226169.pdf

PDF created by SpeXtra Page 1

Catalog Cuts for

USDA Forest Service - Groveland Hotshots Office and Garage

Sorted by Manufacturer

Prepared By

KAREE WALLACE, AHC

ALLEGION, PLC

6689 OWENS DRIVE, SUITE 200

PLEASANTON CA

Phone (925) 462-4777 Fax (925) 846-5952

Created 11/10/2015

Project: USDA Forest Service - Groveland Hotshots Office and Garage

Control #: 226169 Print Date: Nov 10 2015

4:12PM EST

Company: Allegion, PLC Version #: 1 Ver Date: Nov 10 2015

1:12PM EST

Catalog Cut Summary

Mfr Description Catalog Number Cut Page Number

GLY OH STOP 100S GLY_0004

IVE FLOOR STOP FS436 IVE_0227

IVE SILENCER SR64 IVE_0148

IVE KICK PLATE 8400 10" X 2" LDW

B4E

IVE_0223

LCN SURFACE CLOSER 4040XP LCN_4040XP

LCN SURFACE CLOSER 4040XP REG OR PA

AS REQ

LCN_4040XP

NGP SEALS 5050B NGP_0050

NGP DOOR BOTTOM 35VA NGP_0068

NGP DOOR SWEEP 200NA NGP_0070

SCH CLASSROOM LOCK LV9070T 06A SCH_0011

SCH FSIC CORE 23-030 SCH_CYL_FSIC

SCH STOREROOM LOCK LV9080T 06A SCH_0011

SCH OFFICE/ENTRY

LOCK

L9050T 06A SCH_0011

SCH STOREROOM LOCK L9080T 06A SCH_0011

SCH PRIVACY LOCK L9040 06A L583-

363 L283-722

SCH_0011

SCH PASSAGE SET L9010 06A SCH_0011

SCH CLASSROOM LOCK L9070T 06A SCH_0011

STA HINGE FBB179 4.5 X 4.5 STA_0001

STA HINGE FBB199 4.5 X 4.5 STA_0002

STA HINGE FBB168 4.5 X 4.5 STA_0002

100 Series Concealed Overhead Door Holders/Stops

100 Series Heavy-Duty Glynn-Johnson offers a complete line of overhead door holders and stops, accommodating virtually all openings with solutions for even the most complex door control problems. These concealed holders and stops provide the most attractive and reliable heavy-duty door control available.

Glynn-Johnson 100 series holders and stops provide the most reli-able and versatile concealed overhead door control. They are designed for installation on virtually all types of doors mounted on conventional type butt hinges, pivots, continuous hinges, swing clear hinges and numerous other specialty hinges. When used in conjunction with many surface-applied door closers, 100 series holders and stops provide the most effective control for entrance doors and vestibule doors of all types, as well as heavy or often used interior doors. Templates provided allow for variable mounting positions, ranging from 85° - 110° of opening.

Five Models:

• 100H Series Hold-Open Model

• 100HP Series Internal Hold-Open Model

• 100F Series Friction Hold-Open Model

• 100S Series Stop-Only Model

• 100SE Series Special Stop-Only Model

Six Sizes:

• Each model comes in six sizes.

• Simple

• Standardized

Three Options:

• ADJ—Adjustable Jamb Bracket

• CJ—Jamb Bracket for use with LCN5030 Closer

• SOC—Pin-in-Socket Security Screw Package

Unmatched Convenience:

• Non-handed

• Improved Compatibility with Door Closers

• Single/Double-Acting Doors

• Interior/Exterior Applications

• Reduced Door Prep

• Durable

• Improved Corrosion Resistance

• Function Conversion Kits are Available.

Materials and Finishes:

In Heavy Gauge Brass or 300 Series Stainless Steel, these models offer the broadest range of finishes in the industry, complementing any design and offering the highest resistance to corrosion.

Available in the following finishes:

Finishes Description US3 Polished Brass US4 Satin Brass US10 Satin Bronze US10B Oil Rubbed Bronze US32 Polished Stainless Steel US32D Satin Stainless Steel SP4 Powder Coat Brass SP10 Powder Coat Bronze SP28 Powder Coat Aluminum SP313 Powder Coat Dark Bronze SPBLK Powder Coat Black

Models These models provide a wide range of optional features, and are ideal for use on entrance and vestibule doors, large doors, doors opened frequently, or doors subject to abuse. These models are also furnished with an offset-style jamb bracket.

Designed for heavy-duty applications, 100 series models will provide long-lasting protection to doors, frames, hinges, related hardware and surrounding walls or obstructions.

100H Series Hold-Open (Suffix H) The Hold-Open function should be used where it is desired to hold a door open at a predetermined position for short or long periods of time, permitting an unobstructed traffic flow through the opening.

These models are both selective and adjustable, featuring the most reliable Hold-Open mechanism available. They feature a control knob which protrudes from the face of the door and turns the Hold-Open function on or off. Set in the inactive position, the unit acts as a stop and shock absorber. The tension on the Hold-Open mechanism can be adjusted using an allen wrench to offset air currents or other exterior conditions. The Hold-Open tension adjustment is located in the bottom of the track in the top of the door.

100HP Series Internal Hold-Open These models provide a Hold-Open unit with the Hold-Open mechanism built into the channel, thus reducing the door prep.

The 100HP have a preset Hold-Open force that is not adjustable.

The Hold-Open feature is not selectable in these units, so the doors are always held open.

100F Series Friction Hold-Open (Suffix F) Friction Hold-Open models provide an alternative holding method, ideal for heavy patient room doors, closet doors or similar applications where multiple Hold-Open positions are desired. The friction tension is adjusted using an allen wrench and an open end wrench. The friction tension adjustment is located on the top of the slider in the channel.

100S Series Stop-Only (Suffix S) When the Hold-Open function is not required, the Stop-Only function provides the same effective door control minus the Hold-Open feature. The Stop-Only model may be used on fire doors.

100SE Series Special Stop-Only (Suffix SE) When Stop-Only models are used in conjunction with single point Hold-Open electronic door closers, they may be ordered without the shock-absorbing mechanism. Used as an auxiliary stop with these closers, they will prolong the life of the closer. The stop location is adjusted using an allen wrench on the stop block located in the channel.

Note: Caution should be used when using this option in other applications, as the elimination of the shock-absorbing spring can put added stress on door and frame if used improperly.

Application Information UL Classification The 100 series Stop-Only models are classified by Underwriters Laboratories (UL) as Miscellaneous Fire Door Accessories. This classification applies to use on either Hollow Metal Fire Doors or Wood Fire Doors. Where Wood Door manufacturer’s listing allows for the cutout required for installation, concealed overhead stops may be used on those wood fire doors. These units may be used on doors of any rating. As a reminder, the Miscellaneous Fire Door Accessories (GVUX) section is defined by UL as: “Miscellaneous fire door accessories are intended in the individual Listings. The accessories have been investigated to determine that when installed in accordance with the manufacturer’s instructions, the accessories do not adversely affect the fire rating of the fire door and/or fire door frames.”

Dead Stop Templating:

If a wall or similar obstruction is in place at 110° or less opening angle (i.e. doors that open back-to-back), Dead Stop Templating should be used. This includes all Hold-Open, Friction and Stop-Only models, except when the “SE” Option is used. The Dead Stop position is reached when the shock-absorbing spring is fully compressed, the initial degree of opening will be 5° to 7° less than the Dead Stop opening.

Example: If the holder is templated to 100° Dead Stop, the door will hold open somewhere between 93° and 95°, but no further than 100°.

Note: Do not use dead-stop templating on the 100SE Series since there is no shock-absorbing spring.

Environmental Considerations:

Environmental factors should always be considered when specifying overhead holders and stops. Doors that are positioned on a building’s exterior or subject to corrosive conditions should be equipped with a holder constructed primarily of stainless steel or brass materials. For interior applications, steel is acceptable, though brass substrates generally provide a more attractive architectural-grade finish.

Function Conversion Kits

• FK100F—Converts a 100H or 100S unit into a 100F unit.

To order specify FK100F.

• FK100H—Converts a 100F or 100S unit into a 100H unit.

To order specify FK100H.

• No kit is needed to convert a 100H or 100F unit into a 100S unit.

Options Suffix ADJ (Adjustable Jamb Bracket):

An additional option on the 100 series is the adjustable jamb bracket, which allows the degree of Hold-Open or Stop angle to be adjusted after installation. Suffix “ADJ” is available in all functions, but only in sizes 3, 4, 5 & 6. ADJ jamb bracket requires additional frame prep.

The ADJ option cannot be added to an existing unit, it must be factory ordered.

Suffix CJ (Closer Jamb Bracket):

Provides a special jamb bracket needed for 100 series units used with LCN5030 closers. These special jamb brackets are handed, so handing will need to be specified when ordering the “CJ” option, CJLH for a left hand door and CJRH for a right hand door. The CJ option cannot be added to an existing unit, it must be factory ordered.

Suffix SOC (Pin-in-Socket Security Screw Package):

A screw package with pin-in-socket screws for mounting the jamb bracket to the frame is provided instead of the standard screw package.

100 Series Concealed Overhead Door Holders/Stops

The template information on this page is for reference only and is not intended to serve as an installation template.

For complete dimensional information, refer to Glynn-Johnson template book.

1-1/4" 1"

1/4"

1-1/4" 1"

2"

3/4"

3/8"

4-1/4"

1-1/4"

2-3/8" 5-1/2"

1/4"

3/4"

1"

1/4"

3-1/2"

1-1/4"

1/2"

3/8"

12"

BUTTS/OFFSET PIVOTS CENTER HUNG

DOOR STOP HOLD DOOR STOP HOLD

SIZE OPENING ONLY OPEN FRICTION OPENING ONLY OPEN FRICTION

1 18"–23" 101S* 101H* 101F* ----- ---- ---- ---- 2 23-1/16"–27" 102S* 102H* 102F* ----- ----- ----- ----- 3 27-1/16"–33" 103S 103H 103F 33-1/16"–39" 103S 103H 103F 4 33-1/16"–39" 104S 104H 104F 39-1/16"–45" 104S 104H 104F 5 39-1/16"–45" 105S 105H 105F 45-1/16"–51" 105S 105H 105F 6 45-1/16"–54" 106S 106H 106F 51-1/16"–59" 106S 106H 106F

100 Series Sizing Chart

* First numeral (0) designates optional material.

To specify:

Brass material, change 0 to 1 (i.e. C11511) Stainless Steel material, change 0 to 5 (i.e. C51511)

Note: This chart illustrates the most common types of hinging and door opening sizes.

For unusual door details, contact Glynn-Johnson for availability.

*These sizes are not available for use with offset pivots. Also not available with the ADJ option.

BHMA

All 100 series models are designed for heavy-duty applications and far exceed BHMA cycle test and force test requirements for Grade 1 holders and stops.

BHMA/ANSI, A156.8 & FED. Spec. Cross Reference G-J Model BHMA* FED. Spec.

101-106 H C01511 1160 101-106 S C01541 ---- 101-106 F C01531 ----

How to Order

Overhead Series:

Size (Door Opening Using Butts or Offset Pivots:

1 (18"–23") 2 (23-1/16"–27") 3 (27-1/16" –33") 4 (33-1/16"–39") 5 (39-1/16"–45") 6 (45-1/16"–54")

Function:

H Hold-Open HP Internal Hold-Open F Friction Hold-Open S Stop-Only SE Special Stop-Only

Finishes:

US3 Polished Brass US4 Satin Brass US10 Satin Bronze US10B Oil Rubbed Bronze US32 Polished Stainless Steel US32D Satin Stainless Steel SP4 Powder Coat Brass SP10 Powder Coat Bronze SP28 Powder Coat Aluminum SP313 Powder Coat Dark Bronze SPBLK Powder Coat Black

Options:

ADJ Adjustable Jamb Bracket CJLH Special Jamb Bracket for LCN 5030 Closer, LH Door CJRH Special Jamb Bracket for LCN 5030 Closer, RH Door SOC Pin-in-Socket Security Screws

___ ___ ___ – ______ – ____10 4 H US26D ADJ

Ives Architectural hardware products E23

Door Silencers

B Pulls &

Plates A

H inges &

Pivots C

Flush Bolts & Coordinators

D Latches, Catches &

Bolts E

Stops

F Exterior H ardw are

G M iscellaneous H ardw are

SR64 Door Silencer

• For use on metal frames featuring pneumatic design that, once installed, forms an air pocket to absorb shock and reduce noise of door closing .

tension for door latches or locks .

Packed in bags of 100 .

Grey Available in bulk pack of 2500 .

Each bag has an installation tool included .

Dimensions Diameter: 1/2”

Thickness: 1/8”

Finishes

GRY, TAN

SR65 Door Silencer

• For use on wood frames, also feature pneumatic design to cushion shock and absorb noise .

• To prevent removal, a small brad should be driven into stop strip and through stem of silencer, as shown in the detail .

Packed in bags of 100 .

Dimensions Height: 3/4”

Diameter: 3/8”

Thickness: 1/8”

Finishes

GRY

SR66 Door Silencer

Packed two sheets of 50 (100 minimum) .

Dimensions Diameter: 1/2” Thickness: 1/8”

Finishes

BRN, GRY, WHT

Meets ANSI/BHMA 156 .16, L03011 .

Meets ANSI/BHMA 156 .16, L03021

B14

Protection Plates

B

Pu lls

P la te s A

H in ge s

P iv ot s C

Fl us h Bo lt s &

C oo rd in at or s D

La tc he s, C at ch es

B ol ts

E St op s F

Ex te rio r H ar dw ar e

G M is ce lla ne ou s H ar dw ar e

8400 Series Protection Plates

• Door protection plates are available in .050” thick brass, stainless steel or aluminum; and 1/8” thick high impact polyethylene in clear or black .

Optional screw packs are available for TEK or TORK screw heads .

Refer to the following chart for ordering .

Kickplate Gasket Tape Tape is recommended when using a brass plate on a metal door to reduce tarnishing from electrolytic oxidation . One tape pack will cover an the perimeters of a 8” x 34” kickplate . Order 8401 Gasket Tape .

8400 Protection Plate 8402 (UL)* Protection Plate *UL mark appears in upper right corner. Factory supplied screws must be used.

Number of screw packs required by plate size (specify TEK Screws or TORK screws) .

22”-25” 26”-33” 34”-41” 42”-48” 4”-8” 1 1 1 1 9”-16” 1 1 1 1 17”-24” 1 1 1 2 25”-32” 1 1 2 2 33”-40” 1 2 2 2 41”-48” 2 2 2 2

Finishes brass 24” x 48” max. size US Number US3 US4 US10 US10B US15 US26 US26D

BHMA 605 606 612 613 619 625 626

Finishes stainless steel US Number US32 US32D

BHMA 629 630

Finishes aluminum US Number US28

BHMA 628

Finishes plastic Clear and Black

Residential Grade Kickplates available Carded only, finishes PA28, PA3, PA619, PA716, B3, B505, B619, B716

B18

Protection Plates

B

Pu lls

P la te s A

H in ge s

P iv ot s C

Fl us h Bo lt s &

C oo rd in at or s D

La tc he s, C at ch es

B ol ts

E St op s F

Ex te rio r H ar dw ar e

G M is ce lla ne ou s H ar dw ar e

Mop Plates

• Protect the bottom of the pull side of door subject to cleaning and mopping procedures .

• Size Ranges:4” to 6” high, 22” to 48” wide

Kick Plates

• Protect the bottom of the push side of doors subject to scuffing from foot traffic .

• Recommended for all doors subject to normal use

(especially doors using a closer) .

• Size Ranges: 8” to 24” high, 22” to 48” wide

Stretcher Plates

• Protect doors at specific areas where consistent contact is made by stretchers, service carts or other equipment .

Armor Plates

• Protect lower half of doors from abuse by hard carts, trucks and rough usage .

• Usually applied to push side of single doors and both sides of double acting doors .

• Size Ranges: 26” to 48” high, 22” to 48” wide

E3

Floor Stops — Dome

B Pulls &

Plates A

H inges &

Pivots C

Flush Bolts & Coordinators

D Latches, Catches &

Bolts E

Stops

F Exterior H ardw are

G M iscellaneous H ardw are

FS436 Dome Stop FS438 Dome Stop

Replaceable gray, non-marring rubber bumper .

Dimensions

FS436

Overall Height: 1” Base Height: 3/16” Base Diameter: 1-3/4” x 2” Oval

PAD

FLOOR

1" OR

LESS

1"

1-7/16"

R435 Riser for FS436 Dome Stop R437 Riser for FS438 Dome Stop

Specify Tampin (TPN) if required .

Dimensions Available in 1/4”, 3/8”, 1/2”, 5/8”, 3/4” and 1” height .

FS438

Meets ANSI/BHMA 156 .16, L12141 for brass or bronze and L32141 for aluminum .

Finishes brass Ives Number US3 US4 US5 US10 US10B US15 US26 US26D B716

BHMA 605 606 609 612 613 619 625 626

Finishes aluminum Ives Number US28

BHMA 628

FS436

Meets ANSI/BHMA 156 .16, L12141 for brass or bronze and L32141 for aluminum .

FS438

Overall Height: 1-3/8” Base Height: 9/16” Base Diameter: 1-3/4” x 2” Oval

36 37

PHONE 877-671-7011

FAX 800-248-1460

www.allegion.com/us 2/14 n Standard 4040XP Series closer shipped with regular arm, standard plastic cover, and self reaming and tapping screws.

n Non-sized cylinder is adjustable for interior doors to 5’0” and exterior doors to 4’0”.

n Closer mounts hinge side, top jamb, and parallel arm on either right or left swinging doors.

n Closers to meet ADA requirements.

n Standard or optional custom powder coat finish.

n Optional plated finish on cover, arm, and fasteners.

n Optional SRI primer for installations in corrosive conditions. (Available with powder coat finishes only.)

n UL and cUL listed for self-closing doors without hold-open.

n Tested and certified under ANSI Standard A156.4, grade one.

The 4040XP is LCN’s most durable and flexible heavy duty closer designed for institutional and other demanding high traffic applications.

Accurate Installation

CLOSER MOUNTS

*HINGE (PULL) SIDE

TOP JAMB (PUSH SIDE)

PARALLEL ARM (PUSH SIDE)

*HINGE (pull) side mount shown

AVAILABLE

NOT AVAILABLE

4040XP SERIES

FE

AT

UR

ES

The 4040XP Series includes the LCN® "Green Dial"

Spring Force Indicator

Closer available with less than 5.0 lbs. opening force on 36˝ door.

** Maximum opening/hold-open point with standard template.

*** Advanced Variable Backcheck.

**** Delayed Action Closer incorporates standard 4041 Delay Cylinder.

PLA

STIC

META

L

HIN

GE (P

ULL

) S

ID

E

TOP JAMB (P

ULL

TOP JAMB (P

USH)

PARALL

EL A

RM

STOP FA

CE

MOUNTING COVER

120° 120° 180° 110°110°

STA

NDARD (S

INGLE)

REG

ULA

R (D

OUBLE)

HOLD

-O

PEN

FU

SIB

LE

LI

NK

EDA/H

EDA

CUSH/H

CUSH

SCUSH/SHCUSH

DOUBLE

EGRESS

**ARM FUNCTIONFINISH CYLINDER

NON-H

ANDED

NON-S

IZED

ACCESSIB

ILI

TY

DELAYED ACTION***

AVB**

POW

DER COAT

PLA

TED

FAX 800-248-1460

www.allegion.com/us 2/14

HINGE (PULL) SIDE

MOUNTING

MAXIMUM OPENING

Templating allows up to 120°.

Hold-open points 90° up to 120° with hold-open arm.

n Butt Hinges should not exceed 5” (127 mm) in width.

n Auxiliary Stop is recommended at hold-open point or where a door cannot swing beyond 120°.

n Reveal should not exceed 3/4” (19 mm) for regular arm or hold-open arm.

n Top Rail less than 3-3/4” (95 mm) requires PLATE, 4040XP-18. Plate requires 2” (51 mm) minimum.

n Clearance of 2-3/8” (60 mm) behind door required for 90° installation.

n *Delayed Action Incorporates standard 4041 cylinder, without XP cylinder.

Delays closing from 120° to 70°. Delay time adjustable up to approximately 1 minute.

4040XP SERIES

M

OU

NT

IN

G

DE

TA

IL

S

Options

Special Templates Customized installation templates or products may be available to solve unusual applications.

Contact LCN Product Support for assistance.

38 39

FAX 800-248-1460

www.allegion.com/us 2/14

TOP JAMB (PUSH SIDE)

MOUNTING

MAXIMUM OPENING

Templating allows up to 120°.

Hold-open points 85° up to 120° with hold-open arm.

n Butt Hinges should not exceed 5˝ (127 mm) in width.

n Auxiliary Stop is recommended at hold-open point or where a door cannot swing beyond 120°.

n Reveal of 2-9/16” (65 mm) allows 120° opening for REGULAR ARM or standard Hold-open ARM. 4-13/16” (122 mm) allows up to 120° opening with LONG ARM where standard rod and shoe is replaced with optional LONG ROD AND SHOE 4040XP-79LR. Use H-LONG ARM with LONG HEAD AND TUBE, 4040XP-78HL for hold-open. 8” (203 mm) allows up to 120° opening with EXTRA LONG ARM where standard rod and shoe is replaced with optional EXTRA LONG ROD AND SHOE, 4040XP-79ELR.

n Top Rail requires 1-1/4˝ (32 mm) minimum.

2-1/4˝ (57 mm) minimum with closer on PLATE, 4040XP-18TJ.

3˝ (76 mm) minimum with closer on PLATE, 4040XP-18G.

n Head Frame less than 3-1/2” (89 mm) requires PLATE, 4040XP-18TJ. With flush ceiling, use PLATE, 4040XP-18G. Either plate requires 1-3/4” (44 mm) minimum.

n *Delayed Action Incorporates standard 4041 cylinder, without XP cylinder.

Delays closing from 120° to 70°. Delay time adjustable up to approximately 1 minute.

4040XP SERIES

Options

Customized installation templates or products may be available to solve unusual applications.

Contact LCN Product Support for assistance.

M

OU

NT

IN

G

DE

TA

IL

S

FAX 800-248-1460

www.allegion.com/us 2/14

PARALLEL ARM (PUSH SIDE)

MOUNTING

Optional mounting requires PA SHOE, 4040XP-62PA for regular or HOLD-OPEN arms. Add prefix "P" to closer description

(eg. P4040XP). P4040XP closer includes 4040XP-201 FIFTH HOLE SPACER to support

PA SHOE.

MAXIMUM OPENING

180° opening/hold-open points with all except CUSH arms.

110° opening/hold-open with CUSH arms.

n Butt Hinges should not exceed 5” (127 mm) in width.

n Auxiliary Stop is recommended at hold-open point, where the door cannot swing 180°, or where CUSH-N-STOP arm is not used.

n Clearance for 4040XP-62PA shoe is 4” (102 mm) from door face.

EDA shoe projects 5-1/2” (140 mm) from door face.

CUSH shoe projects 6” (152 mm) from door face.

n Top Rail less than 5-3/8” (137 mm) measured from the stop requires PLATE, 4040XP-18PA. Plate requires 2” (51 mm) minimum from the stop.

n Head Frame flush or rabetted requires PA SHOE ADAPTER, 4040XP-419.

n Stop Width minimum 1” (25 mm). CUSH arm requires minimum 1-1/2” (38 mm).

n Blade Stop clearance requires 1/2˝ (13mm) BLADE STOP SPACER, 4040XP-61.

n *Delayed Action Incorporates standard 4041 cylinder, without XP cylinder. Delays closing from 120° to 70°. Delay time adjustable up to approximately 1 minute.

4040XP SERIES

M

OU

NT

IN

G

DE

TA

IL

S

Options

HCUSH, SPRING CUSH or SPRING HCUSH arm.

n Metal cover.

Special Templates Customized installation templates or products may be available to solve unusual applications.

Contact LCN Product Support for assistance.

40 41

FAX 800-248-1460

www.allegion.com/us 2/14

Mounting details are the same as 4040XP Series REGULAR or

HOLD-OPEN except as listed below.

4040XP Series closers ordered with

EDA or CUSH arms include 4040XP-

201 FIFTH HOLE SPACER to support the shoe.

MAXIMUM OPENING

EDA arm can be templated for points at: 110°, A = 6-3/8” (162 mm) B = 7-3/4” (197 mm) or 180°.

A = 2-7/8” (73 mm) B = 4-1/4” (108 mm)

Hold-open points up to maximum opening with HEDA arm.

CUSH arms can be templated for opening/hold-open point at:

85°, A = 7-15/16” (202 mm) B = 9-1/8” (232 mm)

90°, A = 7-3/16” (183 mm) B = 8-1/2” (216 mm)

100°, A = 6-1/16” (154 mm) B = 7-1/4” (184 mm) or 110°.

A = 5-1/16” (129 mm) B = 6-3/8” (162 mm)

Spring Cush dead stop points are approximately 5 ̊more than templated stop point. Hold open at templated stop points.

n Clearance for 4040XP-62EDA is 5-1/2” (140 mm) from door face. 6” (152 mm) for CUSH.

n Head Frame flush or rabetted requires CUSH FLUSH PANEL ADAPTER, 4040XP-419.

n CUSH ARM requires SHOE SUPPORT, 4040XP-30 for fifth screw anchorage for narrow frames.

n *Delayed Action Incorporates standard 4041 cylinder, without XP cylinder.

Delays closing from maximum opening to ; 115˚ with 180˚ template, 95˚ with 110˚ template, 85˚ with 100˚ template, 75˚ with 90˚ template. Delay time adjustable up to approximately 1 minute.

4040XP SERIES

M

OU

NT

IN

G

DE

TA

IL

S4040XP SERIES EDA MOUNT

4040XP SERIES CUSH MOUNT

FAX 800-248-1460

www.allegion.com/us 2/14

CYLINDERS

CYLINDER, 4040XP-3071

Heavy duty, non-handed cast iron cylinder assembly.

CYLINDER, 4041-3071 DEL

Cylinder used for delayed action options.

COVERS

COVER, 4040XP-72

Standard, non-handed plastic cover.

METAL COVER, 4040XP-72MC

Optional, handed cover. Required for plated finishes and custom powder coat finishes.

ARMS

REGULAR ARM, 4040XP-3077

Non-handed arm mounts pull side or top jamb with shallow reveal.

P4041 closer includes PA SHOE, 4040XP-62PA required for parallel arm mounting.

PA SHOE, 4040XP-62PA

Required for parallel arm mounting.

LONG ARM, 4040XP-3077L

Optional non-handed arm includes LONG ROD AND SHOE, 4040XP-79LR for top jamb mount.

EXTRA LONG ARM, 4040XP-3077ELR

Optional non-handed arm includes EXTRA LONG ROD AND SHOE, 4040XP-79ELR for top jamb mount with deep reveal.

HOLD-OPEN ARM, 4040XP-3049

Optional, non-handed arm mounts pull side or top jamb with shallow reveal, hold-open adjustable shoe. 4040XP closer includes 4040XP-62PA shoe required for parallel arm mounting.

LONG HOLD-OPEN ARM, 4040XP-3049L

Optional non-handed arm includes LONG HEAD AND TUBE, 4040XP-3048L for top jamb mount.

EXTRA DUTY ARM, 4040XP-3077EDA

Non-handed parallel arm features forged, solid steel main and forearm for potentially abusive installations.

HOLD-OPEN EXTRA DUTY ARM, 4040XP-3049EDA

Handed parallel arm features forged, solid steel main and forearm for potentially abusive installations. Hold-open function is adjusted at the shoe.

EXTRA DUTY ARM WITH 62G, 4040XP-3077EDA/62G

Non-handed parallel arm features forged, solid steel main and forearm for potentially abusive installations. 62G shoe provides additional blade stop clearance.

HOLD-OPEN EXTRA DUTY ARM WITH 62G, 4040XP-3049EDA/62G

Handed parallel arm features forged, solid steel main and forearm for potentially abusive installations. 62G shoe provides additional blade stop clearance. Hold-open function is adjusted at the shoe.

4040XP SERIES

AC

CE

SS

OR

IE

S

72MC72

79ELR

3048L 3049

4040XP-3071

79LR 62PA

3049EDA

3077EDA

3049EDA/62G

3077EDA/62G

4041-3071 DEL

42 43

FAX 800-248-1460

www.allegion.com/us 2/14

ARMS CONT.

CUSH-N-STOP® ARM, 4040XP-3077CNS

Optional, non-handed parallel arm features solid forged steel main arm and forearm with stop in soffit shoe.

HCUSH ARM, 4040XP-3049CNS

Provides hold-open function with templated stop/hold-open points.

Handle controls hold-open function.

SPRING CUSH ARM, 4040XP-3077SCNS

Optional, non-handed parallel arm for abusive applications features solid forged steel main arm and forearm with spring loaded stop in the soffit shoe.

SPRING HCUSH ARM, 4040XP-3049SCNS

Optional, non-handed parallel arm for abusive applications features solid forged steel main arm and forearm with spring loaded stop in the soffit shoe. Handle controls hold-open function.

INSTALLATION ACCESSORIES

PLATE, 4040XP-18

Required for hinge side mount where top rail is less than 3-3/4” (95 mm). Plate requires minimum 2” (51 mm) minimum top rail.

PLATE, 4040XP-18G

Locates top jamb mounted closer flush with top of head frame face in flush ceiling condition. Plate requires 1-3/4” (44 mm) minimum head frame.

PLATE, 4040XP-18TJ

Centers top jamb mounted closer vertically on head frame where face is less than 3-1/2” (89 mm). Plate requires 1-3/4” (44 mm) minimum head frame.

PLATE, 4040XP-18PA

Required for parallel arm mounting where top rail is less than 5-1/2” (140 mm), measured from the stop. Plate requires 2” (51 mm) minimum top rail.

4040XP SERIES

AC

CE

SS

OR

IE

S

18G 18TJ

18PA

3077CNS

3049CNS

3077SCNS

3049SCNS

FAX 800-248-1460

www.allegion.com/us 2/14

INSTALLATION ACCESSORIES CONT.

CUSH SHOE SUPPORT, 4040XP-30

Provides anchorage for fifth screw used with CUSH arms, where reveal is less than 3-1/16” (78 mm).

BLADE STOP SPACER, 4040XP-61

Required to lower parallel arm shoe to clear 1/2” (13 mm) blade stop.

PA FLUSH PANEL ADAPTER, 4040XP-419

Provides horizontal mounting surface for parallel arm shoe on single rabetted or flush frame.

AUXILIARY SHOE, 4040XP-62A

Requires a top rail of 7” (178 mm). Optional shoe replaces -62PA for parallel arm mounting of regular arm with overhead holder/stop.

4040XP SERIES

AC

CE

SS

OR

IE

S 30

62A

44 45

FAX 800-248-1460

www.allegion.com/us 2/14

4040XP SERIES

OR

DE

RI

NG

IN

FO

RM

AT

IO

N size 3 size 4 size 5 size 6

*4040XP

*4040XP

EXTERIOR (and VESTIBULE) DOOR WIDTH

24" 610mm

30" 762mm

36" 914mm

42" 1067mm

INTERIOR DOOR WIDTH

48" 1219mm

24" 610mm

34" 864mm

38" 965mm

48" 1219mm

54" 1372mm

60" 1524mm size 2 size 3 size 4 size 5 size 6

REDUCED OPENING FORCE 4040XP SERIES CLOSERS

CAUTION ! Any manual door closer, including those certified by BHMA to conform to ANSI Standard A156.4, that is selected, installed and adjusted based on ADA or other reduced opening force requirements may not provide sufficient power to reliably close and latch a door.

Refer to POWER OPERATORS section for information on systems that meet reduced opening force requirements without effecting closing power.

Minimum Door Width

Minimum Door Width

Indicates recommended range of door width for closer size.

* Adjustable Size 1 thru 6.

TABLE OF SIZES

4040XP cylinders are adjustable from size 1 through size 6 and is shipped set to size 3.

Closing power of 4040XP Series closers may be adjusted 50%.

HOW-TO-ORDER

4040XP SERIES CLOSERS

1. SELECT FINISH

Standard Powder Coat __________

Aluminum, Dark Bronze, Statuary, Light Bronze, Black, Brass.

CLOSER OPTIONS

CYLINDER

Delayed Action (4041 DEL)

COVER

Metal (specify right or left hand) (MC)

FINISH

Custom Powder Coat (RAL) ___________

(handed metal cover required) Plated Finish, US ______________

(handed metal cover required) SRI primer (use with powder coat finishes only)

ARM

Regular (REG) Regular w/62PA (Rw/PA) Regular w/62A (R/62A) Long (LONG) Extra Long (XLONG) Hold-Open (H) Hold-Open w/62PA (Hw/PA) Long Hold-Open (HLONG) Extra Duty Arm (EDA) Extra Duty Arm with 62G (EDA/62G) Hold Open Extra Duty Arm (HEDA) (Handed) Hold Open Extra Duty Arm with 62(HEDA/62G)(Handed) Cush-N-Stop (CUSH) HCush-N-Stop (HCUSH) Spring Cush (SCUSH) Spring HCush (SHCUSH)

OPTIONAL SCREW PACKS

TB* w/Self-Reaming and Tapping (TBSRT) Wood & Machine Screw (WMS) TB*, Wood & Machine Screw (TBWMS) TORX Machine Screw (TORX) TB* & TORX Machine Screw (TBTRX)

* Specify door thickness if other than 1-3/4˝.

INSTALLATION ACCESSORIES

Plate, 4040XP-18 Plate, 4040XP-18TJ Plate, 4040XP-18G Plate, 4040XP-18PA CUSH Shoe Support, 4040XP-30 Blade Stop Spacer, 4040XP-61 Auxiliary Shoe, 4040XP-62A PA Flush Panel Adapter, 4040XP-419

SPECIAL TEMPLATE

ST- ________

DOOR WIDTH 36" 42" 48"

8.5* lbs. 4040XP 4040XP 4040XP

5.0* lbs. 4040XP 4040XP 4040XP

* Maximum opening force.

Closer will be shipped with:

- STANDARD CLIP-ON COVER

- SPECIFY ARM WHEN ORDERING

- SELF-REAMING and TAPPING SCREWS, unless options listed below are selected.

Toll Free Phone 1-800-647-7874 Toll Free Fax 1-800-255-7874

E-mail: ngpinfo@ngpinc.com www.ngpinc.com

National Guard Products, Inc.

PROTECTION, INSIDE OUT

Available in 36”, 48”, 84”, 96” and 108” lengths.

7/16"

7/16"

Self Adhesive Seals

5020B Brown

5020C Charcoal

5020W White

Available in 17’, 20’, 21’, 25’ and 300’ rolls.

1/4"

3/8"

2525B Brown 2525C Charcoal 2525W White 2525T Tan

1/2"

1/4"

5050B Brown 5050C Charcoal 5050W White 5050T Tan 5050CL Clear

HEAD &

LATCH SIDE

DOORJAMB

HINGE SIDE

DOORJAMB

5021B Brown

5021C Charcoal

5021W White

11/32"

7/16"

7/16"

Available in 17’, 20’, 21’, 25’ and 300’ rolls.

DOOR DOOR

LATCH SIDE HINGE SIDE

Neoprene Gasketing width thickness

361 18’, 21’, 50’ rolls 3/8” x 3/16” 362 18’, 50’ rolls 1/2” x 1/4” 363 18’, 50’ rolls 3/8” x 1/8”

Se lf

Ad he siv e

Se als

Kerf Application

SiliconeSilicone

10C S

10C S

ESS **Edge Sealing System on 20 min rated wood doors up to 4’0 x 8’0 sin-gle, 8’0 x 8’0 std. pair with 9800 or 9500 at meeting edge.

10C S

“FATT”

Fast Attach Two-Way Tape Fast attach two way tape provides an easy and effective alter-native to gasketing installation. A 1/2” wide 2-way tape is applied to the metal housing insuring a quick and easy instal-lation. Then for security, 3 tek-type self drilling screws are used to further secure each piece of material to the frame stop. A no problem installation with no holes to drill.

To order add suffix “FATT” to product number. See price list for products available with this feature.

FATT IS NOT CLASSIFIED FOR USE ON FIRE DOORS.

1/2"

5/16"

5060B Brown 5060CL Clear

Available in 7’, 8’, 9’, 17’, and 21’ rolls

10C S

HEAD &

LATCH SIDE

DOORJAMB

HINGE SIDE

DOORJAMB

(optional astragal application)

E-mail: ngpinfo@ngpinc.com www.ngpinc.com

National Guard Products, Inc.

PROTECTION, INSIDE OUT

1/ 4" vinyl

3/ 4"

1 3/4"

1/ 4"

35EV

35EVDKB

vinyl

1 3/4"

1/ 4"

3/ 4"

1/ 4"

35VA

35VB

35VDKB

1/ 2" vinyl

7/ 8"

1 3/4"

36EV

36EVDKB

1/ 2" vinyl

1 3/4"

36VA

36VDKB

1/ 2" vinyl

1 3/16"

312V

312VDKB

vinyl

1 3/16" 3/ 4"

1/ 4"

1/ 4"

313VA

313VDKB

vinyl

1/ 2"

1"

318V

318VDKB

1/ 2" vinyl

7/ 8"

1 3/4"

319EV

319EVDKB

1/ 2" vinyl

1 3/4"

319V

319VA

319VB

319VDKB

Do or

Sh oe s

A - clear B - gold DKB - dark bronze vinyl is gray vinyl on DKB is brown

This page OK for use on

‘S’ label doors. 10C

Finned Vinyl Door Shoes

1/4"

1/4"

1/8"

3/8"

1 1/8"

1 3/4"

Designed for use on standard 3/4" undercut door used with NGP 896 ADA compliant threshold as shown

95WH

95WHDKB

Nylon Brush Door Shoe

NEW!

E-mail: ngpinfo@ngpinc.com www.ngpinc.com

National Guard Products, Inc.

PROTECTION, INSIDE OUT

Sw ee ps

7/ 8" vinyl

7/ 8"

96V

96VA

96VB

96VDKB

#6 x 3/4” stainless steel sheet metal screws furnished.

1" vinyl

7/ 8"

97V

97VA

97VB

97VDKB*

3/ 4" vinyl

7/ 8"

98V

98VA

98VB

98VDKB

1/ 2" vinyl

7/ 8"

100V

100VA

100VB

100VDKB**

1/ 2" vinyl

1/

2"

101VA

101VB

101VDKB

3/ 4" vinyl

1/

102VA

102VB

102VDKB*

5/16"neoprene

/1

6"

23/32"117N

117NDKB

5/

8" neoprene

7/ 8"

197NA

197NB

197NDKB

1" neoprene

7/ 8"

198NA

198NB

198NDKB

1" neoprene

1/

4"

199NA

199NB

199NDKB

3/ 8"

1/

4" polyurethane

200UA

200UB

200UDKB

1/ 2"neoprene

1/

201NA

201NB

201NDKB

5/ 8" neoprene

1"

3/8"

202NA

202NB

202NDKB

2" neoprene

1"

3/8"

203NA

203NB

203NDKB

3/ 4"

1/

4" vinyl

1025VA

1025VB

1025VDKB*

3/ 8"neoprene

1/

4" neoprene

200NA

200NB

200NDKB

silicone

200SA

200SB

200SDKB

7/ 8" polyurethane

7/ 8"

198UA

198UB

198UDKB

All products this page:

OK for use on ‘S’ label doors.

10C

1" black rubber covered fabric

1/

2014A 2014B

2014DKB

vinyl is gray. Exceptions:

*vinyl is black, ** vinyl is brown neoprene, polyurethane are black silicone is gray

Nothing is tougher

At Schlage we know that every product you specify has to stand up to constant use and abuse. Your building’s locking systems face an additional challenge – keeping people and other assets safe while delivering constant, reliable performance. Schlage L Series Extra Heavy Duty Mortise Locks are built to withstand the rigors of daily use without fail.

L Series

We don’t compromise on security

The safety and security of your clients’ buildings is something we take very seriously. That’s why every Schlage lock and deadbolt undergoes intensive testing to determine its ANSI grade level:

• Cycle tests • Resistance tests

• Door impact tests • Warped door tests

• Bolt strength tests

We pay attention to these details so you can focus on creating a functional and aesthetically pleasing environment for your clients. In fact, every one of our L Series locks meets ANSI Grade 1 standards for safety.

Schlage • L Series • 7

Vandlgard®

The L Series Vandlgard is ideal for areas subject to abuse or anywhere vandalism is likely to be present. Vandlgard prevents damage to internal lock components caused by excessive force from kicking, hitting or standing on the lever to gain access.

It’s easy to retrofit standard L Series locks with Vandlgard using the Vandlgard Retrofit Kit and an instructional DVD that shows installation on existing hardware.

8 • Schlage • L Series

2.875"

4.625"

1.969"

To learn more about suiting of Schlage and Von Duprin products with our decorative or standard levers contact your security consultant or visit allegion.com/us.

Accent

05 06

Latitude

St Annes

Asti

2.563"

4.75"

4.313"

2"

3.125"

2.5"

.5"

4.625"

2.875"

3.75"

2.281"

4.125"

2"

3.125"

4"

2"

2.625"

Finish options

Color Bright brass

Satin brass

Antique brass

Satin bronze

Oil rubbed Bronze

Satin nickel

Bright chrome

Satin chrome

Bright stainless steel

Satin stainless steel

Aged bronze

ANSI/BHMA

number

605 606 609 612 613 619 625 626/626AM 629 630/630AM 643

US number US3 US4 US5 US10 US10B US15 US26 US26D US32 US32D US11

AM = Antimicrobial.

See pricebook for additional trim and finish availability. 33A, 95 & 99 devices not available in 619 & 630 finishes.

Schlage • L Series • 13

Escutcheons and roses Choose from three types of escutcheon and two rose sizes to add tough, durable performance to your lockset.

Escutcheons

7/16" 11mm

8" 203mm

7/16" 11mm

8" 203mm

7/16" 11mm

8" 203mm

Roses

L Full face Specify by adding ‘L’ after lever design.

Material: Cold-forged brass, bronze or stainless steel

Finishes: 605, 606, 609, 612, 613, 619, 625, 626, 629, 630, 643e

Size: 8" x 1 3⁄4" x 7⁄16" (203 mm x 44 mm x 11 mm)

A Wrought rose 2 1⁄8" (54 mm) diameter Available for use on L Series knob and lever designs. Specify by adding ‘A’ after lever design

Finishes: 605, 606, 609, 612, 613, 619, 625, 626, 629, 630, 643e

B Wrought rose 2 9⁄16" (65 mm) diameter Available for use on L Series knob and lever designs. Specify by adding ‘B’ after lever design.

Finishes: 605, 606, 609, 612, 613, 619, 625, 626, 629, 630, 643e

C Wrought rose 2 5⁄8" (66 mm) diameter Available for use on L Series knob and lever designs. Specify by adding ‘C’ after lever design.

Finishes: 605, 606, 609, 619, 625, 626, 629, 630, 643e

L Concealed Specify by adding ‘C’ suffix to function and by adding ‘L’ after lever design.

Material: Cold-forged brass, bronze or stainless steel

Finishes: 605, 606, 609, 612, 613, 619, 625, 626, 629, 630, 643e

Size: 8" x 1 3⁄4" x 7⁄16" (203 mm x 44 mm x 11 mm)

N Escutcheon Specify by adding ‘N’ after lever design.

Material: Heavy wrought reinforced brass, bronze or stainless steel

Finishes: 605, 606, 609, 612, 613, 619, 625, 626, 629, 630, 643e

Size: 8" x 2 9⁄16" x 7⁄16" (203 mm x 65 mm x 11 mm)

14 • Schlage • L Series

Thumbturns Choose from three variations of thumbturn locks that help you meet the demands of specialized commercial projects.

Tactile warning (knurling)

Schlage L Series commercial levers feature knurling only on the outside lever unless otherwise specified.

This feature is available on the following lever models:

01, 02, 03, 05, 06, 07, 12, 17, 18, 41, 42 and 93. 03 Lever shown

Products featuring a knurled surface will be indicated by adding the prefix “8” to the lever number. For example, L9050P 803A/03A.

Hotel occupancy indicator 09-611 For lock function L9486P, this unit can be used with A or B roses.

Requires a 1 3⁄8" (35 mm) cylinder for 1 3⁄4" (44 mm) doors. Specify finish when ordering separately.

Optional EZ turn L583-363 Available for rose and escutcheon trim. Disability turn (ADA) option to standard thumbturn. Can be used with thumbturn-function L Series lock except L9463 and L463. Specify lock per L583-363 when ordering.

Coin turn For lock function L9044 and L9444 with rose trim. Specify 09-509 and finish per L283-124 when ordering.

Schlage • L Series • 15

Lock functions

Lock components Deadbolt

Cylinder

Outside knob or lever

Inside knob or lever

Thumbturn

Thumbturn cylinder

Coin turn

Solid spindle

Two-piece spindle

Emergency turn piece

Occupancy indicator

Stopworks functions by turn-piece

Auxiliary guarded latch

Latchbolt with anti-friction tongue

Symbol key

Product identification guide

Cylinder suffix

P = 6-pin full-face mortise cylinder with Schlage logo*

L = less full-face cylinder

C = concealed mortise cylinder

W = less concealed cylinder

R = full-size interchangeable core with Schlage logo

J = less full-size interchangeable core

F = full-size interchangeable core less Schlage logo

T = full-size construction core

BD = SFIC less core

BDC = disposable SFIC

GD = Everest patented SFIC

HD = construction SFIC

SFIC = Small Format (Best® style) Interchangeable Core To order less Schlage logo, specify lock “with K510-612 faceplate.”

LV = Vandlgard® function allows exterior lever to rotate freely down while remaining securely locked.

L/LV 9 4 5 3 P

Lock series

L = standard

LV = vandlgard

0 = dummy trim without lock case

9 = functions with lock case

0 = no deadbolt

1 = dummy trim

4 = with deadbolt

Function

16 • Schlage • L Series

* In a double-door application where the dummy will be used as the strike order 10-091 Armored Front Strike separately.

Schlage ANSI

L9010 FO1

Passage latch

Latchbolt retracted by knob/lever from either side at all times. Inside lever is always free for immediate egress.

Schlage ANSI

L9444

LV9444

Privacy with deadbolt and coin turn outside

Latchbolt retracted by knob/lever from either side. Deadbolt thrown or retracted by inside thumbturn or outside coin turn. Throwing deadbolt locks outside knob/lever. Rotating inside knob/lever simultaneously retracts deadbolt and latchbolt, and unlocks outside knob/lever. Rotating outside coin turn retracts deadbolt and unlocks outside knob/lever.

Specify per L283-056 for Torx screws.

Available with rose trim only. Inside lever is always free for immediate egress. (Previously

XL11-868)

L0170

Half dummy trim

Knob/lever on one side fixed by mounting bar.

L0172

Full dummy trim

Knob/lever on both sides fixed by mounting bar.

L9175

Half dummy trim with lock case

Fixed knob/lever on one side inoperable.

Includes lock case and armored front. Options same as L9176 below.

L9176

Full dummy trim with lock case*

Fixed knob/lever on both sides. Includes lock case and blank armor front. May be ordered with optional XL11-743 armored front with cutout to receive deadbolt.

L9040 F22

LV9040

Bath/bedroom privacy lock

Latchbolt retracted by knob/lever from either side unless outside is locked by inside thumbturn. Turning inside knob/lever or closing door unlocks outside knob/lever. To unlock from outside remove emergency button, insert emergency thumbturn (furnished) in access hole and rotate. Inside lever is always free for immediate egress.

L9044

LV9044

Privacy with coin turn outside

Latchbolt retracted by knob/lever from either side unless outside is locked by inside thumbturn or outside coin turn. Operating inside knob/lever, closing door, rotating inside thumbturn or rotating outside cointurn unlocks outside knob/lever. Specify per L283-056 for Torx® screws. Available with rose trim only. (Previously XL11-868)

L9440

LV9440 F19

Privacy with deadbolt

Latchbolt retracted by knob/lever from either side. Deadbolt thrown or retracted by inside thumbturn. Throwing deadbolt locks outside knob/lever. Rotating inside knob/lever simultaneously retracts deadbolt and latchbolt, and unlocks outside knob/lever. To unlock from outside remove emergency button, insert emergency thumbturn in access hole and rotate. Inside liner is always free for immediate egress. (Previously XL11-761.)

Schlage • L Series • 17

Schlage ANSI

L9050 F04

LV9050

Office and inner entry lock

Latchbolt retracted by knob/lever from either side unless outside is made inoperative by key outside or by turning inside thumbturn. When outside is locked, latchbolt is retracted by key outside or by knob/lever inside. Outside knob/lever remains locked until thumbturn is returned to vertical or unlocked by key. Auxiliary latch deadlocks latchbolt when door is closed. Inside liner is always free for immediate egress.

L9080EU

LV9080EU

Electrically unlocked (fail secure)

Outside knob/lever unlocked by 24V AC or DC. Latchbolt retracted by key outside or knob/lever inside. Auxiliary latch deadlocks latchbolt when door is closed. Inside lever is always free for immediate egress.

L9056

LV9056

L9050 with automatic unlocking

Latchbolt retracted by knob/lever from either side unless outside is made inoperative by key outside or by rotating inside thumbturn. Outside knob/lever unlocked by key outside, thumbturn or closing door. Rotating inside knob/ lever simultaneously retracts latchbolt and unlocks outside knob/lever. Auxiliary latch deadlocks latchbolt when door is closed. Inside lever is always free for immediate egress.

L9080EL-RX / LV9080EL-RX

L9080EU-RX / LV9080EU-RX

Request to exit (RX) electrified lock

Same as L9080EL and L9080EU functions. In addition, a micro-switch positioned inside the lock case monitors the retractor crank, and is actuated when rotation of the inside or outside knob/levers rotates the retractor hub.

The switch signals the use of that opening to security systems, allowing a non-disruptive means of immediate egress. Specify per L283-263 with L functions, specify L283-239 with LV functions. Inside lever is always free for immediate egress.

L9070 F05

LV9070

Classroom lock

Latchbolt retracted by knob/lever from either side unless outside is locked by key. Unlocked from outside by key.

Inside knob/lever always free for immediate exit. Auxiliary latch deadlocks latchbolt when door is closed. Inside lever is always free for immediate egress.

L9076 F06

LV9076

Classroom holdback lock

Latchbolt retracted by knob/lever from either side unless outside is locked by key. When locked, latchbolt retracted by key outside or knob/lever inside. Auxiliary latch deadlocks latchbolt when door is closed. Depress inside knob/lever and turn key 360° for holdback feature. Inside lever is always free for immediate egress.

L9080 F07

LV9080

Storeroom lock

Latchbolt retracted by key outside or by knob/lever inside.

Outside knob/lever is always inoperative. Auxiliary latch deadlocks latchbolt when door is closed. Inside lever is always free for immediate egress.

Schlage ANSI

L9080EL

LV9080EL

Electrically locked (fail safe)

Outside knob/lever continuously locked by 24V AC or DC. Latchbolt retracted by key outside or by knob/lever inside. Switch or power failure allows outside knob/ lever to retract latchbolt. Auxiliary latch deadlocks latchbolt when door is closed. Inside knob/lever always free for immediate exit. Inside lever is always free for immediate egress.

18 • Schlage • L Series

In a double-door application where the dummy will be used as the strike order 10-091 Armored front strike separately.

*Caution: Double cylinder locks on residences and any door in any structure which is used for egress are a life safety hazard in times of emergency and their use is not recommended. Installation should be in accordance with existing codes only.

Schlage ANSI

L9060 F09

LV9060

Apartment entrance lock

Latchbolt retracted by knob/lever from either side unless outside is locked by key from inside. When locked, latchbolt retracted by key outside or knob/lever inside. Auxiliary latch deadlocks latchbolt when door is closed. Inside lever is always free for immediate egress.

Schlage ANSI

L9457

LV9457

Classroom security lock with deadbolt

Latchbolt retracted by knob/lever from either side.

Deadbolt thrown or retracted by key from either side.

Throwing deadbolt locks outside knob/lever. Turning inside knob/lever simultaneously retracts deadbolt and latchbolt, and unlocks outside knob/lever. Inside lever is always free for immediate egress.

L9071

LV9071

Classroom security lock

Latchbolt retracted by knob/lever from either side unless outside is locked by key from either side. When locked, latchbolt retracted by key outside or knob/lever inside.

Auxiliary latch deadlocks latchbolt when door is locked.

Inside lever is always free for immediate egress.

L9466 F14

Store/utility room lock with deadbolt*

Latchbolt retracted by knob/lever from either side.

Deadbolt thrown or retracted by key from either side.

L9077

LV9077

Classroom security holdback lock

Latchbolt retracted by knob/lever from either side unless outside is locked by key from either side. When locked, latchbolt retracted by key outside or knob/lever inside. Auxiliary latch deadlocks latchbolt when door is locked. Depress inside knob/ lever and turn key 360° for holdback feature. Inside lever is always free for immediate egress.

L9482 x XL11-943 LV9482 x XL11-943

Institution lock with deadbolt*

Latchbolt retracted by key from either side. Knob/lever on both sides always inoperative. Deadbolt thrown or retracted by key either side. Auxiliary latch deadlocks latchbolt when door is closed. Specify per XL11-543.

L9082 F30

LV9082

Institution lock

Latchbolt retracted by key from either side. Knob/lever on both sides always inoperative. Auxiliary latch deadlocks latchbolt when door is closed.

L9082EL

L9082EU

L9082 electrically locked or electrically un-locked both sides*

EL: Outside and inside knob or lever continually locked electrically. Latchbolt retracted by key either side. Switch or power failure allows outside and inside knob/lever to retract latchbolt. Auxiliary latch deadlocks latchbolt when door is closed. EU: Outside and inside knob/lever unlocked electrically. Latchbolt retracted by key either side. Switch or power failure keeps inside and outside knob/lever locked.

Auxiliary latch deadlocks latchbolt when door is closed.

(Previously XL11-452)

20 • Schlage • L Series

Door preparation for L9000 Series

8"

203 mm

1-1/4"

32 mm

2-3/4"

70 mm

6-1/4 "

159 mm

4-1/2"

114 mm

1"

25 mm

3-7/8"

98 mm

5-9/16"

141 mm

1-1/4"

32 mm

2-3/4"

70 mm

3-3/4"

95 mm

4-1/2"

114 mm

1"

25 mm

Door preparation for L400 Series

Certifications

ANSI:

L9000: ANSI A156.13 Series 1000, Grade 1

Operational and Security, UL Listed for 3-hour fire door (except L9076 and L9007). With interchangeable core cylinders: Grade 2 Security.

With concealed shell cylinder: A156.13 Grade 1

Operational and Security. ANSI/ASTM F476-76

Grade 40, UL Listed. L400: ANSI A156.5 Grade 1.

California State Reference Code:

(Formerly Title 19, California State Fire

Marshal Standard) All levers with returns comply; levers return to within 1⁄2" of door face.

UL / cUL:

All locks listed for A label single doors, 4' by 10'.

Letter F and UL symbol on latch front indicate listing. Electrified functions are UL19X Listed for single-point locking applications. UL437 Listed locking cylinder optional: specify Primus 20-500

Series cylinder.

Specifications Handing:

L9000 Series lock bodies are field-reversible without disassembly. L400 Series locks are non-handed.

Door thickness:

13⁄4" (44 mm) standard. 13⁄8" (35 mm) to 21⁄2" (64 mm) optional.

Over 21⁄2" (64 mm) door ranges vary by function. No escutcheon available for 13⁄4" (44 mm) doors standard. 2" to 23⁄8" (51 mm to

60 mm) optional. Specify door thickness if other than 13⁄4".

Backset:

23⁄4" (70 mm) only.

Armored…