Appendix I_Examples of Hazardous Materials.pdf

PDF 100 KB Posted

Attached to
Fort Riley Packing and Crating
Solicitation number
W911RX-22-R-0005
Issued by

View the file

Other files

Show all 17

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

Defense Transportation Regulation – Part IV 12 August 2013 Personal Property

IV-I-1

APPENDIX I

EXAMPLES OF HAZARDOUS MATERIALS

A. COMBUSTIBLE LIQUIDS

Alcoholic beverages (any single container exceeding one gallon capacity)

Alcohols

Antifreeze compounds

Camphor oil

Fluid cleaners (containing combustible materials, e.g., spot clothing cleaners and office machine cleaners).

B. CORROSIVE LIQUIDS

Acids--muriatic, nitric, photographic, sulfuric

Battery with acid

Disinfectants

Dyes

Flame retardant compounds

Iron/steel rust preventing/rust removing compounds

Paint and paint related materials.

C. EXPLOSIVES

Ammunition

Black powder

Blasting caps

Dynamite, plastics or any similar explosives

Explosive auto alarms

Fireworks

Fuse lighters

Igniters

Primers

Propellants

Signal flares

Smokeless powder

Souvenir explosive instruments of war

Spear guns having charged heads

Toy propellants or smoke devices.

D. FLAMMABLES

Acetone

Adhesives (glues, cements and plastics)

Ammonia

Charcoal briquettes

Cleaning fluids

Compound 3 weed killers

Denatured alcohol

Enamel

Gasoline

Insecticides

Defense Transportation Regulation – Part IV 12 August 2013 Personal Property

IV-I-2

Kerosene

Lacquer

Leather dressing or bleach

Lighter fluids (pocket, charcoal, camp stove, lamp or torch)

Liquors (any single container exceeding one gallon capacity)

Matches

Oil stains for wood

Paint

Paint or varnish remover

Petroleum products

Polishes, liquid (metal, stove, furniture and wood)

Propane or other gas used for cooking or heating purposes

Propane tanks

Shellac

Shoe polish (liquid)

Solvents, plastic

Stains

Turpentine

Varnish

Wood filler.

E. GASES, COMPRESSED

Engine starting fluids

Fire extinguishers

Gases used in welding

Scuba diving tanks (see note below).

F. AEROSOL CAN

Containing a Flammable Gas, Flammable Liquid, Toxic, or Corrosive Substance

G. CHLORINATED HYDROCARBONS IN DECORATIVE LAMPS

H. OTHER REGULATED MATERIAL TERMED COMBUSTIBLE, CORROSIVE, OR

FLAMMABLE

NOTE 1: Only those scuba diving tanks containing not more than 25 pounds per square inch at 70 degrees Fahrenheit may be shipped as household goods or unaccompanied baggage. Servicing for shipment will include:

a. Written certification of purging serviced by dive shop or licensed individual qualified to perform purging. A tag or label must be affixed to the tank certifying service was performed.

b. Completely empty tank, remove the valve, and replace valve with plug designed for this purpose.

NOTE 2: Completely drain all fuel from engine power driven equipment. Drain equipment (motorcycle, moped, lawn mowers, boats, snowmobiles.). Run until engine stalls. Drain all oil and water. Allow the fuel tank and lines to remain open for 24 hours prior to pickup. Disconnect nonspillable gel-type batteries and tape the ends to prevent short circuit. Only nonspillable gel-type batteries are authorized. The batteries may remain in the equipment holder, but ensure they remain upright when packed in the shipping container. Batteries with acid or alkali are prohibited from shipment.

File details come from the government source that posted it. Updated .