ATTACHMENT -2 ELIN Pricing Sheet.xlsx

XLSX spreadsheet 22 KB Posted

Attached to
REFUSE COLLECTION
Solicitation number
W911RQ-24-R-X111
Issued by

About this file

This pricing sheet template is for a refuse collection services contract at Red River Army Depot. The contractor will provide various waste containers and collection services over a one year base period and four one-year options. Services include 4, 8, and 40 cubic yard containers; stationary compactors; roll-off containers; relocating full roll-offs; and transporting containers to landfill. Estimated quantities and unit prices are listed for the base year and each option year for each required line item number (ELIN). The contractor will also provide unscheduled pickups as needed. The total evaluated price will be determined by multiplying the unit prices by the estimated quantities.

View the file

Other files

File Type Posted
ATTACHMENT 2 ELIN Pricing Sheet REV 2.xlsx XLSX spreadsheet
ATT-03 ELIN A0010 HISTORY.xlsx XLSX spreadsheet
Questions and Answers 01-23-23.pdf PDF
Refuse Combo Solicitation-W911RQ-24-R-X111-REV 1.docx DOCX document
ATTACHMENT 2 ELIN Pricing Sheet REV 1.xlsx XLSX spreadsheet
JAN 16 SITE VISIT.pdf PDF
Refuse Combo Solicitation-W911RQ-24-R-X111.docx DOCX document
ATTACHMENT -1 BLDG LOCATION LIST.xlsx XLSX spreadsheet

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

TOTAL EVALUATED PRICE

W911RQ-24-R-X111 ELIN PRICE SCHEDULE ATT 2
TOTAL EVALUATED PRICE TABLE
PRICE
BASE$ - 0
OPTION YEAR 1 (ONE)$ - 0
OPTION YEAR 2 (TWO)$ - 0
OPTION YEAR 3 (THREE)$ - 0
OPTION YEAR 4 (FOUR)$ - 0
TOTAL EVALUATED PRICE$ - 0
INSTRUCTIONS
PLEASE ONLY FILL IN THE YELLOW BLANKS ON ALL TABS
NO ACTION IS REQUIRED ON THIS TAB IT WILL AUTO PULL FROM THE OTHER TABS

BASE

CLINELINDescriptionEstimated Qty Per MonthUnit PriceTotal Price Per Year
BASE YEAR
0001A0001FOUR (4) Cubic Yard per ANSI Z245.30-1994 Shall be heavy-duty steel construction that meets or exceeds the standards

established by the American National Standards Institute (ANSI) for waste containers as follows: Waste Containers Safety Requirements, 1994, American National Standards Institute, ANSI Z245.30-1994; and Waste Containers Compatibility Dimensions, 1996, American National Standards Institute, ANSI Z245.60-1996 as referenced in 40 Code of Federal Regulations (Guidelines For The Storage And Collection Of Residential, Commercial, And Institutional Solid Waste) 243.200-1.

Containers shall be equipped with a 1-1/2 inch nominal diameter threaded drain and plug on each container and equipped with dual lids and lid handles, with lidopening assist springs or approved alternates. Interior height shall be 48 inches plus or minus 2 in.59$ - 0
A0002EIGHT (8) Cubic Yard Container w/o sliding.

Shall be heavy-duty steel construction that meets or exceeds the standards established by the American National Standards Institute (ANSI) for waste containers as follows: Waste Containers Safety Requirements, 1994, American National Standards Institute, ANSI Z245.30-1994; and Waste Containers Compatibility Dimensions, 1996, American National Standards Institute, ANSI Z245.60-1996 as referenced in 40 Code of Federal Regulations (Guidelines For The Storage And Collection Of Residential, Commercial, And Institutional Solid

Waste) 243.200-1. Containers shall be equipped with a 1-1/2 inch nominal diameter threaded drain and plug on each container.45$ - 0
A0003EIGHT (8) Cubic Yard Container with sliding Lids. Shall be heavy-duty steel construction that meets or exceeds the standards established by the American National Standards Institute (ANSI) for waste containers as follows: Waste Containers Safety Requirements, 1994, American National Standards Institute, ANSI Z245.30-1994; and Waste Containers Compatibility Dimensions, 1996, American National Standards Institute, ANSI Z245.60-1996 as referenced in 40 Code of Federal Regulations (Guidelines For The Storage And Collection Of Residential, Commercial, And Institutional Solid Waste) 243.200-1. Containers shall be equipped with a 1-1/2 inch nominal diameter threaded drain and plug on each container. Each container shall be equipped with 28 in x 28 in or larger sliding doors (with handles) on each end and with one sliding door with an opening of 30 in x 34 in or greater on the rear lid. Alternate dimensions may be submitted for approval.45$ - 0
A0004EIGHT (8) Cubic Yard Container Modified for Sawdust. Container Modified for Sawdust Collection Per Month. This one (1) container requires a metal lid modified to accept sawdust from a collector system. This will require a minimum of six (6) inch to eight (8) inch diameter opening in the metal lid.1$ - 0
A0005Dock Load/Thru-Wall Stationary Compactor with 40-42 Cubic Yard Container.Compactor system shall conform to American National Standards Institute (ANSI) specification Z245.1-84: Safety Requirements for Refuse Collection and Compaction Equipment. The contractor shall submit written certification to the KO/COR from the equipment anufacturer(s) that the compactor systems being installed for this contract comply with ANSI Z245.1-84, NEMA standards, National Electric Code, and (NFPA 70).5$ - 0
A0006End or Side Ground Load Stationary Compactor with Roll-Off. The compactor chutes shall be constructed of 10 gauge or thicker steel on top and sides and 1/4 inch steel on bottom and shall be reinforced and anchored to insure structural rigidity. Chutes shall have a 30 in x 48 in or larger inspection door at the
charging chamber.7$ - 0
A0007(15) Cubic Yard Open Top Roll-Off Container.

Roll off containers shall be of heavy-duty steel construction that meets or exceeds the standards established by the American National Standards Institute (ANSI) for waste containers as follows: Waste Containers Safety Requirements, 1994, American National Standards Institute, ANSI Z245.30-1994; and Waste Containers Compatibility Dimensions, 1996, American National Standards Institute, ANSI Z245.60-1996 as referenced in 40 Code of Federal Regulations (Guidelines For

The Storage and Collection of Residential, Commercial, And Institutional Solid Waste) 243.200-1. Containers shall be equipped with a 1-1/2 in nominal diameter threaded drain and plug on each container.5$ - 0
A0008(40) Cubic Yard Open Top Roll-Off Container. Roll off containers shall be of heavy-duty steel construction that meets or exceeds the standards established by the American National Standards Institute (ANSI) for waste containers as follows: Waste Containers Safety Requirements, 1994, American National Standards Institute, ANSI Z245.30-1994; and Waste Containers Compatibility Dimensions, 1996, American National Standards Institute, ANSI Z245.60-1996 as referenced in 40 Code of Federal Regulations (Guidelines For The Storage And Collection Of Residential, Commercial, And Institutional Solid Waste) 243.200-1. Containers shall be equipped with a 1-1/2 in nominal diameter threaded drain and plug on each container.16$ - 0
A0009Twenty Five (25) locations on Red River Army Depot, where the Roll-Off Container of Non-Hazardous waste can be relocated Red River Army Depot maintains a roll-off truck to switch out roll-offs of Non – Hazardous waste at waste collection sites on depot when they are full. There are occasions when this vehicle is inoperable and the contractor, upon the request of the KO/COR, will be asked to provide this service. Only Actuals will be paid by the Government.25$ - 0
A0010Transportation of Full Containers to Landfill, Except those for Sawdust, Wood, and Dust Collectors300$ - 0
A0011Unscheduled Pick UP IAW PWS 1.1.3 Service Delivery SummaryN/AUnit PriceN/A
Unscheduled Pick UP 4 CUBIC YARD ContainerN/AN/A
Unscheduled 8 CUBIC YARD Container without Sliding LidsN/AN/A
Unscheduled 8 CUBIC YARD Container with Sliding LidsN/AN/A
Unscheduled 8 CUBIC YARD Container Modified SawdustN/AN/A
Unscheduled 40-42 CUBIC YARD Container Dock Load or Thru-wall Sta.N/AN/A
Unscheduled End or Side Ground Load Stationary Compactor with Roll-ON/AN/A
Unscheduled 15 Cubic Yard Open Top Roll off ContainerN/AN/A
Unscheduled 40 CUBIC YARD Open Top Roll offN/AN/A
SUBTOTALBASE YEAR$ - 0

OY 1

CLINELINDescriptionEstimated Qty Per MonthUnit PriceTotal Price Per Year
OPTION YEAR 1 (ONE)
1001A0001FOUR (4) Cubic Yard per ANSI Z245.30-1994 Shall be heavy-duty steel construction that meets or exceeds the standards

established by the American National Standards Institute (ANSI) for waste containers as follows: Waste Containers Safety Requirements, 1994, American National Standards Institute, ANSI Z245.30-1994; and Waste Containers Compatibility Dimensions, 1996, American National Standards Institute, ANSI Z245.60-1996 as referenced in 40 Code of Federal Regulations (Guidelines For The Storage And Collection Of Residential, Commercial, And Institutional Solid Waste) 243.200-1.

Containers shall be equipped with a 1-1/2 inch nominal diameter threaded drain and plug on each container and equipped with dual lids and lid handles, with lidopening assist springs or approved alternates. Interior height shall be 48 inches plus or minus 2 in.59$ - 0
A0002EIGHT (8) Cubic Yard Container w/o sliding.

Shall be heavy-duty steel construction that meets or exceeds the standards established by the American National Standards Institute (ANSI) for waste containers as follows: Waste Containers Safety Requirements, 1994, American National Standards Institute, ANSI Z245.30-1994; and Waste Containers Compatibility Dimensions, 1996, American National Standards Institute, ANSI Z245.60-1996 as referenced in 40 Code of Federal Regulations (Guidelines For The Storage And Collection Of Residential, Commercial, And Institutional Solid

Waste) 243.200-1. Containers shall be equipped with a 1-1/2 inch nominal diameter threaded drain and plug on each container.45$ - 0
A0003EIGHT (8) Cubic Yard Container with sliding Lids. Shall be heavy-duty steel construction that meets or exceeds the standards established by the American National Standards Institute (ANSI) for waste containers as follows: Waste Containers Safety Requirements, 1994, American National Standards Institute, ANSI Z245.30-1994; and Waste Containers Compatibility Dimensions, 1996, American National Standards Institute, ANSI Z245.60-1996 as referenced in 40 Code of Federal Regulations (Guidelines For The Storage And Collection Of Residential, Commercial, And Institutional Solid Waste) 243.200-1. Containers shall be equipped with a 1-1/2 inch nominal diameter threaded drain and plug on each container. Each container shall be equipped with 28 in x 28 in or larger sliding doors (with handles) on each end and with one sliding door with an opening of 30 in x 34 in or greater on the rear lid. Alternate dimensions may be submitted for approval.45$ - 0
A0004EIGHT (8) Cubic Yard Container Modified for Sawdust. Container Modified for Sawdust Collection Per Month. This one (1) container requires a metal lid modified to accept sawdust from a collector system. This will require a minimum of six (6) inch to eight (8) inch diameter opening in the metal lid.1$ - 0
A0005Dock Load/Thru-Wall Stationary Compactor with 40-42 Cubic Yard Container.Compactor system shall conform to American National Standards Institute (ANSI) specification Z245.1-84: Safety Requirements for Refuse Collection and Compaction Equipment. The contractor shall submit written certification to the KO/COR from the equipment anufacturer(s) that the compactor systems being installed for this contract comply with ANSI Z245.1-84, NEMA standards, National Electric Code, and (NFPA 70).5$ - 0
A0006End or Side Ground Load Stationary Compactor with Roll-Off. The compactor chutes shall be constructed of 10 gauge or thicker steel on top and sides and 1/4 inch steel on bottom and shall be reinforced and anchored to insure structural rigidity. Chutes shall have a 30 in x 48 in or larger inspection door at the
charging chamber.7$ - 0
A0007(15) Cubic Yard Open Top Roll-Off Container.

Roll off containers shall be of heavy-duty steel construction that meets or exceeds the standards established by the American National Standards Institute (ANSI) for waste containers as follows: Waste Containers Safety Requirements, 1994, American National Standards Institute, ANSI Z245.30-1994; and Waste Containers Compatibility Dimensions, 1996, American National Standards Institute, ANSI Z245.60-1996 as referenced in 40 Code of Federal Regulations (Guidelines For

The Storage and Collection of Residential, Commercial, And Institutional Solid Waste) 243.200-1. Containers shall be equipped with a 1-1/2 in nominal diameter threaded drain and plug on each container.5$ - 0
A0008(40) Cubic Yard Open Top Roll-Off Container. Roll off containers shall be of heavy-duty steel construction that meets or exceeds the standards established by the American National Standards Institute (ANSI) for waste containers as follows: Waste Containers Safety Requirements, 1994, American National Standards Institute, ANSI Z245.30-1994; and Waste Containers Compatibility Dimensions, 1996, American National Standards Institute, ANSI Z245.60-1996 as referenced in 40 Code of Federal Regulations (Guidelines For The Storage And Collection Of Residential, Commercial, And Institutional Solid Waste) 243.200-1. Containers shall be equipped with a 1-1/2 in nominal diameter threaded drain and plug on each container.16$ - 0
A0009Twenty Five (25) locations on Red River Army Depot, where the Roll-Off Container of Non-Hazardous waste can be relocated Red River Army Depot maintains a roll-off truck to switch out roll-offs of Non – Hazardous waste at waste collection sites on depot when they are full. There are occasions when this vehicle is inoperable and the contractor, upon the request of the KO/COR, will be asked to provide this service. Only Actuals will be paid by the Government.25$ - 0
A0010Transportation of Full Containers to Landfill, Except those for Sawdust, Wood, and Dust Collectors300$ - 0
A0011Unscheduled Pick UP IAW PWS 1.1.3 Service Delivery SummaryN/AUnit PriceN/A
Unscheduled Pick UP 4 CUBIC YARD ContainerN/AN/A
Unscheduled 8 CUBIC YARD Container without Sliding LidsN/AN/A
Unscheduled 8 CUBIC YARD Container with Sliding LidsN/AN/A
Unscheduled 8 CUBIC YARD Container Modified SawdustN/AN/A
Unscheduled 40-42 CUBIC YARD Container Dock Load or Thru-wall Sta.N/AN/A
Unscheduled End or Side Ground Load Stationary Compactor with Roll-ON/AN/A
Unscheduled 15 Cubic Yard Open Top Roll off ContainerN/AN/A
Unscheduled 40 CUBIC YARD Open Top Roll offN/AN/A
SUBTOTALOPTION YEAR 1$ - 0

OY 2

CLINELINDescriptionEstimated Qty Per MonthUnit PriceTotal Price Per Year
CLINOPTION YEAR 2 (TWO)
2001A0001FOUR (4) Cubic Yard per ANSI Z245.30-1994 Shall be heavy-duty steel construction that meets or exceeds the standards

established by the American National Standards Institute (ANSI) for waste containers as follows: Waste Containers Safety Requirements, 1994, American National Standards Institute, ANSI Z245.30-1994; and Waste Containers Compatibility Dimensions, 1996, American National Standards Institute, ANSI Z245.60-1996 as referenced in 40 Code of Federal Regulations (Guidelines For The Storage And Collection Of Residential, Commercial, And Institutional Solid Waste) 243.200-1.

Containers shall be equipped with a 1-1/2 inch nominal diameter threaded drain and plug on each container and equipped with dual lids and lid handles, with lidopening assist springs or approved alternates. Interior height shall be 48 inches plus or minus 2 in.59$ - 0
A0002EIGHT (8) Cubic Yard Container w/o sliding.

Shall be heavy-duty steel construction that meets or exceeds the standards established by the American National Standards Institute (ANSI) for waste containers as follows: Waste Containers Safety Requirements, 1994, American National Standards Institute, ANSI Z245.30-1994; and Waste Containers Compatibility Dimensions, 1996, American National Standards Institute, ANSI Z245.60-1996 as referenced in 40 Code of Federal Regulations (Guidelines For The Storage And Collection Of Residential, Commercial, And Institutional Solid

Waste) 243.200-1. Containers shall be equipped with a 1-1/2 inch nominal diameter threaded drain and plug on each container.45$ - 0
A0003EIGHT (8) Cubic Yard Container with sliding Lids. Shall be heavy-duty steel construction that meets or exceeds the standards established by the American National Standards Institute (ANSI) for waste containers as follows: Waste Containers Safety Requirements, 1994, American National Standards Institute, ANSI Z245.30-1994; and Waste Containers Compatibility Dimensions, 1996, American National Standards Institute, ANSI Z245.60-1996 as referenced in 40 Code of Federal Regulations (Guidelines For The Storage And Collection Of Residential, Commercial, And Institutional Solid Waste) 243.200-1. Containers shall be equipped with a 1-1/2 inch nominal diameter threaded drain and plug on each container. Each container shall be equipped with 28 in x 28 in or larger sliding doors (with handles) on each end and with one sliding door with an opening of 30 in x 34 in or greater on the rear lid. Alternate dimensions may be submitted for approval.45$ - 0
A0004EIGHT (8) Cubic Yard Container Modified for Sawdust. Container Modified for Sawdust Collection Per Month. This one (1) container requires a metal lid modified to accept sawdust from a collector system. This will require a minimum of six (6) inch to eight (8) inch diameter opening in the metal lid.1$ - 0
A0005Dock Load/Thru-Wall Stationary Compactor with 40-42 Cubic Yard Container.Compactor system shall conform to American National Standards Institute (ANSI) specification Z245.1-84: Safety Requirements for Refuse Collection and Compaction Equipment. The contractor shall submit written certification to the KO/COR from the equipment anufacturer(s) that the compactor systems being installed for this contract comply with ANSI Z245.1-84, NEMA standards, National Electric Code, and (NFPA 70).5$ - 0
A0006End or Side Ground Load Stationary Compactor with Roll-Off. The compactor chutes shall be constructed of 10 gauge or thicker steel on top and sides and 1/4 inch steel on bottom and shall be reinforced and anchored to insure structural rigidity. Chutes shall have a 30 in x 48 in or larger inspection door at the
charging chamber.7$ - 0
A0007(15) Cubic Yard Open Top Roll-Off Container.

Roll off containers shall be of heavy-duty steel construction that meets or exceeds the standards established by the American National Standards Institute (ANSI) for waste containers as follows: Waste Containers Safety Requirements, 1994, American National Standards Institute, ANSI Z245.30-1994; and Waste Containers Compatibility Dimensions, 1996, American National Standards Institute, ANSI Z245.60-1996 as referenced in 40 Code of Federal Regulations (Guidelines For

The Storage and Collection of Residential, Commercial, And Institutional Solid Waste) 243.200-1. Containers shall be equipped with a 1-1/2 in nominal diameter threaded drain and plug on each container.5$ - 0
A0008(40) Cubic Yard Open Top Roll-Off Container. Roll off containers shall be of heavy-duty steel construction that meets or exceeds the standards established by the American National Standards Institute (ANSI) for waste containers as follows: Waste Containers Safety Requirements, 1994, American National Standards Institute, ANSI Z245.30-1994; and Waste Containers Compatibility Dimensions, 1996, American National Standards Institute, ANSI Z245.60-1996 as referenced in 40 Code of Federal Regulations (Guidelines For The Storage And Collection Of Residential, Commercial, And Institutional Solid Waste) 243.200-1. Containers shall be equipped with a 1-1/2 in nominal diameter threaded drain and plug on each container.16$ - 0
A0009Twenty Five (25) locations on Red River Army Depot, where the Roll-Off Container of Non-Hazardous waste can be relocated Red River Army Depot maintains a roll-off truck to switch out roll-offs of Non – Hazardous waste at waste collection sites on depot when they are full. There are occasions when this vehicle is inoperable and the contractor, upon the request of the KO/COR, will be asked to provide this service. Only Actuals will be paid by the Government.25$ - 0
A0010Transportation of Full Containers to Landfill, Except those for Sawdust, Wood, and Dust Collectors300$ - 0
A0011Unscheduled Pick UP IAW PWS 1.1.3 Service Delivery SummaryN/AUnit PriceN/A
Unscheduled Pick UP 4 CUBIC YARD ContainerN/AN/A
Unscheduled 8 CUBIC YARD Container without Sliding LidsN/AN/A
Unscheduled 8 CUBIC YARD Container with Sliding LidsN/AN/A
Unscheduled 8 CUBIC YARD Container Modified SawdustN/AN/A
Unscheduled 40-42 CUBIC YARD Container Dock Load or Thru-wall Sta.N/AN/A
Unscheduled End or Side Ground Load Stationary Compactor with Roll-ON/AN/A
Unscheduled 15 Cubic Yard Open Top Roll off ContainerN/AN/A
Unscheduled 40 CUBIC YARD Open Top Roll offN/AN/A
SUBTOTALOPTION YEAR 3$ - 0

OY 3

CLINELINDescriptionEstimated Qty Per MonthUnit PriceTotal Price Per Year
CLINOPTION YEAR 3 (Three)
3001A0001FOUR (4) Cubic Yard per ANSI Z245.30-1994 Shall be heavy-duty steel construction that meets or exceeds the standards

established by the American National Standards Institute (ANSI) for waste containers as follows: Waste Containers Safety Requirements, 1994, American National Standards Institute, ANSI Z245.30-1994; and Waste Containers Compatibility Dimensions, 1996, American National Standards Institute, ANSI Z245.60-1996 as referenced in 40 Code of Federal Regulations (Guidelines For The Storage And Collection Of Residential, Commercial, And Institutional Solid Waste) 243.200-1.

Containers shall be equipped with a 1-1/2 inch nominal diameter threaded drain and plug on each container and equipped with dual lids and lid handles, with lidopening assist springs or approved alternates. Interior height shall be 48 inches plus or minus 2 in.59$ - 0
A0002EIGHT (8) Cubic Yard Container w/o sliding.

Shall be heavy-duty steel construction that meets or exceeds the standards established by the American National Standards Institute (ANSI) for waste containers as follows: Waste Containers Safety Requirements, 1994, American National Standards Institute, ANSI Z245.30-1994; and Waste Containers Compatibility Dimensions, 1996, American National Standards Institute, ANSI Z245.60-1996 as referenced in 40 Code of Federal Regulations (Guidelines For The Storage And Collection Of Residential, Commercial, And Institutional Solid

Waste) 243.200-1. Containers shall be equipped with a 1-1/2 inch nominal diameter threaded drain and plug on each container.45$ - 0
A0003EIGHT (8) Cubic Yard Container with sliding Lids. Shall be heavy-duty steel construction that meets or exceeds the standards established by the American National Standards Institute (ANSI) for waste containers as follows: Waste Containers Safety Requirements, 1994, American National Standards Institute, ANSI Z245.30-1994; and Waste Containers Compatibility Dimensions, 1996, American National Standards Institute, ANSI Z245.60-1996 as referenced in 40 Code of Federal Regulations (Guidelines For The Storage And Collection Of Residential, Commercial, And Institutional Solid Waste) 243.200-1. Containers shall be equipped with a 1-1/2 inch nominal diameter threaded drain and plug on each container. Each container shall be equipped with 28 in x 28 in or larger sliding doors (with handles) on each end and with one sliding door with an opening of 30 in x 34 in or greater on the rear lid. Alternate dimensions may be submitted for approval.45$ - 0
A0004EIGHT (8) Cubic Yard Container Modified for Sawdust. Container Modified for Sawdust Collection Per Month. This one (1) container requires a metal lid modified to accept sawdust from a collector system. This will require a minimum of six (6) inch to eight (8) inch diameter opening in the metal lid.1$ - 0
A0005Dock Load/Thru-Wall Stationary Compactor with 40-42 Cubic Yard Container.Compactor system shall conform to American National Standards Institute (ANSI) specification Z245.1-84: Safety Requirements for Refuse Collection and Compaction Equipment. The contractor shall submit written certification to the KO/COR from the equipment anufacturer(s) that the compactor systems being installed for this contract comply with ANSI Z245.1-84, NEMA standards, National Electric Code, and (NFPA 70).5$ - 0
A0006End or Side Ground Load Stationary Compactor with Roll-Off. The compactor chutes shall be constructed of 10 gauge or thicker steel on top and sides and 1/4 inch steel on bottom and shall be reinforced and anchored to insure structural rigidity. Chutes shall have a 30 in x 48 in or larger inspection door at the
charging chamber.7$ - 0
A0007(15) Cubic Yard Open Top Roll-Off Container.

Roll off containers shall be of heavy-duty steel construction that meets or exceeds the standards established by the American National Standards Institute (ANSI) for waste containers as follows: Waste Containers Safety Requirements, 1994, American National Standards Institute, ANSI Z245.30-1994; and Waste Containers Compatibility Dimensions, 1996, American National Standards Institute, ANSI Z245.60-1996 as referenced in 40 Code of Federal Regulations (Guidelines For

The Storage and Collection of Residential, Commercial, And Institutional Solid Waste) 243.200-1. Containers shall be equipped with a 1-1/2 in nominal diameter threaded drain and plug on each container.5$ - 0
A0008(40) Cubic Yard Open Top Roll-Off Container. Roll off containers shall be of heavy-duty steel construction that meets or exceeds the standards established by the American National Standards Institute (ANSI) for waste containers as follows: Waste Containers Safety Requirements, 1994, American National Standards Institute, ANSI Z245.30-1994; and Waste Containers Compatibility Dimensions, 1996, American National Standards Institute, ANSI Z245.60-1996 as referenced in 40 Code of Federal Regulations (Guidelines For The Storage And Collection Of Residential, Commercial, And Institutional Solid Waste) 243.200-1. Containers shall be equipped with a 1-1/2 in nominal diameter threaded drain and plug on each container.16$ - 0
A0009Twenty Five (25) locations on Red River Army Depot, where the Roll-Off Container of Non-Hazardous waste can be relocated Red River Army Depot maintains a roll-off truck to switch out roll-offs of Non – Hazardous waste at waste collection sites on depot when they are full. There are occasions when this vehicle is inoperable and the contractor, upon the request of the KO/COR, will be asked to provide this service. Only Actuals will be paid by the Government.25$ - 0
A0010Transportation of Full Containers to Landfill, Except those for Sawdust, Wood, and Dust Collectors300$ - 0
A0011Unscheduled Pick UP IAW PWS 1.1.3 Service Delivery SummaryN/AUnit PriceN/A
Unscheduled Pick UP 4 CUBIC YARD ContainerN/AN/A
Unscheduled 8 CUBIC YARD Container without Sliding LidsN/AN/A
Unscheduled 8 CUBIC YARD Container with Sliding LidsN/AN/A
Unscheduled 8 CUBIC YARD Container Modified SawdustN/AN/A
Unscheduled 40-42 CUBIC YARD Container Dock Load or Thru-wall Sta.N/AN/A
Unscheduled End or Side Ground Load Stationary Compactor with Roll-ON/AN/A
Unscheduled 15 Cubic Yard Open Top Roll off ContainerN/AN/A
Unscheduled 40 CUBIC YARD Open Top Roll offN/AN/A
SUBTOTALOPTION YEAR 3$ - 0

OY 4

CLINELINDescriptionEstimated Qty Per MonthUnit PriceTotal Price Per Year
CLINOPTION YEAR 4 (Four)
4001A0001FOUR (4) Cubic Yard per ANSI Z245.30-1994 Shall be heavy-duty steel construction that meets or exceeds the standards

established by the American National Standards Institute (ANSI) for waste containers as follows: Waste Containers Safety Requirements, 1994, American National Standards Institute, ANSI Z245.30-1994; and Waste Containers Compatibility Dimensions, 1996, American National Standards Institute, ANSI Z245.60-1996 as referenced in 40 Code of Federal Regulations (Guidelines For The Storage And Collection Of Residential, Commercial, And Institutional Solid Waste) 243.200-1.

Containers shall be equipped with a 1-1/2 inch nominal diameter threaded drain and plug on each container and equipped with dual lids and lid handles, with lidopening assist springs or approved alternates. Interior height shall be 48 inches plus or minus 2 in.59$ - 0
A0002EIGHT (8) Cubic Yard Container w/o sliding.

Shall be heavy-duty steel construction that meets or exceeds the standards established by the American National Standards Institute (ANSI) for waste containers as follows: Waste Containers Safety Requirements, 1994, American National Standards Institute, ANSI Z245.30-1994; and Waste Containers Compatibility Dimensions, 1996, American National Standards Institute, ANSI Z245.60-1996 as referenced in 40 Code of Federal Regulations (Guidelines For The Storage And Collection Of Residential, Commercial, And Institutional Solid

Waste) 243.200-1. Containers shall be equipped with a 1-1/2 inch nominal diameter threaded drain and plug on each container.45$ - 0
A0003EIGHT (8) Cubic Yard Container with sliding Lids. Shall be heavy-duty steel construction that meets or exceeds the standards established by the American National Standards Institute (ANSI) for waste containers as follows: Waste Containers Safety Requirements, 1994, American National Standards Institute, ANSI Z245.30-1994; and Waste Containers Compatibility Dimensions, 1996, American National Standards Institute, ANSI Z245.60-1996 as referenced in 40 Code of Federal Regulations (Guidelines For The Storage And Collection Of Residential, Commercial, And Institutional Solid Waste) 243.200-1. Containers shall be equipped with a 1-1/2 inch nominal diameter threaded drain and plug on each container. Each container shall be equipped with 28 in x 28 in or larger sliding doors (with handles) on each end and with one sliding door with an opening of 30 in x 34 in or greater on the rear lid. Alternate dimensions may be submitted for approval.45$ - 0
A0004EIGHT (8) Cubic Yard Container Modified for Sawdust. Container Modified for Sawdust Collection Per Month. This one (1) container requires a metal lid modified to accept sawdust from a collector system. This will require a minimum of six (6) inch to eight (8) inch diameter opening in the metal lid.1$ - 0
A0005Dock Load/Thru-Wall Stationary Compactor with 40-42 Cubic Yard Container.Compactor system shall conform to American National Standards Institute (ANSI) specification Z245.1-84: Safety Requirements for Refuse Collection and Compaction Equipment. The contractor shall submit written certification to the KO/COR from the equipment anufacturer(s) that the compactor systems being installed for this contract comply with ANSI Z245.1-84, NEMA standards, National Electric Code, and (NFPA 70).5$ - 0
A0006End or Side Ground Load Stationary Compactor with Roll-Off. The compactor chutes shall be constructed of 10 gauge or thicker steel on top and sides and 1/4 inch steel on bottom and shall be reinforced and anchored to insure structural rigidity. Chutes shall have a 30 in x 48 in or larger inspection door at the
charging chamber.7$ - 0
A0007(15) Cubic Yard Open Top Roll-Off Container.

Roll off containers shall be of heavy-duty steel construction that meets or exceeds the standards established by the American National Standards Institute (ANSI) for waste containers as follows: Waste Containers Safety Requirements, 1994, American National Standards Institute, ANSI Z245.30-1994; and Waste Containers Compatibility Dimensions, 1996, American National Standards Institute, ANSI Z245.60-1996 as referenced in 40 Code of Federal Regulations (Guidelines For

The Storage and Collection of Residential, Commercial, And Institutional Solid Waste) 243.200-1. Containers shall be equipped with a 1-1/2 in nominal diameter threaded drain and plug on each container.5$ - 0
A0008(40) Cubic Yard Open Top Roll-Off Container. Roll off containers shall be of heavy-duty steel construction that meets or exceeds the standards established by the American National Standards Institute (ANSI) for waste containers as follows: Waste Containers Safety Requirements, 1994, American National Standards Institute, ANSI Z245.30-1994; and Waste Containers Compatibility Dimensions, 1996, American National Standards Institute, ANSI Z245.60-1996 as referenced in 40 Code of Federal Regulations (Guidelines For The Storage And Collection Of Residential, Commercial, And Institutional Solid Waste) 243.200-1. Containers shall be equipped with a 1-1/2 in nominal diameter threaded drain and plug on each container.16$ - 0
A0009Twenty Five (25) locations on Red River Army Depot, where the Roll-Off Container of Non-Hazardous waste can be relocated Red River Army Depot maintains a roll-off truck to switch out roll-offs of Non – Hazardous waste at waste collection sites on depot when they are full. There are occasions when this vehicle is inoperable and the contractor, upon the request of the KO/COR, will be asked to provide this service. Only Actuals will be paid by the Government.25$ - 0
A0010Transportation of Full Containers to Landfill, Except those for Sawdust, Wood, and Dust Collectors300$ - 0
A0011Unscheduled Pick UP IAW PWS 1.1.3 Service Delivery SummaryN/AUnit PriceN/A
Unscheduled Pick UP 4 CUBIC YARD ContainerN/AN/A
Unscheduled 8 CUBIC YARD Container without Sliding LidsN/AN/A
Unscheduled 8 CUBIC YARD Container with Sliding LidsN/AN/A
Unscheduled 8 CUBIC YARD Container Modified SawdustN/AN/A
Unscheduled 40-42 CUBIC YARD Container Dock Load or Thru-wall Sta.N/AN/A
Unscheduled End or Side Ground Load Stationary Compactor with Roll-ON/AN/A
Unscheduled 15 Cubic Yard Open Top Roll off ContainerN/AN/A
Unscheduled 40 CUBIC YARD Open Top Roll offN/AN/A
SUBTOTALOPTION YEAR 4$ - 0

File details come from the government source that posted it. Updated .