A-11_Attachment_3_GovtFurnishedProperty.pdf

Silver Jack CG Water System Pressure Tank Installation

Government Furnished Property List

Quantity Item Condition & Current Estimated Value

Notes

3 Pentair Wellmate UT 80 fiberglass retention tanks

Used

Unit Value: $242

(New price was $364)

Stored at a government facility away from the project site. The government will deliver the tanks to the treatment building at project site before the Notice to Proceed is issued. If the Contractor wishes to delay delivery, they should contact the Contracting Officer.

See attached product data sheet. For typical dimensions. Piping and appurtenances required for installation are not furnished by the government.

1 Chem-Tech Series 100 diaphragm chemical injection pump (serial # 2007) and 30 gallon HDPE solution tank

Used

$200

Currently plumbed in treatment building at the project site.

See the Drawings for details on how the chemical injection pump is to be re-plumbed. Existing piping, tubing, and appurtenances in the treatment building may be reused. Additional piping, tubing and appurtenances required for installation are not furnished by the government.

FILTRATION & PROCESS WELLMATE UT SERIES RETENTION TANKS

Inlet/Outlet PVC Pipe Connections – allow straight through T connection on bottom of tank for ease of piping Blowdown Valve – for easy removal of sludge from bottom of tank Hydropneumatic Convertible – optional air volume control assembly and micronizer allow for quick and easy tank conversion Standard 1” ID / 1.25” Quick Connect Socket One piece, seamless inner shell molded of premium, high-density polyethylene which provides impact and corrosion resistance

Miles of fiberglass filament covered with epoxy resin produce superior strength in a light-weight design Additional drain port Curved bottom dome design maximizes contact time and facilitates sludge removal 1.25” socket inlet/outlet PVC pipe connections offer maximum application flexibility

FEATURES/BENEFITS

Contact Tank for Water Treatment Hydropneumatic

APPLICATIONS

WELLMATE® UT SERIES

UNIVERSAL RETENTION TANKS

There’s no better tank choice for water treatment than the Pentair® Wellmate® UT Series. Composite construction makes the entire line impervious to the chemicals found in aggressive water.

FILTRATION & PROCESS

5730 NORTH GLEN PARK ROAD, MILWAUKEE, WI 53209

262.238.4400, CUSTOMER CARE: 800.279.9404, WWW.PENTAIRAQUA.COM

All Pentair trademarks and logos are owned by Pentair, Inc. All other brand or product names are trademarks or registered marks of their respective owners.

Because we are continuously improving our products and services, Pentair reserves the right to change specifications without prior notice.

Pentair is an equal opportunity employer.

4003265 REV A MR14 © 2014 Pentair Residential Filtration, LLC. All Rights Reserved.

ORDERING INFORMATION

ACCESSORIES

FOR HYDROPNEUMATIC CONVERSION

PART # DESCRIPTION

CH3929-5 Micronizer

CH19426 Vacuum Breaker 1/4” NPT

CH20287 WM AVC ASSY QC HP7/HP110

CH20288 WM AVC ASSY QC HP8SQ/HP150SQ

CH20289 WM AVC ASSY QC HP9/HP150

CH20290 WM AVC ASSY QC HP18/HP300

CH20291 WM AVC ASSY QC HP26/HP450

NOTE: Flexible connectors must be installed between hard piping and tank openings. These pressure vessels are rated for an internal negative pressure of 5” HG (17 Pa) vacuum below atmospheric.If negative pressure could ever exceed 5” Hg (17 Pa), an adequate vacuum breaker must also be properly installed. Failure to install flex connection properly, or improper installation of a vacuum breaker when required, may void the warranty.

Tested and Certified by the Water Quality Association (WQA) to NSF/ANSI-61, Section 8 and NSF/ANSI 372.

QUICK CONNECT

MODEL

CAPACITY

GAL / LITER

MAXIMUM

OPERATING

PRESSURE

PSI / kPa / BAR

DIAMETER*

INCH / CM

OVERALL

HEIGHT*

INCH / CM

HEIGHT*

INLET/OUTLET

TO FLOOR

INCH / CM

SYSTEM CONNECTION ASSEMBLY

WEIGHT*

LB / KGTOP BOTTOM

UT-30 / WM-UT-110 / CE 30 / 114 75 / 500 / 5.0 16 / 41 44.5 / 113 1.5 / 3.8 1 1/4" Socket Q.C. 1 1/4" Socket 25 / 11.3

UT-40 / WM-UT-150 / CE 40 / 151 75 / 500 / 5.0 16 / 41 57.25 / 145 1.5 / 3.8 1 1/4" Socket Q.C. 1 1/4" Socket 28 / 12.7

UT-40SQ / WM-UT-150-SQ / CE 40 / 151 75 / 500 / 5.0 21 / 53 36 / 91 2 / 5.1 1 1/4" Socket Q.C. 1 1/4" Socket 33 / 15.0

UT-80 / WM-UT-300 / CE 80 / 303 75 / 500 / 5.0 21 / 53 62.75 / 159 2 / 5.1 1 1/4" Socket Q.C. 1 1/4" Socket 43 / 19.5

UT-120 / WM-UT-450 / CE 120 / 454 75 / 500 / 5.0 24 / 61 72.25 / 186 2 / 5.1 1 1/4" Socket Q.C. 1 1/4" Socket 63 / 28.6

NOTE: Maximum external operating temperature 120°F (49°C). Maximum internal operating temperature 100°F (38°C).

Minimum operating temperature 40°F (4°C).

*Diameter, height and weight may vary slightly without notice.