ITEMS FROM NOTE C IN ACCORDANCE WITH THE STEPS BELOW:

I. CONTAINER: ASTM-D 5118, TYPE CF, CLASS DOM, VARIETY SW, GRADE 275, STYLE RSC, SIZE: 4 X 4 X 4.

2. CLOSURE: SHALL BE IN ACCORDANCE WITH ASTM-D 1974, METHOD 2B3.

3. INSPECTION: INSPECT CONSOLIDATION PACK IN ACCORDANCE WITH CRITERIA FOR METHOD 10.

4. MARK CONTAINER WITH NOTE: ‘THIS BOX CONTAINS SEGREGATED PACK 1

E. PREPARE ONE 12563695 TRANSMISSION IN ACCORDANCE WITH THE STEPS BELOW:

1. INTERNAL PRESERVATIVE: OPERATIONAL FLUID. FILLTRANSMISSION ASSEMBLYTO OPERATING LEVEL WITH OPERATIONAL FLUID. ROTATE INTERNAL MECHANISM SUFFICIENTLY TO ASSURE COMPLETE COVERAGE OF

ALL INTERNAL SURFACES. DRAIN OIL FROM ASSEMBLY AND INSTALL DRAIN PLUG.

2. EXTERIOR PRESERVATIVE: MIL-PRF-21260, GRADE PE1O. APPLY PRESERVATIVE TO ALL EXTERNAL UNPAINTED

FERROUS METALLIC SURFACES OF TRANSMISSION ASSEMBLY AND SHIPPING PLATE.

3. CLOSURE: NA5834. SEAL ALL PORTS WITH PLUGS OR CAPS OF THE APPROPRIATE SIZE.

4. BLOCKING: SHALL BE DEVISED TO IMMOBILIZE ITEM.

5. WRAP: MIL-PRF-121, TYPE II, CLASS 2. SECURE WRAP USING TAPE.

6. SECURE CONTAINER FROM NOTED TO REAR SIDE OF TRANSMISSION HOUSING USING TAPE.

~ CUSHIONING: PPP-C-1797, TYPE I, THICKNESS 1/8-INCH. CUSHIONING SHALL COMPLETELY COVER THE

TRANSMISSION.

8. ENVELOPE: MIL-E-6060.

~ PAPER: A-A-203, BASIS WEIGHT 50 LB (MIN.). PAPER SHALL BE LARGE ENOUGH TO PREVENT ENVELOPE FROM

COMING IN DIRECT CONTACT WITH CONTAINER BASE.

10. CONTAINER: ASTM-D 6880, CLASS 2, STYLE 2.

00 FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE. Page 1 of 2 Pages Ossigned using Perform Pro. WHS/DIOR, Jun ei

Form Approved XDTSPECIAL PACKAGING INSTRUCTION (Continuation Sheet) 0MB No. 0704-0188 MB

The public reporting burden for this collection of information ts estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information, Send comments regarding this burden estimate or any other aspect of this collection ot information, inciuding suggestions for reducing the burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operalions and Reports (0704-0168), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 222024302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for thuling to comply with a collection of information if It does not display a currently valid 0MB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS.

1, PART OR DRAWING NOJOAGE/NOMENCLATURE 2. CAGE 3. SM NO.

57K6233 19207 TRANSMISSION 19207 AKI 6257876

4. NATIONAL STOCK NO. 5, DATE 6. REVISION

2520-01 -625-7876 1 2-2-2014

F. PROVIDE A PACKING LIST WITH THE UNIT PACK IN ACCORDANCE WITH MIL-STD-129 IDENTIFYING THE ITEMS WITHIN THE KIT. ON THE PACKING LIST, IDENTIFY THE ITEMS WITHIN EACH SEGREGATED PACK TOGETHER WITH THEIR

SEGREGATED PACK NUMBER,

S. THE UNIT CONTAINER IS THE SHIPPING CONTAINER,

DD FORM 2169C, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE. Page 2 of 2 Pages Designed using Perform Pro. WI-ISIDIOR, Jun 97