Amendment_00002_(05-09-2019).pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. CONTRACT ID CODE PAGE OF PAGES

1 2

2. AMENDMENT/MODIFICATION NO. 3. EFFECTIVE DATE 4 REQUISITION/PURCHASE REQ NO. PROJECT NO. (If applicable)

00002 05/09/2019 N/A

6. ISSUED BY Code 7. ADMINISTERED BY (If other than item 6.) Code N/A

Alissa Gavalian

USCG Surface Forces Logistics Center

300 East Main Street, Suite 550

Norfolk, VA 23510 757-628-4597

8. NAME AND ADDRESS OF CONTRACTOR (No., street, county, State and ZIP Code) 9A. AMENDMENT OF SOLICITATION NO.

70Z080-19-Q-P4589600

9B. DATED (SEE ITEM 11)

22 April 2019

10A. MODIFICATION OF CONTRACT/ORDER NO.

10B. DATED (SEE ITEM 13)

CODE FACILITY CODE

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in item 14. The hour and date specified for receipt of Offers _____ is extended __X__ is not extended .

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods: (a) By completing items 8 and 15, and returning 1 copy of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted; or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (if required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS,

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14. ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATION CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103 (b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER: (specify type of modification and authority)

E. IMPORTANT: Contractor is not is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

CGC MOHAWK DS1 FY19

The purpose of this Amendment is to answer a vendor’s questions:

See next page

15A. NAME AND TITLE OF SIGNER (Type or print) 16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print) Alissa Gavalian

15B. CONTRACTOR/OFFEROR (Same as Item 8) 15C. DATE SIGNED 16B. UNITED STATES OF AMERICA 16C. DATE SIGNED

BY

(Signature of person authorized to sign) (Signature of Contracting Officer) 05/09/2019

NSN 7540-01-152-8070 30-105 STANDARD FORM 30 (REV.1-83) 0224-3(10-90)

PREVIOUS EDITION UNUSABLE Prescribed by GSA

FAR (49 CFR) 53.243

Alissa Gavalian

QUESTION (1) WI-14, Auxiliary Sea Water System Valves and Piping, Renew, 1.1 Intent. This work item describes the requirements for the Contractor to renew auxiliary sea water system valves as designated in Table 1 and approximately

131 feet of auxiliary sea water system piping in the JP-5 Space (Compartment 4-186-0-J):

Table 1 calls out to renew (8) ea 1" valves and (1) ea 1-1/2" copper nickel valves. USCG DWG # 905-WMEC -256-001, list the valves as bronze not copper nickel.

Please clarify the material of the valves and type (gate, globe, ball) to be used.

Answer: The valves should be bronze not copper nickel, all the valves should be gate type.

QUESTION (2) WI-16, Compressed Air System Valves and Piping, Renew, 1.1 Intent. This work item describes the requirements for the Contractor to renew compressed air system valves as designated in Table 1 and approximately 433 linear feet of 1/”, 1”, and 1 ½” compressed air system piping in the Engine Room (Compartment 3-103-0-E).

Table 1 - Calls out to renew (2) each 1/4", (4) ea 1", and (2) ea 1-1/2" copper nickel valves. USCG DWG # 905-WMEC -

551-001, list the valves to be bronze not copper nickel.

Please clarify the material of the valves and type (gate, globe, ball) to be used.

Answer: Compressed Air WI is 15 not 16; Bronze or Stainless Steel is acceptable material for all the valves. ¼” valves should be ball type; 1” and 1 ½” valves can be ball or gate type.

QUESTION (3) WI-19, 1.1 Intent. This work item describes the requirements for the Contractor to overhaul/renew the following sea strainer(s):

Table 1 calls out ASW Cooling, 10” (1) ea., MSW Cooling, 6” (1) ea., EDG ASW Cooling ,5” (1)ea.

3.2 Renewal. The Contractor shall renew and test the designated strainers (see paragraph 1.1 (Intent)), shown on «DWG». The Contractor shall accomplish the following for each sea strainer in accordance with manufacturer’s recommendations:

Please clarify if the KTR is to overhaul or renew the sea strainers listed in Table 1.

Answer: Sea Strainers are WI 18 not 19; the contractor should try to overhaul the strainers first, if not successful renew the strainer(s).