Invitation_For_Bid_-.pdf

PDF 765 KB Posted

Attached to
REPLACE POTABLE WATER MAIN VALVES AT BASE SEATTLE, SEATTLE, WA
Solicitation number
70Z08818BPQQ00400
Issued by

About this file

IFB

View the file

Other files

File Type Posted
ABSTRACT.pdf PDF
Amendment_0001.pdf PDF
20180321_120541.jpg JPG image
Site_Visit_ROSTER.pdf PDF
20180321_120718.jpg JPG image
CONTRACTORS_REQUEST_FOR_CLARIFICATION.docx DOCX document
Cert_of_Authotization_to_Bind_Corp.pdf PDF
70Z08819BPQQ00400_-_WAGE_DETERMINATION.pdf PDF
9974140_Base_Seattle_Replace_PW_C2.pdf PDF
9974140_Base_Seattle_Replace_PW_Main_Valves-SOW.pdf PDF
Contractor_Responsibility_Questionair_-_New.rtf RTF text file
9974140_Base_Seattle_Replace_PW_C1.pdf PDF
Show all 12

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

Table of Contents

PART I – THE SCHEDULE

SECTION A – STANDARD FORM 1442 …………………………………………………………………………….1

SECTION B - SCHEDULE OF PRICES …………………………………………………………………………….5

SECTION C - DESCRIPTION/SPECIFICATIONS/WORK STATEMENT …………………………………………….7

SECTION D - PACKAGING AND MARKING …………………………………………………………………….8

SECTION E - INSPECTION AND ACCEPTANCE CONSTRUCTION …………………………………………….9

SECTION F - DELIVERIES AND PERFORMANCE …………………………………………………………….10

SECTION G - CONTRACT ADMINISTRATION DATA …………………………………………………………….11

PART II - CONTRACT CLAUSE

SECTION H - SPECIAL CONTRACT REQUIREMENTS …………………………………………………………..15

PART III - LIST OF DOCUMENTS.EXHIBITS AND OTHER ATTACHMENTS

SECTION I - CONTRACT CLAUSES …………………………………………………………………………..16

SECTION J - LIST OF ATTACHMENTS …………………………………………………………………………..30

PART IV - REPRESENTATION AND INSTRUCTIONS

SECTION K - REPRESENTATIONS, CERTIFICATIONS AND OTHER STATEMENTS OF OFFERORS ………...….31

SECTION L - INSTRUCTIONS, CONDITIONS, AND NOTICES TO OFFERORS ……………………………………...39

SECTION M - EVALUATION FACTORS FOR AWARD ………………………………………………………………...46

PLEASE MAIL YOUR BID TO THE FOLLOWING ADDRESS:

CONTRACTING OFFICER

Attn: Travis Cohen

IFB 70Z08819BPQQ00400

USCG Civil Engineering Unit

1301 Clay Street 7th Floor, Suite 700N

Oakland, CA 94612-5203

Please do not call to inquire about the status of your bid, as this information will not be released.

NOTICE FOR FILING AGENCY PROTESTS

United States Coast Guard Ombudsman Program

It is the policy of the Coast Guard to issue solicitations and make contract awards in a fair and timely manner. The

Ombudsman Program for Agency Protests (OPAP) was established to investigate agency protest issues and resolve them without expensive and time-consuming litigation. OPAP is an independent reviewing authority that is empowered to grant a prevailing protester essentially the same relief as the General Accounting Office (GAO).

Interested parties are encouraged to seek resolution of their concerns within USCG as an Alternative Dispute Resolution

(ADR) forum, rather than filing a protest with the GAO or some external forum. Interested parties may seek resolution of their concerns informally or opt to file a formal agency protest with the Contracting Officer or Ombudsman.

Informal forum with the Ombudsman. Interested parties who believe a specific USCG procurement is unfair or otherwise defective should first direct their concerns to the applicable Contracting Officer. If the Contracting Officer is unable to satisfy the concerns, the interested parties are encouraged to contact the U.S. Coast Guard Ombudsman for

Agency Protests. Under this informal process, the agency is not required to suspend contract award performance. Use of an informal forum does not suspend any time requirement for filing a protest with the agency or other forum. In order to ensure a timely response, interested parties should provide the following information to the Ombudsman:

solicitation/contract number, contracting office, Contracting Officer, and solicitation closing date (if applicable).

Formal Agency Protest with the Ombudsman. Prior to submitting a formal agency protest, protesters must first use their best efforts to resolve their concerns with the Contracting Officer through open and frank discussions. If the protester’s concerns are unresolved, an independent review is available by the Ombudsman. The protester may file a formal agency protest either to the Contracting Officer or as an alternative to that, the Ombudsman under the OPAP program. Contract award or performance will be suspended during the protest period unless contract award or performance is justified, in writing, for urgent and compelling reasons or is determined in writing to be in the best interest of the Government. The agency’s goal is to resolve protests in less than 35 calendar days from the date of filing.

Protests shall include the information set forth at FAR 33.103(d)(2). If the protester fails to submit the required information, resolution of the protest may be delayed or the protest may be dismissed. To be timely, protests must be filed within the period specified in FAR 33.103(e). Formal protests filed under the OPAP program should be submitted electronically to OPAP@uscg.mil and the Contracting Officer or by hand delivery to the Contracting Officer.

Election of Forum. After an interested party protests a Coast Guard procurement to the Contracting Officer or the Ombudsman, and while the protest is pending, the protestor agrees not to file a protest with the GAO or other external forum. If the protest is file with an external forum, the agency protest will be dismissed.

The Ombudsman Hotline telephone number is 202.372.3695.

mailto:OPAP@uscg.mil

X

X

X

X

X

X

X

X

X

SOLICITATION, OFFER,

AND AWARD

(Construction, Alteration, or Repair)

1. SOLICITATION NUMBER

70Z08819BPQQ00400

2. TYPE OF SOLICITATION

SEALED BID (IFB)

NEGOTIATED (RFP)

3. DATE ISSUED

February 22, 2019

PAGE

IMPORTANT - The "offer" section on the reverse must be fully completed by offeror.

4. CONTRACT NUMBER 5. REQUISITION/PURCHASE REQUEST NUMBER

21-19-889PQQ004

6. PROJECT NUMBER

9974140

7. ISSUED BY CODE 8. ADDRESS OFFER TO

SEE BLOCK 7

United States Coast Guard

Civil Engineering Unit

1301 Clay Street, 7th Floor, Suite 700N

Oakland CA 94612-5203

9. FOR INFORMATION

CALL:

a. NAME

Travis Cohen

b. TELEPHONE NUMBER (Include area code) (NO COLLECT CALLS)

510-637-5587

SOLICITATION

NOTE: In sealed bid solicitations "offer" and "offeror" mean "bid and "bidder".

10. THE GOVERNMENT REQUIRES PERFORMANCE OF THE WORK DESCRIBED IN THESE DOCUMENTS (Title, identifying number, date)

Project Description: - Replace Potable Water Main Valves at Base Seattle, Seattle, Washington as defined on the Specification and Drawings.

The Project is 100% set-aside to Small Business.

It will be issued as an Invitation For Bid (IFB) which will result in the award of a single Firm-Fixed Price (FFP) contract.

The North American Industry Classification System (NAICS) code applicable to this acquisition is 236220.

The magnitude of construction is between $250,000.00 and $500,000.00

Bidders will acknowledge all amendments, sign block 20B and fill-in all information in blocks 14-20C on page 2 of this form. Bidders will also fill-in all items in the bid schedule.

All questions pertaining to this solicitation must be submitted in writing to Travis Cohen at the address in block #7 or email to

Travis.Cohen@uscg.mil . Please use the attached “Request for Clarification” form for this purpose. (See Section J of this solicitation.)

11. The contractor shall begin performance within calendar days and complete it within 80 calendar days after receiving

Award

Notice to proceed. This performance period is mandatory negotiable.

(See ).

12a. THE CONTRACTOR MUST FURNISH ANY REQUIRED PERFORMANCE AND PAYMENT BONDS?

(If "YES", indicate within how many calendar days after award in Item 12b.)

YES NO

13. ADDITIONAL SOLICITATION REQUIREMENTS:

12b. CALENDAR DAYS

a. Sealed offers in original and 0 copies to perform the work required are due at the place specified in Item 8 by 1:00 P.M.PDT

(hour) local time March 27, 2019 (date). If this is a sealed bid solicitation, offers will be publicly opened at that time.

Sealed envelopes containing offers shall be marked to show the offeror's name and address, the solicitation number, and the date and time offers are due.

b. An offer guarantee is, is not required.

c. All offers are subject to the (1) work requirements, and (2) other provisions and clauses incorporated in the solicitation in full text or by reference.

d. Offers providing less than 120 calendar days for Government acceptance after the date offers are due will not be considered and will be rejected.

STANDARD FORM 1442 (REV. 8/2014) prescribed by GSA - FAR (48 CFR) 53.236-1(d) mailto:Travis.Cohen@uscg.mil

AMOUNTS

OFFER (Must be fully completed by offeror)

14. NAME AND ADDRESS OF OFFEROR (Include ZIP Code) 15. TELEPHONE NUMBER (Include area code)

16. REMITTANCE ADDRESS (Include only if different than Item 14.)

CODE FACILITY CODE

17. The offeror agrees to perform the work required at the prices specified below in strict accordance with the terms of this solicitation, if this offer is accepted by the Government in writing within calendar days after the date offers are due. (Insert any number equal to or greater than the minimum requirement stated in Item 13d. Failure to insert any number means the offeror accepts the minimum in Item 13d.)

18. The offeror agrees to furnish any required performance and payment bonds.

19. ACKNOWLEDGMENT OF AMENDMENTS

(The offeror acknowledges receipt of amendments to the solicitation -- give number and date of each)

AMENDMENT

NUMBER

DATE.

20a. NAME AND TITLE OF PERSON AUTHORIZED TO SIGN OFFER (Type or print) 20b. SIGNATURE 20c. OFFER DATE

21. ITEMS ACCEPTED:

AWARD (To be completed by Government)

CONTRACTING OFFICER WILL COMPLETE ITEM 28 OR 29 AS APPLICABLE

STANDARD FORM 1442 (REV. 8/2014) BACK

Prescribed by GSA - FAR (48 CFR) 53.236-1(d)

28. NEGOTIATED AGREEMENT (Contractor is required to sign this document and return copies to issuing office.) Contractor agrees to furnish and deliver all items or perform all work requirements identified on this form and any continuation sheets for the consideration stated in this contract. The rights and obligations of the parties to this contract shall be governed by (a) this contract award, (b) the solicitation, and (c) the clauses, representations, certifications, and specifications incorporated by reference in or attached to this contract.

29. AWARD (Contractor is not required to sign this document.) Your offer on this solicitation is hereby accepted as to the items listed. This award consummates the contract, which consists of (a) the Government solicitation and your offer, and (b) this contract award. No further contractual document is necessary.

30a. NAME AND TITLE OF CONTRACTOR OR PERSON AUTHORIZED TO SIGN

(Type or print) 31a. NAME OF CONTRACTING OFFICER (Type or print)

30b. SIGNATURE 30c. DATE 31b. UNITED STATES OF AMERICA

BY

31c. DATE

22. AMOUNT 23. ACCOUNTING AND APPROPRIATION DATA

24. SUBMIT INVOICES TO ADDRESS SHOWN IN

(4 copies unless otherwise specified)

ITEM 7 25. OTHER THAN FULL AND OPEN COMPETITION PURSUANT TO

10 U.S.C. 2304(c) ( ) 41 U.S.C. 3304(a) ( )

26. ADMINISTERED BY 27. PAYMENT WILL BE MADE BY

Commanding Officer (1224)

USCG Finance Center

1430A Kristina Way

Chesapeake, VA 23326-1224

(757)523-6940

SEE BLOCK 7

Contract Number: 70Z08819CPQQ00400

CTION A – STANDARD FORM 1442

SECTION B - SCHEDULE OF PRICES

THE CONTRACTOR SHALL FURNISH ALL PARTS, LABOR, MATERIAL,

EQUIPMENT, ETC., NECESSARY TO PERFORM ALL WORK IN STRICT

ACCORDANCE WITH THE TERMS AND CONDITIONS SET FORTH IN THE

CONTRACT TO INCLUDE ALL ATTACHMENTS THERETO.

BASE CLIN 001A: Provide all labor, materials, equipment, tools, appurtenances, transportation, supervision, and test services necessary to replace valves and backflow prevention assemblies at

Base Seattle, Seattle, Washington State.

BASE CLIN 0001:$__________________________

Option 0002A: Provide all labor, materials, equipment, tools, appurtenances, transportation, supervision, traffic control, field investigation, and test services necessary to determine potable water cross connection location between existing 4-inch and 6-inch underground potable water pipes to Building 3.

OPTION 0002A:$__________________________

Option 0002B: Provide all labor, materials, equipment, tools, appurtenances, transportation, supervision, field investigation, traffic control, and test services necessary to design and install a new indoor; aboveground; vertical-mounted 4-inch double check valve assembly, gate valves inlet strainer, piping, fittings, trenching, and hot-tap cross connections in gym area of Building 3 as indicated on plan. Contractor shall provide traffic control plan along with traffic controller on site during construction.

OPTION 0002B:$__________________________

UNIT PRICE LINE ITEMS (UPLI):

CLIN 0003A: 2-inch reduced pressure zone assembly

Estimated Qty UNIT Unit Cost Total Cost

1 EA $ $______________

CLIN 0003B: 2-1/2-inch reduced pressure zone assembly

1 EA $ $______________

CLIN 0003C: Dispose contaminated soil and backfill fresh and clean soil

1 CY $______________

Total for all UPLI $________________

TOTAL FOR ALL CLINS: $_______________________________________

A. Contract Line Item Numbers (CLINs) covered by this solicitation are divided into three categories designated as Base CLIN, Option CLINs, and Unit Price Line Item CLINs .

1. CLIN 0001 is the Base CLIN. This CLIN, if there is an award, will be awarded.

2. CLIN 0002A – is an Option Item CLIN. This Optional CLIN relates to the work described in the Specifications identified by the following project number and name. PSN:

9974140. Determine potable water cross connection location between existing 4-inch and 6-inch underground potable water pipes to Building 3. The exercise and award of the Option

CLIN will be made within 60 days of the award of the Base CLIN. Award of the Option

CLIN will be dependent on the availability of funds. The Government reserves the right to award or not award this Option CLIN.

3. CLIN 0002B – is an Option Item CLIN. This Optional CLIN relates to the work described in the Specifications identified by the following project number and name.PSN:

9974140. Design and install a new indoor; aboveground; vertical-mounted 4-inch double check valve assembly, gate valves inlet strainer, piping, fittings, trenching, and hot-tap cross connections in gym area of Building 3. The exercise and award of the Option CLIN will be made within 60 days of the award of the Base CLIN. Award of the Option CLIN will be dependent on the availability of funds. The Government reserves the right to award or not award this Option CLIN

4. CLIN 0003A-0003C are the Unit Priced Line Item CLINs.

i. Unit Price Line Item: This is an item of work of such nature that definite need or amount cannot be determined until other work is accomplished. The unit price line item shall be activated and added by modification to the contract only when directed by the Contracting

Officer.

ii. The unit price line item work will be paid for actual amounts ordered at the applicable unit prices, therefore, you must include the total price (material, labor, overhead, and profit) associated with unit price line items as no adjustments will be made later.

iii. The estimated quantity shown for the unit price line item is a Government Estimate, and will not be awarded, unless needed, but will be used for evaluation purposes.

B. Prices must be submitted on Base, Option, and Unit Priced Line Item CLINs. Failure to do so may result in rejection of the proposal.

C. The Contractor's proposal shall be all-inclusive to provide all labor, material, equipment, transportation, supervision, and all other necessary items for a complete and usable project

SECTION C - DESCRIPTION/SPECIFICATIONS/WORK STATEMENT

DRAWINGS AND SPECIFICATIONS

The following specifications and drawings apply to this contract and provided as a separate attachment.

The following drawings and specifications are applicable to this acquisition:

(a) Specifications for Replace Potable Water Main Valves; 61 pages

(b) Davis Bacon Wage Rates: 19 pages, King County

(c) reference drawings, 2 sheets

SECTION D - PACKAGING AND MARKING

D.1 - PACKAGING AND MARKING

(a) All shipments of materials, equipment and/or supplies to the project site shall be addressed to the Contractor and not the U.S. Government. Preservation, packaging and packing shall be in accordance with standard practices for commercial packaging.

(b) Government personnel are not authorized to accept deliveries for the contractor, nor are they responsible for off-loading shipments. A contractor representative must be present to accept deliveries.

SECTION E - INSPECTION AND ACCEPTANCE CONSTRUCTION

E.1 52.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1998)

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at these addresses:

https://www.acquisition.gov/ ;

52.246-12 INSPECTION OF CONSTRUCTION (AUG 1996)

E.2 DAILY REPORTING REQUIREMENT

The Contractor shall prepare and file a "Contractor's Daily Report", for each day of contract performance. Description must include contract number and work being performed. These reports shall be delivered to, or if directed, mailed to the Construction Manager on Fridays. The daily report shall include the name of Contractors and Subcontractors on-site, the number of workers and their labor categories employed on-site, the work being performed, the type of equipment on-site, any change order work being performed, and whether the work being performed is on schedule. Reports shall be numbered, dated and signed by the Contractor or his

Project Manager. Failure to submit the daily reports could result in payments being withheld until all daily reports are current.

E.3 FINAL INSPECTION

Final inspection, punch list, submission of all submittals, acceptance, and cleanup of the project site under conditions defined in Specification will be completed before the completion date.

https://www.acquisition.gov/

SECTION F - DELIVERIES AND PERFORMANCE

F.1 52.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1998)

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at these addresses:

https://www.acquisition.gov/ ;

52.211-10 COMMENCEMENT, PROSECUTION AND COMPLETION

OF WORK (APR 1984) [(a) 10 days, (c) 80 Days after Notice to Proceed.

52.211-18 VARIATION IN ESTIMATED QUANTITY (APR 1984)

52.242-14 SUSPENSION OF WORK (APR 1984)

SECTION G - CONTRACT ADMINISTRATION DATA

G.1 INSTRUCTIONS FOR SUBMITTING MATERIAL APPROVALS

Submittals must be provided in sufficient time and in such sequence to avoid delays in the work.

Test reports and certifications shall be submitted and approved prior to payment for the applicable item. Corrected O&M Manuals must be received by the Government prior to the Final Inspection.

Materials, samples, drawings, etc., shall be submitted on the Government provided form.

G.2 AUTHORIZED REPRESENTATIVES OF THE CONTRACTING OFFICER

The Contracting Officer's Representative (COR) is the representative of the Contracting Officer for the purpose of day to day technical administration/inspection of all work under the contract.

This includes, but is not limited to, approval of progress payments, approval of submittals, final inspection and providing technical assistance when required. The contractor is cautioned that in no instance is the COR authorized to approve any changes that will involve the quantity, quality, price or performance of the contract.

G.3 ADDRESS OF CORRESPONDENCE

All correspondence, unless otherwise specified, shall be directed to the following address:

U.S Coast Guard

Civil Engineering Unit-Oakland

1301 Clay Street 7th Floor, Suite 700N

Oakland, California 94612-5203

Telephone Number: (510) 637-5587

NOTE: Include Contract Number on all correspondence.

G.4 REQUIREMENT FOR INSURANCE

The contractor shall provide and maintain insurance for the entire contract performance, in accordance with Federal Acquisition Regulation Clause No. 52.228-5, entitled “INSURANCE -

WORK ON A GOVERNMENT INSTALLATION”. (See Section I) FAR 28.307-2 states the following minimum amounts of liability:

(a) Workers’ Compensation and Employer’s Liability. Contractor shall comply with applicable

Federal and State worker’s compensation and occupational disease statutes. If occupational diseases are not compensable under those statutes, they shall be covered under the employer’s liability section of the insurance policy, except when contract operations are so commingled with a contractor’s commercial operations that it would not be practical to require this coverage.

Employer’s liability coverage of at least $100,000 shall be required, except in States with exclusive or monopolistic funds that do not permit workers’ compensation to be written by private carriers. (See 28.305(c) for treatment of contracts subject to the Defense Base Act.)

(b) General Liability. (1) The contractor shall provide bodily injury liability insurance coverage written on the comprehensive form of policy of at least $500,000 per occurrence.

(2) Property damage liability insurance shall be required only in special circumstances as determined by the agency.

(c) Automobile Liability. The contractor shall provide automobile liability insurance written on the comprehensive form of policy. The policy shall provide for bodily injury and property damage liability covering the operation of all automobiles used in connection with performing the contract. Policies covering automobiles operated in the United States shall provide coverage of at least $200,000 per person and $500,000 per occurrence for bodily injury and $20,000 per occurrence for property damage. The amount of liability coverage on other policies shall be commensurate with any legal requirements of the locality and sufficient to meet normal and customary claims.

(d) Vessel Liability. When contract performance involves use of vessels, the contractor shall provide vessel collision liability, protection, and indemnity liability insurance.

(e) Prior to commencement of work, the contractor shall furnish to the Contracting Officer a certificate or written statement of the above required insurance. The policies evidencing required insurance shall contain an endorsement to the effect that cancellation or any material change in the policies adversely affecting the interests of the Government in such insurance shall not be effective until thirty (30) days after written notice thereof to the Contracting Officer. The contractor agrees to insert the substance of this clause, including this paragraph, in all subcontracts hereunder.

(f) Longshore and Harbor Workers Compensation Act applies to the procurement. In addition to other insurance coverage required, full insurance coverage is required in accordance with the U.S.

Longshore and Harbor Workers Compensation Act, 33 USC 901 et seq.

G.5 INVOICING REQUIREMENTS

The original invoice/progress payment is to be submitted directly to billing address located on the contract.

(a) Invoices shall be prepared and submitted in accordance with the provisions of FAR Clause

52.232-27, Prompt Payment for Construction Contracts (OCT 2008). Instructions can be found in

Section I, Contract Clauses.

(b) Each invoice shall contain the following information:

(1) Contract Number

(2) Name of the Contract Specialist or Contracting Officer

(3) Invoice Routing Code (IRC) assigned by the Coast Guard

(4) Annotate on the invoice indicating that the contractor represents a small business for accelerated payment purposes.

(c) The Coast Guard unique Invoice Routing Code (IRC) for this contract is: CEU-OAK

(Contracting Officer insert applicable Invoice Routing Code (IRC) here from the list provided in

Enclosure 1 (e.g. PCB-1, CG-9121, etc.) or as specified here:

http://cgweb.fincen.uscg.mil/centralinv/ under “WINS Remote Site Invoice Routing Code (IRC)

Lookup”)

(d) Each invoice must be submitted to the designated billing office via one of the following modes, listed in descending order of preference:

(1) FINCEN Website invoice receipt form:

http://www.fincen.uscg.mil/centralinv/central_inv_contr.cfm

(2) Mailed to: Commercial Invoices

U.S. Coast Guard Finance Center

1430A Kristina Way

Chesapeake, VA 23326

(e) To facilitate processing, all proper invoices and any supporting information submitted electronically using the FINCEN web based invoice submission capability must be submitted as a single Adobe .pdf formatted file, or as otherwise specified in the contract.

(f) Supporting documentation along with a courtesy copy of the invoice may also be e-mailed to the Contract Specialist at the addresses cited below:

TRAVIS.COHEN@uscg.mil

(g) In accordance with the Prompt Payment Act, for the purposes of determining a payment due date and the date on which interest will begin to accrue if a payment is late, a proper invoice shall be deemed to have been received:

(1) On the later of:

(i) For invoices that are mailed or transmitted via facsimile, the date a proper invoice is actually received by the designated billing office and annotates the http://cgweb.fincen.uscg.mil/centralinv/ http://www.fincen.uscg.mil/centralinv/central_inv_contr.cfm mailto:TRAVIS.COHEN@uscg.mil invoice with date of receipt at the time of receipt.

(ii) For invoices electronically transmitted by the contractor via web based submission, the date a transmission is received by the designated billing office, and receipt confirmation is provided to the designated recipient; or

(ii) The seventh day after the date on which the property is actually delivered or performance of the services is actually completed; unless—

a) The agency has actually accepted the property or services before the seventh day in which case the acceptance date shall substitute for the seventh day after the delivery date; or

b) A longer acceptance period is specified in the contract, in which case the date of actual acceptance or the date on which such longer acceptance period ends shall substitute for the seventh day after the delivery date;

(2) On the date placed on the invoice by the contractor, when the agency fails to annotate the invoice with date of receipt of the invoice at the time of receipt (such invoice must be a proper invoice); or

(3) On the date of delivery, when the contract specifies that the delivery ticket may serve as an invoice.

(4) Web based submission by the contractor and receipt confirmation does not reflect Government review or acceptance of the invoice.

(5) Payment inquiries and status may be obtained - at the following website: -https://www.fincen.uscg.mil/secure/payment.htm.

G.6 METHOD OF PAYMENT

In accordance with FAR Clause 52.232-33, Payment by Electronic Funds Transfer-- System for

Award Management (Jul. 2013), as contained in Section I, Contract Clauses, the Government shall make payment to the Contractor using the EFT information contained in the System for

Award Management (SAM) database. In the event that the EFT information changes, the

Contractor shall be responsible for providing the updated information to the SAM database. The

Government may make payment by EFT through either the Automated Clearing House (ACH) network, subject to the rules of the National Automated Clearing House Association, or the

Fedwire Transfer System. The rules government federal payments through the ACH are contained in 31 CFR parts 210.

For Registration Assistance: SAM Customer Service Information

Federal Service Desk: www.fsd.gov

Toll-Free Phone Number 866-606-8220 http://www.fincen.uscg.mil/electron.htm http://www.fincen.uscg.mil/electron.htm

Outside U.S.: 334-206-7828

Website: http://www.sam.gov/index.html/#1

G.7 CERTIFICATION OF PAYMENTS-RELEASE OF CLAIM

The Contractor, prior to receiving a progress or final payment under this contract, shall submit to the Contracting Officer a certification that the contractor has made payment from proceeds of prior payments, or that he will make timely payment from the proceeds of the progress or final payment then due him, to his subcontractors and suppliers in accordance with his contractual arrangements. The Contractor shall submit to the Contracting Officer, together with his request for final payment, a properly executed Contractor’s Release, DHS Form 700-03. Failure to submit this completed release shall result in delay of final payment.

SECTION H - SPECIAL CONTRACT REQUIREMENTS

H.1 PRICING OF REQUEST FOR EQUITABLE ADJUSTMENT

When costs are a factor in any determination of a contract price adjustment pursuant to the

Changes Clause or any other provision of this contract, such costs shall be in accordance with the contract cost principles and procedures in Part 31 of the Federal Acquisition Regulations, as applicable, which are in effect on the date of this contract.

H.2 CONTRACTOR INITIATED CHANGES

Contractor initiated requests for changes to the contract will be considered by the Government only if they meet all of the following conditions:

(a) The request shall be submitted to the Contracting Officer by separate correspondence signed by your authorized representative.

(b) The request shall state how the proposed change would be incorporated into the construction schedule, whether or not a time extension will be necessary, and the calendar date by which you must receive approval or disapproval so as not to affect the existing schedule.

(c) The request shall include a complete listing of labor, materials and equipment costs, and proposed changes to the original contract requirements as well as all indirect costs, and delays. It shall include a listing, with telephone numbers of all sources necessary for

Government verification of proposed costs and your offer.

(d) Cost and pricing information shall be submitted according to the provisions of H.1 above.

THE GOVERNMENT MAY REJECT ANY REQUEST THAT DOES NOT PROVIDE

ALL OF THE ABOVE INFORMATION IN A SINGLE SUBMISSION.

H.3 SUBCONTRACT DATA

The Contractor shall submit an executed Statement and Acknowledgment Standard Form 1413, to the Contracting Officer for every subcontractor (including every subcontractor of the second or lower tier) that will be performing work at the construction site. This shall be done before the subcontractor begins work. This form provides an acknowledgment by the subcontractor that mandatory "flow-down" contract clauses have been included in this contract in accordance with

FAR Clause 52.222-11. Completing this form creates no contractual relationship between subcontractors and the Government.

H.4 SUPERINTENDENCE BY CONTRACTOR.

The contractor shall directly oversee all work or have on the worksite a competent superintendent who is satisfactory to the Contracting Officer and who has authority to act for the contractor. The superintendent cannot be designated for more than one contract while on site work is being performed. (The superintendent and alternate shall be an employee of the prime contractor).

SECTION I - CONTRACT CLAUSES

I.1 52.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1998)

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these addresses:

52.202-1 DEFINITIONS (NOV 2013)

52.203-3 GRATUITIES (APR 1984)

52.203-5 COVENANT AGAINST CONTINGENT FEES (MAY 2014)

52.203-7 ANTI-KICKBACK PROCEDURES (MAY 2014)

52.203-8 CANCELLATION, RESCISSION, AND RECOVERY OF FUNDS FOR

ILLEGAL OR IMPROPER ACTIVITY (MAY 2014)

52.203-10 PRICE OR FEE ADJUSTMENT FOR ILLEGAL OR IMPROPER ACTIVITY

(MAY 2014)

52.203-12 LIMITATION ON PAYMENTS TO INFLUENCE CERTAIN FEDERAL

TRANSACTIONS (OCT 2010)

52.203-13 CONTRACTOR CODE OF BUSINESS ETHICS AND CONDUCT (OCT 2015)

52.203-14 DISPLAY OF HOTLINE POSTER(S) (OCT 2015)

52.203-17 CONTRACTOR EMPLOYEE WHISTLEBLOWER RIGHTS AND

REQUIREMENT TO INFORM EMPLOYEES OF WHISTLEBLOWER

RIGHTS.

52.204-4 PRINTED OR COPIED DOUBLE-SIDED ON RECYCLED PAPER (MAY

2011)

52.204-7 SYSTEM FOR AWARD MANAGEMENT (OCT 2016)

52.204-9 PERSONAL IDENTITY VERIFICATION OF CONTRACTOR PERSONNEL

(JAN 2011)

52.204-10 REPORTING EXECUTIVE COMPENSATION AND FIRST-TIER

SUBCONTRACT AWARDS (OCT 2016)

52.209-6.1 PROTECTING THE GOVERNMENT'S INTEREST WHEN

SUBCONTRACTING

WITH CONTRACTORS DEBARRED, SUSPENDED, OR PROPOSED FOR

DEBARMENT (OCT 2015)

52.209-7 INFORMATION REGARDING RESPONSIBILITY MATTERS (Jul 2013)

52.209-10 PROHIBITION ON CONTRACTING WITH INVERTED DOMESTIC

CORPORATIONS (NOV 2015)

52.211-15 DEFENSE PRIORITY AND ALLOCATION REQUIREMENTS (APR 2008)

52.214-26 AUDIT AND RECORDS –SEALED BIDDING (OCT 2010)

52.214-27 PRICE REDUCTION FOR DEFECTIVE CERTIFIED COST OR PRICING

DATA –

MODIFICATIONS – SEALED BIDDING (AUG 2011)

52.214-28 SUBCONTRACT CERTIFIED COST OR PRICING DATA –

MODIFICATIONS

SEALED BIDDING (OCT 2010)

52.214-29 ORDER OF PRECEDENCE – SEALED BIDDING (JAN 1986)

52.217-7 OPTION FOR INCREASED QUANTITY-SEPARTELY PRICED LINE ITEM

(Mar 1989) (60 days of contract award)

52.222-3 CONVICT LABOR (JUNE 2003)

52.222-4 CONTRACT WORK HOURS AND SAFETY STANDARDS - OVERTIME

COMPENSATION (MAY 2014)

52.222-6 CONSTRUCTION WAGE RATE REQUIREMENT (MAY 2014)

52.222-7 WITHHOLDING OF FUNDS (MAY 2014)

52.222-8 PAYROLLS AND BASIC RECORDS (MAY 2014)

52.222-9 APPRENTICES AND TRAINEES (JULY 2005)

52.222-10 COMPLIANCE WITH COPELAND ACT REQUIREMENTS (FEB 1988)

52.222-11 SUBCONTRACTS (LABOR STANDARDS) (MAY 2014)

52.222-12 CONTRACT TERMINATION-DEBARMENT (MAY 2014)

52.222-13 COMPLIANCE WITH CONSTRUCTION WAGE RATE REQUIREMENT

AND RELATED ACT REGULATIONS (MAY 2014)

52.222-14 DISPUTES CONCERNING LABOR STANDARDS (FEB 1988)

52.222-15 CERTIFICATION OF ELIGIBILITY (MAY 2014)

52.222-21 PROHIBITION OF SEGREGATED FACILITES (APR 2015)

52.222-26 EQUAL OPPORTUNITY (SEP 2016)

52.222-27 AFFIRMATIVE ACTION COMPLIANCE REQUIREMENTS FOR

CONSTRUCTION (APR 2015)

52.222-35 EQUAL OPPORTUNITY FOR VETERANS (OCT 2015)

52.222-36 EQUAL OPPORTUNITY FOR WORKERS WITH DISABILITIES (JUL 2014)

52.222-37 EMPLOYMENT REPORTS ON VETERANS (FEB 2016)

52.222-40 NOTIFICATION OF EMPLOYEE RIGHTS UNDER THE NATIONAL

LABOR RELATIONS ACT (DEC 2010)

52.222-41 SERVICE CONTRACT LABOR STANDARDS (MAY 2014)

52.222-50 COMBATING TRAFFICKING IN PERSONS (MAR 2015)

52.222-54 EMPLOYMENT ELIGIBILITY VERIFICATION (OCT 2015)

52.222-55 MINIMUM WAGE UNDER EXECUTIVE ORDER 13658 (DEC 2015)

52.223-2 AFFIRMATIVE PROCUREMENT OF BIOBASED PRODUCTS UNDER

SERVICE AND CONSTRUCTION CONTRACTS (SEP 2013)

52.223-3 HAZARDOUS MATERIAL IDENTIFICATION AND MATERIAL SAFETY

DATA (ALT. I) (JUL 1995)

52.223-5 POLLUTION PREVENTION AND RIGHT-TO-KNOW INFORMATION

(MAY 2011)

52.223-6 DRUG-FREE WORKPLACE (MAY 2001)

52.223-12 REFRIGERATION EQUIPMENT AND AIR CONDITIONERS (JUN 2016)

52.223-15 ENERGY EFFICIENCY IN ENERGY- CONSUMING PRODUCTS (DEC

2007)

52.223-17 AFFIRMATIVE PROCUREMENT OF EPA-DESIGNATED ITEMS IN

SERVICE AND CONSTRUCTION CONTRACTS (MAY 2008)

52.223-18 ENCOURAGING CONTRACTOR POLICIES TO BAN TEXT MESSAGING

WHILE DRIVING (AUG 2011)

52.225-13 RESTRICTIONS ON CERTAIN FOREIGN PURCHASES (JUN 2008)

52.227-1 AUTHORIZATION AND CONSENT (DEC 2007)

52.227-2 NOTICE AND ASSISTANCE REGARDING PATENT & COPYRIGHT

INFRINGEMENT (DEC 2007)

52.227-4 PATENT INDEMNITY - CONSTRUCTION CONTRACTS (DEC 2007)

52.228-1 BID GUARANTEE (SEP 1996)

(C) The amount of the bid guarantee shall be 20% of bid price.

52.228-2 ADDITIONAL BOND SECURITY (OCT 1997)

52.228-5 INSURANCE - WORK ON A GOVERNMENT INSTALLATION (JAN 1997)

52.228-11 PLEDGES OF ASSETS (JAN 2012)

52.228-12 PROSPECTIVE SUBCONTRACTOR REQUESTS FOR BONDS (MAY 2014)

52.228-14 IRREVOCABLE LETTER OF CREDIT (NOV 2014)

52.228-15 PERFORMANCE AND PAYMENT BONDS--CONSTRUCTION (OCT 2010)

52.229-3 FEDERAL, STATE, AND LOCAL TAXES (FEB 2013)

52.232-5 PAYMENTS UNDER FIXED-PRICE CONSTRUCTION CONTRACTS (MAY

2014)

52.232-17 INTEREST (MAY 2014)

52.232-23 ASSIGNMENT OF CLAIMS (MAY 2014)

52.232-27 PROMPT PAYMENT FOR CONSTRUCTION CONTRACTS (JAN 2017)

52.232-33 PAYMENT BY ELECTRONIC FUNDS TRANSFER – SYSTEM FOR

AWARD MANAGEMENT (JUL 2013)

52.232-39 UNENFORCEABILITY OF UNAUTHORIZED OBLIGATIONS (JUN 2013)

52.232-40 PROVIDING ACCELERATED PAYMENT TO SMALL BUSINESS

SUBCONTRACTORS (DEC 2013)

52.233-1 DISPUTES (MAY 2014)

52.233-3 PROTEST AFTER AWARD (AUG 1996)

52.233-4 APPLICABLE LAW FOR BREACH OF CONTRACT CLAIM (OCT 2004)

52.236-2 DIFFERING SITE CONDITIONS (APR 1984)

52.236-3 SITE INVESTIGATION AND CONDITIONS AFFECTING THE WORK (APR

1984)

52.236-5 MATERIAL AND WORKMANSHIP (APR 1984)

52.236-6 SUPERINTENDENCE BY THE CONTRACTOR (APR 1984)

52.236-7 PERMITS AND RESPONSIBILITIES (NOV 1991)

52.236-8 OTHER CONTRACTS (APR 1984)

52.236-9 PROTECTION OF EXISTING VEGETATION, STRUCTURES, EQUIPMENT,

UTILITIES AND IMPROVEMENTS (APR 1984)

52.236-10 OPERATIONS AND STORAGE AREAS (APR 1984)

52.236-11 USE AND POSSESSION PRIOR TO COMPLETION (APR 1984)

52.236-12 CLEANING UP (APR 1984)

52.236-13 ACCIDENT PREVENTION (NOV 1991) ALTERNATE I (NOV 1991)

52.236-14 AVAILABILITY AND USE OF UTILITY SERVICES (APR 1984)

52.236-15 SCHEDULES FOR CONSTRUCTION CONTRACTS (APR 1984)

52.236-16 QUANTITY SURVEYS (APR 1984)

52.236-17 LAYOUT OF WORK (APR 1984)

52.236-21 SPECIFICATIONS AND DRAWINGS FOR CONSTRUCTION (FEB 1997)

ALTERNATE I (APR 1984) (USE IF RECORD AND REPRODUCIBLE SHOP

DRAWINGS ARE REQUIRED) ALTERNATE II (APR 1984) USE IF ONLY

RECORD SHOP DRAWINGS ARE REQUIRED) _3_ SET OF PRINTS

52.236-26 PRECONSTRUCTION CONFERENCE (FEB 1995)

52.237-2 PROTECTION OF GOVERNMENT BUILDINGS, EQUIPMENT, AND

VEGETATION (APR 1984)

52.237-4 PAYMENT BY GOVERNMENT TO CONTRACTOR (APR 1984)

52.237-5 PAYMENT BY CONTRACTOR TO GOVERNMENT (APR 1984)

52.242-13 BANKRUPTCY (JUL 1995)

52.243-4 CHANGES (JUN 2007)

52.244-6 SUBCONTRACTS FOR COMMERCIAL ITEMS (JAN 2017)

52.245-1 GOVERNMENT PROPERTY (APR 2012) ALT. 1 (JAN 2017)

52.245-9 USE AND CHARGES (APR 2012)

52.246-21 WARRANTY OF CONSTRUCTION (MAR 1994) ALTERNATE I (APR 1984)

52.248-3 VALUE ENGINEERING - CONSTRUCTION (OCT 2015)

52.249-1 TERMINATION FOR CONVENIENCE OF THE GOVERNMENT (FIXED-

PRICE)

(SHORT FORM)(APR 1984) – ALTERNATE 1 (APR 1984)

52.249-2 TERMINATION FOR CONVENIENCE OF THE GOVERNMENT (FIXED-

PRICE)

(APR 2012) – ALTERNATE 1 (SEP 1996)

52.249-3 TERMINATION FOR CONVENIENCE OF THE GOVERNMENT

(DISMANTLING,

DEMOLITION, OR REMOVAL OF IMPROVEMENTS (APR 2012)

52.249-10 DEFAULT (FIXED-PRICE CONSTRUCTION) (APR 1984)

52.252-6 AUTHORIZED DEVIATIONS IN CLAUSES (APR 1984)

(a) The use in this solicitation or contract of any Federal Acquisition Regulation

(48 CFR Chapter 1) clause with an authorized deviation is indicated by the addition of “(DEVIATION)” after the date of the clause.

(b) The use in this solicitation or contract of any Federal Acquisition Regulation

(48 CFR Chapter 19) clause with an authorized deviation is indicated by the addition of “(DEVIATION)” after the name of the regulation.

52.253-1 COMPUTER GENERATED FORMS (JAN 1991)

DEPARTMENT OF HOMELAND SECURITY ACQUISITION

REGULATION (HSAR) CLAUSES (48 CFR CHAPTER 30)

3052.211-70 INDEX FOR SPECIFICATIONS (DEC 2003)

3052.222-70 STRIKES OR PICKETING AFFECTING TIMELY COMPLETION OF THE

CONTRACT WORK (DEC 2003)

3052.222-71 STRIKES OR PICKETING AFFECTING ACCESS TO A DHS FACILITY

(DEC 2003)

3052.222-90 LOCAL HIRE (USCG) (JUN 2006)

3052.223-70 REMOVAL OR DISPOSAL OF HAZARDOUS SUBSTANCES-APPLICABLE

LICENSES AND PERMITS (JUN 2006) (30 days)

3052.223-90 ACCIDENT AND FIRE REPORTING (USCG) (DEC 2003)

3052.228-70 INSURANCE (DEC 2003)

3052.228-90 NOTIFICATION OF MILLER ACT PAYMENT BOND PROTECTION (DEC

2003)

3052.242-72 CONTRACTING OFFICER'S TECHNICAL REPRESENTATIVE (DEC 2003)

I.2 52.225-9 -- Buy American–Construction Materials (May 2014)

(a) Definitions. As used in this clause--

“Commercially available off-the-shelf (COTS) item”—

(1) Means any item of supply (including construction material) that is—

(i) A commercial item (as defined in paragraph (1) of the definition at FAR 2.101);

(ii) Sold in substantial quantities in the commercial marketplace; and

(iii) Offered to the Government, under a contract or subcontract at any tier, without modification, in the same form in which it is sold in the commercial marketplace; and

(2) Does not include bulk cargo, as defined in 46 U.S.C. 40102(4), such as agricultural products and petroleum products.

“Component” means an article, material, or supply incorporated directly into a construction material.

“Construction material” means an article, material, or supply brought to the construction site by the Contractor or a subcontractor for incorporation into the building or work. The term also includes an item brought to the site preassembled from articles, materials, or supplies. However, emergency life safety systems, such as emergency lighting, fire alarm, and audio evacuation systems, that are discrete systems incorporated into a public building or work and that are produced as complete systems, are evaluated as a single and distinct construction material regardless of when or how the individual parts or components of those systems are delivered to the construction site. Materials purchased directly by the

Government are supplies, not construction material.

“Cost of components” means--

(1) For components purchased by the Contractor, the acquisition cost, including transportation costs to the place of incorporation into the construction material (whether or not such costs are paid to a domestic firm), and any applicable duty (whether or not a duty-free entry certificate is issued); or

(2) For components manufactured by the Contractor, all costs associated with the manufacture of the component, including transportation costs as described in paragraph (1) of this definition, plus allocable overhead costs, but excluding profit. Cost of components does not include any costs associated with the manufacture of the construction material.

“Domestic construction material” means—

(1) An unmanufactured construction material mined or produced in the United States;

(2) A construction material manufactured in the United States, if—

(i) The cost of its components mined, produced, or manufactured in the United States exceeds 50 percent of the cost of all its components. Components of foreign origin of the same class or kind for which nonavailability determinations have been made are treated as domestic; or

(ii) The construction material is a COTS item.

“Foreign construction material” means a construction material other than a domestic construction material.

“United States” means the 50 States, the District of Columbia, and outlying areas.

(b) Domestic preference.

(1) This clause implements the 41 U.S.C. chapter 83, Buy American, by providing a preference for domestic construction material. In accordance with 41 U.S.C. 1907, the component test of the Buy American statute is waived for construction material that is a

COTS item. (See FAR 12.505(a)(2)). The Contractor shall use only domestic construction material in performing this contract, except as provided in paragraphs (b)(2) and (b)(3) of this clause.

(2) This requirement does not apply to information technology that is a commercial item or to the construction materials or components listed by the Government as follows: ______

[Contracting Officer to list applicable excepted materials or indicate “none”]

(3) The Contracting Officer may add other foreign construction material to the list in paragraph (b)(2) of this clause if the Government determines that

(i) The cost of domestic construction material would be unreasonable. The cost of a particular domestic construction material subject to the requirements of the Buy

American statute is unreasonable when the cost of such material exceeds the cost of foreign material by more than 6 percent;

(ii) The application of the restriction of the Buy American statute to a particular construction material would be impracticable or inconsistent with the public interest; or

(iii) The construction material is not mined, produced, or manufactured in the

United States in sufficient and reasonably available commercial quantities of a satisfactory quality.

(c) Request for determination of inapplicability of the Buy American statute.

(1)

(i) Any Contractor request to use foreign construction material in accordance with paragraph

(b)(3) of this clause shall include adequate information for Government evaluation of the request, including--

(A) A description of the foreign and domestic construction materials;

(B) Unit of measure;

(C) Quantity;

(D) Price;

(E) Time of delivery or availability;

(F) Location of the construction project;

(G) Name and address of the proposed supplier; and

(H) A detailed justification of the reason for use of foreign construction materials cited in accordance with paragraph (b)(3) of this clause.

(ii) A request based on unreasonable cost shall include a reasonable survey of the market and a completed price comparison table in the format in paragraph (d) of this clause.

(iii) The price of construction material shall include all delivery costs to the construction site and any applicable duty (whether or not a duty-free certificate may be issued).

(iv) Any Contractor request for a determination submitted after contract award shall explain why the Contractor could not reasonably foresee the need for such determination and could not have requested the determination before contract award. If the Contractor does not submit a satisfactory explanation, the Contracting Officer need not make a determination.

(2) If the Government determines after contract award that an exception to the Buy American statute applies and the Contracting Officer and the Contractor negotiate adequate consideration, the Contracting Officer will modify the contract to allow use of the foreign construction material.

However, when the basis for the exception is the unreasonable price of a domestic construction material, adequate consideration is not less than the differential established in paragraph (b)(3)(i) of this clause.

(3) Unless the Government determines that an exception to the Buy American statute applies, use of foreign construction material is noncompliant with the Buy American statute.

(d) Data. To permit evaluation of requests under paragraph (c) of this clause based on unreasonable cost, the Contractor shall include the following information and any applicable supporting data based on the survey of suppliers:

Foreign and Domestic Construction Materials Price Comparison

Construction material description Unit of measure Quantity Price (dollars) *

Item 1

Foreign construction material

Domestic construction material

Item 2

[List name, address, telephone number, and contact for suppliers surveyed. Attach copy of response; if oral, attach summary.]

[Include other applicable supporting information.]

[*Include all delivery costs to the construction site and any applicable duty (whether or not a duty-free entry certificate is issued).]

I.3 52.225-11 -- Buy American—Construction Materials under Trade Agreements (OCT

2016)

(a) Definitions. As used in this clause--

“Caribbean Basin country construction material” means a construction material that--

(1) Is wholly the growth, product, or manufacture of a Caribbean Basin country; or

(2) In the case of a construction material that consists in whole or in part of materials from another country, has been substantially transformed in a Caribbean Basin country into a new and different construction material distinct from the materials from which it was transformed.

“Commercially available off-the-shelf (COTS) item”—

(1) Means any item of supply (including construction material) that is—

(i) A commercial item (as defined in paragraph (1) of the definition at FAR 2.101);

(ii) Sold in substantial quantities in the commercial marketplace; and

(iii) Offered to the Government, under a contract or subcontract at any tier, without modification, in the same form in which it is sold in the commercial marketplace;

and

(2) Does not include bulk cargo, as defined in 46 U.S.C. 40102(4), such as agricultural products and petroleum products.

“Component” means an article, material, or supply incorporated directly into a construction material.

“Construction material” means an article, material, or supply brought to the construction site by the Contractor or subcontractor for incorporation into the building or work. The term also includes an item brought to the site preassembled from articles, materials, or supplies. However, emergency life safety systems, such as emergency lighting, fire alarm, and audio evacuation systems, that are discrete systems incorporated into a public building or work and that are produced as complete systems, are evaluated as a single and distinct construction material regardless of when or how the individual parts or components of those systems are delivered to the construction site. Materials purchased directly by the Government are supplies, not construction material.

“Cost of components” means--

(1) For components purchased by the Contractor, the acquisition cost, including transportation costs to the place of incorporation into the construction material (whether or not such costs are paid to a domestic firm), and any applicable duty (whether or not a duty-free entry certificate is issued); or

(2) For components manufactured by the Contractor, all costs associated with the manufacture of the component, including transportation costs as described in paragraph (1) of this definition, plus allocable overhead costs, but excluding profit. Cost of components does not include any costs associated with the manufacture of the construction material.

“Designated country” means any of the following countries:

(1) A World Trade Organization Government Procurement Agreement (WTO GPA) country (Armenia, Aruba, Austria, Belgium, Bulgaria, Canada, Croatia, Cyprus, Czech

Republic, Denmark. Estonia, Finland, France, Germany, Greece, Hong Kong, Hungary, Iceland Ireland, Israel, Italy, Japan, Korea (Republic of), Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Moldova, Montenegro, Netherlands, New Zealand, Norway, Poland, Portugal, Romania, Singapore, Slovak Republic, Slovenia, Spain, Sweden, Switzerland, Taiwan, Ukraine, or United Kingdom);

(2) A Free Trade Agreement (FTA) country (Australia, Bahrain, Canada, Chile, Colombia, Costa Rica, Dominican Republic, El Salvador, Guatemala, Honduras, Korea (Republic of), Mexico, Morocco, Nicaragua, Oman, Panama, Peru, or Singapore);

(3) A least developed country (Afghanistan, Angola, Bangladesh, Benin, Bhutan, Burkina

Faso, Burundi, Cambodia Central African Republic, Chad, Comoros, Democratic Republic of Congo, Djibouti, Equatorial Guinea, Eritrea, Ethiopia, Gambia, Guinea, Guinea-Bissau, Haiti, Kiribati, Laos, Lesotho, Liberia, Madagascar, Malawi, Mali, Mauritania, Mozambique, Nepal, Niger, Rwanda, Samoa, Sao Tome and Principe, Senegal, Sierra

Leone, Solomon Islands, Somalia, South Sudan, Tanzania, Timor-Leste, Togo, Tuvalu, Uganda, Vanuatu, Yemen, or Zambia); or

(4) A Caribbean Basin country…

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it.