ADDED DATA DOC 51967912.pdf
PDF 110 KB Posted
- Attached to
- COVERALLS Federal contract opportunity
- Solicitation number
- SPMYM225Q2287
About this file
This document is a detailed specification for FME (Flame Resistant Environmentally Protective) Coveralls, outlining precise manufacturing requirements for a military procurement. The coveralls are to be a one-piece medium green garment constructed from a 65% polyester and 35% cotton blend, weighing 5.5 to 8 ounces, with specific design features including a full 4-1/2 inch collar, a single left chest pocket, Velcro fasteners at critical points, and an elastic foot stirrup. Size ranges from Medium to XXXL, with precise chest, leg inseam, and sleeve inseam measurements and tolerances specified, ensuring consistent product quality.
The specification mandates high-quality workmanship, requiring coveralls to be free of loose materials, preshrunk, and labeled with the manufacturer's name and identifying number. Each garment must meet strict quality control standards, with the contractor required to submit a certificate of compliance for special instructions with each shipment. This specification appears to support a small business set-aside solicitation by the Defense Logistics Agency Maritime Puget Sound for coveralls to be delivered to the Puget Sound Naval Shipyard, with the procurement following commercial and simplified acquisition procedures.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| ADDED DATA DOC 51967910.pdf | ||
| 25Q2287 COVERALL.pdf | ||
| ADDED DATA DOC 51967909.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
NSN: LLS050137 DOC: 5196-7912
SPECIFICATION FOR FME COVERALLS
1. Style: 1 piece outfit
2. Color: Medium green
3. Material Blend: 65% Polyester and 35% Cotton.
4. Material Weight: 5.5 to 8 ounce preshrunk cotton.
5. Material Weave: Commercial practice similar to two up, one down, right or left twill.
6. Finish: All seams shall be double seams and completely finished.
7. Fasteners: “Velcro” or equal (Hook and pile fastener tape) are required for the following areas:
a. The front of the coveralls.
B. Sealing the pant cuffs
c. Sealing the sleeve cuffs
d. Sealing the top of the pocket
8. Collar: A full collar, 4-1/2 inches plus or minus ½ inch wide.
9. Pocket: A Front pocket on left chest, standard size.
NOTE: No other pockets or through holes
10. Foot stirrup: The pant leg openings shall be finished off with an elastic stirrup. The stirrup shall be attached to each leg opening with a reinforcing box-stitch.
11. Size Dimensions: All dimensions and tolerances are expressed in inches.
Size Med LRG X-LRG XX-LRG XXX-LRG TOLERANCE Chest (a) 46 50 54 60 64 +/- 1 Leg Inseam (b) 30 30 32 32 36 +/- ½ Sleeve Inseam (c) 20 20 20 20 24 +/- 1/2
NOTE: The above measurements shall be taken with the coverall laid out smooth and flat and the neck fully extended.
(a) Chest: Twice the measurement taken across the front at the base of the armholes, from folded edge to folded edge.
(b) Leg Inseam: Measurement shall be taken from the junction of the seams (crotch) along the inseam to the bottom of the coverall.
(c) Sleeve Inseam: Measurement shall be taken from the base of the armhole along the inseam to the bottom edge of the seam.
12. Workmanship: The coveralls shall be free of any loose material such as strings, fibers, unraveling materials, lint, fluff from cloth, or any other particles of size visible to the unaided eye.
13. Special instructions: All coveralls shall be preshrunk prior to receipt by the government.
14. Markings: Coveralls shall be labeled in permanent and visible manner with the manufacturer’s name and identifying number.
15. Responsibility for Compliance: The contractor shall meet all the requirements of the referenced document unless otherwise excluded, amended, modified, or qualified in this document or applicable purchase document shall be meet. A certificate of compliance shall be submitted for the following requirement with each shipment:
i. Item (13) Special Instructions
File details come from the government source that posted it. Updated .