Addendum 4_LI-BL-2023-001_D006332, D006645-47.pdf

PDF 4 MB Posted Sep 2, 2026

Attached to: Renovate Regional Administration Building - Exterior/Electrical Infrastructure Upgrades (Phase 2) at HQ Administration Building
Solicitation number: 2138584
Issued by: Suffolk County, New York

About this file

Written by GovTribe AI · Oct 26, 2026

This Addendum 4 document, issued by the New York State Office of Parks, Recreation and Historic Preservation (OPRHP), provides clarifications and modifications to bid documents for the Phase 2 Renovation of the Regional Administration Building at Belmont Lake State Park in West Babylon, New York. The addendum addresses Requests for Information (RFIs) submitted by Preferred Construction Inc. and EJ Electric Installation Co., as well as revisions to construction drawings. Key clarifications include confirmation that the 18" W x 21" D trench drain dimensions are correct (not the 12" W x 12" D shown in Detail 9/C-601); Door 115 is existing and to remain with frame preparation and painting per specifications, with wall demolition not occurring in this area; plywood underlayment is required for new LVT/RSF on the first floor with leveling per manufacturer requirements; wood repairs may be required where existing flooring is present; flooring will not be installed in herringbone or diagonal patterns; 10% attic stock must be provided for LVT/RSF and rubber cove base; project duration remains 420 days regardless of alternate selections; and sheet vinyl has been replaced with LVT flooring throughout. The addendum includes revised sheets AD-111, A-111, and C-600 as attachments and supersedes conflicting information in original bid documents. All bidders must acknowledge receipt of this addendum by inserting its number and date in the bid form or face potential disqualification.

The addendum also clarifies that New York State agencies are exempt from paying New York State sales tax, and contractors should complete and submit Form ST-120.1 (Contractor Exempt Purchase Certificate) to retailers once the contract is awarded to receive tax exemption on applicable purchases for construction, improvement, maintenance, service, or repair of real property. No specific pricing information, set-asides, or funding requirements are detailed in this addendum document, as it serves solely as a clarification and modification instrument to the original bid documents and RFI responses.

View the file

Other files

File	Type	Posted
Addendum 3_LI-BL-2023-001_D006332, D006645-47.pdf	PDF	Sep 2, 2026
Addendum 1_LI-BL-2023-001_D006332, D006645-47.pdf	PDF	Sep 2, 2026
Notice to Bidders_D006632, D006645-47.pdf	PDF	Sep 2, 2026
Addendum 2_LI-BL-2023-001_D006332, D006645-47.pdf	PDF	Sep 2, 2026

On GovTribe

Work with this file

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

OPRHP-Pre-Bid Addendum Version 1, 8/28/2026 Page 1 of 2

ADDENDUM

PROJECT: Renovation of Regional Administration Building Phase 2 – Exterior/Electrical Infrastructure

Upgrades – LI-BL-2023-001

Belmont Lake State Park

General Construction Contract D006632

Mechanical Contract D006646

Electrical Contract D006645

Plumbing Contract D006647

ADDENDUM NO: 4

ISSUE DATE: 10/09/2026

ALL BIDDERS SUBMITTING A BID FOR THE ABOVE-NAMED PROJECT SHALL TAKE NOTE OF THE FOLLOWING CHANGES, ADDITIONS, INTERPRETATIONS, CLARIFICATIONS, ETC. IN CONNECTION WITH THE DRAWINGS AND SPECIFICATIONS

AND OTHER BID DOCUMENTS. THE FOLLOWING INSTRUCTIONS HAVE PRECEDENCE OVER ANYTHING CONTRARILY

SHOWN ON THE DRAWINGS OR DESCRIBED IN THE SPECIFICATION DOCUMENTS, AND ALL SUCH INFORMATION SHALL

BE TAKEN INTO CONSIDERATION AND BE INCLUDED IN THE BIDDERS BID AMOUNT. ACKNOWLEDGE RECEIPT OF THIS

ADDENDUM BY INSERTING ITS NUMBER AND DATE IN THE SPACE PROVIDED IN THE BID FORM. FAILURE TO DO SO

MAY SUBJECT BIDDER TO DISQUALIFICATION.

SUMMARY OF ADDENDUM ITEMS

RFIs: Responses to RFI questions from Preferred, and EJ Electric

• See attached RFI forms

Sheet AD-111: Clarified door 115 graphics to show it is existing to remain.

Sheet A-111: Clarified door 115 graphics to show it is existing to remain.

Sheet C-600: Revised trench drain sizing in note on detail 9.

List of Attachments:

A. LI-BL-2023-001 GC-D006632 - Preferred.pdf

B. LI-BL-2023-001 E-D006645 - EJ.pdf

C. Sheet AD-111

D. Sheet A-111

E. Sheet C-600

06/2025 OPR 103

NYS Office of Parks, Recreation and Historic Preservation Long Island Region

REQUEST FOR INFORMATION (RFI)

OPR-103

Project: LI-BL-2023-001 Renovate Regional Administration Building Exterior/Electrical Infrastructure Upgrades (Phase 2) Contract Number:

Date:

Drawing No:

Request From:

Reply Email Address:

Email Request to: LIEngineeringContracts@parks.ny.gov Request Number:

Spec Section No.:

Remarks:

Question:

Answer:

D006632, D006645-47 Preferred Construction Inc estimating@prefconst.com

4 9.30.26 Refer to dwg. C101

An 18" W x 21" D trench drain is called;

however, Detail 9/C601 indicates a 12" W x 12" D trench drain.

Please clarify which trench drain dimensions are to be used

ADDENDUM 4

18" W x 21" D is the correct dimension. Detail 9 on sheet C-601 will be updated in Addendum 4.

Long Island Region

REQUEST FOR INFORMATION (RFI)

OPR-103

Project: LI-BL-2023-001 Renovate Regional Administration Building Exterior/Electrical Infrastructure Upgrades (Phase 2) Contract Number:

Date:

Drawing No:

Request From:

Reply Email Address:

Email Request to: LIEngineeringContracts@parks.ny.gov Request Number:

Spec Section No.:

Remarks:

Question:

Answer:

D006632, D006645-47 Preferred Construction Inc estimating@prefconst.com

5 9.30.26 Refer to dwg. AD111 and A701

Refer to dwg. AD111 In Room 115, the demolition legend indicates that the wall is to be removed.

However, Drawing A701 (Door Schedule) indicates an existing door and frame, with a door size provided.

Additionally, Detail 21/A400 on Drawing A400 states, “Prepare, prime and paint existing door frame to remain.”

Please clarify whether the door and frame is to be replaced or not. If replaced then provide type of door.

ADDENDUM 4

Door 115 is existing to remain. Frame to be prepared and painted per elevation on 21/A-400. AD-111 and A-111 graphics have been revised to clarify the door is existing, and wall demolition will not occur in this area as the door is existing.

Long Island Region

REQUEST FOR INFORMATION (RFI)

OPR-103

Project: LI-BL-2023-001 Renovate Regional Administration Building Exterior/Electrical Infrastructure Upgrades (Phase 2) Contract Number:

Date:

Drawing No:

Request From:

Reply Email Address:

Email Request to: LIEngineeringContracts@parks.ny.gov Request Number:

Spec Section No.:

Remarks:

Question:

Answer:

D006632, D006645-47 Preferred Construction Inc estimating@prefconst.com

7 10.05.26

1) Section #096500-4 para 3.4D. Plywood; Is plywood required for new LVT / RSF on the 1st floor for this bid scope ? Section #090160-2 para 2.1 Wood Materials Repair - Please confirm no wood repairs is required for this bid scope. Is the 1st Floor subfloor Wood or Concrete ? All new LVT / RSF on the 1st floor to get self level underlayment for this bid scope ? Thickness of self level underlayment for this bid scope ?

RWD refinish wood scope. No Staining, No Repairs; please confirm for this bid scope ? Transition Strip or Saddle for Room 113 to Corridor is which detail on Drawing A-702 ? Corridor 118 new LVT / RSF to existing corridor; Transition Strip or Saddle will be same as at Door 114A, please advise. No diagonal LVT / RSF flooring layout required for this bid scope, please confirm.No herringbone LVT / RSF flooring layout required for this bid scope, please confirm ?No Attic Stock Required for LVT / RSF or RBM Rubber Cove base for this bid scope, please confirm ? If Alternates 1 or 2 are not accepted, will the project still require 420 days to complete ?Drawing A-110, Landing at top of steps to Double Door; Please confirm no new flooring or wall base for this bid scope. Addendum #3 RFI on page 3 of 6 Answer: 6. Please confirm answer is void, no more sheet vinyl in this bid scope, please confirm.

Division 09 : Flooring Questions

ADDENDUM 4

1. Section #096500-4 para 3.4D. Plywood; Is plywood required for new LVT / RSF on the 1st floor for this bid scope?

2. Section #090160-2 para 2.1 Wood Materials Repair - Please confirm no wood repairs is required for this bid scope. Is the 1st Floor subfloor Wood or Concrete?

3. All new LVT / RSF on the 1st floor to get self level underlayment for this bid scope? Thickness of self level underlayment for this bid scope?

1. Provide minimum 1/4-inch-thick APA-rated plywood underlayment specifically intended for resilient flooring and acceptable to LVT manufacturer. Do not install LVT directly over wood planks. Underlayment shall not substitute for required subfloor repairs.

2. Wood repairs may be required where existing flooring is present. Refinishing is required per finish schedule and specifications. 1st floor is a wood sub floor.

3. Leveling required per manufacturers substrate and installation requirements and specifications.

Long Island Region

REQUEST FOR INFORMATION (RFI)

OPR-103

Project: LI-BL-2023-001 Renovate Regional Administration Building Exterior/Electrical Infrastructure Upgrades (Phase 2) Contract Number:

Date:

Drawing No:

Request From:

Reply Email Address:

Email Request to: LIEngineeringContracts@parks.ny.gov Request Number:

Spec Section No.:

Remarks:

Question:

Answer:

D006632, D006645-47 Preferred Construction Inc estimating@prefconst.com

7 10.05.26

Division 09 : Flooring Questions

ADDENDUM 4

4. RWD refinish wood scope. No Staining, No Repairs; please confirm for this bid scope?

5. Transition Strip or Saddle for Room 113 to Corridor is which detail on Drawing A-702?

6. Corridor 118 new LVT / RSF to existing corridor; Transition Strip or Saddle will be same as at Door 114A, please advise.

4. See specifications section 090160 for staining and repair requirements, and response #2 above.

5. Detail 17/A-702 applies to new to existing linoleum/vinyl transitions.

6. Detail 17/A-702 applies to new to existing linoleum/vinyl transitions.

Long Island Region

REQUEST FOR INFORMATION (RFI)

OPR-103

Project: LI-BL-2023-001 Renovate Regional Administration Building Exterior/Electrical Infrastructure Upgrades (Phase 2) Contract Number:

Date:

Drawing No:

Request From:

Reply Email Address:

Email Request to: LIEngineeringContracts@parks.ny.gov Request Number:

Spec Section No.:

Remarks:

Question:

Answer:

D006632, D006645-47 Preferred Construction Inc estimating@prefconst.com

7 10.05.26

Division 09 : Flooring Questions

ADDENDUM 4

7. No diagonal LVT /RSF flooring layout required for this bid scope, please confirm. No herringbone LVT / RSF flooring layout required for this bid scope, please confirm?

8. No Attic Stock Required for LVT / RSF or RBM Rubber Cove base for this bid scope, please confirm?

9. If Alternates 1 or 2 are not accepted, will the project still require 420 days to complete?

7. Flooring will not be installed in a herringbone or in a diagonal pattern.

8. Provide 10% attic stock.

9. Durations remain unchanged with or without the selection of alternates

Long Island Region

REQUEST FOR INFORMATION (RFI)

OPR-103

Project: LI-BL-2023-001 Renovate Regional Administration Building Exterior/Electrical Infrastructure Upgrades (Phase 2) Contract Number:

Date:

Drawing No:

Request From:

Reply Email Address:

Email Request to: LIEngineeringContracts@parks.ny.gov Request Number:

Spec Section No.:

Remarks:

Question:

Answer:

D006632, D006645-47 Preferred Construction Inc estimating@prefconst.com

7 10.05.26

Division 09 : Flooring Questions

ADDENDUM 4

10. Drawing A-110, Landing at top of steps to Double Door; Please confirm no new flooring or wall base for this bid scope.

11. Addendum #3 RFI on page 3 of 6 Answer: 6. Please confirm answer is void, no more sheet vinyl in this bid scope, please confirm.

10. Painted steel stringer occupies space of wall base at stairs. Landing to be concrete to match stair construction.

11. Sheet vinyl has been replaced with LVT flooring. The wood base molding response and the integral cove as part of the epoxy flooring system responses are still applicable. Full previous response is not void.

Long Island Region

REQUEST FOR INFORMATION (RFI)

OPR-103

Project: LI-BL-2023-001 Renovate Regional Administration Building Exterior/Electrical Infrastructure Upgrades (Phase 2) Contract Number:

Date:

Drawing No:

Request From:

Reply Email Address:

Email Request to: LIEngineeringContracts@parks.ny.gov Request Number:

Spec Section No.:

Remarks:

Question:

Answer:

ADDENDUM 4

POLICE

BACKUP

ROOM

POLICE

COMMUNICATIONS

114A

ARREST

ROOM

POLICE

FOYER

114B

POLICE

WING

WOMENS

119A

MENS

ROOM

POLICE

ALTERNATE 1 ALTERNATE 2

REMOVE EXISTING PARTITION WALL,

DOOR, AND TRIM. REMOVE BASE

MOULDING AT BASE OF WALL (TYP.)

REMOVE EXISTING BUILT IN DESK

REMOVE EXISTING DOOR AND

FRAME (TYP.)

COORDINATE REMOVAL AND

TEMPORARY STORAGE OF POLICE

LIFE-SCAN EQUIPMENT AND

FURNITURE. EQUIPMENT AND

FURNITURE TO BE PROTECTED AND

REINSTALLED

REMOVE EXISTING UTILITY SINK

AND CAP PLUMBING. REFER TO

PLUMBING DRAWINGS FOR

ADDITIONAL INFORMATION

(CONTRACT P)

REMOVE EXISTING

CABINETRY

REMOVE EXISTING PANELED WALL

FINISH AT FULL ROOM

REMOVE EXISTING PANELED WALL

FINISH AT FULL ROOM

REMOVE AND STORE EXISTING

FURNITURE IN AREAS OF WORK

THROUGHOUT THE DURATION OF

CONSTRUCTION, REINSTALL

FOLLOWING COMPLETION OF WORK

AS DIRECTED BY OWNER (TYP.)

REMOVE EXISTING

SINK (CONTRACT P)

REMOVE EXISTING FLOORING

DOWN TO SUBFLOOR AT FULL

ALTERNATE 1 AREA.

IN ALTERNATE 2 AREAS REMOVE

EXISTING FLOORING DOWN TO

SUBFLOOR WHERE INDICATED ON

FINISH SCHEDULE ON A-701

CONTRACT NOTES:

1. ALL WORK ON THIS DRAWING IS CONTRACT GC, UNLESS

OTHERWISE NOTED AS CONTRACT M, CONTRACT E OR

CONTRACT P.

H :\ 2954_ N YSP - Term- D005883\ 2954.02- AdminB ldgExterior\ 2954.02_ D rawings

123456789

Description Date

SUBMISSIONS / REVISIONS

No.

Drawn By:

Design By:

Checked By:

Date:

Approved By:

Sheet:Project Number:

Sheet Title:

Drawing Number:

Project Title:

Project Location:

IT IS A VIOLATION OF STATE EDUCATION LAW FOR ANY PERSON,

UNLESS UNDER THE DIRECTION OF A LICENSED ARCHITECT/ENGINEER

TO ALTER THIS DOCUMENT IN ANYWAY. ALTERATIONS MUST HAVE THE

SEAL AFFIXED ALONG WITH A DESCRIPTION OF THE ALTERATIONS,

KATHY HOCHUL

Governor

KATHY MOSER

Commissioner

Seal and Signature

BELMONT LAKE STATE PARK

RENOVATION OF REGIONAL ADMINISTRATION

BUILDING PHASE 2 - EXTERIOR/ELECTRICAL

INFRASTRUCTURE UPGRADES

BELMONT LAKE STATE PARK

WEST BABYLON

NEW YORK, 11704

LONG ISLAND DISTRICT

625 BELMONT AVENUE

WEST BABYLON, NY 11704

LONG ISLAND CAPITAL DISTRICT MANAGER

VESNA HADZIBABIC, PE, LEED AP BD+C

CONSULTANTS:

ARCHITECT

BEYER BLINDER BELLE ARCHITECTS & PLANNERS

120 BROADWAY, 20TH FLOOR, NEW YORK, NY 10271

STRUCTURAL ENGINEER

THORNTON TOMASETTI

120 BROADWAY, NEW YORK, NY 10271

CIVIL ENGINEER

CHA CONSULTING, INC.

3 WINNERS CIRCLE, ALBANY, NY 12205-0269

EXECUTIVE DEPUTY COMMISSIONER

DEPUTY COMMISSIONER, CAPITAL PROJECTS

TOM ALWORTH

BEVIN COLLINS, RA, LEED AP

LI-BL-2023-001 OF XX

MEP ENGINEER

LORING CONSULTING ENGINEERS, INC.

5 VAUGHN DRIVE, SUITE 307, PRINCETON NJ 08540

LIGHTING CONSULTANT

LUMEN ARCHITECTURE, LLC

108 E 16TH STREET, #602, NEW YORK, NY 10003

123456789

LONG ISLAND REGIONAL DIRECTOR

GEORGE GORMAN, JR.

CONTRACT #:

D# 006632 (GENERAL CONSTRUCTION)

T# 006647 (PLUMBING)

Bid Set 6/26/2026

KEY PLAN:

AD-111

06/26/26

DEMO 1ST FLOOR ENLARGED PLAN -

POLICE WING ALTERNATES 1 & 2

1/4" = 1'-0"AD-111

1 DEMO 1ST FLOOR ENLARGED PLAN - POLICE WING ALTERNATE 1 & 2

Addendum 3 10/01/2026

Addendum 4 10/09/2026

POLICE

111POLICE

POLICE

BACKUP

ROOM

ARREST

ROOM

POLICE

FOYER

114B

POLICE

WING

WOMENS

119A

MENS

ROOM

POLICE

114A

112A

115A

114B.1

114B.2

BULLET RESISTANT

BACKGLAZING AT

BOTTOM SASH ONE-WAY

MIRROR (TYP.)

KITCHENETTE. REFER TO

INTERIOR ELEVATIONS

FOR ADDITIONAL

INFORMATION

PARTITION WITH ABUSE

RESISTANT GYPSUM BOARD AT

HOLDING CELL SIDE

FIXED BENCH AND PROTECTIVE

WALL PAD PROVIDED BY

OWNER, INSTALLED BY GC

BUILT IN COUNTERTOP

SUPPORTED ON WOOD

FRAMING

EVIDENCE STORAGE

LOCKERS

BULLET RESISTANT

WINDOW, SEE A-610

BUILT IN COUNTERTOP

WITH COUNTER BRACKETS

ALTERNATE 1 ALTERNATE 2

POLICE

WINDOW

+/- 8' - 5 1/2"

A4A

6' - 8"

3' - 1"

STORAGE

CLOSET

112A

A-4

HOLDING

CELL

115A A-4

A-4

A4A-A

P4A

P4A A6A-A

A4A-A

A-4

111.3

INFILL WALL AT FORMER DOOR

LOCATION. REMOVE AND SALVAGE

EXISTING DOOR MOULDING.

INSTALL BASE MOULDING TO

MATCH EXISTING (TYP)

INFILL WALL AT FORMER DOOR

LOCATION. REMOVE EXISTING

DOOR MOULDING. INSTALL BASE

MOULDING TO MATCH EXISTING

A3A

COUNTER TO BE 2' - 6"

DEEP FROM FACE OF

WINDOW TRIM. SCRIBE

COUNTER TO FIT TIGHT

AGAINST EXISTING

WINDOW TRIM AND

BULLET RESISTANT

BACKGLAZING ADJACENT

TO WINDOWS, COUNTER

TO EXTEND FULL DEPTH

TO WALL (TYP.)

STORAGE

CLOSET

111B

A-551

LIFESCAN PROVIDED

BY PARKS, SHOWN

FOR REFERENCE

ONLY

N.I.C.

.I.

A-551

EXISTING SHAFT

1' - 6"

A4A

W.O.

CORR.

2' - 0"

REINSTALL FURNITURE

REMOVED AND STORED

DURING DEMOLITION

PHASE (TYP)

REINSTALL STORED FURNITURE

AND NEW FURNITURE AS

DIRECTED BY OWNER

FOLLOWING COMPLETION OF

WORK (TYP.)

REFRIGERATOR

KITCHENETTE SINK

(CONTRACT P)

1' - 0"

4' - 0"

GUN STORAGE CABINET

114B.3

A4A

POLICE

COMMUNICATIONS

114A

ARMORY

114C

4' - 7"

1' - 3"

17' - 1"

FLUSH MOUNTED GUN

STORAGE LOCKER

LIMIT OF NEW FLOORING

INSTALLATION, TYP

EXISTING FLOORING AT

CORRIDOR TO REMAIN

WOMENS

TOILET

(W.T.)

W.T.

135A

W.T.

135B

CUST.

CLOSET

ENGINEERING

MENS

TOILET

CORRIDOR

147 REPLACE SINK IN KIND. REFER TO PLUMBING

DRAWINGS FOR SINK SPECIFICATIONS

(CONTRACT P)

PROPOSED METAL SHELVING BY OWNER,

TO BE INSTALLED BY THE PRIME

CONTRACTOR FOR GENERAL

CONSTRUCTION

EXISTING CART BY OWNER. COORDINATE

SHELVING TO ACCOMMODATE SPACE FOR CART

INFILL FLOOR OPENING AT LOCATION OF

REMOVED CHASE WALLS AT BASEMENT

AND 1ST FLOORS. PATCH PLASTER

WALLS AT FORMER WALL LOCATIONS,

FULL HEIGHT. REFER TO STRUCTURAL

DRAWINGS

EPOXY RESIN FLOORING

PROPOSED METAL SHELVING BY OWNER,

TO BE INSTALLED BY THE PRIME

CONTRACTOR FOR GENERAL

CONSTRUCTION

ALTERNATE 3

CONTRACT NOTES:

1. ALL WORK ON THIS DRAWING IS CONTRACT GC, UNLESS

OTHERWISE NOTED AS CONTRACT M, CONTRACT E OR

CONTRACT P.

1/4" = 1'-0"A-111

1 1ST FLOOR ENLARGED PLAN - POLICE WING ALTERNATE 1 & 2

H :\ 2954_ N YSP - Term- D005883\ 2954.02- AdminB ldgExterior\ 2954.02_ D rawings

123456789

Description Date

SUBMISSIONS / REVISIONS

No.

Drawn By:

Design By:

Checked By:

Date:

Approved By:

Sheet:Project Number:

Sheet Title:

Drawing Number:

Project Title:

Project Location:

IT IS A VIOLATION OF STATE EDUCATION LAW FOR ANY PERSON,

UNLESS UNDER THE DIRECTION OF A LICENSED ARCHITECT/ENGINEER

TO ALTER THIS DOCUMENT IN ANYWAY. ALTERATIONS MUST HAVE THE

SEAL AFFIXED ALONG WITH A DESCRIPTION OF THE ALTERATIONS,

KATHY HOCHUL

Governor

KATHY MOSER

Commissioner

Seal and Signature

BELMONT LAKE STATE PARK

RENOVATION OF REGIONAL ADMINISTRATION

BUILDING PHASE 2 - EXTERIOR/ELECTRICAL

INFRASTRUCTURE UPGRADES

BELMONT LAKE STATE PARK

WEST BABYLON

NEW YORK, 11704

LONG ISLAND DISTRICT

625 BELMONT AVENUE

WEST BABYLON, NY 11704

LONG ISLAND CAPITAL DISTRICT MANAGER

VESNA HADZIBABIC, PE, LEED AP BD+C

CONSULTANTS:

ARCHITECT

BEYER BLINDER BELLE ARCHITECTS & PLANNERS

120 BROADWAY, 20TH FLOOR, NEW YORK, NY 10271

STRUCTURAL ENGINEER

THORNTON TOMASETTI

120 BROADWAY, NEW YORK, NY 10271

CIVIL ENGINEER

CHA CONSULTING, INC.

3 WINNERS CIRCLE, ALBANY, NY 12205-0269

EXECUTIVE DEPUTY COMMISSIONER

DEPUTY COMMISSIONER, CAPITAL PROJECTS

TOM ALWORTH

BEVIN COLLINS, RA, LEED AP

LI-BL-2023-001 OF XX

MEP ENGINEER

LORING CONSULTING ENGINEERS, INC.

5 VAUGHN DRIVE, SUITE 307, PRINCETON NJ 08540

LIGHTING CONSULTANT

LUMEN ARCHITECTURE, LLC

108 E 16TH STREET, #602, NEW YORK, NY 10003

123456789

LONG ISLAND REGIONAL DIRECTOR

GEORGE GORMAN, JR.

CONTRACT #:

D# 006632 (GENERAL CONSTRUCTION)

T# 006647 (PLUMBING)

Bid Set 6/26/2026

KEY PLAN:

A-111

06/26/26

1ST FLOOR ENLARGED PLANS

1/4" = 1'-0"A-111

2 1ST FLOOR ENLARGED PLAN - CUSTODIAN CLOSET ALTERNATE 3

118 CORRIDOR FLUSH MOUNTED GUN

CABINETY

SPACESAVER EDHGS04V 13" 26 1/8" 6 1/2" SELECTED FROM MANUFACTURERS 32 STANDARD COLORS

115 ARREST ROOM PROTECTIVE WALL PAD RESILITE MAT

COMPANY

KWIK-STIK 72" 48" 1" FROM MANUFACTURERS STANDARD COLORS. INCLUDE OPTION FOR CUSTOM LOGO PROVIDED BY OWNER

115 ARREST ROOM PRISONER RESTRAINT

BENCH

GLOBAL

INDUSTRIES

PB6-NB-STD

SOLID-STEEL-B

LACK

72" 19" 14" POWER COATED BLACK STEEL FINISH

115 ARREST ROOM EVIDENCE STORAGE

LOCKER

SPACESAVER 08(N) 36" 82" 24" 8-OPENING NON-PASS-THROUGH. SELECTED FROM MANUFACTURERS 32 STANDARD COLORS

115 ARREST ROOM EVIDENCE STORAGE

LOCKER

SPACESAVER 01(N) 36" 82" 24" 4-OPENING NON-PASS-THROUGH. SELECTED FROM MANUFACTURERS 32 STANDARD COLORS

114C ARMORY GUN STORAGE LOCKER STORE MORE

STORE SMS-01-V128-0

50-13488-AL

34" 74" 12.75" 13-COMPARTMENT HANDGUN AND LONG GUN CABINET, WITH INDIVIDUAL LOCKING COMPARTMENTS AND A

MASTER DOOR.. SELECTED FROM MANUFACTURERS STANDARD COLORS

FIRST FLOOR (ALTERNATE #1)

ROOM # ROOM NAME ITEM MANUFACTURER MODEL # WIDTH HEIGHT DEPTH NOTES

LOCATION

REGIONAL ADMINISTRATION BUILDING - FURNISHING AND FIXTURE SCHEDULE

113 POLICE BACKUP ROOM SINK ELKAY LK1410 N/A N/A N/A REFER TO PLUMBING DRAWINGS FOR PLUMBING FIXTURE SCHEDULE (CONTRACT P)

113 POLICE BACKUP ROOM SINK ELKAY

ELUHAD211545

23 1/2" 18 1/4" 4 3/8" REFER TO PLUMBING DRAWINGS FOR PLUMBING FIXTURE SCHEDULE (CONTRACT P)

112A STORAGE CLOSET SHELVING NOT SPECIFIED NOT

SPECIFIED

6' - 8" VARIES 1' - 6" REFER TO CLOSET ELEVATIONS AND SPECIFICATIONS FOR ADDITIONAL INFORMATION

111B STORAGE CLOSET SHELVING NOT SPECIFIED NOT

SPECIFIED

9' - 9 1/2" VARIES 1' - 6" REFER TO CLOSET ELEVATIONS AND SPECIFICATIONS FOR ADDITIONAL INFORMATION

FIRST FLOOR (ALTERNATE #2)

ROOM # ROOM NAME ITEM MANUFACTURER MODEL # WIDTH HEIGHT DEPTH NOTES

LOCATION

REGIONAL ADMINISTRATION BUILDING - FURNISHING AND FIXTURE SCHEDULE

136 CUST. CLOSET UTILITY SINK REFER TO PLUMBING DRAWINGS FOR PLUMBING FIXTURE SCHEDULE (CONTRACT P)

FIRST FLOOR (ALTERNATE #3)

ROOM # ROOM NAME ITEM MANUFACTURER MODEL # WIDTH HEIGHT DEPTH NOTES

LOCATION

REGIONAL ADMINISTRATION BUILDING - FURNISHING AND FIXTURE SCHEDULE

NOTE: ANY PRODUCT MEETING OR EXCEEDING THE CRITERIA OR THE SPECIFIED PRODUCTS MAY BE USED.

SUBMITTALS:

1.PRODUCT DATA: SUBMIT MANUFACTURER'S TECHNICAL DATA AND

INSTALLATION INSTRUCTIONS FOR EACH TYPE OF SIGN REQUIRED.

2. SHOP DRAWINGS: SUBMIT SHOP DRAWINGS FOR FABRICATION AND

ERECTION OF SIGNS. INCLUDE PLANS, ELEVATIONS, AND LARGE-SCALE

DETAILS OF SIGN WORDING AND LETTERING LAYOUT. SHOW ANCHORAGE

AND ACCESSORY ITEMS. FURNISH LOCATION TEMPLATE DRAWINGS FOR

ITEMS SUPPORTED OR ANCHORED TO PERMANENT CONSTRUCTION.

3. SAMPLES: SUBMIT SAMPLES OF EACH SIGN SHOWING FINISHES, COLORS,

SURFACE TEXTURES AND QUALITIES OF MANUFACTURE AND DESIGN OF EACH

SIGN COMPONENT, INCLUDING GRAPHICS.

1. INTERIOR PANEL SIGNS: PROVIDE 1/4-INCH-THICK ACRYLIC SIGN PANEL,

PROVIDE TEST AS INDICATED ON DRAWINGS. SMOOTH SIGN PANEL SURFACES

CONSTRUCTED TO REMAIN FLAT UNDER INSTALLED CONDITIONS WITHIN A

TOLERANCE OF PLUS OR MINUS 1/16 INCH MEASURED DIAGONALLY FROM

CORNER TO CORNER, MANUFACTURED FROM MANUFACTURER'S STANDARD

ACRYLIC SHEET, UNFRAMED. COMPLY WITH REQUIREMENTS INDICATED FOR

FINISHES, COLORS, DESIGNS, SHAPES, SIZES, AND DETAILS OF

CONSTRUCTION (AS SELECTED BY THE ARCHITECT).

2. ENGRAVED COPY: MACHINE ENGRAVE LETTERS, NUMBERS, SYMBOLS, AND

OTHER GRAPHIC DEVICES INTO PANEL SIGN ON FACE INDICATED TO PRODUCE

PRECISELY FORMED COPY, INCISED TO UNIFORM DEPTH. FILL ENGRAVED

COPY WITH ENAMEL.

3. TACTILE CHARACTERS: CHARACTERS AND GRADE 2 BRAILLE RAISED 1/32

INCH ABOVE SURFACES, IN CONTRASTING COLOR.

4. INSTALL UNITS AND COMPONENTS AT THE LOCATIONS DIRECTED BY THE

ARCHITECT, SECURELY MOUNTED WITH CONCEALED THEFT-RESISTANT

FASTENERS. ATTACH TO SUBSTRATES IN ACCORDANCE WITH THE

MANUFACTURER'S INSTRUCTIONS.

5. INSTALL LEVEL, PLUMB, AND AT THE PROPER HEIGHT. COOPERATE WITH

OTHER TRADES FOR INSTALLATION OF SIGN UNITS TO FINISH SURFACES.

REPAIR OR REPLACE DAMAGED UNITS AS DIRECTED BY THE ARCHITECT.

SPECIFICATIONS NOTES:

114B POLICE FOYER DOOR 114B.2 MAX 18" MAX 18"

118 CORRIDOR DOOR 115 MAX 18" MAX 18"

FIRST FLOOR (ALTERNATE 1)

ROOM # ROOM NAME LOCATION WIDTH HEIGHT

LOCATION FINISH AND PREPARATION

REGIONAL ADMINISTRATION BUILDING - SIGNAGE SCHEDULE

Addendum 3 10/01/2026

Addendum 4 10/09/2026

123456789

SUBMISSIONS / REVISIONS

Drawn By:

Design By:

Checked By:

Date:

Approved By:

Sheet Title:

Drawing Number:

Seal and Signature

123456789

Project Title:

Project Location:

BELMONT LAKE STATE PARK

RENOVATION OF REGIONAL ADMINISTRATION

BUILDING PHASE 2 - EXTERIOR/ELECTRICAL

INFRASTRUCTURE UPGRADES

BELMONT LAKE STATE PARK

WEST BABYLON

NEW YORK, 11704

CONTRACT #:

D# 006632 (GENERAL CONSTRUCTION)

D# 006645 (ELECTRICAL)

KATHY HOCHUL KATHY MOSER

LONG ISLAND DISTRICT

625 BELMONT AVENUE

WEST BABYLON, NY 11704

LONG ISLAND CAPITAL DISTRICT MANAGER

VESNA HADZIBABIC, PE, LEED AP BD+C

CONSULTANTS:

ARCHITECT

BEYER BLINDER BELLE ARCHITECTS & PLANNERS

STRUCTURAL ENGINEER

THORNTON TOMASETTI

CIVIL ENGINEER

CHA CONSULTING, INC.

EXECUTIVE DEPUTY COMMISSIONER

DEPUTY COMMISSIONER, CAPITAL PROJECTS

TOM ALWORTH

BEVIN COLLINS, RA, LEED AP

MEP ENGINEER

LORING CONSULTING ENGINEERS, INC.

LIGHTING CONSULTANT

LUMEN ARCHITECTURE, LLC

LONG ISLAND REGIONAL DIRECTOR

GEORGE GORMAN, JR.

KEY PLAN:

C-600

JJE

10/09/26

Question: Please advise on the tax status of this project.

Answer: New York State (NYS) agencies are exempt from paying NYS sales tax. Contractors working for NYS Office of Parks, Recreation and Historic Preservation (OPRHP) that make purchases to construct a building, structure, improve real property or to maintain, service, or repair a building, structure, or real property, should complete and provide the Form ST-120.1 to retailers to receive tax exemption once the contract is awarded.

The Contractor Exempt Purchase Certificate ST-120.1 can be found at the Department of Taxation and Finance website: https://www.tax.ny.gov/pdf/current_forms/st/st120_1_fill_in.pdf. The form itself further explains what purchases are applicable to receive tax exemption.

Contract Number: D006645

Request From:: E-J Electric Installation, Co.

Reply Email Address: kulmschneider1@ej1899.com

Request Number: 1

Spec Section Number:

Remarks: Tax Status

Date3_af_date: 10/2/2026

Drawing Number:

File details come from the government source that posted it. Updated Oct 26, 2026.