863_drawings.pdf

MP/Station Units

TONS

Grading Spec.

Feature Lengt h in Feet

DESCRIPTION OF WORK 863.1

FDR 863

79+20 B.O.P. Sta 79+20

BEGIN RECONDITIONING - SPEC. 303(01) TO E.O.P.

Rebuild Ditches and Clean All Culverts and cattleguards as needed Begin clearing both sides of road to 205+00 Clearing shall remove all small trees and brush up to 6 inches in diameter. Larger remaining trees will have all overhanging branches trimmed flush to a height of 15 feet above finished road bed elevation.

Maximun stump height for larger trees shall be 8 inches and small trees and brush 2 inches.However, remove stumps of any tree cleared if the is within the road travelway,shoulder, turnouts.curve widening, ditch slope, or is in a location where a vehicle tire could impact the stump.

Clearing shall be a minimun of 6 feet from each shoulder or top of cut slope or toe of fill whichever is the further distance.All costs for this work are included in item 303(18)

4,200 J BEGIN AGGR Grading J 4" COMPACTED DEPTH TO EOP

124+80 CMP Install 18"x36 ft culvert

130+00 680 pit run Begin pit run taper to 20 " @ sta 131+50

131+50 Begin 20" depth pit run

132+50 CMP Install 24"x38ft Culvert

133+00 Begin pit run taper down to sta 134+50

205+00 End of Project

OPTIONAL BID ITEM

RECONDITIONING- SPEC 303(01) 0 to 2.5 Mi as awarded

Begin clearing clearing both sides of road to be marked by Engineer Clearing shall remove all small trees and brush up to 6 inches in diameter. Larger remaining trees will have all overhanging branches trimmed flush to a height of 15 feet above finished road bed elevation.

Maximun stump height for larger trees shall be 8 inches and small trees and brush 2 inches.However, remove stumps of any tree cleared if the is within the road travelway,shoulder, turnouts.curve widening, ditch slope, or is in a location where a vehicle tire could impact the stump.

Clearing shall be a minimun of 6 feet from each shoulder or top of cut slope or toe of fill whichever is the further distance.All costs for this work are included in item 303(18) (Note - optional work will be awarded before base contract is complete.)

0 to 4550 J Aggr Grading J 4" compacted depth stations to be marked by Engineer

DESCRIPTION OF WORK Sand creek surfacing rock replacment Page 11 of 11

MP/Station Units

TONS

Grading Spec.

Feature Lengt h in Feet

DESCRIPTION OF WORK 863.1

DESCRIPTION OF WORK Sand creek surfacing rock replacment Page 11 of 11