Atch 01 - Purchase Description.pdf

Attachment 01 - Purchase Description

All salient characteristics (specifications) for the proposed electric forklift and charging station shall meet or exceed the specifications outlined in the product description below.

The following is required:

LINE ITEM #: 0001

ITEM: Front Load Automatic Parts Washer QUANTITY / UNIT: 5 / Each

Salient Characteristics (specifications):

This description is for five front-load automatic aqueous parts washers to be placed at FMS 5, 10, 12, 15, UTES (locations in Iowa listed below). Parts washers shall be rugged and high capacity using pressurized hot water and industrial detergents to clean parts.

1. FEATURES:

• Front Load Parts Washer

• Commercial washing chamber roll in door

• Control panel with low-water indicator light, Automatic low-water shut off

• Built in oil skimmer (example: belt driven)

• Programable wash-cycle timer, 24 hr/7 day heater and skimmer timers

• Rotating turntable with drive system

• turn table on/off switch

• Vertical wash pump

• Heater: Electrical heating element with wash nozzle(s)

• Retractable intermediate spray arm

• Removable debris screen

• Two- tier turntable

• Drop in parts tree

• Small parts basket

• Fork accessible Chip Basket

• Automatic water fill

• Item Unique Identification (IUID) Labels (5 each)

• One year on-site parts and labor warranty

2. SPECIFICATIONS:

• Electrical specification (see delivery location for address):

o 2 each 220 V 1 phase (FMS 12, UTES) o 1 each 220 V 3 phase (FMS 15) o 2 each 240 V 1 phase (FMS 5, FMS 10)

• Equipment size specifications:

o Approximate equipment dimensions 45L x 70W X 80 H o Minimum 48” working height (turntable height) o Minimum 28” turntable diameter o Minimum 750 pound turntable load capacity o Minimum of 5 HP pump motor o Minimum 110 gallon pump minute (GPM) pump capacity at a minimum of 50 pounds per square inch (PSI) o Minimum 50 gallon sump capacity o Operating temperature of between 150-170 degrees o Minimum 28” containment ring

LINE ITEM #: 0002

ITEM: 5-Gallon bucket of detergent QUANTITY / UNIT: 5 / Each

LINE ITEM #: 0003

ITEM: Delivery, installation, and onsite training at five separate locations QUANTITY / UNIT: 5 / Each

Vendor shall deliver, install, and provide parts washer training to facility personnel upon completion of installation.

• Delivery/Install/Training Address:

o Qty: 1

FMS 5

1160 SW 19th St, Mason City, IA 50401 POC CW2 Mark Kruse Phone: 641-242-5418

FMS 10

700 Snedden Dr, Boone, IA 50036 POC WO1 Doug Horness Phone: 515-4321-8756

FMS 12

505 W Carpenter Ave, Fairfield, IA 52556 POC CW3 Erik Cluney Phone: 641-472-4456

FMS 15

16815 DMC Hwy 34, Middletown, IA 52623 POC CW3 Doug Griffin Phone: 319-752-5909

UTES

7105 NW 70th Ave, Camp Dodge, Johnston, IA 50131 POC CW2 Andrew Hirsh Phone: 515-252-4793

End items with a unit price of $5,000 and above require an Item Unique Identification Label per DFARS Clause 252.211-7003 - Item Unique Identification and Valuation. See Attachment 02, Provisions and Clause for full text clause.

////NOTHING FOLLOWS\\\\