Attachment_2,_HATCHET_(WLIC_75D)_DD_FQ2_DBB_18R0.pdf

USCGC HATCHET (WLIC 75309)

USCG 68B BARGE (68019)

SPECIFICATION FOR DRYDOCK REPAIRS

FY2018

Developed By: Arthur McCrohan with David B Bardwell

(Rev-0, 17 October 2017)

USCGC HATCHET (WLIC-75D) DRYDOCK AVAILABILITY FY2018

ii (Rev-0)

TABLE OF CONTENTS

Revisions Record ........................................................................................................................................... v Consolidated List of References ................................................................................................................... vi Consolidated List of Government-furnished Property ................................................................................ xv Consolidated List of Critical Inspection Items ........................................................................................... xvi Principal Characteristics - Tender ............................................................................................................ xvii Principal Characteristics - Barge ............................................................................................................. xviii General Requirements WORK ITEM 1: Hull Plating (U/W Body), Inspect- Tender WORK ITEM 2: Hull Plating (U/W Body), Inspect - Barge WORK ITEM 3: Hull Plating (U/W Body), Ultrasonic Testing - Tender WORK ITEM 4: Hull Plating (U/W Body), Ultrasonic Testing - Barge WORK ITEM 5: Hull and Structural Plating (General) -10.2-Pound Steel, Renew - Tender WORK ITEM 6: Hull and Structural Plating (General) -10.2-Pound Steel, Renew - Barge WORK ITEM 7: Hull and Structural Plating (General) - 12.75-Pound Steel Plate, Renew - Tender WORK ITEM 8: Hull and Structural Plating (General) - 12.75-Pound Steel Plate, Renew - Barge WORK ITEM 9: Hull and Structural Plating (General) - 15.3-Pound Steel Plate, Renew - Tender WORK ITEM 10: Hull and Structural Plating (General) - 15.3-Pound Steel Plate, Renew - Barge WORK ITEM 11: Hull And Structural Plating (General) - 20.4-Pound Steel Plate, Renew - Tender WORK ITEM 12: Hull And Structural Plating (General) - 20.4-Pound Steel Plate, Renew - Barge WORK ITEM 13: Hull and Structural Plating (General) - 7.5-Pound (3/16") Steel Plate, Renew - Tender41 WORK ITEM 14: Hull and Structural Plating (General) - 7.5-Pound (3/16") Steel Plate, Renew - Barge43 WORK ITEM 15: Hull and Structural Plating (General) - 7.65- Pound Steel Plate, Renew - Tender WORK ITEM 16: Hull and Structural Plating (General) - 7.65- Pound Steel Plate, Renew - Barge WORK ITEM 17: Hull And Structural Plating (General) - Cracked Steel Welds, Repairs - Tender WORK ITEM 18: Hull And Structural Plating (General) - Cracked Steel Welds, Repairs - Barge WORK ITEM 19: Hull and Structural Plating -{Insert Plate Size (i.e. 1/2” or 5/16”, etc.) Steel Plate, Renew WORK ITEM 20: Hull and Structural Plating -{Insert Plate Size (i.e. 1/2” or 5/16”, etc.) Steel Plate, Renew WORK ITEM 21: Hull and Structural Plating (General) - Degraded Weld (Steel), Repair - Tender WORK ITEM 22: Hull and Structural Plating (General) - Degraded Weld (Steel), Repair - Barge WORK ITEM 23: Appendages (U/W), Leak Test - Barge WORK ITEM 24: Propulsion Shaft Rope Guards, Inspect and Repair WORK ITEM 25: Appendages (U/W) - Internal, Preserve - Barge WORK ITEM 26: Voids (Non-Accessible), Leak Test - Tender WORK ITEM 27: Voids (Non-Accessible), Leak Test WORK ITEM 28: Voids (Non-Accessible), Internal Surfaces, Preserve WORK ITEM 29: Voids (Non-Accessible), Internal Surfaces, Preserve WORK ITEM 30: Tanks (MP Fuel Service), Clean and Inspect - Tender WORK ITEM 31: Tanks (MP Fuel Service), Clean and Inspect - Barge WORK ITEM 32: Tanks (Potable Water), Clean and Inspect - Tender WORK ITEM 33: Tanks (Potable Water), Clean and Inspect - Barge WORK ITEM 34: Voids (Accessible), Clean and Inspect WORK ITEM 35: Voids (Accessible), Clean and Inspect WORK ITEM 36: Propulsion Shafting; Remove, Inspect, and Reinstall WORK ITEM 37: Propulsion Shaft Seals, Mechanical & Inflatable, Overhaul and Renew WORK ITEM 38: Propulsion Shaft Bearings (External), Check Clearances iii (Rev-0)

WORK ITEM 39: Propellers, Remove, Inspect, and Reinstall WORK ITEM 40: Propeller, Minor Repairs and Reconditioning, Perform WORK ITEM 41: Keel Coolers, Clean, Inspect and Hydro WORK ITEM 42: Main Diesel Engine (MDE) Exhaust Piping, Commercial Clean WORK ITEM 43: Ship Service Diesel Generator (SSDG) Exhaust Piping, Commercial Clean WORK ITEM 44: Boiler Exhaust Stack Uptakes, Commercial Clean WORK ITEM 45: Barge, Diesel Engine Exhaust Piping, Commercial Clean WORK ITEM 46: Fathometer Transducer, Renew – Tender WORK ITEM 47: Fathometer Transducer, Renew – Barge WORK ITEM 48: Vent Ducts (Galley and Pantry Room All), Commercial Cleaning WORK ITEM 49: Vent Ducts (All Other), Commercial Cleaning WORK ITEM 50: Compressed Air Receivers and System Valves (All), Clean, Inspect, Hydro and Lift -

Tender WORK ITEM 51: Compressed Air Receivers and System Valves (All), Clean, Inspect, Hydro and Lift -

Barge WORK ITEM 52: Rudder Assembly; Remove, Inspect and Reinstall WORK ITEM 53: Rudder(s), Preserve (“100%”) WORK ITEM 54: Rudder Stock Bearings Clearances, Check WORK ITEM 55: Spuds, Overhaul - Barge WORK ITEM 56: Spud Wells, Preserve - Barge WORK ITEM 57: Spud Winches, Inspect & Service - Barge WORK ITEM 58: Spud Wells, Inspect - Barge WORK ITEM 59: Boat Boom, Inspect and Service - Tender WORK ITEM 60: Sewage Holding Tank(s), Clean and Inspect - Tender WORK ITEM 61: Sewage Piping, Clean And Flush WORK ITEM 62: Accessible Void(s), Preserve “100%” - Tender WORK ITEM 63: Tanks (Fuel), Preserve “100%” - Tender WORK ITEM 64: Tanks (Fuel), Preserve “Partial” - Tender WORK ITEM 65: Tanks (MP Fuel Storage and Overflow), Preserve “Partial” - Barge WORK ITEM 66: Tanks (Potable Water), Preserve “100%” - Barge WORK ITEM 67: Tanks (Sewage Holding), Preserve “100%” - Tender WORK ITEM 68: Tanks (Sewage Holding), Preserve “Partial” - Tender WORK ITEM 69: Accessible Void(s), Preserve “Partial” - Tender WORK ITEM 70: Accessible Void(s), Preserve “Partial” - Barge WORK ITEM 71: Tanks (MP Fuel Service), Preserve “Partial”- Barge WORK ITEM 72: Tanks (Potable Water), Preserve “100%” - Tender WORK ITEM 73: Tanks (Potable Water), Preserve “Partial” - Tender WORK ITEM 74: Tanks (Potable Water), Preserve “Partial” - Barge WORK ITEM 75: U/W Body, Preserve (100%) - Tender WORK ITEM 76: U/W Body, Preserve (100%) - Barge WORK ITEM 77: U/W Body, Preserve (Partial - Condition A) WORK ITEM 78: U/W Body, Preserve (Partial - Condition A) WORK ITEM 79: U/W Body, Preserve (Partial - Condition B) - Tender WORK ITEM 80: U/W Body, Preserve (Partial - Condition B) - Barge WORK ITEM 81: U/W Body, Preserve (Partial - Condition C) - Tender WORK ITEM 82: U/W Body, Preserve (Partial - Condition C) - Barge WORK ITEM 83: Stern Tube Interior Surfaces, Preserve 100% WORK ITEM 84: Hull Plating Freeboard, Preserve – Partial - Tender WORK ITEM 85: Hull Plating Freeboard, Preserve – Partial - Barge WORK ITEM 86: Hull Plating Freeboard, Preserve “100%” - Tender WORK ITEM 87: Hull Plating Freeboard, Preserve “100%” - Barge iv (Rev-0)

WORK ITEM 88: Cathodic Protection / Zinc Anodes, Renew - Tender WORK ITEM 89: Cathodic Protection / Zinc Anodes, Renew - Barge WORK ITEM 90: Drydock - Tender WORK ITEM 91: Drydock - Barge WORK ITEM 92: Temporary Services, Provide - Tender WORK ITEM 93: Temporary Messing and Berthing, Provide WORK ITEM 94: Sea Trial Performance, Support, Provide WORK ITEM 95: Boat Davit Winch, Shrink Wrap WORK ITEM 96: Buoy and Cargo Handling Crane, Shrink Wrap WORK ITEM 97: Lead Dust, Clean WORK ITEM 98: Sewage Piping, Renew WORK ITEM 99: Lead-Based Paint and Asbestos-Containing Material, Perform Spot Abatement WORK ITEM 100: Water Mist Systems Inspect & Hydro WORK ITEM 101: Structural Repair, Lazarette WORK ITEM 102: Fwd Trim Tank Striker Plate, Renew WORK ITEM 103: Sewage Shore Tie Valve, Renew WORK ITEM 104: Deck Covering, Renew (Various Compartments) WORK ITEM 105: Sea Chest Strainers, Renew WORK ITEM 106: Deck Drain, Renew WORK ITEM 107: Potable Water Piping & Valve, Install WORK ITEM 108: Compartment Insulation (General), Renew WORK ITEM 109: 01 Deck and Pilothouse Top Stuffing Tubes, Renewal WORK ITEM 110: Ladder Rung, Renew WORK ITEM 111: Firemain Pump Drip Pan, Renew WORK ITEM 112: Ventilation Fans, Overhaul v (Rev-0)

REVISIONS RECORD

This page is used to record specification revisions, which may have occurred subsequent to a Revision 0 (Rev-0) package. Information listed is intended to provide contractors and field unit personnel a means to ensure all the current specification revision pages are present when reviewing or utilizing this specification package.

DATE REV# WORK

ITEM#

CHANGES MADE

NOTE : All work item and paragraph numbers listed above for a given revision correspond to same numbers in the previous revision. This revised specification is self-contained with all of the above listed changes incorporated.

vi (Rev-0)

CONSOLIDATED LIST OF REFERENCES

The below-listed documents form a part of this specification to the extent specified herein. Approval/publication dates or revision dates/numbers are also identified, to ensure that same document versions are used at time of specification writing and during contract execution.

All Coast Guard drawings, technical publications, and standard specifications will be provided to contractors by the Coast Guard at an appropriate time, or upon request, free of charge. Other Government documents may be accessed – free of charge – as follows:

• MIL/DOD/CID Specifications: http://www.assistdocs.com/search/search_basic.cfm

• Commandant Instruction Manuals: http://www.uscg.mil/directives/default.asp

• Public Laws, Code of Federal Regulations, U.S Codes, and other Federal Government laws::

www.gpoaccess.gov

The Government is aware of the following internet web links where contractors may procure commercial specifications:

• American Welding Society (AWS): http://www.awspubs.com/index.php

• ANSI, ASTM, IEEEE, NFPA, ASME, SAE Standards: http://www.techstreet.com/

• NFPA: http://www.nfpa.org

• SSPC Standards and pictorial guides: http://shopping.netsuite.com/sspcmarketplace

COAST GUARD DRAWINGS

2901-004, Rev -, Curves of Form 75 WAGL 2200-010, -Rev D, Main Rudder Stock And Fittings For Jastram S2-16-2-35 Steering System 75 WAGL 2200-011, Rev D, Flanking Rudder Stock And Fittings For Jastram S2-16-2-35 Steering

System Coast Guard 68B CGB 2602-001, Rev -, Spud Well & Stern Log Coast Guard Drawing 68 CGB 0700-003, Rev -, 68FT Steel Barge Docking Block Arrangement (“A” and

“B” Class) Coast Guard Drawing 68 CGB 0700-003, Rev-, 68FT Steel Barge Docking Block Arrangement (“A” and

“B” Class) Coast Guard Drawing 68 CGB 0700-003, Rev. -, 68FT Steel Coast Guard Drawing 68 CGB 0700-003, Rev. -, 68FT Steel Barge Docking Block Arrangement (“A” and “B” Class) Coast Guard Drawing 68 CGB 1101-003, Rev C, 68FT Steel Barge Lines, Plating, and Deck & Bottom

Framing Plans (CGB 68018-68020) Coast Guard Drawing 68 CGB 4901-001 (68016-68017), Rev A, Compressed Air Piping Arrangement Coast Guard Drawing 68 CGB 4901-002 (68018-68020), Rev -, Compressed Air Piping Arrangement Coast Guard Drawing 68 CGB-1101-1, Sheet 1, Rev - , Structural Sections and Details Coast Guard Drawing 68B CGB 0103-010, Rev -, Inboard Profile Coast Guard Drawing 68B CGB 0103-8, Rev 1, General Arrangement Plan and Outboard Profile Coast Guard Drawing 68B CGB 1105-002, Rev -, Bulkheads http://www.assistdocs.com/search/search_basic.cfm http://www.uscg.mil/directives/default.asp http://www.gpoaccess.gov/ http://www.awspubs.com/index.php http://www.techstreet.com/ http://www.nfpa.org/ http://shopping.netsuite.com/sspcmarketplace vii (Rev-0)

Coast Guard Drawing 68B CGB 2901-004, Rev -, Curves of Form Coast Guard Drawing 68B CGB 2901-004, Rev-, Curves of Form Coast Guard Drawing 68B CGB 2901-005, Rev -, Tank Capacities Coast Guard Drawing 68B CGB 5501-002, Rev -, Fuel Oil and Exhaust Piping-Plan and Details Coast Guard Drawing 68B CGB 5501-1, Rev B, Fuel Oil & Exhaust Piping – Plan & Details Coast Guard Drawing 68B CGB-103-5, Rev A, Hold Arrangement Plan Coast Guard Drawing 68B CGB-1103-1, Rev C, Lines, Plating, Deck, and Bottom Framing Plans Coast Guard Drawing 68-CGB 1112-2, Rev -, Transducer Wet Wall & Blister Installation Coast Guard Drawing 68-CGB-2901-2, Sheet 2, Rev, Tank Capacity Tables Coast Guard Drawing 75 WAGL 0103-2, Rev 1, Outboard Profile and Inboard Profile Coast Guard Drawing 75 WAGL 0103-4, Rev A, Booklet of General Plans Coast Guard Drawing 75 WAGL 0700-004, Rev A, 75 WLIC Docking Plan Coast Guard Drawing 75 WAGL 0700-004, Rev A, Docking Plan Coast Guard Drawing 75 WAGL 2901-004, Rev -, Curves of Form Coast Guard Drawing 75 WAGL 4103-22, Rev B, Exhaust Piping Mods to Suit Coast Guard Drawing 75 WAGL 4103-xxx, Exhaust Piping Mods to Suit Coast Guard Drawing 75 WAGL 633-001, Rev A, Cathodic Protection Coast Guard Drawing 75 WLIC 85-1, Rev-, Booklet of General Plans Coast Guard Drawing 75 WLIC 111-002, Rev -, Grid Cooler Recess (AXE) Coast Guard Drawing 75 WLIC 123-2, Rev-, Sewage Tank Coast Guard Drawing 75 WLIC 261-1, Rev A, Diagram - FO Service Systems Coast Guard Drawing 75 WLIC 261-2, Rev B, Arrangement - FO Service Systems Coast Guard Drawing 75 WLIC 536-001, Rev -, Diagram Jacket Water System (AXE) Coast Guard Drawing 75 WLIC 536-002, Rev A, Main Engine & Generator Jacket Water System

Arrangement & Details (AXE) Coast Guard Drawing 75 WLIC 593-2, Rev B, Arrangement Vacuum Flush System Coast Guard Drawing 75_WLIC_320_1, Rev E, Power System One Line.

Coast Guard Drawing 75_WLIC_321_1, Rev A, Power System Deck Plan Coast Guard Drawing 75_WLIC_321_2, Rev _, Main Cableways Arrangements & Details Coast Guard Drawing 75_WLIC_331_1, Rev A, Lighting System Deck Plan Coast Guard Drawing 75D 2200-016, Rev D, Rudder Post Installation For Jastrum S2-16-2-35 Steering

System Coast Guard Drawing 75D Drawing 1101-1, Rev C, Shell Expansion (75306-75307) Coast Guard Drawing 75D WAGL 0500-003, Rev -, Lines and Offsets Coast Guard Drawing 75D WAGL 0700-004, Rev -, 75FT “D” Class Towboat Docking Block

Arrangement Coast Guard Drawing 75D WAGL 103-7, Rev C-, Outboard Profile and Inboard Profile (75306-75307) Coast Guard Drawing 75D WAGL 1101-001, Rev C, Shell Expansion (75306) Coast Guard Drawing 75D WAGL 1101-001, Rev C, Shell Expansion (75306-75307) Coast Guard Drawing 75D WAGL 1101-003, Rev -, Shell Expansion (75309-75310) Coast Guard Drawing 75D WAGL 1101-006, Rev B, New Grid Cooler Pocket P/S to Suit 80MDDCD

SSDG (CLAMP & HATCHET)

viii (Rev-0)

Coast Guard Drawing 75D WAGL 1103-002, Rev -, Framing Plan Coast Guard Drawing 75D WAGL 1103-003, Rev A, Frames 4, 12, 16, 21, 31, & 36 Coast Guard Drawing 75D WAGL 1105-007, Rev -, Miscellaneous Bulkheads and Frames Coast Guard Drawing 75D WAGL 2200-001, Rev A, Rudder Stock and Fittings (75306-75307) Coast Guard Drawing 75D WAGL 4000-001, Rev B, Machy Arrg (75306-75307) Coast Guard Drawing 75D WAGL 4103-005, Rev B, Exhaust Piping Plan (75306-75307) Coast Guard Drawing 75D WAGL 4103-006, Rev A, Exhaust Piping Sects (75306-75307) Coast Guard Drawing 75D WAGL 4103-021, Rev C, Jacket Water Mods to Suit 80MDDCD SSDG

(CLAMP & HATCHET)

Coast Guard Drawing 75D WAGL 4103-024, Rev A, Jacket Water Mods to Suit IF1312 MDE (CLAMP

& HATCHET)

Coast Guard Drawing 75D WAGL 4808-003 Coast Guard Drawing 75D WAGL 4901-001, Rev B, Compressed Air Flow Diagram Coast Guard Drawing 75D WAGL 4901-004, Rev -, Compressed Air Flow Diagram Coast Guard Drawing 75D WAGL 700-004, Rev -, 75FT “D” Class Towboat Docking Block

Arrangement Coast Guard Drawing 75D WAGL-1103-02, Rev -, Hull Framing Plan (75306-75307 Coast Guard Drawing 75D-WAGL 2200-14, Rev B, Steering System Arrangement for Jastram S2-16-2-

Coast Guard Drawing 75D-WAGL 2200-15, Rev B, Flanking Steering System Arrangement for Jastrum

S2-16-2-35 Coast Guard Drawing 75D-WAGL 2200-16, Rev D, Rudder Post Installation for Jastrum S2-16-2-35

Steering System Coast Guard Drawing 75D-WAGL 3801-3, Rev -, Vent Heating & A/C (75309-75310) Coast Guard Drawing 75D-WAGL 4301-3, Rev -, Shafting Installation to Suit If 1312 MDE Coast Guard Drawing 75D-WAGL 4301-3, Rev C, Shafting Installation to Suit If 1312 MDE Coast Guard Drawing 75D-WAGL 4803-7, Rev -, Engine Room Water Fog to Suit 80MDDCD SSDG Coast Guard Drawing 75D-WAGL 4803-8, Rev -, Machy Sp Fire Extinquishing Sys Wrg Diag to Suit

80MDDCD SSDG

Coast Guard Drawing 75D-WAGL 4804-4, Rev -, Fresh Wtr Flow Diag (75309-75310) Coast Guard Drawing 75D-WAGL 4804-5, Rev -, Fresh Wtr & Waste Piping Plan (75309-75310) Coast Guard Drawing 75D-WAGL 4804-6, Rev -, Fresh Wtr & Waste Piping Sects (75309-75310) Coast Guard Drawing 75D-WAGL 4808-3, Rev A, Marine Sanitary Dev- Sys Alts Coast Guard Drawing 75D-WAGL 4823-2, Rev -, Sea Chest (75309-75310) Coast Guard Drawing 75D-WAGL 0103-19, Rev B, Booklet of General Plans (75309) Coast Guard Drawing 75D-WAGL 103-19, Rev A, Booklet of Gen Plans (75309) Coast Guard Drawing 75D-WAGL 103-19, Rev A, Booklet Of Gen Plans (75309) Coast Guard Drawing 75D-WAGL 1101-03, Rev -, Shell Expansion (75309-75310) Coast Guard Drawing 75D-WAGL 1101-3, Rev -, Shell Expansion (75309) Coast Guard Drawing 75D-WAGL 1103-09, Rev -, Frames 43, 47 & Dets (75309-75310) Coast Guard Drawing 75D-WAGL 1103-10, Rev -, Upper Dk & Wheelhse Dk Framing Plan (75309-

75310) Coast Guard Drawing 75D-WAGL 3901-1, Rev A, Insulation & Sheathing Schedule (75309-75310) ix (Rev-0)

Coast Guard Drawing 75D-WAGL 3902-06, Rev -, Ext Bhds on Wlhse Dk & Wlhse Top Framing Plan (75309-75310)

Coast Guard Drawing 75D-WAGL 4000-1, Rev -, Mach Arr Coast Guard Drawing 75D-WAGL 4301-3, Rev C, Shafting Installation to Suit If 1312 MDE Coast Guard Drawing 75D-WAGL 4804-5, Rev -, Freshwater & Waste Piping Plan (75309-75310) Coast Guard Drawing 75D-WAGL 4804-6, Rev -, Freshwater & Waste Piping Sections (75309-75310) Coast Guard Drawing 75D-WAGL 4809-02, Rev -, Vent Fills & Sounds (75309-75310) Coast Guard Drawing 75D-WAGL_2001_56, Rev, Title Tower Crane Outline & Dims Drawing Coast Guard Drawing 75D-WAGL-103-19, Rev B, General Arrangemnr Coast Guard Drawing 75D-WAGL-2200-014, Rev B, Steering System Arrangement For Jastram S2-16-

2-35 Coast Guard Drawing 75D-WAGL-2200-015, Rev B, Flanking Steering System Arrangement For

Jastrum S2-16-2-35 Coast Guard Drawing 75D-WAGL-4808-1, Scuppers & Drains (75309-75310) Coast Guard Drawing 75D-WAGL-604-6, Rev -, Ladders Coast Guard Drawing 75-WAGL 2200-11, Rev D, Flanking Rudder Stock and Fittings for Jastram S2-

16-2-35 Steering System Coast Guard Drawing 75-WAGL 4301-5, Rev N, Shafting Machining Details to Suit If 1312 MDE Coast Guard Drawing 75-WAGL 4400-3, Rev L, Propeller to Suit IF1312 MDE Coast Guard Drawing 75-WAGL 1112-01, Rev -, Foundations Coast Guard Drawing 75-WAGL 4301-5, Rev N, Shafting Machining Details to Suit If 1312 MDE Coast Guard Drawing 75-WAGL 4400-3, Rev L, Propeller to Suit IF1312 MDE Coast Guard Drawing 75-WAGL_103_19, Rev. B, Book of Gen. Plans (75309) Coast Guard Drawing 75-WAGL_1103_1, Rev C, Title Boat Davit & Cradle for 16ft AB-SKF-

Arrangement & Details Coast Guard Drawing 75-WLIC 555-1, Rev-, Diag – Fire Fighting Systems Coast Guard Drawing 75-WLIC 555-2, Rev A, Arrg’t - Fire Fighting Systems, Machinery Space Fire

Extinguishing Sys Coast Guard Drawing 75-WLIC 555-3, Rev A, Wrg Diag Coast Guard Drawing 75-WLIC 593-3, Rev -A, Diagram Sewage Treatment & Discharge System Coast Guard Drawing 75-WLIC 635-1, Rev C, Hull Insulation Schedule & Installation Details Coast Guard Drawing 75-WLIC_422_1, Rev. C, Navigation Light ARR, BLK & ELEM WRG DIAG.

Coast Guard Drawing 75-WLIC_423_1, Rev._, SPS-461 GPS System BWD & Installation Details Coast Guard Drawing FL 6713-203, Rev -, CRP-V850 Transducer (SS505) Adapter Assembly Coast Guard Fleet Drawing FL 2602-10, Rev J, Spud Arrangements and Details Coast Guard Fleet Drawing FL 2804-12, Rev -, U.S.C.G. Emblem Coast Guard Fleet Drawing FL 2804-22, Rev-, Consolidated Visual ID for Cutters Coast Guard Fleet Drawing FL-1112-18, Rev -, HU40 Series Spud Winch Foundation Coast Guard Drawing 75D-WAGL_103_4 Gen ARRG MN DK & Hold Coast Guard Drawing 75D-WAGL_103_5 Gen ARRG Upper DK & Wheelhse DK NAVSEA Drawing 803-921865, Rev R, Cathodic Protection Hull Zinc Anodes NAVSEA Drawing 804-5773931, Rev A, Acoustic & Thermal Insulation For Compartments Installation

Details x (Rev-0)

Or

COAST GUARD PUBLICATIONS

Coast Guard Commandant Instruction (COMDTINST) M10360.3, Jun 2006, Coatings and Colors

Manual Coast Guard Technical Publication (TP) 10019, Fixed Fire Fighting System Coast Guard Technical Publication (TP) 3494, 09-DEC-03, Shaft Seal - Type Fse Coast Guard Technical Publication (TP) 3494, 2013, Shaft Seal - Type FSE Coast Guard Technical Publication (TP) 4506, Wartsila TM-EL-68839, Issue A, Mar 2005, Rudderstock

Seal Type EL Coast Guard Technical Publication (TP) 4958, Section A, Amendment 1; Mar 2011, Utility Air Winch

Model HU-40 Series Coast Guard Technical Publication (TP) 5491, SWBS 256, Apr 2013, Keel Grid Cooler (Duramax) Surface Forces Logistics Center Standard Specification (SFLC Std Spec) 0000, 2014, General

Requirements Surface Forces Logistics Center Standard Specification (SFLC Std Spec) 0740, 2014, Welding and Allied

Processes Surface Forces Logistics Center Standard Specification (SFLC Std Spec) 3041, 2014, Shipboard

Electrical Cable Test Surface Forces Logistics Center Standard Specification (SFLC Std Spec) 3042, 2014, Shipboard

Electrical Cable Removal, Relocation, Splice, Repair, and Installation Surface Forces Logistics Center Standard Specification (SFLC Std Spec) 6310, 2014, Requirements for

Preservation of Ship Structures Surface Forces Logistics Center Standard Specification 0000 (SFLC Std Spec 0000), 2012, General

Requirements Surface Forces Logistics Center Standard Specification 0000 (SFLC Std Spec 0000), 2014, General

Requirements Surface Forces Logistics Center Standard Specification 0740 (SFLC Std Spec 0740), 2014, Welding and

Allied Processes Surface Forces Logistics Center Standard Specification 0740 (SFLC Std Spec 0740), 2014, Surface Forces Logistics Center Standard Specification 3020 (SFLC Std Spec 3020), 2014, Overhaul AC

Electrical Motors Surface Forces Logistics Center Standard Specification 5000 (SFLC Std Spec 5000), 2012, Auxiliary

Machine Systems Surface Forces Logistics Center Standard Specification 5000 (SFLC Std Spec 5000), 2014, Auxiliary

Machine Systems Surface Forces Logistics Center Standard Specification 5100 (SFLC Std Spec 5100), 2014, Clean

Shipboard Ventilation Systems Surface Forces Logistics Center Standard Specification 6310 (SFLC Std Spec 6310), 2012, Requirements for Preservation of Ship Structures Surface Forces Logistics Center Standard Specification 6310 (SFLC Std Spec 6310), 2014, Requirements for Preservation of Ship Structures Surface Forces Logistics Center Standard Specification 6341 (SFLC Std Spec 6341), 2014, Install Interior

Deck Covering Systems Surface Forces Logistics Center Standard Specification 8634 (SFLC Std Spec 8634), 2014, Drydocking xi (Rev-0)

Surface Forces Logistics Center Standard Specification 8635 (SFLC Std Spec 8635), 2014, Temporary Services

Surface Forces Logistics Center Standard Specification 8636 (SFLC Std Spec 8636), 2012, Temporary Hull Accesses

Surface Forces Logistics Center Standard Specification 8636 (SFLC Std Spec 8636), 2014, Temporary Hull Accesses

Surface Forces Logistics Center Technical Specification 245-2 (SFLC TS 245-2), 2014, CPP Propellers and Blades

Welding and Allied Processes

OTHER REFERENCES

«OTHER_REF»

«OTHERREF»

AAA/CAA - http://newsroom.aaa.com/diamond-ratings/diamond-rating-definitions/ American Bureau of Shipping (ABS) 2, Rule Requirements for Survey After Construction, 2014, Part 7, Appendix Section 10, Guide for Bronze and Stainless Steel Propeller Castings American National Standards Institute/American Water Works Association (ANSI/AWWA) C652, 2002, Disinfection of Water-Storage Facilities American National Standards Institute/American Water Works Association (ANSI/AWWA) C652, 2011, Disinfection of Water-Storage Facilities American National Standards Institute/NSF International (ANSI/NSF) 61, 2008, Drinking Water System

Components - Health Effects American National Standards Institute/NSF International (ANSI/NSF) 61, 2015, Drinking Water System

Components - Health Effects American Society for Testing and Materials (ASTM) International F1508, 2016, Standard Specification for Angle Style, Pressure Relief Valves for Steam, Gas, and Liquid Services American Society of Mechanical Engineers (ASME) B16.34, 2013, Valves-Flanged, Threaded, and

Welding End ASTM International (ASTM) D1330, 2004, Standard Specification for Rubber Sheet Gaskets ASTM International (ASTM) D1330, 2010, Standard Specification for Rubber Sheet Gaskets ASTM International (ASTM) D1709, 2008, Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart Method ASTM International (ASTM) D1922, 2008, Standard Test Method for Propagation Tear Resistance of

Plastic Film and Thin Sheeting by the Pendulum Method ASTM International (ASTM) D3359, 2009, Standard Test Methods for Measuring Adhesion by Tape

Test ASTM International (ASTM) D3951, Reapproved 2004, Standard Practice for Commercial Packaging ASTM International (ASTM) D3951, Reapproved 2010, Standard Practice for Commercial Packaging ASTM International (ASTM) D4138, 2013, Standard Practices for Measurement of Dry Film Thickness of Protective Coating Systems by Destructive, Cross-Sectioning Means ASTM International (ASTM) D5363, 2008; Standard Specification for Anaerobic Single-Component

Adhesives (An) ASTM International (ASTM) D5363, 2016, Standard Specification for Anaerobic Single-Component

Adhesives (AN) xii (Rev-0)

ASTM International (ASTM) D882, 2009, Standard Test Method for Tensile Properties of Thin Plastic Sheeting

Coast Guard Drawing 75-WAGL 4301-5, Rev N, Shafting Machining Details to Suit If 1312 MDE Coast Guard Drawing 75-WAGL 4400-3, Rev L, Propeller to Suit IF1312 MDE Code of Federal Regulations (CFR) Title 29, Part 1915, 2014, Occupational Safety and Health Standards for Shipyard Employment Code of Federal Regulations (CFR) Title 46, Part 90-139, 2011, Shipping Commercial Item Description (CID) A-A-52624, Nov 2008, Antifreeze, Multi Engine Type, Ethylene

Glycol (For Caterpillar equipment applications, use CAT Extended Life Pre-Mix coolant.)

Commercial Item Description (CID) A-A-59313, Nov 2003, Thread Compound; Anti-seize, Zinc Dust-

Petrolatum DOD-STD-2187, Aug 1987, Chemical Cleaning of Salt Water Piping Systems Federal Specification (Fed Spec) HH-P-151, Mar 1991, Packing; Rubber-Sheet, Cloth-Insert FORBES (formerly MOBIL) Travel Guide - http://www.forbestravelguide.com/ Hotel-Motel National Master List, http://www.usfa.fema.gov/applications/hotel/ International Standard For Organization (ISO) 484/2, 1981, Shipbuilding - Ship Screw Propeller -

Manufacturing Tolerances - Part 2: Propellers of Diameter Between 0.80 and 2.50 m, Inclusive International Standard For Organization (ISO) 484/2, 1981, Shipbuilding - Ship Screw Propeller -

Manufacturing tolerances - Part 2: Propellers of Diameter Between 0.80 and 2.50m, Inclusive International Standard Organization (ISO) 2953, 1999, Mechanical Vibration, Balancing Machines, Description and Evaluation Manufacturers Standardization Society of the Valve and Fittings Industry (MSS) SP-61, 2013 Edition, Pressure Testing Of Valves Manufacturers Standardization Society of the Valve and Fittings Industry (MSS) SP-67, 2011 Edition, Butterfly Valves Manufacturers Standardization Society of the Valve and Fittings Industry (MSS) SP-72, 2010 Edition, Ball Valves with Flanged or Butt-Welding Ends for General Service Manufacturers' Standardization Society of the Valve and Fittings Industry (MSS) SP-80, 2013 Edition, Bronze Gate, Globe, Angle and Check Valves Manufacturers Standardization Society of the Valve and Fittings Industry (MSS), SP-58, 2009, Pipe

Hangers and Supports – Materials, Design, Manufacture, Selection, Application and Installation MIL PRF-16173, Sep 2006, Corrosion Prevention Compound, Solvent Cut Back, Cold Application MIL-A-18001, May 2005, Anodes, Sacrificial Zinc Alloy (Commercially Accepted - ASTM B418) MIL-A-22262, Mar 1996; Abrasive Blasting Media Ship Hull Blast Cleaning MIL-DTL-1222, Dec 2000, Studs, Bolts, Screws and Nuts for Applications Where a High Degree of

Reliability Is Required MIL-I-3064, Mar 1991, Insulation, Electrical, Plastic-Sealer MIL-PRF-16173, 2006, Corrosive Preventive Compound, Solvent Cutback, Cold Application MIL-PRF-16173, Sep 2006, Corrosion Prevention Compound, Solvent Cut-Back, Cold-Application MIL-PRF-16173, Sep 2006, Corrosion Preventive Compound, Solvent Cutback, Cold-Application MIL-PRF-24613, Dec 1990, Deck Covering Materials, Interior, Cosmetic Polymeric MIL-PRF-24647, 2013, Paint System, Anticorrosive and Antifouling, Ship Hull MIL-PRF-24647, Apr 2013, Paint System, Anticorrosive and Antifouling, Ship Hull MIL-PRF-24647, Jun 2006, Paint System, Anticorrosive and Antifouling, Ship Hull xiii (Rev-0)

MIL-PRF-24647, Jun 2006, Paint System, Anticorrosive and Antifouling, Ship Hull MIL-S-45180, 1998; Sealing Compound, Gasket, Hydrocarbon Fluid and Water Resistant MIL-STD-167-1, Nov 2005, Mechanical Vibrations of Shipboard Equipment (Type I - Environmental and Type II - Internally Excited) MIL-STD-2003-3, Sep 2009, Electric Plant Installation Standard Methods for Surface Ships &

Submarines (Penetrations) Public Law 101-391, 1990, Hotel and Motel Fire Safety Act Society of Automotive Engineers (SAE) Aerospace Material Specification (AMS) C6183, 2007, Cork and

Rubber Composition Sheet; For Aromatic Fuel And Oil Resistant Gaskets Society of Automotive Engineers (SAE) Aerospace Material Specification (AMS) C6183, 2013, Cork and

Rubber Composition Sheet; For Aromatic Fuel and Oil Resistant Gaskets Society of Automotive Engineers (SAE) Aerospace Material Specification (AMS) C6183, 2013, Cork and

Rubber Composition Sheet; For Aromatic Fuel And Oil Resistant Gaskets The Society for Protective Coatings (SSPC) Surface Preparation Specification No. 1 (SSPC-SP 1), 2004, Solvent Cleaning The Society for Protective Coatings (SSPC) Surface Preparation Specification No.1 (SSPC-SP 1), 2015, Solvent Cleaning The Society for Protective Coatings (SSPC) Surface Preparation Specification No.11 (SSPC-SP 11), 2004, Power Tool Cleaning to Bare Metal The Society for Protective Coatings (SSPC) Surface Preparation Specification No.11 (SSPC-SP 11), 2012, Power Tool Cleaning to Bare Metal The Society for Protective Coatings (SSPC) Surface Preparation Specification No.3 (SSPC-SP 3), 2004, Power Tool Cleaning The Society for Protective Coatings (SSPC), January 2015, Paint Application Specification No. 2 (PA-2), Procedure for Determining Conformance to Dry Coating Thickness Requirements The Society for Protective Coatings (SSPC)/NACE International (NACE) Joint Surface Preparation

Standard SSPC-SP 10/NACE No.2, 2007, Near-White Blast Cleaning The Society for Protective Coatings (SSPC)/NACE International (NACE) Joint Surface Preparation

Standard SSPC-SP 12/NACE No.5, 2002, Surface Preparation and Cleaning of Metals by Waterjetting Prior to Recoating

The Society for Protective Coatings (SSPC)/NACE International (NACE) Joint Surface Preparation Standard SSPC-SP 12/NACE No.5, 2007, Surface Preparation and Cleaning of Steel & Other Hard Materials by High and Ultrahigh Pressure Water Jetting

The Society for Protective Coatings (SSPC)/NACE International (NACE) Joint Surface Preparation Standard SSPC-SP 7/NACE No.4, 2007, Brush-Off Blast Cleaning

The Society for Protective Coatings (SSPC)/NACE International (NACE) Joint Surface Preparation Standard SSPC-SP WJ-2/NACE WJ-2, 2012, Waterjet Cleaning of Metals – Very Thorough Cleaning

The Society for Protective Coatings (SSPC)/NACE International (NACE) Joint Surface Preparation Standard SSPC-SP WJ-2/NACE WJ-2, 2012, Waterjet Cleaning of Metals – Very Thorough Cleaning

The Society for Protective Coatings (SSPC)/NACE International (NACE) Joint Surface Preparation Standard SSPC-SP WJ-4/NACE WJ-4, 2012, Waterjet Cleaning of Metals – Light Cleaning

The Society for Protective Coatings (SSPC)/NACE-International (NACE) Joint Surface Preparation Standard SSPC-SP 10/NACE No. 2, 2004, Near-White Blast Cleaning xiv (Rev-0)

The Society for Protective Coatings (SSPC)/NACE-International (NACE) Joint Surface Preparation Standard SSPC-SP 10/NACE No. 2, 2007, Near-White Blast Cleaning xv (Rev-0)

CONSOLIDATED LIST OF GOVERNMENT-FURNISHED PROPERTY

The following is a list of property, which the Government will furnish. This list supersedes any other material obligations indicated or implied by referenced drawings.

WORK

ITEM

MTI ITEM

DESCRIPTION

NSN/PN QTY ESTIMATED

COST

($/UNIT)

36 Y **Propeller shaft 2010-01-557-1512 1 ea. 19,184.17 37 N Wartsila FSE

H74537-02 Face Changeout Kit

(WLP001365-002)

NSN: 01-560-3273 2 ea. 6,690.00

38 N Wartsila FSE H74537-02 Major

Overhaul Kit

(WLP001365-001)

NSN: 01-560-3274 2 ea. 7,680.00

41 Y Propeller right hand NSN: 2010-01-534-9089 1 ea. 10,129.00 41 Y Propeller left hand NSN: 2010-01-534-9095 1 ea. 10,129.00 43 N ***Coolant 40 gallons $400.00

48 N ***Fathometer Transducer, Shallow Water, 50-200 kHz

(Airmar Technology

SS555)

NSN: 5845-01-465-9723 1 ea. 334.95

49 N ***Fathometer Transducer, Shallow Water, 50-200 kHz

(Airmar Technology

SS505)

NSN: 5845-01-470-2500 1 ea. 343.63

54 Y **Rudder - Steering NSN: 2040-01-530-9095 2 ea. 28,675.25 54 Y **Rudder - Flanking NSN: 2040-01-531-4393 2 ea. 37,850.50 54 Y **Upper Rudder bearing (SKF PN

23222CC/W33)

NSN: 3110-01-F11-2241 4 ea. 547.88

54 N Rudder EL Seal, Major Overhaul Kit

(WLP-001427001)

NSN: 5330-01-646-5935 4 ea. 4,000.00

92 Y *Transducer Cover Plate

N/A 1 ea. 50.00

93 Y *Transducer Cover Plate

N/A 4 ea. 50.00

*Government-loaned property, which shall be returned to the vessel upon completion of the availability.

**New or refurbished equipment that the Government may provide for installation in place of existing equipment.

***Government-furnished property, which is to be supplied by either the vessel or the C4IT ServiceCenter xvi (Rev-0)

CONSOLIDATED LIST OF CRITICAL INSPECTION ITEMS

The following is a list of work items, which contain Critical Inspection reports, which the Contractor must complete within the first 25% of the availability contract period (see SFLC Std Spec 0000, paragraph 3.2.6.5 (Inspection report particulars)):

Work Item Title

3 Hull Plating (U/W Body), Ultrasonic Testing - Tender

4 Hull Plating (U/W Body), Ultrasonic Testing - Barge

23 Appendages (U/W), Leak Test - Barge

26 Voids (Non-Accessible), Leak Test - Tender

27 Voids (Non-Accessible), Leak Test

30 Tanks (MP Fuel Service), Clean and Inspect - Tender

31 Tanks (MP Fuel Service), Clean and Inspect - Barge

36 Propulsion Shafting; Remove, Inspect, and Reinstall

37 Propulsion Shaft Seals, Mechanical & Inflatable, Inspect and Clean

38 Propulsion Shaft Seals, Mechanical & Inflatable, Overhaul and Renew

39 Propulsion Shaft Bearings (External), Check Clearances

40 Propellers, Clean And Inspect

54 Rudder Assembly; Remove, Inspect and Reinstall

61 Boat Boom, Inspect and Service - Tender

64 Accessible Void(s), Preserve “100%” - Tender

71 Accessible Void(s), Preserve “Partial” - Tender

72 Accessible Void(s), Preserve “Partial” - Barge

77 U/W Body, Preserve (100%) - Tender

78 U/W Body, Preserve (100%) - Barge xvii (Rev-0)

PRINCIPAL CHARACTERISTICS - TENDER

75' WLIC (D-CLASS), TENDER

PHYSICAL

Length overall 75' 0" Depth 7' 7-3/4" Maximum beam 22' 0" Height of highest projection 32' 0" Full load draft 4' 4 11/16" LCF Draft Full load displacement 148.49 Long Tons Fresh Water Shore tie voltage requirements 440 VAC / 3 Phase Frame spacing 1' 6"

HULL

Hull material Steel

MACHINERY

Number of propellers 2 Number of blades 4 Diameter of propeller 48" Pitch 40" fixed

RPM 400

Shaft Diameter 4.5”

TANK CAPACITIES

Fuel tanks Fresh water tanks Lube oil xviii (Rev-0)

PRINCIPAL CHARACTERISTICS - BARGE

68' CGB (B-CLASS: 68016 -68020), BARGE

PHYSICAL

Length overall 68' 6-1/2" Depth 7' 0" Maximum beam 28' 0" Full load draft 3' 0" Full load displacement 117 Long Tons Shore tie voltage requirements 440 VAC / 3 Phase Frame spacing 1' 0"

1 (Rev-0)

00000_1216_FLT

REC_00000_FLT_Commercial Project @ Contractor’ Facility (1212)

General Requirements

1. SCOPE

1.1 Intent. This standard specification invokes general requirements for conducting vessel repairs performed at a commercial contractor’s facility for Coast Guard vessels.

1.2 Term interchangeability. The terms 'Contractor', 'CG Yard', 'NAVSTA EVERETT', 'shipyard', 'Base', and 'Coast Guard Industrial' are used interchangeably in this specification. Where the primary service provider is Coast Guard personnel, references to contractor and other noted descriptors within this specification or within drawings, publications, SFLC Standard Specifications or other commercial and military references are deemed the same as prime service provider.

2. REFERENCES

COAST GUARD DRAWINGS

None

COAST GUARD PUBLICATIONS

Coast Guard Commandant Instruction (COMDTINST) M10360.3 (series), Coatings and Color Manual Surface Forces Logistics Center Standard Specification 0000 (SFLC Std Spec 0000), 2014, General

Requirements Surface Forces Logistics Center Standard Specification 0740 (SFLC Std Spec 0740), 2014, Welding and

Allied Processes Surface Forces Logistics Center Standard Specification 6310 (SFLC Std Spec 6310), 2014, Requirements for Preservation of Ship Structures

OTHER REFERENCES

None

3. REQUIREMENTS

3.1 General. The Contractor shall conform to all requirements specified in SFLC Std Spec 0000 and in this item, as applicable, during the performance of this availability.

NOTE

The requirements of paragraph 3.1 (General) applies to all work under the scope of this contract, whether explicitly stated in work items or not, and to all other work subsequently authorized by changes, modifications, or extensions to the contract.

2 (Rev-0)

3.2 Contractor-provided fire watch personnel. The Contractor shall provide fire watch personnel and equipment.

3.3 Preservation requirements. The Contractor shall accomplish all preservation tasks, including touch-ups, in accordance with SFLC Std Spec 6310.

3.3.1 Brand name approval. Ensure that all contractor-furnished coatings are in accordance with SFLC Std Spec 6310, Appendix C (Authorized Coatings for Use on Cutters and Boats).

3.3.2 Coating colors and system color schemes. Ensure that all colors and color coat/paint schemes are in accordance with COMDTINST M10360.3, Chapter 6 (Cutter and Boat Colors Exterior and Interior).

NOTE

Unless a waiver has been granted (in writing) by the KO, deviations from authorized coatings (listed in Appendix C of SFLC Std Spec 6310) and colors and color schemes (provided in Chapter 6 of COMDTINST M10360.3) are strictly prohibited.

3.4 Welding and brazing requirements. The Contractor shall perform all welding and allied processes, and NDI in accordance with SFLC Std Spec 0740.

3.5 Environmental protection requirements. The Contractor shall adhere to the following environmental protection requirements in accordance with the SFLC Stand Spec 0000:

3.5.1 Contractor operated (non USCG) facilities. The Contractor shall provide and maintain environmental protection as defined in SFLC Std Spec 0000 Appendix A, Requirements for Environmental Protection at Contractor Operated (Non USCG) Facilities, as applicable, during the performance of this availability. Contractor shall plan for and provide environmental protective measures to control pollution that develops during normal practice, as well as plan for and provide environmental protective measures required to correct conditions that develop during the project. Contractor shall comply with applicable Federal, state, and local laws, codes, ordinances, and regulations in their entirety. Any reference to a specific portion of a Federal, state, or local law, code, ordinance, or regulation in this or any other item shall not be construed to mean that relief is provided from any other sections of the law, code, ordinance, or regulation.

3.5.2 Test and procedures. The Contractor shall be required to promptly conduct tests and procedures for the purpose of assessing whether operations are in compliance with applicable Environmental Laws. Analytical work shall be done by qualified laboratories; and where required by law, the laboratories shall be certified.

3.5.3 Regulatory notifications. The Contractor shall be responsible for all regulatory notification requirements in accordance with Federal, State and local regulations. In cases where the Coast Guard must also provide public notification, such as storm water permitting, the Contractor must coordinate with the Contracting Officer or COR, and if work is being performed at a USCG Facility, the local Facility Engineer or Engineering Officer. The Contractor shall submit copies of all regulatory notifications to the Contracting Officer and the local Facility Engineer or Engineering Officer prior to commencement of work activities. Regulatory notifications shall be provided for including but not limited to demolition, renovation, National Pollutant Discharge Elimination System (NPDES) defined site work, and remediation of controlled substances such as asbestos, hazardous waste, and lead paint.

3.5.4 Environmental manager. The Contractor shall appoint in writing an Environmental Manager for the project, and shall be responsible for coordinating Contractor compliance with Federal, State, local, and station environmental requirements. The Environmental Manager shall ensure compliance with Hazardous Waste Program requirements, including hazardous waste handling, storage, manifesting, and disposal; implement the Contractors’ Environmental Management Plan; ensure that all environmental permits are obtained, maintained, 3 (Rev-0) and closed out; ensure compliance with Storm Water Program Management requirements; ensure compliance with Hazardous Materials including storage, handling, and reporting requirements; as well as coordinate any remediation of regulated substances such as lead, asbestos, and polychlorinated biphenyl (PCB). This may be a collateral position; however the individual must be trained to accomplish the following duties; ensure waste segregation and storage compatibility requirements are met; inspect and manage Satellite Accumulation areas;

ensure only authorized personnel add wastes to containers; ensure all Contractor personnel are trained in 40 CFR requirements and individual position requirements; coordinate removal of waste containers; and maintain the Environmental Records binder and required documentation, including environmental permits compliance and close-out.

3.5.5 HW disposal. Contractor shall comply with SFLC Std Spec 0000 Appendix A, Requirements For Environmental Protection At Contractor Operated (Non USCG) Facilities for HW disposal.

3.6 Local Policy. None.

3.7 SFLC standard specification approved changes. The Contractor shall be aware that the following are approved changes to published SFLC 2014 Edition Standard Specifications and supersede published content:

3.7.1 SFLC Standard Specification 6310, Requirements for Preservation of Ship Structures.

3.7.1.1 SFLC Std Spec 6310, page C-2, Section C1.5.1. Change from "lead-containing paint as 0.06%" to "lead-containing paint as 0.009%".

3.7.1.2 SFLC Std Spec 6310, page 4, Section 2 References, Group- Other References. Add “The Society for Protective Coatings (SSPC) Paint Application Guide No. 11, 2008, Protecting Edges, Crevices, and Irregular Steel Surfaces by Stripe Coating”

3.7.1.3 SFLC Std Spec 6310, page Appendix C-6, add "Hempel Hempadur Multi-Strength GF 35870" with FED- STD-595 color "Black/Red" under ANTI-ABRASION COATING, ICE BREAKING CAPABLE VESSELS, <235’.

3.7.1.4 Standard Spec 6310, page Appendix A-7, Under "UNDERWATER (U/W) BODY/BOOT-TOP", Add line Column 1: Option for U/W Body and Boot-Top, Steel Hulls, <154', in Salt Water. Column 2: Blank. Column 3:

SSPC-SP 10/NACE NO. 2 using grit conforming to MIL-A-22262 / (1.5-3.5) - or - SSPC-SP WJ-2(M)/NACE WJ-2(M). Columns 4 and 5: Same as "U/W Body and Boot-Top, Aluminum Hull, High Speed (>30 knots)".

3.7.2 SFLC Standard Specification 0000 General Requirements.

3.7.2.1 SFLC Std Spec 0000, paragraph 1.3 ‘Acronyms and term definitions’, page 5, “PCL (Paint Containing Lead)” definition replaced by, “Any paint or coating containing lead in excess of 0.009 percent by weight (1.0 mg/cm2 or 90 ppm). Lead Based Paint (LBP) is an interchangeable term with PCL.”

3.7.2.2 Change Std Spec 0000 paragraph 3.2.4.2.3(QP 1 inspector or tech rep duties) bullet, “Determine when applied coats have sufficiently cured for overcoating or for system service resumption (see paragraph

3.1.19 of SFLC Std Spec 6310 (Critical drying time requirements)).” to “Determine when applied coats have sufficiently cured for overcoating or for system service resumption (see paragraph 3.1.17 of SFLC Std Spec 6310 (Critical drying time requirements)).”

4 (Rev-0)

4. NOTES

4.1 QA inspection forms. QA inspection forms (QA-1 thru QA-5), required in SFLC Std Spec 6310 to be completed and submitted during preservation of “critical-coated surfaces”, are provided at the end of this document.

5 (Rev-0)

QA-1 - QUALITY ASSURANCE INSPECTION FORM

(PRESERVATION CHECKLIST)

VESSEL NAME HULL # WORK ITEM # WORK ITEM TITLE

LOCATION OF WORK (INCL. FRAME #’S) AREA (SQFT)

CHECKPOINT 1 – COATING SYSTEM COMPLIANCE

Ensure all coatings are in compliance with SFLC Std Spec 6310, Appendix C.

CHECKPOINT 2 - PAINT STORAGE

Ensure all coatings are kept at a temperature of 65 to 85°F at all times, unless otherwise specified by the coating mfgr.

CHECKPOINT 3 - AMBIENT CONDITIONS

Ensure surface and surrounding temperatures are each between 50 and 90°F for water-containing coatings, and 35 and 95°F for other coatings, unless otherwise specified by the coating manufacturer(s).

Ensure maximum relative humidity (RH) is as follows, from surface preparations through final curing of topcoat: 50% for tanks, voids, and vent plenum; and 85% for all other areas, unless otherwise specified by manufacturer(s).

Ensure surface temperature is at least 5°F above the dew point, unless otherwise specified by the coating mfgr.

CHECKPOINT 4 - PRE-SURFACE PREPARATION

Remove surface contaminants (soluble salts, loose rust, mud, and marine growth) with low pressure fresh water wash down (maximum 5,000 psi). If oil and grease are present, perform solvent cleaning, as per SSPC SP-1.

Verify equipment setup, blast media, and surface preparation methods match designated test coupon.

CHECKPOINT 5 - SURFACE PREPARATION

Verify environmental conditions (see CHECKPOINT 3).

Ensure cleanliness of prepared surface is as per specification (i.e.: SSPC SP-11, SP-10, SP WJ-2…).

Verify surface anchor profile using ASTM D4417-Methods B or C against SFLC Std Spec 6310. Conduct profile readings at a minimum of 5 locations for the first 1000-sqft area, and 2 locations for each succeeding 1000-sqft area.

Measure soluble salt conductivity in accordance with SSPC-Guide 15. Conduct 5 measurements per each 1000-sqft area (max. threshold: 70 microsiemens/cm for non-submerged surfaces, 30 microsiemens/cm for submerged surfaces).

CHECKPOINT 6 - PRIMER COAT APPLICATION

Verify environmental conditions (see CHECKPOINT 3).

Verify proper mixing and stand-in (induction) times.

Ensure no paint is applied when the temperature is expected to drop to freezing before the paint has dried.

Ensure surfaces are completely dry, unless otherwise allowed by the coating manufacturer(s).

Verify wet film thickness (WFT) at random, to prevent under or over application. Verify final DFT.

Brush out all runs, sags, drips, and puddles.

Perform visual inspection for holidays and other defects.

CHECKPOINT 7 – STRIPE COAT APPLICATION

Verify environmental conditions (see CHECKPOINT 3).

Ensure overcoating window is as per manufacturer’s instructions.

After primer coat (mist coat after inorganic zinc), brush-apply un-thinned coat of same primer paint over edges, weld seams, cut-outs, and areas of complex geometries @ 3-4 mils wet film thickness (WFT).

CHECKPOINT 8 – TOP COAT APPLICATION

Verify environmental conditions (see CHECKPOINT 3).

Ensure overcoating window is as per manufacturer’s instructions.

Verify proper mixing and stand-in (induction) times, as applicable.

Verify wet film thickness at random, to prevent under or over application.

Brush out all runs, sags, drips, and puddles.

CHECKPOINT 9 – FINAL INSPECTION

Verify final system dry film thickness. Conduct 5 sets of 3 readings for each of the first 3 100-sqft areas, followed by 5 sets of 3 readings for each succeeding 1000-sqft area.

Ensure that system cure is in accordance with manufacturer's recommendation for intended service.

Ensure potable water tank exhaust ventilation is maintained continuously from and during coating application through final system cure, to exhaust all solvent to the atmosphere and to prevent solvent entrapment.

For immersion coatings (including tank U/W body), record date and time of the following events:

Final coat application: _____/_____; Return to service or removal from environment controls: _____/_____

CHECKPOINT 10 – RECORD KEEPING

Complete, sign, and submit all provided QA Inspection Forms.

NAME OF QP-1/NACE INSPECTOR SIGNATURE CERT. # DATE / TIME

6 (Rev-0)

QA-2 - QUALITY ASSURANCE INSPECTION FORM

(ENVIRONMENTAL READINGS)

Use one sheet for each activity. Record conditions every four hours from before surface preparation to application of final coating system coat.

DATE

TIME

ACTIVITY (SURFACE

PREPARATION, PRIMER COAT,

BARRIER COAT, TOP COAT,

ETC…)

LOCATION (FRAME &

DECK, RELATION TO

EQUIPMENT, ETC.)

TEMPERATURE % REL.

HUMID-

ITY

DEW

PT.

SURFACE AMBIENT ΔT

| DP -

SURFACE |

7 (Rev-0)

QA-3a - QUALITY ASSURANCE INSPECTION FORM

(SURFACE PROFILE LOG FOR PROFILE MEASUREMENTS IAW ASTM D4417-METHOD-C)

SURFACE PREPARATION METHOD PROFILE ACHIEVED (MILS)

MIN MAX MEAN

SSPC-SP-10/NACE No. 2

SSPC-SP WJ-1/NACE WJ-1

SSPC-SP WJ-2/NACE WJ-2

SSPC-SP WJ-3/NACE WJ-3

SSPC-SP WJ-4/NACE WJ-4

SSPC-SP-3

SSPC-SP-11

SSPC-SP-11 (inaccessible area) Brush-blasting (non-metallic substrate)

A…