A06 - 140L1721Q0009 -Section 02223_1.pdf

SITE DEMOLITION

Canyon Pintado Fence Improvements

02223 - 1

SECTION 02223

PART 1: GENERAL

1.1 SUMMARY

A. Section Includes: The removal and disposal of wood poles in an existing wood post and pole fence, and the removal of a section of barbed wire fencing including removal of line posts, wire, hardware, and associated materials.

1.3 PROJECT/SITE CONDITIONS

A. Work Limits: Shall be determined by the Contracting Officers Representative.

PART 2: PRODUCTS

(There are no applicable requirements.)

PART 3: EXECUTION

3.1 PREPARATION:

A. Landscape Preservation: Protect vegetation that is outside the work limits from injury.

B. Protection: Protect items not designated for removal from damage. Damage items shall be repaired or replaced at the Contractor's expense.

3.2 DEMOLITION/SCARIFY

A. General: Remove all wood poles and hardware from the post and pole fencing and remove the barbed wire fencing and all items associated the fence.

Remove and salvage the rebar drainage fence for re-installation within the new fence.

B. Wood Pole Fences: Approximate quantities of wood poles to be removed shall be identical to the estimated quantities of new post/poles installed.

Approximate quantities and measurements are shown on the drawings.

C. Barbed Wire Fence: Approximate length of barbed wire fence to be removed is 550 linear feet.

D. Scarify Existing Trail Section: Scarify a section of earthen trail as shown on the drawings. Scarify by breaking up the top 2”-3” of soils within the visible trail and blending the scarified trail to match existing adjacent slopes and grades as directed by the Contracting Officer. The estimated quantity of trail section to be scarified is 200 linear feet x 4 feet wide.

Location to be scarified are shown on the “E. 4 Mile-East Side Satellite View”.

Canyon Pintado Fence Improvements

02223 - 2

3.3 BURNING

A. The burning of materials onsite shall not be allowed.

3.4 DISPOSAL OF DEBRIS

A. Requirements: Items or debris not designated as salvage for the Government shall become the property of the Contractor. Remove and dispose of such materials in a legal manner.

3.5 BACKFILLING

A. General: Fill cavities caused from post removal if applicable.

PART 4: MEASUREMENT AND PAYMENT

4.1 METHOD OF MEASUREMENT

A. Units: The work described in this section will not be measured for payment.

4.2 BASIS OF PAYMENT

A. Payment: No direct payment for the work described under this section will be made. Consideration for this item shall be included in the bid price for other items of the Contract

END OF SECTION