Amend_0001_S-17-0033.pdf

NSN 7540-01-152-8070 Automated STANDARD FORM 30 (REV 10-83)

FAR (48 CFR) 52.243

1. CONTRACT ID CODE PAGE OF PAGES

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1 2

2. AMENDMENT/MODIFICATION NO. 3. EFFECTIVE DATE 4. REQUISITION/PURCHASE REQ. NO. 5. PROJECT NO. (If applicable)

Amendment 0001 7/6/17

6. ISSUED BY CODE 7. ADMINISTERED BY (If other than Item 6) CODE

USDA FS Apache-Sitgreaves National Forests SAME

Acquisition Management

30 S. Chiricahua Drive PO Box 640

Springerville, AZ 85938 ,

8. NAME AND ADDRESS OF CONTRACTOR (No., street, county, State and ZIP Code) () 9A. AMENDMENT OF SOLICITATION NO.

X AG-8173-S-17-0033

9B. DATE (SEE ITEM 11)

X 6/22/17

10A. MODIFICATION OF CONTRACT/ORDER

NO.

10B. DATED (SEE ITEM 13)

CODE FACILITY CODE

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers is extended, is not ex-tended.

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:

(a) By completing Items 8 and 15, and returning copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted; or (c)

By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE

PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT

IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACT/ORDERS,

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

() A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MDE IN THE CON-

TRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying offices, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section heading, including solicitation/contract subject matter where feasible.)

AG-8173-S-17-0035

.The purpose of Amendment 0001:

. I. Extend the Closing Date for Offers to August 31, 2017, 4:00 P.M. (MST).

. II. Attach attendance sheet for Site Visit.

(Continued on following page)

Except as provided herein, all terms and conditions of this document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print) 16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

, WARREN ABBOTT, Contracting Officer 15B. CONTRACTOR/OFFEROR 15C. DATE SIGNED 16B. UNITED STATES OF AMERICA 16C DATE SIGNED

BY 7/06/17

(Signature of person authorized to sign) (Signature of Contracting Officer)

In lieu of STANDARD FORM 30 BACK

AG-8173-S-17-0033

Replace Big Lake Water Tank Amendment 0001

III. USFS has under contract professional geotechnical investigation and lead-based paint testing services that will be made available to all interested parties. The geotechnical engineering report will include a description of the proposed project, discussion of field and laboratory testing programs, discussion of the subsurface conditions, and design recommendations as required for new potable water tanks at the investigation location. The testing agency will drill and multiple locations at the existing tank around the pad. The lead-based paint testing report will show the results of the tests and recommendations. Representative paint samples will be taken from exterior and interior locations of the tank to bare metal.

On Sheet 2 of 4, Exhibit 3, shows the proposed tie-in locations to the existing drain and supply line. The location and configuration of the new lines, supply valves, and drain valves may vary based on the Vendor’s proposal since tank outlet/inlet locations may be different, but the tie-in locations will remain as noted. The new 6-inch and 8-inch water lines were only an attempt to give a quantitative measurement for the line items.

IV. All other terms and conditions remain the same.