AG0112S170013Amd1.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

1. CONTRACT ID CODE PAGE OF PAGES

1 4

2. AMENDMENT/MODIFICATION NO. 3. EFFECTIVE DATE 4. REQUISITION/PURCHASE REQ. NO. 5. PROJECT NO. (If applicable)

1 July 19, 2017

6. ISSUED BY CODE 7. ADMINISTERED BY (If other than Item 6) CODE

Alaska Region 123 Scow Bay Loop Road PO Box 309 Petersburg, AK 99833

Same as block 6

8. NAME AND ADDRESS OF CONTRACTOR (No., street, county, State, and ZIP Code) (X) 9A. AMENDMENT OF SOLICITATION NO.

AG-0112-S-17-0013 SEADC Door Replacement

9B. DATED (SEE ITEM 11)

06/20/2017

10A. MODIFICATION OF CONTRACT/ORDER NO.

10B. DATED (SEE ITEM 13)

CODE FACILITY CODE

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in item 14. The hour and date specified for receipt of Offers is extended, is not extended.

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS,

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

(X) A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN

THE CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return 1 copy to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.

The response date is extended to 23July2017.

In response to a question the government provides the attached additional hardware specifications. This hardware and other contract lines are subject to Federal Acquisition (FAR) clause 52.211-6 Brand Name or Equal (Aug 1999), which is incorporates by reference by this amendment.

Additionally, quoters are reminded that this procurement is subject to FAR clause 52.225-9 Buy American - Construction Materials (MAY 2014).

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print) 16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

Kim Toland, Supervisory Contract Specialist Officer

15B. CONTRACTOR/OFFEROR 15C. DATE SIGNED 16B. UNITED STATES OF AMERICA 16C. DATE SIGNED

July 19, 2017 (Signature of person authorized to sign) (Signature of Contracting Officer)

NSN 7540-01-152-8070

Previous edition unusable

30-105 STANDARD FORM 30 (REV. 10-83)

Prescribed by GSA

FAR (48 CFR) 53.243

Contractor will purchase and install new hardware based on Section 3.2 A of the SEADC Door Replacement Specifications and Hardware Groups 1, 2 and 3 as specified below. The information in Sheet 5 and 6 of the SEADC Door Replacement Plans pertains to the existing SEADC doors and is for information purposes. Newly installed hardware should be installed to the manufacturer’s specification. The contractor must adhere to Section 3.2 B1 of the SEADC Door Replacement Specification. The door schedule below pertains to newly installed doors.

Door Schedule

DOOR NO. DOOR

TYPE SIZE

DOOR FRAME DETAILS FIRE

RATING

HARDWARE

GROUP

GLAZING

TYPE MAT FIN MAT FIN HEAD JAMB

101A A 1 PR 3' X 7' FRP PUF FRP PUF

Note A Note A

N/R 1 TYPE 1

101B A 1 PR 3' X 7' FRP PUF FRP PUF N/R 1 TYPE 1

107 A 3' X 7' FRP PUF FRP PUF N/R 3 TYPE 1

119 A 3' X 7' FRP PUF FRP PUF N/R 3 TYPE 1

120 A 3' X 7' FRP PUF FRP PUF N/R 3 TYPE 1

11 A 3' X 7' FRP PUF FRP PUF N/R 3 TYPE 1

10B A 3' X 7' FRP PUF FRP PUF N/R 3 TYPE 1

10A A 1 PR 3' X 7' FRP PUF FRP PUF N/R 2 TYPE 1

FRP: FIBER REINFORCED PLASTIC

PUF: POLYURETHANE FINISH

Note A: Install Head and Jamb based on manufacturer specifications.

Note B: Glazing 1 is similar to that shown in Sheet 6 of 6 in the SEADC Door Replacement Drawings.

Hardware Group 1 (Main Entrance Double) Qty Unit Item Manufacturer Model

6 EA Hinge Ives (IVE) 5BB1 2 EA Panic Hardware Von Duprin Series 98/99 4 EA Rim Cylinder Schlage (SCH) 20-057 1 EA Keying Schlage (SCH) Everest 29 System 2 EA Closers LCN 4110 Series 6 EA Silencers Ives (IVE) SR64 2 EA Door Pull Ives (IVE) 8103HD - 12" c/c 2 EA Kickplates Ives (IVE) 8400 - 10" Height 2 EA Overhead Stops Glynn-Johnson (GLY) 100 Series 1 EA Threshold National Guard (NGP) 426 - 72" Length 2 EA Door Sweep National Guard (NGP) 600A - 36" Length 1 EA Automatic Entry System Stanley Magic Force HCP - Note 2 1 EA Push Plate Stanley Note 1

Note 1: A. Push Plates: Provide 6 inch circular push plates with UL recognized SPDT switch. Face plates and mounting studs shall be stainless steel. Face plates shall be engraved with the international symbol for accessibility and “Push To Open”. Push plates shall be wall mounted in single or double gang electrical boxes and hardwired to door operator controls.

Note 2: Automatic entry system shall be installed on the left facing door on the ingress side. Push plates shall be installed on the exterior wall adjacent to the exterior doors as specified by the CO. Each set of exterior entry doors shall have an independently operated opening system and push plate.

Hardware Group 2 (Rear Exterior Double) Qty Unit Item Manufacturer Model 6 EA Hinge Ives (IVE) 5BB1 2 EA Panic Hardware Von Duprin Series 98/99 4 EA Rim Cylinder Schlage (SCH) 20-057 1 EA Keying Schlage (SCH) Everest 29 System 2 EA Closers LCN 4110 Series 6 EA Silencers Ives (IVE) SR64 2 EA Door Pull Ives (IVE) 8103HD - 12" c/c 2 EA Kickplates Ives (IVE) 8400 - 10" Height

2 EA Overhead Stops Glynn-Johnson (GLY) 100 Series

1 EA Threshold National Guard (NGP) 426 - 72" Length

2 EA Door Sweep National Guard (NGP) 600A - 36" Length

Hardware Group 3 (Single) Qty Unit Item Manufacturer Model 3 EA Hinge Ives (IVE) 5BB1 1 EA Panic Hardware Von Duprin Series 98/99 2 EA Rim Cylinder Schlage (SCH) 20-057 1 EA Keying Schlage (SCH) Everest 29 System 1 EA Closers LCN 4110 Series 3 EA Silencers Ives (IVE) SR64 1 EA Door Pull Ives (IVE) 8103HD - 12" c/c 1 EA Kickplates Ives (IVE) 8400 - 10" Height

1 EA Overhead Stops Glynn-Johnson (GLY) 100 Series

1 EA Threshold National Guard (NGP) 426 - 36" Length

1 EA Door Sweep National Guard (NGP) 600A - 36" Length