Addendum #1

ITB# 21-363-J«NUMBER» Addendum #1 Page 1 of 2

City of Roswell Purchasing Division

Randy Knighton Lori Henry City Administrator Mayor

ADDENDUM NUMBER 1

ITB # 21-363-J

FRONT LOADING-REAR LOADING-DUMPSTER DELIVERY TRUCKS

12/16/21

To All Prospective Bidders:

In reference to the ITB listed above, the following Changes are hereby incorporated into the Invitation To Bid:

Changes

The following Attachments to this Addendum #1 are identified and incorporated into the ITB documents:

Attachment A: “Revised specifications for Front & Rear Loading Garbage

Truck”

All other terms, conditions, and deadlines remain the same.

COMPLETE THIS ADDENDUM, SIGN and SUBMIT with the ITB to:

City of Roswell – Purchasing Division Roswell City Hall

38 Hill Street, Suite 130 Roswell, GA 30075

I hereby acknowledge receipt of Addendum 1 and have incorporated the changes into my proposal response for the above mentioned ITB.

COMPANY NAME: __________________________ CONTACT PERSON: ____________________

ADDRESS: _________________________________ CITY: ______________ STATE: ____ ZIP: ____

PHONE: ________________ FAX: _______________ EMAIL ADDRESS: _______________________

SIGNATURE: ____________________________________ DATE: ____________________________

ITB# 21-363-J«NUMBER» Addendum #1 Page 2 of 2

Attachment A (Separately Paginated)

CITY OF ROSWELL, GA

40 Yard Front Loader (Eject) AIR Refuse Collection Truck

Bid Specifications

SCOPE: It is the intent of this specification to describe a hydraulically actuated packer body of the front loading type with the following specifications considered necessary to perform the work assigned. The body shall be capable of compacting and transporting refuse to a landfill or transfer station and dispensing the load by means of hydraulic ejection. The bodyshall not be required to be tilted, lifted, or otherwise displaced from the chassis in order to eject the load.

GENERAL: All equipment furnished under this contract shall be new and unused, and the same as the manufacturers current production model. Accessories not specifically mentioned, but necessary to furnish a complete unit ready for use shall also be included. The equipment furnished shall conform to all ANSI Safety Standards Z245.1-2012.

BID SPECIFICATIONS

Bidder Shall Complete The Following If No, State Specifically The Item Being Offered

A. CAPACITY YES NO OFFERED

3. Body weight (exclusive of options) shall not exceed:

Capacity Weight

40 Cu. Yd. 17,200 pounds

1. The body shall have a capacity of:

40 Cubic Yards

BODY DIMENSIONS

1. Maximum overall body width not to exceed 101-1/2”

2. Maximum overall length and height (with tailgate in locked position and arms & forks in down position) above the chassis frame not to exceed:

Capacity OAL Length Height WB

40 Cu. Yd. 457” 110-3/4” 208” - 210”

YES NO OFFERED

C. BODY CONSTRUCTION

1. The body sides shall be constructed of 1/4” AR450 formed to a radius for added strength. Must be AR450.

2. The body roof shall be constructed of 8 Gauge 80,000 PSI yield steel.

3. The body floor shall be curved and made of 3/16” AR235.

4. The floor longitudinal shall be 2" x 6" x 1/4" structural tube.

D. HOPPER

1. The hopper shall have a minimum capacity of 12 cubic yards.

2. The hopper floor shall be constructed of minimum

1/4” AR450 steel. Must be AR450.

3. The hopper sides shall be constructed of one-piece wall minimum

3/16” AR450 steel formed to a radius for additional strength.

Straight hopper sides are not acceptable.

4. The hopper front shall be enclosed with expanded metal for viewing behind the packer blade and to prevent trash from blowing out.

5. The hopper shall be lined with six (6) 1/4” wear strips with a minimum of AR450 to match the wear strips on the packer panel.

Plow steel wear strips are not acceptable.

6. There shall be a hydraulic sliding hopper cover constructed of 14 Ga. A569 Steel and reinforced with 1” x 2” tube.

7. The hopper cover shall be powered by a one (1) 2-1/2” x 92” double acting hydraulic cylinder. State Dimenstions:

8. The hopper cover shall open automatically when raising the lift arms.

9. There shall be a SPDT (Single Pull Double Throw) electrical switch in the cab to manually close the hopper cover.

10. There shall be a sliding side access door with a PTO interlock and shall be a minimum of 31” x 31”.

State Dimensions of Door:

E. PACKING MECHANISM

1. The packing panel face sheet shall be constructed of

1/4” AR450 steel.

2. The packing panel shall slide in a track constructed of 1/4” formed 50K channel and lined on all three sides with AR450 wear strips.

3. The packing panel shall be activated by two (2) 6-1/2” x 182” stroke four stage telescopic hydraulic cylinders with

U-cup seal design and rod scrapers

4. The panel shall have a pack cycle of 25-27 seconds.

5. The packing panel shall be 79” high and 84” wide with adjustable side scraper wings. State Dimensions:

6. The packing panel shall exert a minimum of 133,000 lbs. of packing force throughout the pack cycle.

State the packing force of the packing panel:

F. TAILGATE

1. The tailgate shall be top hinged and of the bustle type.

2. The tailgate bubble shall be constructed of 1/4” AR450 steel.

3. The tailgate side sheets shall be constructed of 10 Gauge

80,000 psi Hi-Tensile steel.

4. The tailgate shall be secured to the body using two (2) set of hinges with 1-1/2” hinge pins at the roof line.

5. The tailgate shall be unlocked, opened and closed by two (2)

3” x 25-1/2” double acting hydraulic cylinders with restrictors to prevent precipitous decent in case of a hydraulic line ruptures.

6. The tailgate shall have a four-point positive lock system without the need for turnbuckles.

7. The tailgate shall be equipped with a one piece replaceable rubber gasket, extending across the bottom width of the tailgate and vertically up the side 36”.

8. A warning icon on the in-cab display and buzzer shall be installed in the cab to indicate when the tailgate is open.

YES

G. LIFTING ARMS

1. The arms shall be of fabricated tube design. The arm is comprised of 3” x 3/8” 100K upper and lower continuous flat bar. (Multiple piece welded flat bar is unacceptable) The arms shall be covered with 3/16” AR450 steel side plates.

2. The lift arms shall have a 10,000 lbs. lift capacity.

3. The arm shall provide a progressive slow stop before coming into contact with the rubber arm stops by use of the proportional control valve. (Internal cushioning of the arm cylinders is not acceptable).

4. The load arm cycle time shall not be more than 12-13 seconds.

5. The lift arms shall be powered by two (2) 5” x 45-1/4” double acting cylinders with 2” rods.

6. The arm pivot shaft shall be constructed of 4-1/2” OD x 1/2” wall DOM tubing.

NO

OFFERED

7. The pivot bushings shall have at least 4 split type bronze bushings to prevent wear.

8. The forks shall be constructed of 1-1/2” 100,000 psi steel 48-3/4” long from bump stop to tip and tapered at the end.

9. The forks at the dump position shall not exceed 13’ 6” above the ground.

10. The fork rotation shall be accomplished by two (2) 4” double acting hydraulic cylinders, 24” stroke, with a minimum 1-1/2” rod.

11. The fork pivot shaft shall be constructed of 4-1/2” OD x 1/2” wall

DOM tube.

12. The fork bushings shall be of the split bronze type bolted to the arms with four (4) 3/4” grade 5 bolts on each side.

13. There shall be UHMW arm scuff plates mounted to the upper hopper sides.

H. CONTROLS

1. All compactor operation controls are to be located in the truck cab and mounted for operator convenience and comfort.

2. Warning signals shall be incorporated into all circuits monitoring abnormal compactor operations.

3. All controls must be Electric over air

4. The packer, hopper cover, and rear door operation shall be controlled by SPDT electrical switches.

5. The rear door shall not operate without depressing a safety switch in conjunction with the tailgate rocker switch to prevent accidental opening of the rear door.

6. The arm control shall have an interlock to prevent dumping behind the packer panel.

7. LED lights shall be used on the controller for trouble shooting purposes.

8. Proximity switches shall be used throughout the body no exceptions.

I. HYDRAULICS

1. Hydraulic reservoir shall be supplied with a minimum capacity of

70 gallons and equipped with a fluid sight gauge, temperature indictor, air breather filter, magnetic trap, and a ball valve on the suction line. State size of tank in gallons:

2. The reservoir shall have a 100 mesh suction strainer and equipped with a built in 3 PSI bypass for pump protection.

3. The body shall be powered by a front mounted Denison vane pump.

4. All hydraulic functions shall be controlled by an air operated VA35 hydraulic valve.

5. All hydraulic hoses shall be SAE approved construction with hose burst pressure four times working pressure.

6. Where possible seamless steel tubing with zinc clear coating shall be used and held in place with shock absorbing bolt on clamps.

7. All hose ends, tubing and adapters shall have JIC 37 degree flare fittings.

8. Normal maximum operating pressures shall not exceed 2450 PSI.

9. The hydraulic system shall incorporate a relief valve to protect all components from excess pressures.

10. All cylinder rods shall be chrome plated except the pack cylinders which will have thermal chemical process with ONC.

11. Automatic packer - The hydraulic system shall include automatic pack function to allow a continuous pack cycle.

12. The packer panel in extend or retract mode shall automatically accelerate at 1,500 RPM when truck is in neutral.

13. The auto pack function shall include a pack start button and a neutral safety to disable automatic acceleration if the transmission is in gear. PTO kill proximity switch provided on the hopper access door.

J. ELECTRICAL

1. All wiring shall be loomed or in conduit.

2. The body shall be equipped with approved LED clearance, warning, tail, license, stop and turn signals in compliance with the national safety standards.

3. All clearance, back-up, and directional lights shall be shock mounted and be mounted in rubber grommets.

4. The body shall be equipped with an external audio back-up alarm activated when the chassis is in reverse.

5. An icon on the in-cab display screen shall illuminate when the tailgate is open and an audible alarm will sound when the tailgate is open.

6. A camera system shall be installed with a monitor for viewing rear of body and for safety when truck is in reverse. System will include 7” LCD color monitor with (1) reverse camera and (1) camera in hopper area.

K. PAINT

1. The body shall be properly cleaned of all dirt, oil and welding slag. A gray lead-free Epoxy primer with rust inhibitors shall be applied.

2. Axalta IMRON ELITE shall be applied as top coat.

Paint code: _ L0943EB

Paint color: Vermillion Red

L. MOUNTING

1. Body shall be mounted in accordance to industry standards. No welding shall be performed on the chassis frame in the mounting process.

M. WARRANTY

1. Body: Minimum 1 Year

2. Hydraulics: Minimum 1 Year

3. Cylinders: Minimum 2 Years

After date of acceptance of the unit.

N. OPTIONAL EQUIPMENT

1. Hopper Lights-Two white LED lamps. The lights shall be capable of illuminating the hopper. The lights will be activated by a switch in the cab of the chassis.

2. Service Hoist- The body shall be equipped with a self-contained 12

VDC motor and pump and separate cylinders to lift the body for service and access to transmission. The body shall also be equipped with safety prop rod to prevent body from falling if cylinders should fail.

3. Fork Limiter to retain can on forks during dumping.

4. Remote Grease for Tailagate Hinge and Cylinders.

5. Aluminum Drip Pan Below Tailgate Seal.

6. Shovel/Broom Rack.

7. Large Caution Decal for Tailgate.

8. LED Mid Body Backup Lights.

9. LED Work Lights- (2)mounted on canopy directed toward can.

10. Strobe Light Beacon (Surface Mounted).

11. Strobe Light Package- (Integrated Strobe System with turn signals (2) round lights mounted in upper tailgate).

12. Strobe Light Package- (Integrated Strobe System with turn signals (2) round lights mounted in lower tailgate).

13. Low Fluid Level Switch Visual Indicator in Cab w/Shutdown

14. Hour Meter on PTO.

15. Quick Disconnect Pressure Gauge.

16. Steel Tool Box- 18"x18"x24".

17. 20 lb. Fire Extinguisher.

66,000 GVW Cabover Chassis Specification for

CITY OF ROSWELL, GA.

Yes No Offered

2022 or newer Model Year Cab Over Chassis

Shall be Left Hand Drive

6 Cyl Diesel Engine, 355HP/ 1260 FT/LBS torque

Please list what engine you are offering:

Engine must meet all current Federal Emissions Requirements

Remote PTO and Throttle Provision

Air Cleaner- minimum 13"

37.4 CFM Air Compressor

12V 160A Alternator

Batteries (3) 12V 2280 CCA

Battery Disconnect Switch with lockout terminals

12V Starter

Fan /Drive Radiator with Extended Life Coolant 120v Engine block Heater Engine Protection System- Audible/Visual Fuel Filter- Fuel- Water separator with Heat Front Mount PTO Adapter Removable Type Bug screen Must have engine/ exhaust brake Extended Life Coolant Wheel Base and Cab to Axle must be compatible with body requirements

Transmission Equipment:

Allison 4500 RDS 6 Speed Rugged Duty Series Gen 5 w/ Prognostics Meritor/Spicer or Equivalent Main Driveline Transmission Oil Cooler Synthetic Automatic Transmission Fluid Allison Output Function S Neutral Indicator

Exhaust/Emissions:

DEF Tank 6.6 Gallons

Outlet Diffuser

Muffler/Exhaust System compatible with Body

Exhaust Stacks/ Exhaust Cover

Front Axle:

20,000 lb Capacity Minimum 20000 lbs. Taper leaf Front Springs Meritor “S” Cam Type 16.5 x6 Q+ Brakes or Equivalent

Meritor R403 Brake Lining or equivalent

Dust Shields for Front Axle Unit must have right hand drive capability

Double Acting Type Front Shock Absorbers

Power Steering Reservoir

Synthetic Axle Lube

Rear Axle:

46,000 lbs. Rear Axles

46,000 lbs. Rear Suspension w/ extra thick spring thickness

Meritor Cam 16.5” Brakes or equivalent

54” Axle Spacing (May vary per Manufacturer Specs

Inter axle Differential Lock (Both Axles)

Synthetic Axle Lube

Dust Shields for Rear Axle

Iron Rear Hubs

SBM Valve (Spring Brake Modulation) for emergency braking

Upsize Parking Brakes

Synthetic Rear Axle Lubricant

Bendix Anti-lock Brakes with traction control

Frame Equipment:

Wheelbase (as needed for body and tank installation)

Cab to Axle as needed for body mounting

Frame Rails- Steel

State the dimensions of your frame rails

Aluminum battery box

Flush-Painted Steel Front Bumper

Skid Plate Under Bumper and Radiator

Front Tow Capability- removable tow hook(s) /pin(s)

80 Gallon Steel Fuel Tank (BOC Forward As Possible)

Front Mud Flaps 12” or equivalent

1/4 " Inner Frame Rail Liner

Air:

Air Dryer Wabco - Heated

Automatic Wet Tank Drain with Heater

Air Tank Auto Drain Valve, Heated on Supply Tank

Air reservoir drain system

Auxiliary Work Brake Control Accessible on Both Sides

Air Compressor Meritor/Wabco or Equivalent

Electrical:

Back Up Alarm

LED Roof Marker Lamps

LED Headlights

Parking lamps

Daytime Running Lights

Headlight Protection Package

LED Front & Side Direction Indicators & Marker Lights

Circuit Protection Device-Circuit Breakers

PTO:

Must accept front mount pump (FEPTO provision with Front Bumper Extension)

Yes No Offered Cab:

Combo Heater/Air Conditioner/Defroster unit Factory Installed

Tachometer with Hour Meter

Voltmeter Speedometer w/ Odometer Fuel Level Gauge 5lb Cab Mounted Fire Extinguisher Transmission Oil Temp Gauge

(1) Dash Mounted Single Acting Air PTO Control Low air pressure warning system AM/FM Radio Dual Mid -Back Air Ride Suspension Seats

To provide Sit Down operation right hand drive Lap & Shoulder Seat Belts on Both Sides of Cab Adjustable Tilt/Telescoping Steering Wheel Self-Cancelling Turn Signals Interior Sun visors Both Sides Windshield Protection Package Air Horn LH & RH Electric & Heated west coast Exterior Mirrors Heated Convex Mirrors both sides Cab tilt mechanism with hydraulic/ air assist Steel Grab Handles Triangle Reflector Kit Must provide 4 keys total per truck

Tires/Wheels:

Front Tires-315/80R 22.5 L 20 ply radial Front Wheels- Accuride 22.5x9.00 Steel Rear Tires- 315/80R 22.5 L 20 ply radial Rear Wheels- Accuride 22.5x9.00 Steel

Total of 4 tires per rear Axle (Total of 8 rear tires)

Paint:

Vermillion Red (L0943EB) w/ Urethane Clear Coat Black Frame Color

Warranty:

Engine Plan 2 and Engine After Treatment system warranty for 60 months/ 250,000 miles to include towing.

Chassis Warranty for 12 months/100,000 miles

Transmission Warranty 36 months/unlimited miles.

CITY OF ROSWELL, GA BID SHEET

QUANTITY: ONE (1) OR MORE

BODY MANUFACTURER

CHASSIS MANUFACTURER

COMPLETED UNIT DELIVERY (DAYS)

COMPLETE UNIT PRICE ___________________________

COMPANY:

NAME:

Print or Type:

ADDRESS:

SIGNATURE:

TITLE:

PHONE:

DATE:

EMAIL:

CITY OF ROSWELL, GA

27 Cubic Yard HIGH COMPACTION Rear Loading Refuse Collection Truck Body

Bid Specifications

SCOPE: It is the intent of this specification to describe a hydraulically actuated packer body of the rear loading type with the following specifications considered necessary to perform the work assigned. The body shall be capable of compacting and transporting refuse to a landfill or transfer station and dispensing the load by means of hydraulic ejection. The body shall not be required to be tilted, lifted, or otherwise displaced from the chassis to eject the load.

GENERAL: All equipment furnished under this contract shall be new and unused, and the same as the manufacturers current production model. Accessories not specifically mentioned, but necessary to furnish a complete unit ready for use shall also be included. The equipment furnished shall conform to all ANSI Safety Standards A245.1-1984.

BID SPECIFICATIONS

Bidder Shall Complete the Following

The following are the specifications set forth by CITY OF ROSWELL, GA deemed as the requirements for a 27 Yard Rear Loader Garbage Truck.

A. CAPACITY

1. The body shall have a capacity excluding hopper of:

27 Cubic Yards _____ _____ ____________

2. The body shall be able to pack up to 1,100 pounds per cubic yard. _____ _____ ____________

B. BODY DIMENSIONS

1. Maximum overall width not to exceed 96”. _____ _____ ____________

State the width of the body being bid: ________________

2. Overall length and height (with tailgate in locked position) above the chassis frame:

Capacity Length Height CT (cab to center of tandem)

a. 27 Cu./Yd. 296” 100” 172” _____ _____ ____________

If the body doesn’t meet this, please state the dimensions: ____________________________________

Rear loading Refuse collection Truck Body

(Continued)

3. Body weight (exclusive of options):

Capacity Weight

e. 27 Cu./Yd. 15,400 pounds _____ _____ ____________

State the weight of the body being bid: ________________

C. BODY CONSTRUCTION

1. Body sides, roof shall be curve shell design without the need of side bracing. Continuous operation at maximum loads without harmful deformation or wear. _____ _____ ____________

2. The roof shall be constructed of 10 gauge 80,000 PSI steel. _____ _____ ____________

3. The body sides shall be constructed of 10 gauge, 80,000 PSI steel.

4. Sides shall be braced along the bottom from tailgate tapered to a point at the front of the body. Braces shall be interconnected with floor gussets and continuously welded. Rear portion of side brace shall connect to a triangular gussets and all seams continuously welded for maximum strength. _____ _____ ____________

State the dimensions of the body side bracing: ______________________________________

State the size of the triangular gussets: ____________________________________________

5. The body upper floor sides shall be 10 gauge 50,000 PSI steel. _____ _____ ____________

7. The body floor center shall be 7 gauge 100,000 PSI plate high tensile steel.

State the size of the floor in the body: __________________

8. The trough shall be constructed of two 8” channel sills to hold the ejection panel in line under the most extreme load conditions. _____ _____ ____________

9. Side access door shall be located on the street side of the body sidewall. _____ _____ ____________

10. Side access door shall be equipped with a safety interlock to disengage PTO when door is open. _____ _____ ____________

D. TAILGATE DIMENSIONS

1. Hopper opening width shall not be less than 80”. _____ _____ ____________

State the size of the hopper opening: ___________________

2. Hopper capacity shall not be less than 3.55 cubic yards as calculated By WASTEC DWRP03 No.1 method. _____ _____ ____________

3. Hopper cycle time with the standard PTO and pump shall have an average of 21-23 seconds. ____ _____ __________

Please state the average cycle time: ____________________

E. TAILGATE CONSTRUCTION

1. Tailgate sides shall be constructed of a minimum of 7-gauge high tensile sheet steel, and the upper sides shall be constructed of a minimum of 10 gauge high tensile sheet steel. _____ _____ ____________

2. Tailgate sides shall be reinforced by bracing constructed of 7 gauge formed steel and fully welded in a horizontal position for maximum support. _____ _____ ____________

State the dimensions of the bracing: ____________________

State the size of the tailgate sides reinforcement bracing: _________________________

3. The slide panel guide track shall be constructed of AR400 steel reinforced by formed 1/4” high tensile steel. _____ _____ ____________

State the dimensions of the guide track: _________________

State the size of the slide panel guide track: _______________

4. The tailgate shall be equipped with an automatic hydraulic locking system with a pilot check valve to ensure constant pressure for a tight seal. _____ _____ ____________

5. The tailgate shall be unlocked raised by two double acting cylinders equipped with clevis ends and restrictors to prevent precipitous tailgate decent in the event of a broken hydraulic line. _____ _____ ____________

State the bore of the tailgate cylinder: __________________

6. The tailgate perimeter edge shall be reinforced by a minimum 2” x 2” structural tube steel. _____ _____ ____________

7. Tailgate shall be equipped with a chemically inert seal to provide a watertight seal. (24” high) _____ _____ ____________

8. Hopper floor shall remain stationary during the packing cycle and shall be equipped with a 2” drain plug. _____ _____ ____________

9. Hopper floor shall be a minimum of 1/4” 100,000 PSI sheet adequately braced to withstand maximum pressures imposed upon it. Hopper back 1/4” T-1 steel.

State the size of the hopper floor: ____________________ State the PSI of the floor: ___________________________ State the size of the hopper back: ____________________

10. The hopper load sill shall be constructed from a minimum 3/8” plate and be even with the chassis frame height _____ _____ ____________

State the size of the hopper load sill plate: _____________

11. Self-cleaning grip bolt on strut steps and grab handles shall be required on both sides of the tailgate. _____ _____ ____________

12. Auto locking tailgate. _____ _____ ____________

F. PACKING MECHANISM CONSTRUCTION

1. The sweep panel shall be of the backhoe packing type, and designed to have a minimum clearance to thoroughly clean the hopper bottom during cycling. _____ _____ ____________

2. The sweep panel face plate shall be constructed of 1/4” high tensile sheet steel and shall be reinforced with (4) integral braces made from 1” steel plate. _____ _____ ____________

State the size of the sheet steel: _______________________ State the size of the braces steel plate: _________________

3. The sweep panel shall be powered by two double acting cylinders equipped with bronze bushings. _____ _____ ____________

State the size of the sweep cylinders: ___________________

4. The slide panel face plate shall be constructed of 1/4” high strength sheet steel. _____ _____ ____________

State the size of the slide panel face plate: ______________

5. The slide panel shall be powered by two stroke double acting cylinders. _____ _____ ____________

State the bore size: _______________ State the stroke size: ______________

6. The linear slide movement of the panel shall be accomplished on two high density UHMW guide bearing blocks.

7. The pivotal rotation of the sweep panel shall be accomplished through the sweep panel pivot which shall consist of two 2" diameter stress proof pivot pins with bronze bushings. _____ _____ ____________

State the diameter of the stress proof pivot pins: ___________

8. Both ends of the pivot shaft shall be equipped with bronze bushings.

G. EJECTION PANEL CONSTRUCTION

1. Ejection blade shall form the front of the body and be hydraulically operated and designed to have a minimum clearance too thoroughly clean the body during cycling. _____ _____ ____________

2. The load shall be discharged by means of a positive ejection system.

A double acting, telescopic cylinder shall extend and retract the full length of the body. _____ _____ ____________

3. The ejection panel face plate shall be constructed of 10 gauge 50,000 PSI sheet steel and reinforced with trapezoidal cross members of high Tensile strength. _____ _____ ____________

State the steel gauge of the ejection panel face plate: _______ State the PSI of the sheet steel: __________________________

4. The ejection panel shall slide in an 8” channel sill on four high density UHMW slide bearing blocks. _____ _____ ____________

5. Ejection panel bearing blocks must be able to be replaced without removing ejection panel. _____ _____ ____________

6. The telescopic cylinder shall be horizontally positioned & consist of the following dimensional characteristics:

Capacity Stage Bore

f. 27 Cu./Yd. 4 Stage 7.5” _____ _____ ____________

State the bore of the ejection cylinder: __________________

7. No clamping cylinder or clamping mechanism shall be required. _____ _____ ____________

H. CONTROLS

1. The ejector panel and tailgate raise control shall be mounted inside the front left-hand side of the body. Controls are accessed through opening located in access door. Controls will not come into contact with any refuse and are protected from outside elements. _____ _____ ____________

2. An electrical device shall be supplied to automatically raise the engine speed to the proper RPM during the packing cycle. _____ _____ ____________

3. An additional throttle advance switch shall be mounted at the front left hand side of the body near the tailgate raise control handle and at the rear right hand side near the packing blade control. _____ _____ ____________

4. A Back-Pack Valve shall be required to automatically advance the ejector panel when packing against it. _____ _____ ____________

5. The packing panel control shall be designed to accomplish the normal packing cycle in two steps and shall be reversible or stopped at any time during the cycle. _____ _____ ____________

6. The packing panel control shall be a two-handle design and located at the rear of the tailgate on the curbside. _____ _____ ____________

I. HYDRAULIC SYSTEM

1. A power takeoff/pump combination shall be used to power the hydraulic system and shall have pack on the go. _____ _____ ____________

2. All hydraulic valve shall be mechanically operated and use direct link controls. _____ _____ ____________

3. The hydraulic pump shall provide a delivery of 36 GPM at 1400 to 1500 RPM. _____ _____ ____________

4. Normal maximum operating pressures shall not exceed 2750 PSI _____ _____ ____________

State the operating pressure: _______________

5. The hydraulic system shall incorporate a relief valve and a hydraulic pressure gauge to protect all components from excess pressures. _____ _____ ____________

6. All hydraulic hoses shall conform to S.A.E. Standards. No flat spots in hoses will be acceptable. Shall be covered w/ nylon sleeve. _____ _____ ____________

7. Hydraulic tank shall not be less than 55 gallons and must be equipped with a sight and temperature gauge. The tank shall be located inside the body. _____ _____ ____________

8. A replaceable 10 micron absolute in tank immersed filter with by-pass valve and visual indicator shall be furnished in the return line of the hydraulic system. _____ _____ ____________

9. A shut-off valve shall be mounted on the suction line near the oil tank. _____ _____ ____________

10. All cylinder rods shall be chrome plated. _____ _____ ____________

11. Sweep and slide cylinder rods induction hardened. _____ _____ ____________

J. ELECTRICAL

1. All body wiring shall be color coded in factory harness with sealed connectors. _____ _____ ____________

2. Body to chassis wiring shall be in sealed junction box at front of body with sealed connectors. _____ _____ ____________

3. The body shall be equipped with approved LED clearance, warning, tail, license, stop and turn signals in compliance with the national safety standards. _____ _____ ____________

4. The body shall be equipped with an external audio back up alarm activated when the chassis is in reverse. _____ _____ ____________

5. Driver alert buzzer and safety stop shall be installed at the rear of the tailgate located by the packing controls, both sides of body. _____ _____ ____________

6. A light shall illuminate in the cab when the tailgate is open and an audible alarm will sound when the vehicle is placed in reverse while the tailgate is open. _____ _____ ____________

7. A light bar shall be mounted on the upper section of the tailgate and consist of stop, turn and three clearance lights, in accordance to the national safety standards. _____ _____ ____________

8. It shall include a rear vision camera, Safety Vision or equivalent. _____ _____ ____________

K. PAINT

1. The body shall be properly cleaned of all dirt, oil, and welding slag.

Gray DuPont Epoxy primer with rust inhibitors shall be applied. _____ _____ ____________

2. DuPont Imron 5000 paint shall be applied. _____ _____ ____________

Specify paint code: ___L0943EB_________________________

Specify paint color: _____Vermillion Red___________________

L. MOUNTING

1. Body shall be mounted in accordance to industry standards. No welding shall be performed on the chassis frame in the mounting process. _____ _____ ____________

M. SAFETY

1. Access door to body to be equipped with an interlock switch to disable the hydraulic system when the door is open. _____ _____ ____________

2. Safety Shut Down switch to be provided sides of the tailgate. _____ _____ ____________

3. Driver alert switch to be provided on both sides of tailgate . _____ _____ ____________

4. 20 lb. Fire extinguisher mounted on body or truck frame. _____ _____ ____________

5. Triangle reflector kit located in cab. _____ _____ ____________

N. WARRANTY

1. Manufacturer’s limited warranty shall apply for a period of one year for body and hydraulics, and two years for cylinders after date of acceptance of the unit. _____ _____ ____________

O. OPTIONAL EQUIPMENT

1. HOPPER LIGHTS- 2 LED lights shall be mounted on the Upper half of the tailgate. The lights will be activated by a Switch in the cab of the chassis. _____ _____ _____________

2. Strobe Light Package- (Integrated Strobe System)- 2 round Lights mounted upper tailgate. _____ _____ _____________

3. Strobe Light Package- (Integrated Strobe System)- 2 round Lights mounted lower tailgate. _____ _____ _____________

4. Strobe Light Package- (Integrated Strobe System)- 2 round Lights mounted front of bulkhead. _____ _____ _____________

5. Full Body Welds _____ _____ _____________

6. Hopper Access Ladder _____ _____ _____________

7. Mid Body Backup Lights _____ _____ _____________

8. Broom /Shovel Rack _____ _____ _____________

9. 7” Safety Vison Color Camera System _____ _____ _____________

10. Remote Grease System for Tailgate and Cylinders _____ _____ _____________

11. Electronic Bypass Filter Located in Cab _____ _____ _____________

12. PTO Hour Meter _____ _____ _____________

13. Low Hydraulic Fluid Level Indicator Light _____ _____ _____________

14. Cup Holder on each Side of Body _____ _____ _____________

15. Mud Flaps Behind Rear Axles _____ _____ _____________

16. (2) Barker Rotary Cart Tippers _____ _____ _____________

64,000 GVW Conventional Cab Chassis Specification for

CITY OF ROSWELL, GA.

2023 or newer Model Year Cab Over Chassis

Shall be Left Hand Drive

Cummins L9 Engine, 350HP/ 10500 FT/LBS torque

Please list what engine you are offering:

Engine must meet all current Federal Emissions Requirements

Shall have a minimum of 80-gallon fuel tank ____________________________

Front tires shall be 385/65R22.5 ____________________________

Rear tires shall be 11R22.5 ____________________________

Heater /Defroster / Air Conditioner _____________________________

Electric Door Locks _____________________________

Powered Windows _____________________________

Dual West Cost Powered / Heated Mirrors _____________________________

AM/FM -Bluetooth Tuner Radio _____________________________

Transmission Equipment:

Allison 3000 RDS

Front Axle:

18,000 lb Capacity

Rear Axle:

46,000 lb Capacity

Paint:

Vermillion Red (L0943EB) w/ Urethane Clear Coat Black Frame Color

COMPLETED UNIT DELIVERY (DAYS)

COMPLETE UNIT PRICE ___________________________

COMPANY:

NAME:

Print or Type:

ADDRESS:

SIGNATURE:

TITLE:

PHONE:

DATE:

EMAIL: