Attachment 2 - Technical and Packaging Requirements - 70Z03826QJ0000238.xlsx
XLSX spreadsheet 24 KB Posted
- Attached to
- Wire, Electrical
- Solicitation number
- 70Z03826QJ0000238
About this file
This is a Technical and Packaging Requirements attachment for a US Coast Guard Aviation Logistics Center electrical wire solicitation (70Z03826QJ0000238). Offerors must comply with all specified requirements and confirm acceptance by checking boxes on the attachment; failure to submit confirmation results in an "unacceptable" technical rating and elimination from further evaluation.
The requirements mandate that wire be manufactured and inspected per applicable SAE standards with manufacturer's Quality Assurance Testing Reports, OEM data sheets, and test results included at shipment. All wire must be NEW approved aerospace-grade material manufactured within the last 12 months, supplied on full continuous-run spools with no breaks or multiple segments. Wire must be properly marked per SAE AS22759 and/or NAVAIR 01-1A-505-1 standards (every 6 to 60 inches, in black or green lettering; 26 gauge and smaller exempt from marking requirements) and include manufacturer cage code, part number, date of manufacture, and coating type. Offerors must provide a Certificate of Conformance per FAR 52.246-15, manufacturer certification with traceability confirming airworthiness and suitability for USCG aircraft installation, and documentation verifying new wire status. Each spool must be clearly identified with quantity designation, National Stock Number, part number, manufacturer lot number, and manufacture date on the spool tag. Quality Assurance requires access to both wire ends for inspection with proper termination (heat shrink on bitter end). FOB terms must be clearly stated with shipping costs included unless FOB Origin is specified. Any wire failing to meet these technical and packaging requirements is subject to rejection during quality inspection.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Attachment 1 - Terms and Conditions - 70Z03826QJ0000238.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Sheet1 Attachment 2 - Technical and Packaging Requirements -
70Z03826QJ0000238
| US COAST GUARD |
| AVIATION LOGISTICS CENTER |
| ELIZABETH CITY, NC 27909-5001 |
| All offerors MUST be able to satisfy all the technical and packaging requirements as outlined below. Confirmation must be provided by checking all the boxes below and submitting with Attachment 1 - List of Items - 70Z03826QJ00000XX. Failure to submit the requested attachments will result in an "unacceptable" rating for technical acceptability and the offeror's quote will not be further evaluated. | |
| FALSE | Offerors must be able to provide the Manufacturer Company, Cage Code, type of coating applied to the wire, and number of strands and strand size applicable to wire order. |
| FALSE | Wire and Cable shall be manufactured and inspected in accordance with (IAW) SAE Standards per wire/cable. Please include manufacturer’s Quality Assurance Testing Report including “Finished Wire Resistance Check”, OEM’s Data Sheet, and results of the test IAW SAE specifications with shipment. |
| FALSE | The Contractor shall furnish a Certificate of Conformance (COC) in accordance with Federal Acquisition Regulation (FAR) clause 52.246-15. COC must be submitted in the format specified in the clause. Offerors must be able to provide necessary certification including traceability to the manufacturer, manufacturer's (COC) to ensure parts are in airworthy condition, suitable for installation on USCG aircraft. |
| FALSE | All wire shall be NEW approved wire. The Contractor shall provide documentation with a statement verifying that all wire shall be NEW approved wire, in response to this RFQ. (For example, no wire outer insulation containing PVC), for this wire would be disqualifying for aerospace standards. |
| FALSE | Each reel of wire shall be a full spool when possible. Spools shall be a continuous run with no break. Multiple segments per spool are not authorized and will be rejected by Quality Assurance. Wire must be marked IAW SAE AS22759 and/or NAVAIR 01-1A-505-1 and manufactured within last 12 months. |
| FALSE | Wire and Cable marking should show the part number (e.g., M22759/12-20-9) and manufacturer Cage Code (e.g., 12ABC). Marking is typically every 12 inches, but may be every 6 to 60 inches apart, in black or green color. (Exception to include when outer jacket requires a stark contrast to identify wire number, such as black jacket and white lettering). The lack of proper marking is reason for rejection. NOTE: Wire size 26 gauge and smaller does not require marking. The date of manufacture shall be listed on every spool data label as well as the type of coating applied to the wire. |
| FALSE | QA requires access to both ends of Wire and Cable on the spool for inspection. All Wire and Cable must be terminated correctly, for example, heat shrink on bitter end of wire. Each spool of wire needs to be identified with (example: 1 of 6, or use manufacturers assigned name), National Stock Number, Part Number, manufacturer lot number of wire order, and date of manufacturer listed on tag of spool (usually the wire comes with the manufacturers assigned name “LRB” already designated on the spool). |
| FALSE | The FOB Shipping Point (Destination or Origin) and Estimated Shipping Cost if FOB Origin. All quotes will be considered FOB Destination unless FOB Origin is clearly stated, and shipping costs are included. |
| FALSE | Offerors acknowledge that any wire that is delivered and that does not adhere to these technical and packaging requirements may fail inspection and be rejected by Quality Assurance. |
| COMPANY: | |
| CAGE: | |
| CONTACT: |
File details come from the government source that posted it. Updated .