A004 DID - CMP.pdf
PDF 97 KB Posted
- Attached to
- B-52 WBSI Federal contract opportunity
- Solicitation number
- SPRHA1-20-R-0005
- Issued by
- Defense Logistics Agency Aviation
About this file
This document contains a Data Item Description (DID) for a Supplier's Configuration Management Plan and information on a related federal contract opportunity for B-52 Wheel & Brake System Improvements.
The DID outlines the required format and content for a Supplier's Configuration Management Plan, including processes and procedures for effective configuration identification, change control, status accounting, and audits of hardware, software, and firmware configurations. It references ISO 10007 guidelines for configuration management.
The related federal contract opportunity is a solicitation from the Defense Logistics Agency Aviation for the B-52 Wheel & Brake System Improvement Program. Offerors are directed to the attached Request for Proposal SPRHA1-20-R-0005 and associated documents for details on the required products and services.
View the file
Other files for this federal contract opportunity
Show all 50
B-52 WBSI has more files on GovTribe.
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DATA ITEM DESCRIPTION
Title: SUPPLIER’S CONFIGURATION MANAGEMENT PLAN
Number: DI-SESS-80858C Approval Date: 20150407
AMSC Number: N9525 Limitation: N/A
DTIC Applicable: No GIDEP Applicable: No
Preparing Activity: NM Project Number: SESS-2015-015
Applicable Forms: N/A
Use/relationship: The Supplier’s Configuration Management (CM) Plan describes the organization, procedures, and controls of the Supplier’s CM program. The principle use is to provide the Government a basis for review, evaluation, and monitoring of the CM program and associated proposed components.
a. This DID contains the format, content, and intended use information for the data deliverable resulting from the work task described in paragraph 3.1.2 (1) of EIA-649-1 and the principles of EIA-649.
b. This DID supersedes DI-CMAN-80858B and DI-SESS-81875.
c. Copies of these standards are available online at http://www.sae.org or from SAE International, 400
Commonwealth Drive, Warrendale, PA 15096-0001, Tel 877-606-7323 (inside USA and Canada) or 724-776-4970
(outside USA).
d. Copies of ISO 10007 are available online at www.iso.org.
Requirements:
1. Reference Documents. The applicable issue of the documents cited herein, including their approval dates and dates of any applicable amendments, notices, and revisions, shall be as specified in the contract.
2. Format. The Supplier’s CM Plan shall be prepared in Supplier format.
3. Content. The CM plan shall identify the Supplier’s processes and procedures for:
a. Effective configuration identification.
b. Change control.
c. Status accounting.
d. Audits of the total configuration, including hardware, software, and firmware.
3.1 The following reference may be useful in defining content: ISO 10007, Quality management systems –
Guidelines for configuration management.
End of DI-SESS-80858C
Source: http://assist.dla.mil -- Downloaded: 2019-08-30T16:47Z Check the source to verify that this is the current version before use.
http://www.sae.org/ http://www.iso.org/
File details come from the government source that posted it. Updated .